Use ratelimited print in mbox and cmq. And print mailbox operation if
mailbox fails because it's useful information for the user.
Link: https://lore.kernel.org/r/1617262341-37571-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add error code definition according to the return code from firmware to
help find out more detailed reasons why a command fails to be sent.
Link: https://lore.kernel.org/r/1617262341-37571-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix error of cmd's context number calculation algorithm to enable all of
32 cmd entries and support 32 concurrent accesses.
Link: https://lore.kernel.org/r/1617262341-37571-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- fix incorrect dereference of the ext_params2 external interrupt parameter,
which leads to an instant kernel crash if a pfault interrupt occurs.
- add forgotten stack unwinder support, and fix memory leak for the new
machine check handler stack.
- fix inline assembly register clobbering due to KASAN code instrumentation.
-----BEGIN PGP SIGNATURE-----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=ZH/N
-----END PGP SIGNATURE-----
Merge tag 's390-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix incorrect dereference of the ext_params2 external interrupt
parameter, which leads to an instant kernel crash if a pfault
interrupt occurs.
- add forgotten stack unwinder support, and fix memory leak for the
new machine check handler stack.
- fix inline assembly register clobbering due to KASAN code
instrumentation.
* tag 's390-5.12-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/setup: use memblock_free_late() to free old stack
s390/irq: fix reading of ext_params2 field from lowcore
s390/unwind: add machine check handler stack
s390/cpcmd: fix inline assembly register clobbering
unconditionally (Dmitry Osipenko)
- Remove the do_idle firmware call as it is not supported by the ATF
on tegra SoC (Dmitry Osipenko)
- Add a missing dependency on CONFIG_MMU to prevent linkage error (He
Ying)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmBvQ3UACgkQqDIjiipP
6E/qqQgAiZ7vmvPhPLXSGJljOKkMyhp0AMKXJPlpJzOLG1DeKrXbuJB4kEkDiExj
qN/cOL/hcQ+ErFxwmpoCRvz+Hg3gZEemdUQFLiSk+HXVAPCs9jmSpM36vZO80Vga
HMQk0NBs/rx0YWfq5XHPyuEf+/Z+gtsXxi88jrzwVqsHYokp/zX/KcrhslStpg1S
BWyY2Mgs5R+yxzCPgP6ARs11+EYyFxdUv6goRDf87xiCa+YBWcpYLDlqKsviMkRI
Qcjm68N200b80F5CLyF9tDSVAeSxcSrKcACr1sGJiI1VeGmjnoHFhuPFobyF3O5h
ubBVYRMZj1cvevbknsL1YBSeL/7ACg==
=MMFo
-----END PGP SIGNATURE-----
Merge tag 'cpuidle-v5.13-rc1' of https://git.linaro.org/people/daniel.lezcano/linux
Pull ARM cpuidle updates for v5.13 from Daniel Lezcano:
"- Fix the C7 state on the tegra114 by setting the L2-no-flush flag
unconditionally (Dmitry Osipenko)
- Remove the do_idle firmware call as it is not supported by the ATF
on tegra SoC (Dmitry Osipenko)
- Add a missing dependency on CONFIG_MMU to prevent linkage error (He
Ying)"
* tag 'cpuidle-v5.13-rc1' of https://git.linaro.org/people/daniel.lezcano/linux:
cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
cpuidle: tegra: Remove do_idle firmware call
cpuidle: tegra: Fix C7 idling state on Tegra114
Some Chromebooks use hard-coded interrupts in their ACPI tables.
This is an excerpt as dumped on Relm:
...
Name (_HID, "ELAN0001") // _HID: Hardware ID
Name (_DDN, "Elan Touchscreen ") // _DDN: DOS Device Name
Name (_UID, 0x05) // _UID: Unique ID
Name (ISTP, Zero)
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (BUF0, ResourceTemplate ()
{
I2cSerialBusV2 (0x0010, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2C1",
0x00, ResourceConsumer, , Exclusive,
)
Interrupt (ResourceConsumer, Edge, ActiveLow, Exclusive, ,, )
{
0x000000B8,
}
})
Return (BUF0) /* \_SB_.I2C1.ETSA._CRS.BUF0 */
}
...
This interrupt is hard-coded to 0xB8 = 184 which is too high to be mapped
to IO-APIC, so no triggering information is propagated as acpi_register_gsi()
fails and irqresource_disabled() is issued, which leads to erasing triggering
and polarity information.
