Commit graph

131,169 commits

Author SHA1 Message Date
Christian Hewitt
2a14dfaffe media: rc: add keymap for KHAMSIN remote
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-Top Box
used by O2.cz. This keymap adds support for the default IR controls.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-26 14:28:10 +01:00
Pierre-Louis Bossart
fb5103f9d6
regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ
The SoundWire 1.1 specification only allowed for reads and writes of
bytes. The SoundWire 1.2 specification adds a new capability to
transfer "Multi-Byte Quantities" (MBQ) across the bus. The transfers
still happens one-byte-at-a-time, but the update is atomic.

For example when writing a 16-bit volume, the first byte transferred
is only taken into account when the second byte is successfully
transferred.

The mechanism is symmetrical for read and writes:
- On a read, the address of the last byte to be read is modified by
setting the MBQ bit
- On a write, the address of all but the last byte to be written are
modified by setting the MBQ bit. The address for the last byte relies
on the MBQ bit being cleared.

The current definitions for MBQ-based controls in the SDCA draft
standard are limited to 16 bits for volumes, so for now this is the
only supported format. An update will be provided if and when support
for 24-bit and 32-bit values is specified by the SDCA standard.

One possible objection is that this code could have been handled with
regmap-sdw.c. However this is a new spec addition not handled by every
SoundWire 1.1 and non-SDCA device, so there's no reason to load code
that will never be used.

Also in practice it's extremely unlikely that CONFIG_REGMAP would not
be selected with CONFIG_REGMAP_MBQ selected. However there's no
functional dependency between the two modules so they can be selected
separately.

Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201103172226.4278-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-26 13:19:59 +00:00
Pierre-Louis Bossart
07e21d4d96
soundwire: SDCA: add helper macro to access controls
The upcoming SDCA (SoundWire Device Class Audio) specification defines
a hierarchical encoding to interface with Class-defined capabilities.

The specification is not yet accessible to the general public but this
information is released with explicit permission from the MIPI Board
to avoid delays with SDCA support on Linux platforms.

A block of 64 MBytes of register addresses are allocated to SDCA
controls, starting at address 0x40000000. The 26 LSBs which identify
individual controls are set based on the following variables:

- Function Number. An SCDA device can be split in up to 8 independent
  Functions. Each of these Functions is described in the SDCA
  specification, e.g. Smart Amplifier, Smart Microphone, Simple
  Microphone, Jack codec, HID, etc.

- Entity Number.  Within each Function,  an Entity is  an identifiable
  block.  Up   to  127  Entities   are  connected  in   a  pre-defined
  graph  (similar to  USB), with  Entity0 reserved  for Function-level
  configurations.  In  contrast  to  USB, the  SDCA  spec  pre-defines
  Function Types, topologies, and allowed  options, i.e. the degree of
  freedom  is not  unlimited to  limit  the possibility  of errors  in
  descriptors leading to software quirks.

- Control Selector. Within each Entity, the SDCA specification defines
  48 controls such as Mute, Gain, AGC, etc, and 16 implementation
  defined ones. Some Control Selectors might be used for low-level
  platform setup, and other exposed to applications and users. Note
  that the same Control Selector capability, e.g. Latency control,
  might be located at different offsets in different entities, the
  Control Selector mapping is Entity-specific.

- Control Number. Some Control Selectors allow channel-specific values
  to be set, with up to 64 channels allowed. This is mostly used for
  volume control.

- Current/Next values. Some Control Selectors are
  'Dual-Ranked'. Software may either update the Current value directly
  for immediate effect. Alternatively, software may write into the
  'Next' values and update the SoundWire 1.2 'Commit Groups' register
  to copy 'Next' values into 'Current' ones in a synchronized
  manner. This is different from bank switching which is typically
  used to change the bus configuration only.

- MBQ. the Multi-Byte Quantity bit is used to provide atomic updates
  when accessing more that one byte, for example a 16-bit volume
  control would be updated consistently, the intermediate values
  mixing old MSB with new LSB are not applied.

