According to the HW manual, the query operation is unnecessary
when the TM QCN error event is enabled, so remove it.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vmdq is not supported yet, the num_vmdq_vport is always 0,
it's a bit confusing when using the num_vport, so remove
these unused codes of vmdq.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SGX driver can accurately track how enclave pages are used. This
enables SECS to be specifically targeted and EREMOVE'd only after all
child pages have been EREMOVE'd. This ensures that SGX driver will
never encounter SGX_CHILD_PRESENT in normal operation.
Virtual EPC is different. The host does not track how EPC pages are
used by the guest, so it cannot guarantee EREMOVE success. It might,
for instance, encounter a SECS with a non-zero child count.
Add a definition of SGX_CHILD_PRESENT. It will be used exclusively by
the SGX virtualization driver to handle recoverable EREMOVE errors when
saniziting EPC pages after they are freed.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/050b198e882afde7e6eba8e6a0d4da39161dbb5a.1616136308.git.kai.huang@intel.com
EREMOVE takes a page and removes any association between that page and
an enclave. It must be run on a page before it can be added into another
enclave. Currently, EREMOVE is run as part of pages being freed into the
SGX page allocator. It is not expected to fail, as it would indicate a
use-after-free of EPC pages. Rather than add the page back to the pool
of available EPC pages, the kernel intentionally leaks the page to avoid
additional errors in the future.
However, KVM does not track how guest pages are used, which means that
SGX virtualization use of EREMOVE might fail. Specifically, it is
legitimate that EREMOVE returns SGX_CHILD_PRESENT for EPC assigned to
KVM guest, because KVM/kernel doesn't track SECS pages.
To allow SGX/KVM to introduce a more permissive EREMOVE helper and
to let the SGX virtualization code use the allocator directly, break
out the EREMOVE call from the SGX page allocator. Rename the original
sgx_free_epc_page() to sgx_encl_free_epc_page(), indicating that
it is used to free an EPC page assigned to a host enclave. Replace
sgx_free_epc_page() with sgx_encl_free_epc_page() in all call sites so
there's no functional change.
At the same time, improve the error message when EREMOVE fails, and
add documentation to explain to the user what that failure means and
to suggest to the user what to do when this bug happens in the case it
happens.
[ bp: Massage commit message, fix typos and sanitize text, simplify. ]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20210325093057.122834-1-kai.huang@intel.com
mlx5e netdev driver updates:
1) Some cleanups from Colin, Tariq and Saeed.
2) Aya made some trivial refactoring to cleanup and generalize
PTP and RQ (Receive Queue) creation and management.
Mostly code decoupling and reducing dependencies between the different
RX objects in the netdev driver.
This is a preparation series for upcoming PTP special RQ creation which
will allow coexistence of CQE compression (important performance feature,
especially in Multihost systems) and HW TS PTP.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmBdS+oACgkQSD+KveBX
+j58TQf+IETlDQGSsl/FyTFdK+d9xz5773QrO1FZg4h23kMY+GM9T0fEph0CIqjR
ZZNDbzFX8DN/eywpWVWEM3ADi+j9a3JwE0JTK11R94Pmb3VrCCJJOftMMt7hdA03
YHEiZcmMrFUqIiXmUYI3mxdY1edj318ICus8AGXVyqR/dnrEXu82IxLGJ8v27Pn0
8ZBvWqyQNlvVe25OTB7POJtIFZ6X/WSDcC22BVfaRgyvD62IjxAwCuCWQX3GYbPT
qjb7rnpRltJaSncsNn+O1c09y3i76btMKkUlNkvqYsn94PHlXVZE8zYg0p9Nsvg4
tgbwDY9Ng2a08+tDICx/sZ+FbaDkbw==
=jAuK
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-03-24
mlx5e netdev driver updates:
1) Some cleanups from Colin, Tariq and Saeed.
2) Aya made some trivial refactoring to cleanup and generalize
PTP and RQ (Receive Queue) creation and management.
