It looks like we have tolerated creating mixed-width VMs since...
forever. However, that was never the intention, and we'd rather
not have to support that pointless complexity.
Forbid such a setup by making sure all the vcpus have the same
register width.
Reported-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210524170752.1549797-1-maz@kernel.org
Commit 26778aaa13 ("KVM: arm64: Commit pending PC adjustemnts before
returning to userspace") fixed the PC updating issue by forcing an explicit
synchronisation of the exception state on vcpu exit to userspace.
However, we forgot to take into account the case where immediate_exit is
set by userspace and KVM_RUN will exit immediately. Fix it by resolving all
pending PC updates before returning to userspace.
Since __kvm_adjust_pc() relies on a loaded vcpu context, I moved the
immediate_exit checking right after vcpu_load(). We will get some overhead
if immediate_exit is true (which should hopefully be rare).
Fixes: 26778aaa13 ("KVM: arm64: Commit pending PC adjustemnts before returning to userspace")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210526141831.1662-1-yuzenghui@huawei.com
Cc: stable@vger.kernel.org # 5.11
The X1 Carbon Gen 9 uses two fans instead of one like the previous
generation. This adds support for the second fan. It has been tested
on my X1 Carbon Gen 9 (20XXS00100) and works fine.
Signed-off-by: Til Jasper Ullrich <tju@tju.me>
Link: https://lore.kernel.org/r/20210525150950.14805-1-tju@tju.me
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The kernel prefers enabling fbc over the initial fb, since this leads to
actual runtime power savings, so if the initial fb is deemed too big
using some heuristic, then we simply skip allocating stolen for it.
However if the kernel is not configured with fbcon then it should be
possible to relax this, since unlike with fbcon the display server
shouldn't preserve it when later replacing it, and so we should be able
to re-use the stolen memory for fbc and friends. This patch is reported
to fix some flicker seen during boot splash on some devices.
v2: s/FRAMEBUFFER_CONSOLE/CONFIG_FRAMEBUFFER_CONSOLE
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526124901.245689-1-matthew.auld@intel.com
According to macronix website, there is no mx66l51235l part number.
The chip detected as such is actually mx66l51235f. Rename the flash.
Do not update the mx66l51235l name from the spi_nor_dev_ids[], since
there are dt that are using this compatible.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Intel Alder Lake-M has the same SPI serial flash controller as Alder
Lake-S. Add Alder Lake-M PCI ID to the driver list of supported devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
We have a few modparams which get conditionally exposed based on a Kconfig
options and in most cases this also means portions of the driver
implementing the respective feature are also left out.
Align the visibility of device level and global modparams to make them
consistent in this respect.
v2:
* Fix misplaced parentheses.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526141946.2347085-1-tvrtko.ursulin@linux.intel.com
bit-mask for pins 0 to 4 is BIT(0) to BIT(4) however we ended up with BIT(n - 1)
which is not right, and this was caught by below usban check
UBSAN: shift-out-of-bounds in drivers/gpio/gpio-wcd934x.c:34:14
Fixes: 59c3246834 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/udc-xilinx.c:802: warning: expecting prototype for xudc_ep_enable(). Prototype was for __xudc_ep_enable() instead
drivers/usb/gadget/udc/udc-xilinx.c:997: warning: expecting prototype for xudc_ep0_queue(). Prototype was for __xudc_ep0_queue() instead
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/ucsi/ucsi.c:1287: warning: expecting prototype for ucsi_get_drvdata(). Prototype was for ucsi_set_drvdata() instead
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/isp1760/isp1760-udc.c:150: warning: Function parameter or member 'udc' not described in 'isp1760_udc_select_ep'
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rui Miguel Silva <rui.silva@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/common/ulpi.c:151: warning: expecting prototype for ulpi_register_driver(). Prototype was for __ulpi_register_driver() instead
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/cdns3/cdnsp-gadget.c:59: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/udc.c:247: warning: expecting prototype for hw_is_port_high_speed(). Prototype was for hw_port_is_high_speed() instead
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/otg.c:25: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/chipidea/otg.c:78: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/chipidea/otg.c:143: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/core.c:343: warning: expecting prototype for _ci_usb_phy_exit(). Prototype was for ci_usb_phy_exit() instead
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: David Lopo <dlopo@chipidea.mips.com>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/cdns3/cdns3-ep0.c:680: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-ep0.c:775: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-ep0.c:868: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pawel Jez <pjez@cadence.com>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/cdns3/cdns3-gadget.c:163: warning: expecting prototype for select_ep(). Prototype was for cdns3_select_ep() instead
drivers/usb/cdns3/cdns3-gadget.c:2025: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2224: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2264: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2399: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2489: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2589: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2656: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2677: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2722: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2768: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2877: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2923: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/usb/cdns3/cdns3-gadget.c:2986: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pawel Jez <pjez@cadence.com>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/cdns3/core.c:342: warning: expecting prototype for cdsn3_role_get(). Prototype was for cdns_role_get() instead
drivers/usb/cdns3/core.c:428: warning: expecting prototype for cdns_probe(). Prototype was for cdns_init() instead
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce masks for the three RXESC fields (RBDS, F1DS, F0DS) and the
one TXESC field (TBDS). Update m_can_chip_config() to explicitly set all
four fields to the 64-byte option (0x7) (and these defs are renamed to
be more concise).