Do not overwrite flags as it leads to erasing triggering and polarity
information which might be useful in case of hard-coded interrupts.
This way the information can be read later on even though mapping to
APIC domain failed.
Signed-off-by: Angela Czubak <acz@semihalf.com>
[ rjw: Changelog rearrangement ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All of the CPPC sysfs show functions are called via indirect call in
kobj_attr_show(), where they should be of type
ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr, char *buf);
because that is the type of the ->show() member in
'struct kobj_attribute' but they are actually of type
ssize_t (*show)(struct kobject *kobj, struct attribute *attr, char *buf);
because of the ->show() member in 'struct cppc_attr', resulting in a
Control Flow Integrity violation [1].
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf
3400
$ dmesg | grep "CFI failure"
[ 175.970559] CFI failure (target: show_highest_perf+0x0/0x8):
As far as I can tell, the only difference between 'struct cppc_attr'
and 'struct kobj_attribute' aside from the type of the attr parameter
is the type of the count parameter in the ->store() member (ssize_t vs.
size_t), which does not actually matter because all of these nodes are
read-only.
Eliminate 'struct cppc_attr' in favor of 'struct kobj_attribute' to fix
the violation.
[1]: https://lore.kernel.org/r/20210401233216.2540591-1-samitolvanen@google.com/
Fixes: 158c998ea4 ("ACPI / CPPC: add sysfs support to compute delivered performance")
Link: https://github.com/ClangBuiltLinux/linux/issues/1343
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that it is not necessary to call acpi_get_object_info() from
acpi_add_single_object() in order to pass the pointer returned by it
to acpi_init_device_object() and from there to acpi_set_pnp_ids().
It is more straightforward to call acpi_get_object_info() from
acpi_set_pnp_ids() and avoid unnecessary pointer passing, so change
the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Use the observation that the initial status check for
ACPI_BUS_TYPE_PROCESSOR objects can be carried out in the same way
as for ACPI_BUS_TYPE_DEVICE objects and it is not necessary to fail
acpi_add_single_object() if acpi_bus_get_status_handle() returns an
error for a processor (its status can be set to 0 instead) to
simplify acpi_add_single_object().
Accordingly, drop the "sta" argument from acpi_init_device_object()
as it can always set the initial status to ACPI_STA_DEFAULT and let
its caller correct that later on.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Move the initial status check for ACPI_BUS_TYPE_PROCESSOR objects
into acpi_add_single_object() so it is not necessary to pass the
"sta" argument to it, get rid of that argument from there and update
the callers of that function accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rearrange the checks in acpi_bus_check_add() to avoid checking
the "type" twice and take "check_dep" into account only for
ACPI_TYPE_DEVICE objects.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
There is only one caller of acpi_bus_type_and_status() which is
acpi_bus_check_add(), so fold the former into the latter and use
the observation that the initial status of the device is
ACPI_STA_DEFAULT in all cases except for ACPI_BUS_TYPE_PROCESSOR
to simplify the code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When CONFIG_ARM_QCOM_SPM_CPUIDLE is y and CONFIG_MMU is not set,
compiling errors are encountered as follows:
drivers/cpuidle/cpuidle-qcom-spm.o: In function `spm_dev_probe':
cpuidle-qcom-spm.c:(.text+0x140): undefined reference to `cpu_resume_arm'
cpuidle-qcom-spm.c:(.text+0x148): undefined reference to `cpu_resume_arm'
Note that cpu_resume_arm is defined when MMU is set. So, add dependency
on MMU in ARM_QCOM_SPM_CPUIDLE configuration.
Fixes: a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210406123328.92904-1-heying24@huawei.com
The do_idle firmware call is unused by all Tegra SoCs, hence remove it in
order to keep driver's code clean.
Tested-by: Anton Bambura <jenneron@protonmail.com> # TF701 T114
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210302095405.28453-2-digetx@gmail.com
Trusted Foundation firmware doesn't implement the do_idle call and in
this case suspending should fall back to the common suspend path. In order
to fix this issue we will unconditionally set the NOFLUSH_L2 mode via
firmware call, which is a NO-OP on Tegra30/124, and then proceed to the
C7 idling, like it was done by the older Tegra114 cpuidle driver.