Mostly code decoupling and reducing dependencies between the different
RX objects in the netdev driver.
This is a preparation series for upcoming PTP special RQ creation which
will allow coexistence of CQE compression (important performance feature,
especially in Multihost systems) and HW TS PTP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
[why]
MST topology print was missing fec logging and pdt printed
as an int wasn't clear. vcpi and payload info was printed as an
arbitrary series of ints which requires user to know the ordering
of the prints, making the logs difficult to use.
[how]
-add fec logging
-add pdt parsing into strings
-format vcpi and payload info into tables with headings
-clean up topology prints
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325180614.37060-1-eryk.brol@amd.com
Increment the mgmt revision due to recent changes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The list of trusted events should contain the advertisement monitor
events and not the untrusted one, so move entries to the correct list.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The list of supported mgmt commands for PHY configuration is missing, so
just add them.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The read advertising features error handling returns false the opcode
for the set advertising command.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The return error when trying to change the setting when a controller is
powered up, shall be MGMT_STATUS_REJECTED. However instead now the error
MGMT_STATUS_NOT_POWERED is used which is exactly the opposite.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The example in video-interfaces.yaml uses a bunch of undocumented
bindings which will cause warnings when undocumented compatible checks
are enabled. The example could be fixed to use documented bindings, but
doing so would just duplicate other examples. So let's just remove the
example.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20210324202253.3576798-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmBeMf0THHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlr1B/9Jh6YUtTe1dN5rCEPheikFwcsDgoYk
zfgeS57GHv/rzQ9hdVPBqHvc4ZjEZ7hLkV8Pa0eyyDnslwHfH/B8/38LVSdOe1QK
52787CXTAcBHjnEzGbs2TP2oGhHQ4rN9h6lMKzs3jcglWunutHKnesAXGC3yItsr
WzYzskiL/gpS+Px936JVVjJirzKFX1jnbXZ4BMq3/7vqu5DJ8M+2mrf4H1wxfIMP
NeV40j4vAkqJKbQyVFYfzRdXxP+FswR9kLHQv96RW0y98JDg7h5TtYGrAaRZdpRw
HQ+96/dZWyH2MpJ5nptSIVbU71u9EtLuRCa5HhB903p14NQsrR0qGBfc
=YT+2
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's optional argument processing.
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
* tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm ioctl: fix out of bounds array access when no devices
dm: don't report "detected capacity change" on device creation
dm table: Fix zoned model check and zone sectors check
dm verity: fix DM_VERITY_OPTS_MAX value
The previous attempt to properly handle literal blocks broke parsing of
parameter lines containing colons; fix it by tweaking the regex to
specifically exclude the "::" pattern while accepting lines containing
colons in general. Add a little documentation to the regex while in the
neighborhood.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 8d295fbad6 ("kernel-doc: better handle '::' sequences")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a new flag "reset_recalculate" that will restart recalculating
from the beginning of the device. It can be used if we want to change
the hash function. Example:
dmsetup remove_all
rmmod brd
set -e
modprobe brd rd_size=1048576
dmsetup create in --table '0 2000000 integrity /dev/ram0 0 16 J 2 internal_hash:sha256 recalculate'
sleep 10
dmsetup status
dmsetup remove in
dmsetup create in --table '0 2000000 integrity /dev/ram0 0 16 J 2 internal_hash:sha3-256 reset_recalculate'
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit ff9ea32381 ("block, bdi: an active gendisk always has a
request_queue associated with it") the request_queue pointer returned
from bdev_get_queue() shall never be NULL.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit ff9ea32381 ("block, bdi: an active gendisk always has a
request_queue associated with it") the request_queue pointer returned
from bdev_get_queue() shall never be NULL.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
These are only used by DM core, DM target modules should only use
dm_{get,put}_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we set non-empty param->name or param->uuid on the DM_LIST_DEVICES_CMD
ioctl, the set values are considered filter prefixes. The ioctl will only
return entries with matching name or uuid prefix.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When LVM needs to find a device with a particular UUID it needs to ask for
UUID for each device. This patch returns UUID directly in the list of
devices, so that LVM doesn't have to query all the devices with an ioctl.