These 6 parameters are used to build a 32-bit address to access the
desired Controls. Because of address range, paging is required, but
the most often used parameter values are placed in the lower 16 bits
of the address. This helps to keep the paging registers constant while
updating Controls for a specific Device/Function.

Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201103172226.4278-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-26 13:19:58 +00:00
Mauro Carvalho Chehab
4fe21dec6c media: rc: improve LIRC documentation
Add documentation for enum rc_proto and struct lirc_scancode
at the generated docs.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
2020-11-26 14:19:10 +01:00
Kuninori Morimoto
cd7c7d10e8
ASoC: soc-component: add mark for snd_soc_link_compr_startup/shutdown()
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().

	static int soc_compr_open(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return 0;

 ^	machine_err:
 |		...
 |	out:
(A)		...
 |	pm_err:
 |		...
 v		return ret;
	}

The difference is
soc_compr_free()  is for all dai/component/substream,
rollback          is for succeeded part only.

This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
	1) snd_soc_dai_compr_startup/shutdown()
	2) snd_soc_component_compr_open/free()
=>	3) snd_soc_link_compr_startup/shutdown()

This patch is for 3) snd_soc_link_compr_startup/shutdown()
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.

It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0ui5iwf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-26 13:09:36 +00:00
Kuninori Morimoto
f94ba9ac20
ASoC: soc-component: add mark for snd_soc_component_compr_open/free()
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().

	static int soc_compr_open(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return 0;

 ^	machine_err:
 |		...
 |	out:
(A)		...
 |	pm_err:
 |		...
 v		return ret;
	}

The difference is
soc_compr_free()  is for all dai/component/substream,
rollback          is for succeeded part only.

This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
	1) snd_soc_dai_compr_startup/shutdown()
=>	2) snd_soc_component_compr_open/free()
	3) snd_soc_link_compr_startup/shutdown()

This patch is for 2) snd_soc_component_compr_open/free(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.

It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfey5iwk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-26 13:09:35 +00:00
Kuninori Morimoto
1e6a93cf74
ASoC: soc-dai: add mark for snd_soc_dai_compr_startup/shutdown()
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().

	static int soc_compr_open(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return 0;

 ^	machine_err:
 |		...
 |	out:
(A)		...
 |	pm_err:
 |		...
 v		return ret;
	}

The difference is
soc_compr_free()  is for all dai/component/substream,
rollback          is for succeeded part only.

This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
=>	1) snd_soc_dai_compr_startup/shutdown()
	2) snd_soc_component_compr_open/free()
	3) snd_soc_link_compr_startup/shutdown()

This patch is for 1) snd_soc_dai_compr_startup/shutdown(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.

It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtze5iwp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-26 13:09:34 +00:00
Badhri Jagan Sridharan
11e5e568ce usb: typec: tcpm: Stay in SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS till Rp is seen
TD.4.7.3. Try SNK DRP Connect Try.SRC DRP fails. The compliance
tester mimics being a Try.SRC USB-C port.
The failure is due to TCPM exiting SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS
when VBUS is not present eventhough when SNK.Rp is seen. Exit to
SRC_TRYWAIT from SNK_TRY_WAIT_DEBOUNCE_CHECK_VBUS only when SNK.Rp
is not seen for PD_T_TRY_CC_DEBOUNCE.

>From the spec:
The port shall then transition to Attached.SNK when the SNK.Rp state
is detected on exactly one of the CC1 or CC2 pins for at least
tTryCCDebounce and VBUS is detected. Alternatively, the port shall
transition to TryWait.SRC if SNK.Rp state is not detected for
tTryCCDebounce.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20201125014804.1596719-1-badhri@google.com
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26 13:40:38 +01:00
Peter Zijlstra
20c7775aec Merge remote-tracking branch 'origin/master' into perf/core
Further perf/core patches will depend on:

  d3f7b1bb20 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Linus' tree.
2020-11-26 13:16:55 +01:00
Oleg Nesterov
640586f8af powerpc/ptrace: Simplify gpr_get()/tm_cgpr_get()
gpr_get() does membuf_write() twice to override pt_regs->msr in
between. We can call membuf_write() once and change ->msr in the
kernel buffer, this simplifies the code and the next fix.