Fixes: 14e086baca ("cpuidle: tegra: Squash Tegra114 driver into the common driver")
Cc: stable@vger.kernel.org # 5.7+
Reported-by: Anton Bambura <jenneron@protonmail.com> # TF701 T114
Tested-by: Anton Bambura <jenneron@protonmail.com> # TF701 T114
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210302095405.28453-1-digetx@gmail.com
Starting with Windows 8, Windows no longer uses the ACPI-video interface
for backlight control by default. Instead backlight control is left up
to the GPU drivers and these are typically directly accessing the GPU
for this instead of going through ACPI.
This means that the ACPI video interface is no longer being tested by
many vendors, which leads to false-positive /sys/class/backlight entries
on devices which don't have a backlight at all such as desktops or
top-set boxes. These false-positives causes desktop environments to show
a non functional brightness slider in various places.
Checking the LCD flag greatly reduces the amount of false-positives,
so commit 5928c28152 ("ACPI / video: Default lcd_only to true on
Win8-ready and newer machines") enabled the checking of this flag
by default on all win8 BIOS-es. But this let to regressions on some
models, so the check was made stricter adding a DMI chassis-type check
to only enable the LCD flag checking on desktop/server chassis.
Unfortunately the chassis-type reported in the DMI strings is not always
reliable. One class of devices where this is a problem is Intel Bay Trail-T
based top-set boxes / mini PCs / HDMI sticks. These are based on reference
designs which were targetets and the reference design BIOS code
is often used without changing the chassis-type to something more
appropriate.
There are many, many Bay Trail-T based devices affected by this, so DMI
quirking our way out of this is a bad idea. This patch takes a different
approach, Bay Trail-T (unlike regular Bay Trail) is an ACPI-reduced-hw
platform and ACPI-reduced-hw platforms generally don't have
an embedded-controller and thus will use a native (GPU specific) backlight
interface. This patch enables Checking the LCD flag by default on
ACPI-reduced-hw platforms with a win8 BIOS independent of the reported
chassis-type, fixing the false positive /sys/class/backlight entries
on these devices.
Note in hindsight I should have never added the DMI chassis-type check
when the enabling of LCD flag checking on Windows 8 BIOS-es let to some
regressions. Instead I should have added DMI quirks for the (presumably
few) models where the LCD flag check let to issues. But I'm afraid that
it is too late to change this now, changing this now will likely lead to
a bunch of regressions.
This patch was tested on a Mele PCG03 mini PC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a getter for the acpi_gbl_reduced_hardware variable so that modules
can check if they are running on an ACPI reduced-hw platform or not.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CONFIG_ARM64_VHE was introduced with ARMv8.1 (some 7 years ago),
and has been enabled by default for almost all that time.
Given that newer systems that are VHE capable are finally becoming
available, and that some systems are even incapable of not running VHE,
drop the configuration altogether.
Anyone willing to stick to non-VHE on VHE hardware for obscure
reasons should use the 'kvm-arm.mode=nvhe' command-line option.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210408131010.1109027-4-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It seems that the CPUs part of the SoC known as Apple M1 have the
terrible habit of being stuck with HCR_EL2.E2H==1, in violation
of the architecture.
Try and work around this deplorable state of affairs by detecting
the stuck bit early and short-circuit the nVHE dance. Additional
filtering code ensures that attempts at switching to nVHE from
the command-line are also ignored.
It is still unknown whether there are many more such nuggets
to be found...
Reported-by: Hector Martin <marcan@marcan.st>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210408131010.1109027-3-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some CPUs are broken enough that some overrides need to be rejected
at the earliest opportunity. In some cases, that's right at cpu
feature override time.
Provide the necessary infrastructure to filter out overrides,
and to report such filtered out overrides to the core cpufeature code.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210408131010.1109027-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Remove Harry Wei and <xiyoulinuxkernelgroup@googlegroups.com> from
MAINTAINERS Chinese Translation.
According to git logs, Harry Wei (aka WeiWei Jia)
* last submitted at 2012-05-07
commit a9e73211fb ("Fix a mistake sentence in the file 'Documentation/zh_CN/magic-number.txt'")
* last Reviewed-by at 2016-02-16
commit 45c73ea7a7 ("Documentation: Chinese translation of arm64/silicon-errata.txt")
* last Signed-off-by at 2019-03-13 (pick by Alex Shi)
commit 95dcdb6e12 ("docs/zh_CN: rename magic-numbers as rst doc")
According to mail list archives, Harry Wei
* last replied at 2016-02-15
<https://lore.kernel.org/lkml/CAD+1EGPFdoD7HHZYfEWVvmesXXG27n=6KmEZ8=B6nrvb+oaLZA@mail.gmail.com/>
* last appeared at 2018-05-12
<https://lore.kernel.org/lkml/CA+scX6kYH8Y9_f1PLcMHG-MD9bhXgd4gGpkJanjzvwwj9L=aOQ@mail.gmail.com/>
He/She did not maintain zh_CN translations for a long time.