The UUID is returned if the flag DM_UUID_FLAG is set in the parameters.
Returning UUID is done in backward-compatible way. There's one unused
32-bit word value after the event number. This patch sets the bit
DM_NAME_LIST_FLAG_HAS_UUID if UUID is present and
DM_NAME_LIST_FLAG_DOESNT_HAVE_UUID if it isn't (if none of these bits is
set, then we have an old kernel that doesn't support returning UUIDs). The
UUID is stored after this word. The 'next' value is updated to point after
the UUID, so that old version of libdevmapper will skip the UUID without
attempting to interpret it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For high numbers of DM devices the 64-entry hash table has non-trivial
overhead. Fix this by replacing the hash table with a red-black tree.
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If more than one one handling mode is requested during DM verity table
load, the last requested mode will be used.
Change this to impose more strict checking so that the table load will
fail if more than one error handling mode is requested.
Signed-off-by: JeongHyeon Lee <jhs2.lee@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove useless "while" loop. If the condition ci.sector_count && !error is
true, we go to a branch that ends with "break". If this condition is
false, the "while" loop will not be executed again. So, the loop can't be
executed more than once.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.
Generated by: scripts/coccinelle/misc/flexible_array.cocci
CC: Denis Efremov <efremov@linux.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.
Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum).
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu).
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=Wi4B
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a memory management regression in ACPICA, repair an ACPI
blacklist entry damaged inadvertently during the 5.11 cycle and fix
the bookkeeping of devices with the same primary device ID in the ACPI
core.
Specifics:
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum)
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu)
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko)"
* tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Always create namespace nodes using acpi_ns_create_node()
ACPI: scan: Use unique number for instance_no
ACPI: video: Add missing callback back for Sony VPCEH3U1E
- Modify the runtime PM device suspend to avoid suspending
supplier devices before the consumer device's status changes
to RPM_SUSPENDED (Rafael Wysocki).
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----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=9csw
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an issue related to device links in the runtime PM framework
and debugfs usage in the Energy Model code.
Specifics:
- Modify the runtime PM device suspend to avoid suspending supplier
devices before the consumer device's status changes to
RPM_SUSPENDED (Rafael Wysocki)
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba)"
* tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: postpone creating the debugfs dir till fs_initcall
PM: runtime: Defer suspending suppliers
Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to fix a
kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with
fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to
fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=LBps
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to
fix a kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25
with fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board
to fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27
SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for
am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates"
* tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer
MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers.
MAINTAINERS: Update some st.com email addresses to foss.st.com
ARM: dts: imx6ull: fix ubi filesystem mount failed
ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
arm64: dts: ls1012a: mark crypto engine dma coherent
arm64: dts: ls1043a: mark crypto engine dma coherent
arm64: dts: ls1046a: mark crypto engine dma coherent
ARM: imx: avic: Convert to using IRQCHIP_DECLARE
ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
ARM: dts: at91-sama5d27_som1: fix phy address to 7
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYF37OgAKCRCAXGG7T9hj