The patch adds a new simple helper, membuf_at(offs), it returns the
new membuf which can be safely used after membuf_write().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[mpe: Fixup some minor whitespace issues noticed by Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201119160221.GA5188@redhat.com
2020-11-26 22:05:42 +11:00
Heikki Krogerus
7656ca71b0 usb: pd: DFP product types
USB Power Delivery Specification R3.0 introduced separate
field for the DFP product type to the ID Header VDO.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201125120642.37156-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26 09:18:56 +01:00
Suman Anna
4c1ad562d3 remoteproc: Add a rproc_set_firmware() API
A new API, rproc_set_firmware() is added to allow the remoteproc platform
drivers and remoteproc client drivers to be able to configure a custom
firmware name that is different from the default name used during
remoteproc registration. This function is being introduced to provide
a kernel-level equivalent of the current sysfs interface to remoteproc
client drivers, and can only change firmwares when the remoteproc is
offline. This allows some remoteproc drivers to choose different firmwares
at runtime based on the functionality the remote processor is providing.
The TI PRU Ethernet driver will be an example of such usage as it
requires to use different firmwares for different supported protocols.

Also, update the firmware_store() function used by the sysfs interface
to reuse this function to avoid code duplication.

Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20201121032042.6195-1-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25 23:05:24 -06:00
Maxim Mikityanskiy
025cc2fb6a net/tls: Protect from calling tls_dev_del for TLS RX twice
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after
calling tls_dev_del if TLX TX offload is also enabled. Clearing
tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a
time frame when tls_device_down may get called and call tls_dev_del for
RX one extra time, confusing the driver, which may lead to a crash.

This patch corrects this racy behavior by adding a flag to prevent
tls_device_down from calling tls_dev_del the second time.

Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25 17:31:06 -08:00
Yunsheng Lin
8b5536ad12 lockdep: Introduce in_softirq lockdep assert
The current semantic for napi_consume_skb() is that caller need
to provide non-zero budget when calling from NAPI context, and
breaking this semantic will cause hard to debug problem, because
_kfree_skb_defer() need to run in atomic context in order to push
the skb to the particular cpu' napi_alloc_cache atomically.

So add the lockdep_assert_in_softirq() to assert when the running
context is not in_softirq, in_softirq means softirq is serving or
BH is disabled, which has a ambiguous semantics due to the BH
disabled confusion, so add a comment to emphasize that.

And the softirq context can be interrupted by hard IRQ or NMI
context, lockdep_assert_in_softirq() need to assert about hard
IRQ or NMI context too.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25 15:08:34 -08:00
KP Singh
27672f0d28 bpf: Add a BPF helper for getting the IMA hash of an inode
Provide a wrapper function to get the IMA hash of an inode. This helper
is useful in fingerprinting files (e.g executables on execution) and
using these fingerprints in detections like an executable unlinking
itself.

Since the ima_inode_hash can sleep, it's only allowed for sleepable
LSM hooks.

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-3-kpsingh@chromium.org
2020-11-26 00:04:04 +01:00
KP Singh
403319be5d ima: Implement ima_inode_hash
This is in preparation to add a helper for BPF LSM programs to use
IMA hashes when attached to LSM hooks. There are LSM hooks like
inode_unlink which do not have a struct file * argument and cannot
use the existing ima_file_hash API.

An inode based API is, therefore, useful in LSM based detections like an
executable trying to delete itself which rely on the inode_unlink LSM
hook.

Moreover, the ima_file_hash function does nothing with the struct file
pointer apart from calling file_inode on it and converting it to an
inode.