<xiyoulinuxkernelgroup@googlegroups.com> is a maillist for Linux group of
Xi'an University of Posts and Telecommunications, not special for zh_CN
translation work.
Anyway, many thanks him/her and Xiyou for their contributions to the early
Chinese translation work!
Signed-off-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/20210329151551.GA10901@mipc
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
All the files in the riscv directory have been translated into
Chinese and it is time to add them to the zh_CN index.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20210406070239.19910-9-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
All the files in the iio directory have been translated into
Chinese and it is time to add them to the zh_CN index.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20210406070239.19910-8-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
All the files in the mips directory have been translated into
Chinese and it is time to add them to the zh_CN index.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20210406070239.19910-7-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
All the files in the cpu-freq directory have been translated into
Chinese and it is time to add them to the zh_CN index.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20210406070239.19910-6-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch translates Documention/cpu-freq/index.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20210406070239.19910-5-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch translates Documention/cpu-freq/cpufreq-stats.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20210406070239.19910-4-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch translates Documention/cpu-freq/cpu-drivers.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20210406070239.19910-3-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch translates Documention/cpu-freq/core.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20210406070239.19910-2-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Currently we require that software at a higher exception level initialise
all registers at the exception level the kernel will be entered prior to
starting the kernel in order to ensure that there is nothing uninitialised
which could result in an UNKNOWN state while running the kernel. The
expectation is that the software running at the highest exception levels
will be tightly coupled to the system and can ensure that all available
features are appropriately initialised and that the kernel can initialise
anything else.
There is a gap here in the case where new registers are added to lower
exception levels that require initialisation but the kernel does not yet
understand them. Extend the requirement to also include exception levels
below the one where the kernel is entered to cover this.
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210401180942.35815-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 FEAT_FGT extension introduces a set of traps to EL2 for accesses
to small sets of registers and instructions from EL1 and EL0. Currently
Linux makes no use of this feature, ensure that it is not active at boot by
disabling the traps during EL2 setup.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210401180942.35815-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 FEAT_FGT extension introduces a set of traps to EL2 for accesses
to small sets of registers and instructions from EL1 and EL0, access to
which is controlled by EL3. Require access to it so that it is
available to us in future and so that we can ensure these traps are
disabled during boot.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210401180942.35815-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change "occured" to "occurred" in kernel/power/autosleep.c.
Change "consiting" to "consisting" in kernel/power/snapshot.c.
Change "avaiable" to "available" in kernel/power/swap.c.
No functionality changed.
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is error message within devm_ioremap_resource
already, so remove the dev_err calls to avoid redundant
error messages.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Link: https://lore.kernel.org/linux-clk/20210408134856.207305-1-clare.chenhui@huawei.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Detailed description for this pull request:
1. Update devfreq core
- Register devfreq as a cooling device when adding devfreq device
basically if the flag of devfreq device is set as cooling device.
- Add missing unlock opeation in devfreq_add_device
- Use the next frequency as resume_freq instead of previous frequency
when using opp-suspend property
- Check whether .get_dev_status in struct devfreq_dev_profile is
implemented or not by devfreq driver before calling .get_dev_status
function.
2. Update devfreq driver
- Use dev_err_probe to simplify the error handling on rk3399_dmc.c
- Remove unused .get_dev_status function on imx8m-ddrc.c because
imx8m_ddrc_get_dev_status has not returend the any current status of
device.
- Remove unneeded of_match_ptr() from imx-bus.c and imx8m-ddrc.ca
- Add missing phandle informatioon and replace undefined variable
with integer value for rk3399_dmc.txt devicetree binding document.
3. Update minor issue
- Fix the wrong set_freq path of userspace governor in drivers/devfreq/Kconfig
- Remove the invalid description from .get_target_freq in struct
devfreq_dev_profile
-----BEGIN PGP SIGNATURE-----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=iKkL
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq updates for v5.13 from Chanwoo Choi:
"1. Update devfreq core
- Register devfreq as a cooling device when adding devfreq device,
basically if the flag of devfreq device is set as cooling device.