vp8hAP4h7mvjfkntbFXagrJK9pi2xVC9d/YO5nfa8/K3LcGVnQD/fKcU9ggPN9vI
GLnhyprGLcCA4aTL6Ogb37o9fDd4Yws=
=joIg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains a small series with a more elegant fix of a problem
which was originally fixed in rc2"
* tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"
xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG
msm:
- pll fixes
- shutdown hook fix
- runtime resume fix
- clear_oob fix
- kms locking fix
- display aux retry fix
rcar-du:
- warn_on in encoder init fix
etnaviv:
- Use FOLL_FORCE and FOLL_LONGTERM
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJgXVVAAAoJEAx081l5xIa+KGUP/2PaWOkYrEnZHOKAzTDethpQ
e5SzfbK7ywDsM4vPHrz+RnJqa269xkddXaEYzajilrN6/Mmj56pyRrMWRD040E3a
fL5DSmEJtotFqlSRZxeZ+NZQpTLY0ujIBcAiOs1c7JOKbIeUXByZTIL0L0joOAcW
ASVWOjet6ptWj/t2VNTh/7Lkh6vOE9NpyeMVIgx1D4ep5LTO164WMdfqZshEWVXq
IlDgO9cQ5MRl/S3oxs0PJ42lQZMGPlKHTmvch5GgybKit16Ah4XE4Ur+ND7TB7nu
yeN9+geD2spxnZjRpjPZkzFO/kdAeEoSy4fR6RmmdlyfKyPaIBbL2VL6Ox2L+x1W
H4D+Gl5D1yX38Tp3XO/XoxVMQTdi3EdBP+9piGvqIR+cGJApjP+FjwiWrl1/IPCb
eSRjzgaTQlSCTOevmjEggRY7g2krrMvb8eVfg1T2QxdM6EEloCbBui5RJEUoMErj
+FyLXBWXJSAlbvfjeIKi1id3ZydL17Y3Hsm5bbmMCjyiWnQvGqS6Ia0BZC+Wan30
+hlKkJnVJakiycAvoU/i4bsAPLmzrfIrFRPe6HepLczX0t7Srz7X37SdoSko6a07
6c8Y1nCMxj6gMhblB6MTK5/5PIu4xPJ0wTt/kppTS3UESu3TlnJsG8s/I8BcttDc
fewkz0IkO9JRSfp9Cxs3
=S23m
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As expected last week things were overly quiet so this week things
seem to have caught up. It still isn't too major.
msm and amdgpu lead the size here, the msm fixes are pretty varied
across the driver, the amdgpu one is mostly the S0ix fixes with some
other minor ones. Otherwise there are a few i915 fixes and one each
for nouveau, etnaviv and rcar-du.
msm:
- pll fixes
- shutdown hook fix
- runtime resume fix
- clear_oob fix
- kms locking fix
- display aux retry fix
rcar-du:
- warn_on in encoder init fix
etnaviv:
- Use FOLL_FORCE and FOLL_LONGTERM
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors"
* tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128
drm/i915: Fix the GT fence revocation runtime PM logic
drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x
drm/amdgpu: Add additional Sienna Cichlid PCI ID
drm/amd/pm: workaround for audio noise issue
drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcoders
drm/i915: Fix enabled_planes bitmask
drm/i915: Disable LTTPR support when the LTTPR rev < 1.4
drm/i915: Disable LTTPR support when the DPCD rev < 1.4
drm/i915/ilk-glk: Fix link training on links with LTTPRs
drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume
drm/amdgpu: skip kfd suspend/resume for S0ix
drm/amdgpu: drop S0ix checks around CG/PG in suspend
drm/amdgpu: skip CG/PG for gfx during S0ix
drm/amdgpu: update comments about s0ix suspend/resume
drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend
drm/amdgpu: re-enable suspend phase 2 for S0ix
drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3)
drm/amdgpu: clean up non-DC suspend/resume handling
drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)
...
Dan's address bounces, and has been bouncing for some time as he moved
to other projects.
I believe TI should be more careful with this, and should assign
alternate contacts for their drivers.
Anyway what we can do now is to remove the obsolete address.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Print the path name of the swapfile that failed to active to ease
debugging the problem and to avoid a scare if xfstests hits these
cases. Also reword one warning a bit, as the error is not about
a file being on multiple devices, but one that has at least an
extent outside the main device known to the VFS and swap code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The comments for clk_core_determine_round_nolock() contain a double
"if": one at the end of a line, followed by another one at the beginning
of the next line. Drop the former.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210326120833.1578153-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is a spelling mistake in a comment. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the following command produces an error message:
linux# make kselftest TARGETS=bpf O=/mnt/linux-build
# selftests: bpf: test_libbpf.sh
# ./test_libbpf.sh: line 23: ./test_libbpf_open: No such file or directory
# test_libbpf: failed at file test_l4lb.o
# selftests: test_libbpf [FAILED]
The error message might not affect the return code of make, therefore
one needs to grep make output in order to detect it.