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-2-kpsingh@chromium.org
2020-11-26 00:04:04 +01:00
Horatiu Vultur
bfd042321a bridge: mrp: Implement LC mode for MRP
Extend MRP to support LC mode(link check) for the interconnect port.
This applies only to the interconnect ring.

Opposite to RC mode(ring check) the LC mode is using CFM frames to
detect when the link goes up or down and based on that the userspace
will need to react.
One advantage of the LC mode over RC mode is that there will be fewer
frames in the normal rings. Because RC mode generates InTest on all
ports while LC mode sends CFM frame only on the interconnect port.

All 4 nodes part of the interconnect ring needs to have the same mode.
And it is not possible to have running LC and RC mode at the same time
on a node.

Whenever the MIM starts it needs to detect the status of the other 3
nodes in the interconnect ring so it would send a frame called
InLinkStatus, on which the clients needs to reply with their link
status.

This patch adds InLinkStatus frame type and extends existing rules on
how to forward this frame.

Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20201124082525.273820-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25 13:33:35 -08:00
Vlad Buslov
f460019b4c net: sched: alias action flags with TCA_ACT_ prefix
Currently both filter and action flags use same "TCA_" prefix which makes
them hard to distinguish to code and confusing for users. Create aliases
for existing action flags constants with "TCA_ACT_" prefix.

Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Link: https://lore.kernel.org/r/20201124164054.893168-1-vlad@buslov.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25 12:34:44 -08:00
Ioana Ciornei
6527b93842 net: phy: remove the .did_interrupt() and .ack_interrupt() callback
Now that all the PHY drivers have been migrated to directly implement
the generic .handle_interrupt() callback for a seamless support of
shared IRQs and all the .config_inter() implementations clear any
pending interrupts, we can safely remove the two callbacks.

With this patch, phylib has a proper support for shared IRQs (and not
just for multi-PHY devices. A PHY driver must implement both the
.handle_interrupt() and .config_intr() callbacks for the IRQs to be
actually used.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25 11:18:38 -08:00
Jeffle Xu
63653368c2 block: remove unused BIO_SPLIT_ENTRIES
Since commit 4b1faf9316 ("block: Kill bio_pair_split()"), there's
no user of BIO_SPLIT_ENTRIES anymore.

Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-25 11:11:32 -07:00
Sumit Garg
367c820ef0 arm64: Enable perf events based hard lockup detector
With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.

One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25 15:18:39 +00:00
Johan Hovold
2aec389e19 params: clean up module-param macros
Clean up the module-param macros by adding some indentation and using
the __aligned() macro to improve readability.

Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-11-25 15:45:11 +01:00
Johan Hovold
fe2f4fe139 params: use type alignment for kernel parameters
Specify type alignment for kernel parameters instead of sizeof(void *).

The alignment attribute is used to prevent gcc from increasing the
alignment of objects with static extent as an optimisation, something
which would mess up the __param array stride.

Using __alignof__(struct kernel_param) rather than sizeof(void *) is
preferred since it better indicates why it is there and doesn't break
should the type size or alignment change.

Note that on m68k the alignment of struct kernel_param is actually two
and that adding a 1- or 2-byte field to the 20-byte struct would cause a
breakage with the current 4-byte alignment.

Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-11-25 15:45:03 +01:00
Johan Hovold
8d6615f1fc params: drop redundant "unused" attributes
Drop the redundant "unused" attributes from module-parameter structures
already marked "used".

Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-11-25 15:44:56 +01:00
Johan Hovold
b112082c89 module: simplify version-attribute handling
Instead of using the array-of-pointers trick to avoid having gcc mess up
the built-in module-version array stride, specify type alignment when
declaring entries to prevent gcc from increasing alignment.

This is essentially an alternative (one-line) fix to the problem
addressed by commit b4bc842802 ("module: deal with alignment issues in
built-in module versions").

gcc can increase the alignment of larger objects with static extent as
an optimisation, but this can be suppressed by using the aligned
attribute when declaring variables.