- Add missing unlock opeation in devfreq_add_device
- Use the next frequency as resume_freq instead of previous frequency
when using opp-suspend property
- Check whether .get_dev_status in struct devfreq_dev_profile is
implemented or not by devfreq driver before calling .get_dev_status
function.
2. Update devfreq drivers
- Use dev_err_probe to simplify the error handling on rk3399_dmc.c
- Remove unused .get_dev_status function on imx8m-ddrc.c because
imx8m_ddrc_get_dev_status has not returend the any current status
of the device.
- Remove unneeded of_match_ptr() from imx-bus.c and imx8m-ddrc.ca
- Add missing phandle informatioon and replace undefined variable
with integer value for rk3399_dmc.txt devicetree binding document.
3. Fix minor issues
- Fix the wrong set_freq path of userspace governor in
drivers/devfreq/Kconfig.
- Remove the invalid description from .get_target_freq in struct
devfreq_dev_profile."
* tag 'devfreq-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: imx8m-ddrc: Remove unneeded of_match_ptr()
PM / devfreq: imx-bus: Remove unneeded of_match_ptr()
PM / devfreq: imx8m-ddrc: Remove imx8m_ddrc_get_dev_status
PM / devfreq: Remove the invalid description for get_target_freq
PM / devfreq: Check get_dev_status in devfreq_update_stats
PM / devfreq: Fix the wrong set_freq path for userspace governor in Kconfig
dt-bindings: devfreq: rk3399_dmc: Remove references of unexistant defines
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle.
PM / devfreq: rk3399_dmc: Simplify with dev_err_probe()
PM / devfreq: Use more accurate returned new_freq as resume_freq
PM / devfreq: Unlock mutex and free devfreq struct in error path
PM / devfreq: Register devfreq as a cooling device on demand
Macro 'for_each_policy' has become unused since commit
f963735a3c ("cpufreq: Create for_each_{in}active_policy()"), so
remove it.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add PMU events for AMD Zen3 processors as documented in the AMD Processor
Programming Reference for Family 19h and Model 01h [1].
Below are the events which are new on Zen3:
PMCx041 ls_mab_alloc.{all_allocations|hardware_prefetcher_allocations|load_store_allocations}
PMCx043 ls_dmnd_fills_from_sys.ext_cache_local
PMCx044 ls_any_fills_from_sys.{mem_io_remote|ext_cache_remote|mem_io_local|ext_cache_local|int_cache|lcl_l2}
PMCx047 ls_misal_loads.{ma4k|ma64}
PMCx059 ls_sw_pf_dc_fills.ext_cache_local
PMCx05a ls_hw_pf_dc_fills.ext_cache_local
PMCx05f ls_alloc_mab_count
PMCx085 bp_l1_tlb_miss_l2_tlb_miss.coalesced_4k
PMCx0ab de_dis_cops_from_decoder.disp_op_type.{any_integer_dispatch|any_fp_dispatch}
PMCx0cc ex_ret_ind_brch_instr
PMCx18e ic_tag_hit_miss.{all_instruction_cache_accesses|instruction_cache_miss|instruction_cache_hit}
PMCx1c7 ex_ret_msprd_brnch_instr_dir_msmtch
PMCx28f op_cache_hit_miss.{all_op_cache_accesses|op_cache_miss|op_cache_hit}
Section 2.1.17.2 "Performance Measurement" of "PPR for AMD Family 19h,
Model 01h, Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021." lists
new metrics. Add them.