This is an improvement in maintainability, and also makes it easier to
implement more flexible configuration of the M_CAN buffers in the
future.
Link: https://lore.kernel.org/r/20210504125123.500553-4-torin@maxiluxsystems.com
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ensures that the different CCCR regmasks for m_can revs 3.0.x, 3.1.x,
3.2.x and 3.3.x are clearly distinguishable. Removes incorrect
CCCR_CANFD define. Adds bit fields UTSU and WMM for rev 3.3.x, for
completeness.
Link: https://lore.kernel.org/r/20210504125123.500553-3-torin@maxiluxsystems.com
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This updates m_can.c to exclusively use GENMASK, FIELD_GET, FIELD_PREP
and FIELD_MAX for regmask ops, as is convention in the current kernel
(far less error-prone, far more concise).
Link: https://lore.kernel.org/r/20210504125123.500553-2-torin@maxiluxsystems.com
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
With commit 132f2d45fb ("can: c_can: add support to 64 message
objects") the number of message objects used for reception /
transmission depends on FIFO size.
The ethtools API support allows you to retrieve this info. Driver info
has been added too.
Link: https://lore.kernel.org/r/20210514165549.14365-2-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The member rxmasked of struct c_can_priv is initialized by
c_can_chip_config(), but's it's never used, so remove it.
Link: https://lore.kernel.org/r/20210509124309.30024-2-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID to
USB_HYBRID_{,PRO_}2CANLIN_PRODUCT_ID, to reflect the channel count.
Link: https://lore.kernel.org/r/20210429093730.499263-1-extja@kvaser.com
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes the following clang warning, by marking the functions
as maybe unused. gcc doesn't complain about unused inline functions.
| drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c:564:1: warning: unused function 'mcp251xfd_chip_set_mode_nowait' [-Wunused-function]
| mcp251xfd_chip_set_mode_nowait(const struct mcp251xfd_priv *priv,
| ^
| 1 warning generated.
Link: https://lore.kernel.org/r/20210514153741.1958041-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch silences the following clang warning:
| drivers/net/can/spi/mcp251x.c:1333:17: warning: cast to smaller integer type
| 'enum mcp251x_model' from 'const void *' [-Wvoid-pointer-to-enum-cast]
| priv->model = (enum mcp251x_model)match;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 8de29a5c34 ("can: mcp251x: Make use of device property API")
Link: https://lore.kernel.org/r/20210504200520.1179635-2-mkl@pengutronix.de
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The value stored to ptr in the calculations this patch removes is not
used, so the calculation and the assignment can be removed.
Cleans up the following clang-analyzer warning:
drivers/net/can/softing/softing_main.c:279:3: warning: Value stored to
'ptr' is never read [clang-analyzer-deadcode.DeadStores].
drivers/net/can/softing/softing_main.c:242:3: warning: Value stored to
'ptr' is never read [clang-analyzer-deadcode.DeadStores].
Link: https://lore.kernel.org/r/1619520767-80948-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds an additional error message in case that txqueuelen is
set too small and advices the user to increase txqueuelen.
This is likely to happen even with small transfers if txqueuelen is at
default value 10 frames.
Link: https://lore.kernel.org/r/20210427052150.2308-4-menschel.p@posteo.de
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch changes the format string for errors from decimal %d to
symbolic error names %pe to achieve more comprehensive log messages.
Link: https://lore.kernel.org/r/20210427052150.2308-2-menschel.p@posteo.de
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The struct can_frame and struct canfd_frame intentionally share the
same layout to be able to write CAN frame content into a CAN FD frame
structure. When this is done the former differentiation via CAN_MTU /
CANFD_MTU is lost. CANFD_FDF allows programmers to mark CAN FD frames
in the case of using struct canfd_frame for mixed CAN/CAN FD
content (dual use).
N.B. the Kernel APIs do NOT provide mixed CAN / CAN FD content inside
of struct canfd_frame therefore the CANFD_FDF flag is disregarded by
Linux.
Link: https://lore.kernel.org/r/20170411134343.3089-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since an early version of the CAN-FD specification the bit that
defines a CAN-FD frame on the wire, has been renamed from Extended
Data Length (EDL) to FD Frame (FDF).
To avoid confusion, update the struct canfd_frame description in the
UAPI headers accordingly.
Link: https://lore.kernel.org/r/20210517113727.77597-1-mkl@pengutronix.de
Suggested-by: Ayoub Kaanich <kayoub5@live.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert the Renesas R-Car CAN FD Controller Device Tree binding
documentation to json-schema.
Document missing properties.
The CANFD clock needs to be configured for the maximum frequency on
R-Car V3M and V3H, too.
Update the example to match reality.
Link: https://lore.kernel.org/r/905134c87f72e2d8e37c309e0ce28ecd7d4f3992.1620323639.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert the Renesas R-Car CAN Controller Device Tree binding
documentation to json-schema.
Document missing properties.
Update the example to match reality.
Link: https://lore.kernel.org/r/561c35648e22a3c1e3b5477ae27fd1a50da7fe98.1620323639.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>