Note that we have been relying on this behaviour for kernel parameters
for 16 years and it indeed hasn't changed since the introduction of the
aligned attribute in gcc-3.1.

Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-11-25 15:44:46 +01:00
Johan Hovold
0801a0073f module: drop version-attribute alignment
Commit 98562ad8cb ("module: explicitly align module_version_attribute
structure") added an alignment attribute to the struct
module_version_attribute type in order to fix an alignment issue on m68k
where the structure is 2-byte aligned while MODULE_VERSION() forced the
__modver section entries to be 4-byte aligned (sizeof(void *)).

This was essentially an alternative fix to the problem addressed by
b4bc842802 ("module: deal with alignment issues in built-in module
versions") which used the array-of-pointer trick to prevent gcc from
increasing alignment of the version attribute entries. And with the
pointer indirection in place there's no need to increase the alignment
of the type.

Link: https://lore.kernel.org/lkml/20201103175711.10731-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2020-11-25 15:44:36 +01:00
Sean Young
cea357bc25 media: lirc: ensure RC_PROTO_MAX has documentation
The enum rc_proto value RC_PROTO_MAX has no documentation, this is causing
a warning while building the documentation.

Fixes: 72e637fec5 ("media: rc: validate that "rc_proto" is reasonable")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25 14:52:04 +01:00
Sai Prakash Ranjan
e67890c979 iommu/io-pgtable-arm: Add support to use system cache
Add a quirk IO_PGTABLE_QUIRK_ARM_OUTER_WBWA to override
the outer-cacheability attributes set in the TCR for a
non-coherent page table walker when using system cache.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/f818676b4a2a9ad1edb92721947d47db41ed6a7c.1606287059.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25 12:39:09 +00:00
Sai Prakash Ranjan
a7656ecf82 iommu/io-pgtable: Add a domain attribute for pagetable configuration
Add a new iommu domain attribute DOMAIN_ATTR_IO_PGTABLE_CFG
for pagetable configuration which initially will be used to
set quirks like for system cache aka last level cache to be
used by client drivers like GPU to set right attributes for
caching the hardware pagetables into the system cache and
later can be extended to include other page table configuration
data.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/9190aa16f378fc0a7f8e57b2b9f60b033e7eeb4f.1606287059.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25 12:39:09 +00:00
Tom Murphy
230309d08b iommu: Add iommu_dma_free_cpu_cached_iovas()
Add a iommu_dma_free_cpu_cached_iovas function to allow drivers which
use the dma-iommu ops to free cached cpu iovas.

Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25 12:03:48 +00:00
Tom Murphy
2a2b8eaa5b iommu: Handle freelists when using deferred flushing in iommu drivers
Allow the iommu_unmap_fast to return newly freed page table pages and
pass the freelist to queue_iova in the dma-iommu ops path.

This is useful for iommu drivers (in this case the intel iommu driver)
which need to wait for the ioTLB to be flushed before newly
free/unmapped page table pages can be freed. This way we can still batch
ioTLB free operations and handle the freelists.

Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-11-25 12:03:48 +00:00
Hui Su
fdeb17c70c trace: fix potenial dangerous pointer
The bdi_dev_name() returns a char [64], and
the __entry->name is a char [32].

It maybe dangerous to TP_printk("%s", __entry->name)
after the strncpy().

CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201124165205.GA23937@rlk
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2020-11-25 13:03:44 +01:00
Karol Trzcinski
5b10b62989
ASoC: SOF: Add memory_info file to debugfs
This file content describes memory allocation status
at run-time, typically to detect memory leaks.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-25 11:07:17 +00:00
Karol Trzcinski
6dd958955d
ASoC: SOF: Change section comment for SOF_IPC_TEST_
Section comment should be coherent with IPC prefix from define
names.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-25 11:07:16 +00:00
Karol Trzcinski
2e4f3f9141
ASoC: SOF: Improve code alignment in header.h
Each define value in series should be aligned and tabs should
be used instead of spaces to follow code-style.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-25 11:07:15 +00:00
Karol Trzcinski
7f09f79d5c
ASoC: SOF: ext_manifest: Parse firmware config dictionary
Values given in this dictionary describes used firmware configuration,
like feature availability, buffer size limits and similar properties.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-25 11:07:14 +00:00
Pierre-Louis Bossart
2fb9478495 soundwire: registers: add definitions for clearable interrupt fields
DP0 has reserved fields and the read-only SDCA_CASCADE bit. We should
not try to write values in these fields, so add a formal definition
for clearable interrupts to be used in DP0 interrupt handling.

DPN also has reserved fields so add definitions for clearable
interrupts as well.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201124013318.8963-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-25 10:32:25 +05:30
Thara Gopinath
8d5d3c7a5b dt-bindings: clock: Add entry for crypto engine RPMH clock resource
Add clock id forc CE clock resource which is required to bring up the
crypto engine on sdm845.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20201119155233.3974286-2-thara.gopinath@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-11-24 18:05:11 -08:00
Gabriel Krisman Bertazi
5903f61e03 entry: Fix boot for !CONFIG_GENERIC_ENTRY
A copy-pasta mistake tries to set SYSCALL_WORK flags instead of TIF
flags for !CONFIG_GENERIC_ENTRY.  Also, add safeguards to catch this at
compilation time.

Fixes: 3136b93c3f ("entry: Expose helpers to migrate TIF to SYSCALL_WORK flags")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87a6v8qd9p.fsf_-_@collabora.com
2020-11-25 02:20:09 +01:00
Eric Biggers
234f1b7f8d fscrypt: remove unnecessary calls to fscrypt_require_key()
In an encrypted directory, a regular dentry (one that doesn't have the
no-key name flag) can only be created if the directory's encryption key
is available.

Therefore the calls to fscrypt_require_key() in __fscrypt_prepare_link()
and __fscrypt_prepare_rename() are unnecessary, as these functions
already check that the dentries they're given aren't no-key names.

Remove these unnecessary calls to fscrypt_require_key().

Link: https://lore.kernel.org/r/20201118075609.120337-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-24 15:10:27 -08:00
Eric Biggers
159e1de201 fscrypt: add fscrypt_is_nokey_name()
It's possible to create a duplicate filename in an encrypted directory
by creating a file concurrently with adding the encryption key.

Specifically, sys_open(O_CREAT) (or sys_mkdir(), sys_mknod(), or
sys_symlink()) can lookup the target filename while the directory's
encryption key hasn't been added yet, resulting in a negative no-key
dentry.  The VFS then calls ->create() (or ->mkdir(), ->mknod(), or
->symlink()) because the dentry is negative.  Normally, ->create() would
return -ENOKEY due to the directory's key being unavailable.  However,
if the key was added between the dentry lookup and ->create(), then the
filesystem will go ahead and try to create the file.

If the target filename happens to already exist as a normal name (not a
no-key name), a duplicate filename may be added to the directory.

In order to fix this, we need to fix the filesystems to prevent
->create(), ->mkdir(), ->mknod(), and ->symlink() on no-key names.
(->rename() and ->link() need it too, but those are already handled
correctly by fscrypt_prepare_rename() and fscrypt_prepare_link().)

In preparation for this, add a helper function fscrypt_is_nokey_name()
that filesystems can use to do this check.  Use this helper function for
the existing checks that fs/crypto/ does for rename and link.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201118075609.120337-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-24 15:10:27 -08:00
Björn Töpel
36ccdf8582 net, xsk: Avoid taking multiple skbuff references
Commit 642e450b6b ("xsk: Do not discard packet when NETDEV_TX_BUSY")
addressed the problem that packets were discarded from the Tx AF_XDP
ring, when the driver returned NETDEV_TX_BUSY. Part of the fix was
bumping the skbuff reference count, so that the buffer would not be
freed by dev_direct_xmit(). A reference count larger than one means
that the skbuff is "shared", which is not the case.

