Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of efuse-related functions have an "efuse type" parameter.
This type is not used and can be removed.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fail the usb interface initialization if dev_alloc_name returns an error.
Other wlan drivers like natsemi or atmel use the same error handling.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_read_port prepares a bulk in urb and calls usb_submit_urb to pass the
usb to the usb core. It seems wrong that usb_read_port returns success to
its caller if usb_submit_urb failed with -EPERM.
According to drivers/usb/core/urb.c, usb_submit_urb returns -EPERM when
an urb is resubmitted after being cancelled by usb_kill_urb etc.
The only caller who checks the return value of usb_read_port is
rtw_hal_inirp_init. This function submits the bulk in urbs for the first
time after the netdevice is opened. We'll not receive -EPERM from
usb_submit_urb in this case. The urbs are resubmitted by
read_port_complete, which does not check for errors from usb_read_port.
This driver may kill pending bulk in urbs when the netdevice is closed when
the driver is unloaded or the system goes to sleep. I don't think that this
will interrupt an ongoing netdev open.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620174057.10201-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove block comment about function HwSuspendModeEnable92Cu.
The comment contains no useful information and there is even
no HwSuspendModeEnable92Cu function in the driver code.
'git grep -n HwSuspendModeEnable92Cu drivers/staging/rtl8188eu'
returns nothing.
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210619175055.5122-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update booting requirements for the FEAT_HCX feature, added to v8.7 of
the architecture.
* for-next/docs:
arm64: Document requirement for access to FEAT_HCX
Fix resume from idle when pNMI is being used.
* for-next/cpuidle:
arm64: suspend: Use cpuidle context helpers in cpu_suspend()
PSCI: Use cpuidle context helpers in psci_cpu_suspend_enter()
arm64: Convert cpu_do_idle() to using cpuidle context helpers
arm64: Add cpuidle context save/restore helpers
Additional CPU sanity checks for MTE and preparatory changes for systems
where not all of the CPUs support 32-bit EL0.
* for-next/cpufeature:
arm64: Restrict undef hook for cpufeature registers
arm64: Kill 32-bit applications scheduled on 64-bit-only CPUs
KVM: arm64: Kill 32-bit vCPUs on systems with mismatched EL0 support
arm64: Allow mismatched 32-bit EL0 support
arm64: cpuinfo: Split AArch32 registers out into a separate struct
arm64: Check if GMID_EL1.BS is the same on all CPUs
arm64: Change the cpuinfo_arm64 member type for some sysregs to u64
Big cleanup of our cache maintenance routines, which were confusingly
named and inconsistent in their implementations.
* for-next/caches:
arm64: Rename arm64-internal cache maintenance functions
arm64: Fix cache maintenance function comments
arm64: sync_icache_aliases to take end parameter instead of size
arm64: __clean_dcache_area_pou to take end parameter instead of size
arm64: __clean_dcache_area_pop to take end parameter instead of size
arm64: __clean_dcache_area_poc to take end parameter instead of size
arm64: __flush_dcache_area to take end parameter instead of size
arm64: dcache_by_line_op to take end parameter instead of size
arm64: __inval_dcache_area to take end parameter instead of size
arm64: Fix comments to refer to correct function __flush_icache_range
arm64: Move documentation of dcache_by_line_op
arm64: assembler: remove user_alt
arm64: Downgrade flush_icache_range to invalidate
arm64: Do not enable uaccess for invalidate_icache_range
arm64: Do not enable uaccess for flush_icache_range
arm64: Apply errata to swsusp_arch_suspend_exit
arm64: assembler: add conditional cache fixups
arm64: assembler: replace `kaddr` with `addr`
The SM4250 and SM6115 uses the same register layout as MSM8996, but the
tune sequence is a bit different.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210622203240.559979-4-iskren.chernev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This compatible string is for the HS USB PHY on sm4250 and sm6115
platforms.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210622203240.559979-3-iskren.chernev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be
a CDC-ACM device in its descriptors but in fact is not. If it is run
with echo disabled it returns garbled data, probably due to something
that happens in the TTY layer. And when run with echo enabled (the
default), it will mess up the calibration data of the sensor the first
time any data is sent to the device.
In short, I had a bad time after connecting the sensor and trying to get
it to work. I hope blacklisting it in the cdc-acm driver will save
someone else a bit of trouble.
Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Human Presence Detection (HPD) sensors support
on AMD next generation HPD supported platforms.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extend ALS support for AMD next generation SoC's like Renoir, Cezanne.