This is not the only instance of the same underlying problem; any test
with more than one element in $(TEST_PROGS) fails the same way. Another
example:
linux# make O=/mnt/linux-build TARGETS=splice kselftest
[...]
# ./short_splice_read.sh: 15: ./splice_read: not found
# FAIL: /sys/module/test_module/sections/.init.text 2
not ok 2 selftests: splice: short_splice_read.sh # exit=1
The current logic prepends $(OUTPUT) only to the first member of
$(TEST_PROGS). After that, run_one() does
cd `dirname $TEST`
For all tests except the first one, `dirname $TEST` is ., which means
they cannot access the files generated in $(OUTPUT).
Fix by using $(addprefix) to prepend $(OUTPUT)/ to each member of
$(TEST_PROGS).
Fixes: 1a940687e4 ("selftests: lib.mk: copy test scripts and test files for make O=dir run")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to avoid race with f2fs_do_replace_block().
Fixes: f5a53edcf0 ("f2fs: support aligned pinned file")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the alloc_type of the original curseg is LFS,
when we change_curseg and then do recover curseg,
the alloc_type becomes SSR.
Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Do a trivial typo fix.
s/runing/running
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With the default DPOLICY_BG discard thread is ioaware, which prevents
the discard thread from issuing the discard commands. On low RAM setups,
it is observed that these discard commands in the cache are consuming
high memory. This patch aims to relax the memory pressure on the system
due to f2fs pending discard cmds by changing the policy to DPOLICY_FORCE
based on the nm_i->ram_thresh configured.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR
mode to select victim:
1. LFS is set to find source section during GC, the victim should have
no checkpointed data, since after GC, section could not be set free for
reuse.
Previously, we only check valid chpt blocks in current segment rather
than section, fix it.
2. SSR | AT_SSR are set to find target segment for writes which can be
fully filled by checkpointed and newly written blocks, we should never
select such segment, otherwise it can cause panic or data corruption
during allocation, potential case is described as below:
a) target segment has 'n' (n < 512) ckpt valid blocks
b) GC migrates 'n' valid blocks to other segment (segment is still
in dirty list)
c) GC migrates '512 - n' blocks to target segment (segment has 'n'
cp_vblocks and '512 - n' vblocks)
d) If GC selects target segment via {AT,}SSR allocator, however there
is no free space in targe segment.
Fixes: 4354994f09 ("f2fs: checkpoint disabling")
Fixes: 093749e296 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Both the caller and the supplier's source file should have access to
the include file containing the prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
1637 | void at91_pinctrl_gpio_suspend(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
1661 | void at91_pinctrl_gpio_resume(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Cc: Russell King <linux@armlinux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210303124149.3149511-1-lee.jones@linaro.org
The device is got by isert_device_get() with refcount is 1, and is
assigned to isert_conn by
isert_conn->device = device.
When isert_create_qp() failed, device will be freed with
isert_device_put().
Later, the device is used in isert_free_login_buf(isert_conn) by the
isert_conn->device->ib_device statement.
Free the device in the correct order.
Fixes: ae9ea9ed38 ("iser-target: Split some logic in isert_connect_request to routines")
Link: https://lore.kernel.org/r/20210322161325.7491-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The name string for BPF_XOR is "xor", not "or". Fix it.
Fixes: 981f94c3e9 ("bpf: Add bitwise atomic instructions")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/bpf/20210325134141.8533-1-xukuohai@huawei.com
This adds a selftest to check that the verifier rejects a TCP CC struct_ops
with a non-GPL license.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210326100314.121853-2-toke@redhat.com