If the "shared" skbuff is sent to the generic XDP receive path,
netif_receive_generic_xdp(), and pskb_expand_head() is entered the
BUG_ON(skb_shared(skb)) will trigger.

This patch adds a variant to dev_direct_xmit(), __dev_direct_xmit(),
where a user can select the skbuff free policy. This allows AF_XDP to
avoid bumping the reference count, but still keep the NETDEV_TX_BUSY
behavior.

Fixes: 642e450b6b ("xsk: Do not discard packet when NETDEV_TX_BUSY")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201123175600.146255-1-bjorn.topel@gmail.com
2020-11-24 22:39:56 +01:00
Moshe Shemesh
5204bb683c devlink: Fix reload stats structure
Fix reload stats structure exposed to the user. Change stats structure
hierarchy to have the reload action as a parent of the stat entry and
then stat entry includes value per limit. This will also help to avoid
string concatenation on iproute2 output.

Reload stats structure before this fix:
"stats": {
    "reload": {
        "driver_reinit": 2,
        "fw_activate": 1,
        "fw_activate_no_reset": 0
     }
}

After this fix:
"stats": {
    "reload": {
        "driver_reinit": {
            "unspecified": 2
        },
        "fw_activate": {
            "unspecified": 1,
            "no_reset": 0
        }
}

Fixes: a254c26426 ("devlink: Add reload stats")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1606109785-25197-1-git-send-email-moshe@mellanox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24 13:04:04 -08:00
Ido Schimmel
f0a5013e29 devlink: Add blackhole_nexthop trap
Add a packet trap to report packets that were dropped due to a
blackhole nexthop.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24 12:14:56 -08:00
Jakub Kicinski
23c01ed3b0 rxrpc development
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl+8E4YACgkQ+7dXa6fL
 C2tehQ/8C1O+p1UBmQ4k/eXkYqsIvRQJGXGheSClxvym8tQiut/sZEKsCqucFmO8
 Y2gKEYJB3xYIqbZjjJUFYbL70Q5qG/cXgKn3rCpMjhn/0UAoUSwaGyoURcLwaz2B
 asipDSvbvZk7OwX4ScUTi/b/7AHtO6l16Y6yRzUqneOsSkXYk1+HhK2/4rPDKEJf
 cxocGIjjWs4d1erG2Aqgn3BZ2GsDNb88NJYi5qgc0ywFgRacX7oL0WFeu6pD1Ja+
 8vZLjFYB/bDeLBlvzpnWal99lUiSee8BbUoQn1iGJ3EekUVWkkNNfjhpYRjzIIR5
 GsJfbDHP16PHhLZgxBvNBwkWoqqBw3X/Zn0dkBDZgjlZQvLbeds6QRd6Ag/M2CJI
 D1QtmBDBtr4UZfRFm+5hfpTqf2jeOc4o68WROH3FEdsnKvICkttKucE9LaykokFD
 gQLNmkn2tb1D1yS2Y4iPucV3kYUU1Y6yw++Ck0cE2isBauN0gHtr9UAXZEc57ILc
 hXCFrJTbGkph3TimQDd1QbXZ28eExRBnn+H5RyYHeEidv03d2UO5uFZaJ5b5UGX0
 sE+3aeWLTH3fFTBvMnYPyFjzalSky8V5zOlUltwVCx7PpiDe6P7rKpO+ZXEi4OXP
 mHz7HM6h1iEnnrqEGNz7L39pTqKVbfBxDMvFra07dyKkvVthF1w=
 =TvbK
 -----END PGP SIGNATURE-----

Merge tag 'rxrpc-next-20201123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Prelude to gssapi support

Here are some patches that do some reorganisation of the security class
handling in rxrpc to allow implementation of the RxGK security class that
will allow AF_RXRPC to use GSSAPI-negotiated tokens and better crypto.  The
RxGK security class is not included in this patchset.