AMD next generation platforms use C2P message register to read ALS
sensor data instead of DRAM address.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Initial driver support only covered the first generation of SFH
platforms. In order to support the future generations introduce
ops selection to distinguish the different platforms.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Smatch static checker warns that "mdev" can be null:
sound/usb/media.c:287 snd_media_device_create()
warn: 'mdev' can also be NULL
If CONFIG_MEDIA_CONTROLLER is disabled, this file should not be included
in the build.
The below conditions in the sound/usb/Makefile are in place to ensure that
media.c isn't included in the build.
sound/usb/Makefile:
snd-usb-audio-$(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER) += media.o
select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER &&
(MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO)
The following config check in include/media/media-dev-allocator.h is
in place to enable the API only when CONFIG_MEDIA_CONTROLLER and
CONFIG_USB are enabled.
#if defined(CONFIG_MEDIA_CONTROLLER) && defined(CONFIG_USB)
This check doesn't work as intended when CONFIG_USB=m. When CONFIG_USB=m,
CONFIG_USB_MODULE is defined and CONFIG_USB is not. The above config check
doesn't catch that CONFIG_USB is defined as a module and disables the API.
This results in sound/usb enabling Media Controller specific ALSA driver
code, while Media disables the Media Controller API.
Fix the problem requires two changes:
1. Change the check to use IS_ENABLED to detect when CONFIG_USB is enabled
as a module or static. Since CONFIG_MEDIA_CONTROLLER is a bool, leave
the check unchanged to be consistent with drivers/media/Makefile.
2. Change the drivers/media/mc/Makefile to include mc-dev-allocator.o
in mc-objs when CONFIG_USB is enabled.
Link: https://lore.kernel.org/alsa-devel/YLeAvT+R22FQ%2FEyw@mwanda/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The bit field rsvd1 in resp is not being initialized and garbage data is
being copied from the stack back to userspace via the ib_copy_to_udata
call. Fix this by setting the entire struct resp to zero; this will ensure
that further new bit fields in the future will be zero'd too.
Link: https://lore.kernel.org/r/20210623182437.163801-1-colin.king@canonical.com
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 879740517d ("RDMA/bnxt_re: Update ABI to pass wqe-mode to user space")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
[jgg: remove extra zeroing]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Relax frame record alignment requirements to facilitate 8-byte alignment
with KASAN and Clang.
* for-next/stacktrace:
arm64: stacktrace: Relax frame record alignment requirement to 8 bytes
arm64: Change the on_*stack functions to take a size argument
arm64: Implement stack trace termination record
This patch is used to relax bandwidth schedule by allowing multiple
Start-Split in the same microframe.
Reviewed-and-Tested-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1623995165-25759-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The continue statement at the end of the while-loop is redundant,
remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Continue has no effect")
Link: https://lore.kernel.org/r/20210621095545.9659-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "rv" is initialized to "-ENOMEM", because "rv" is re-assigned to
"-EINVAL", when kmalloc & usb_alloc_urb failed, the return value should
return "-ENOMEM" rather than "-EINVAL",so the "rv" assignment is placed
in the position where usb_endpoint_is_int_in is false.
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210621132415.2341-1-angkery@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the Linux iser initiator default max I/O size set to 512KB and since
there is no handshake procedure for this size in iser protocol, set the
default max IO size of the target to 512KB as well.
For changing the default values, there is a module parameter for both
drivers.
Link: https://lore.kernel.org/r/20210524085215.29005-1-mgurtovoy@nvidia.com
Reviewed-by: Alaa Hleihel <alaa@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Removing unused cnt increase from EMIT macro together with cnt declarations.
This was introduced in commit [1] to ensure proper code generation. But that
code was removed in commit [2] and this extra code was left in.
[1] b52f00e6a7 ("x86: bpf_jit: implement bpf_tail_call() helper")
[2] ebf7d1f508 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210623112504.709856-1-jolsa@kernel.org
Since commit 6c5f05a6cd ("ARM: imx3: Remove imx3 soc_init()")
there are no more users of struct sdma_script_start_addrs outside
of the driver itself, thus let's move the struct declaration just
to the driver source code and remove the header file as unused one.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210620191103.156626-1-vz@mleia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Here are the USB-serial updates for 5.14-rc1, including:
- gpio support for CP2108
- chars_in_buffer and write_room return-value updates
- chars_in_buffer and write_room clean ups
Included are also various clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYNRHtQAKCRALxc3C7H1l
CD96AQDYFm0ssrdV61bejQLX+9LrIfNuISXNJy9cLhCxi3ZYJwD/ZLJhz0K/Xby1
+Xm4J5UVbPuIKMkNKMc0ezH0XZfURwU=
=61V6
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.14-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.14-rc1
Here are the USB-serial updates for 5.14-rc1, including:
- gpio support for CP2108
- chars_in_buffer and write_room return-value updates
- chars_in_buffer and write_room clean ups
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.14-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: add support for GPIOs on CP2108
USB: serial: drop irq-flags initialisations
USB: serial: mos7840: drop buffer-callback return-value comments
USB: serial: mos7720: drop buffer-callback sanity checks
USB: serial: io_edgeport: drop buffer-callback sanity checks
USB: serial: digi_acceleport: add chars_in_buffer locking
USB: serial: digi_acceleport: reduce chars_in_buffer over-reporting
USB: serial: make usb_serial_driver::chars_in_buffer return uint
USB: serial: make usb_serial_driver::write_room return uint
In order to avoid a race condition for user events when changing
cpu affinity reset the active flag only when EOI-ing the event.