Preserve the events for Zen3 if they are measurable and non-zero as taken
from Zen2 directory even if the PPR of Zen3 [1] omits them. Those events
are the following:
PMCx000 fpu_pipe_assignment.{total|total0|total1|total2|total3}
PMCx004 fp_num_mov_elim_scal_op.{optimized|opt_potential|sse_mov_ops_elim|sse_mov_ops}
PMCx02D ls_rdtsc
PMCx040 ls_dc_accesses
PMCx046 ls_tablewalker.{iside|ic_type1|ic_type0|dside|dc_type1|dc_type0}
PMCx061 l2_request_g2.{group1|ls_rd_sized|ls_rd_sized_nc|ic_rd_sized|ic_rd_sized_nc|smc_inval|bus_lock_originator|bus_locks_responses}
PMCx062 l2_latency.l2_cycles_waiting_on_fills
PMCx063 l2_wcb_req.{wcb_write|wcb_close|zero_byte_store|cl_zero}
PMCx06d l2_fill_pending.l2_fill_busy
PMCx080 ic_fw32
PMCx081 ic_fw32_miss
PMCx086 bp_snp_re_sync
PMCx087 ic_fetch_stall.{ic_stall_any|ic_stall_dq_empty|ic_stall_back_pressure}
PMCx08a bp_l1_btb_correct
PMCx08c ic_cache_inval.{l2_invalidating_probe|fill_invalidated}
PMCx099 bp_tlb_rel
PMCx0a9 de_dis_uop_queue_empty_di0
PMCx0c7 ex_ret_brn_resync
PMCx28a ic_oc_mode_switch.{oc_ic_mode_switch|ic_oc_mode_switch}
L3PMCx01 l3_request_g1.caching_l3_cache_accesses
L3PMCx06 l3_comb_clstr_state.{other_l3_miss_typs|request_miss}
[1] Processor Programming Reference (PPR) for AMD Family 19h, Model 01h,
Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021.
[2] Processor Programming Reference (PPR) for AMD Family 17h Model 71h,
Revision B0 Processors, 56176 Rev 3.06 - Jul 17, 2019.
[3] Processor Programming Reference (PPR) for AMD Family 17h Models
01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019.
All of the PPRs can be found at:
https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-5-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use 0x%02x format for all event codes and umasks as this helps in tracking
changes of automatically generated event tables.
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-4-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The values of event codes and umasks are inconsistent with letter cases.
Enforce a unique style and default everything to lower case as this
helps in tracking changes of automatically generated event tables.
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 08ed77e414 ("perf vendor events amd: Add recommended events")
added the hits event "L2 Cache Hits from L2 HWPF" with the same metric
expression as the accesses event "L2 Cache Accesses from L2 HWPF":
$ perf list --details
...
l2_cache_accesses_from_l2_hwpf
[L2 Cache Accesses from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
l2_cache_hits_from_l2_hwpf
[L2 Cache Hits from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
...
This was wrong and led to counting hits the same as accesses. Section
2.1.15.2 "Performance Measurement" of "PPR for AMD Family 17h Model 31h
B0 - 55803 Rev 0.54 - Sep 12, 2019", documents the hits event with
EventCode 0x70 which is the same as l2_pf_hit_l2.
Fix this, and massage the description for l2_pf_hit_l2 as the hits event
is now the duplicate of l2_pf_hit_l2. AMD recommends using the recommended
event over other events if the duplicate exists and maintain both for
consistency. Hence, l2_cache_hits_from_l2_hwpf should override
l2_pf_hit_l2.
Before:
# perf stat -M l2_cache_accesses_from_l2_hwpf,l2_cache_hits_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
1,436 l2_pf_miss_l2_l3 # 11114.00 l2_cache_accesses_from_l2_hwpf
# 11114.00 l2_cache_hits_from_l2_hwpf
4,482 l2_pf_hit_l2
5,196 l2_pf_miss_l2_hit_l3
1.001765339 seconds time elapsed
After:
# perf stat -M l2_cache_accesses_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
1,477 l2_pf_miss_l2_l3 # 10442.00 l2_cache_accesses_from_l2_hwpf
3,978 l2_pf_hit_l2
4,987 l2_pf_miss_l2_hit_l3
1.001491186 seconds time elapsed
# perf stat -e l2_cache_hits_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
3,983 l2_cache_hits_from_l2_hwpf
1.001329970 seconds time elapsed
Note the difference in performance counter values for the accesses
versus the hits after the fix, and the hits event now counting the same
as l2_pf_hit_l2.
Fixes: 08ed77e414 ("perf vendor events amd: Add recommended events")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> # On a 3900X
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add L1 metrics. Formula is as consistent as possible with MAN pages
description for these metrics.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-5-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to find the common PMU map for the system.
For arm64, a special variant is added. This is because arm64 supports
heterogeneous CPU systems. As such, it cannot be guaranteed that the
cpumap is same for all CPUs. So in case of heterogeneous systems, don't
return a cpumap.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pmu-events parsing test does not handle metric reuse at all.
Introduce some simple handling to resolve metrics who reference other
metrics.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/1617791570-165223-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function find_metric() is required for the metric processing in the
pmu-events testcase, so make it public. Also change the name to include
"metricgroup".
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/1617791570-165223-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>