It does the following things:

 (1) Add a keyrings patch to provide the original key description, as
     provided to add_key(), to the payload preparser so that it can
     interpret the content on that basis.  Unfortunately, the rxrpc_s key
     type wasn't written to interpret its payload as anything other than a
     string of bytes comprising a key, but for RxGK, more information is
     required as multiple Kerberos enctypes are supported.

 (2) Remove the rxk5 security class key parsing.  The rxk5 class never got
     rolled out in OpenAFS and got replaced with rxgk.

 (3) Support the creation of rxrpc keys with multiple tokens of different
     types.  If some types are not supported, the ENOPKG error is
     suppressed if at least one other token's type is supported.

 (4) Punt the handling of server keys (rxrpc_s type) to the appropriate
     security class.

 (5) Organise the security bits in the rxrpc_connection struct into a
     union to make it easier to override for other classes.

 (6) Move some bits from core code into rxkad that won't be appropriate to
     rxgk.

* tag 'rxrpc-next-20201123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  rxrpc: Ask the security class how much space to allow in a packet
  rxrpc: rxkad: Don't use pskb_pull() to advance through the response packet
  rxrpc: Organise connection security to use a union
  rxrpc: Don't reserve security header in Tx DATA skbuff
  rxrpc: Merge prime_packet_security into init_connection_security
  rxrpc: Fix example key name in a comment
  rxrpc: Ignore unknown tokens in key payload unless no known tokens
  rxrpc: Make the parsing of xdr payloads more coherent
  rxrpc: Allow security classes to give more info on server keys
  rxrpc: Don't leak the service-side session key to userspace
  rxrpc: Hand server key parsing off to the security class
  rxrpc: Split the server key type (rxrpc_s) into its own file
  rxrpc: Don't retain the server key in the connection
  rxrpc: Support keys with multiple authentication tokens
  rxrpc: List the held token types in the key description in /proc/keys
  rxrpc: Remove the rxk5 security class as it's now defunct
  keys: Provide the original description to the key preparser
====================

Link: https://lore.kernel.org/r/160616220405.830164.2239716599743995145.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24 12:05:58 -08:00
Vinod Koul
5d0c3533a1 dmaengine: qcom: Add GPI dma driver
This controller provides DMAengine capabilities for a variety of peripheral
buses such as I2C, UART, and SPI. By using GPI dmaengine driver, bus
drivers can use a standardize interface that is protocol independent to
transfer data between memory and peripheral.

Link: https://lore.kernel.org/r/20201109085450.24843-4-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-24 21:42:07 +05:30
Vinod Koul
e7bbb7acab dmaengine: add peripheral configuration
Some complex dmaengine controllers have capability to program the
peripheral device, so pass on the peripheral configuration as part of
dma_slave_config

Link: https://lore.kernel.org/r/20201109085450.24843-3-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-24 21:42:04 +05:30
Arnaud Pouliquen
950a7388f0 rpmsg: Turn name service into a stand alone driver
Make the RPMSG name service announcement a stand alone driver so that it
can be reused by other subsystems.  It is also the first step in making the
functionatlity transport independent, i.e that is not tied to virtIO.

Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Co-developed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Co-developed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20201120214245.172963-9-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24 10:11:59 -06:00
Vinod Koul
678198f211 dt-bindings: dmaengine: Document qcom,gpi dma binding
Add devicetree binding documentation for GPI DMA controller
implemented on Qualcomm SoCs

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201109085450.24843-2-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-24 21:41:59 +05:30
Mathieu Poirier
55488110ac rpmsg: Make rpmsg_{register|unregister}_device() public
Make function rpmsg_register_device() and rpmsg_unregister_device()
functions public so that they can be used by other clients.  While
doing so get rid of two obsolete function, i.e register_rpmsg_device()
and unregister_rpmsg_device(), to prevent confusion.

Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201120214245.172963-8-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24 10:11:52 -06:00