This is working fine as all user events are lateeoi events. Note that
lateeoi_ack_mask_dynirq() is not modified as there is no explicit call
to xen_irq_lateeoi() expected later.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Fixes: b6622798bc ("xen/events: avoid handling the same event on two cpus at the same time")
Tested-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com>
Link: https://lore.kernel.org/r/20210623130913.9405-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
I haven't touched these drivers in seven years, and none of the
patches sent to me these days affect code that I wrote. The
other maintainers are doing a very good job without me.
Signed-off-by: Timur Tabi <timur@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210620160135.28651-1-timur@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 50b1ce617d)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One of the fixes reverted as part of the UMN fallout was actually fine,
however rather than undoing the revert the process that handled all this
stuff resulted in a patch which attempted to add extra error checks
instead. Unfortunately this new change wasn't really based on a good
understanding of the subsystem APIs and bypassed the usual patch flow
without ensuring it was reviewed by people with subsystem knowledge and
was merged as a fix rather than during the merge window.
The effect of the new fix is to upgrade what were previously warnings on
static data in the code to hard errors on that data. If this actually
happens then it would break existing systems, if it doesn't happen then
the change has no effect so this was not a safe change to apply as a fix
to the release candidates. Since the new code has not been tested and
doesn't in practice improve error handling revert it instead, and also
drop the original revert since the original fix was fine. This takes
the driver back to what it was in -rc1.
Fixes: 5e70b8e22b ("ASoC: rt5645: add error checking to rt5645_probe function")
Fixes: 1e0ce84215 ("Revert "ASoC: rt5645: fix a NULL pointer dereference")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 916cccb507)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current implementation of time64_to_tm() contains unnecessary loops,
branches and look-up tables. The new one uses an arithmetic-based algorithm
appeared in [1] and is approximately 3x faster (YMMV).
The drawback is that the new code isn't intuitive and contains many 'magic
numbers' (not unusual for this type of algorithm). However, [1] justifies
all those numbers and, given this function's history, the code is unlikely
to need much maintenance, if any at all.
Add a KUnit test for it which checks every day in a 160,000 years interval
centered at 1970-01-01 against the expected result.
[1] Neri, Schneider, "Euclidean Affine Functions and Applications to
Calendar Algorithms". https://arxiv.org/abs/2102.06959
Signed-off-by: Cassio Neri <cassio.neri@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210622213616.313046-1-cassio.neri@gmail.com
Tacoma and Rainier both have a line-names array that is too long:
gpio gpiochip0: gpio-line-names is length 232 but should be at most length 208
This was probably copied from an AST2500 device tree that did have more
GPIOs on the controller.
Fixes: e9b24b55ca ("ARM: dts: aspeed: rainier: Add gpio line names")
Fixes: 2f68e4e7df ("ARM: dts: aspeed: tacoma: Add gpio line names")
Link: https://lore.kernel.org/r/20210624090742.56640-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Use KVM_UTIL_MIN_ADDR as the minimum for x86-64's CPUID array. The
system page size was likely used as the minimum because _something_ had
to be provided. Increasing the min from 0x1000 to 0x2000 should have no
meaningful impact on the test, and will allow changing vm_vaddr_alloc()
to use KVM_UTIL_MIN_VADDR as the default.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the common page allocation helper for the xAPIC IPI test, effectively
raising the minimum virtual address from 0x1000 to 0x2000. Presumably
the test won't explode if it can't get a page at address 0x1000...
Cc: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to the vm_vaddr_alloc_page() helper for x86-64's "kernel"
allocations now that the helper uses the same min virtual address as the
open coded versions.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reduce the minimum virtual address of page allocations from 0x10000 to
KVM_UTIL_MIN_VADDR (0x2000). Both values appear to be completely
arbitrary, and reducing the min to KVM_UTIL_MIN_VADDR will allow for
additional consolidation of code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers to allocate 1 and N pages of memory using de facto standard
values as the defaults for minimum virtual address, data memslot, and
page table memslot. Convert all compatible users.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622200529.3650424-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
