Commit graph

131,169 commits

Author SHA1 Message Date
Henrik Bjoernlund
e77824d81d bridge: cfm: Netlink GET status Interface.
This is the implementation of CFM netlink status
get information interface.

Add new nested netlink attributes. These attributes are used by the
user space to get status information.

GETLINK:
    Request filter RTEXT_FILTER_CFM_STATUS:
    Indicating that CFM status information must be delivered.

    IFLA_BRIDGE_CFM:
        Points to the CFM information.

    IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
        This indicate that the MEP instance status are following.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
        This indicate that the peer MEP status are following.

CFM nested attribute has the following attributes in next level.

GETLINK RTEXT_FILTER_CFM_STATUS:
    IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
        The MEP instance number of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
        The MEP instance received CFM PDU with unexpected Opcode.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
        The MEP instance received CFM PDU with unexpected version.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
        The MEP instance received CCM PDU with MD level lower than
        configured level. This frame is discarded.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
        The MEP instance number of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
        The added Peer MEP ID of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
        The CCM defect status.
        The type is u32 (bool).
        True means no CCM frame is received for 3.25 intervals.
        IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
        The last received CCM PDU RDI.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
        The last received CCM PDU Port Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
        The last received CCM PDU Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
        A CCM frame has been received from Peer MEP.
        The type is u32 (bool).
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
        A CCM frame with TLV has been received from Peer MEP.
        The type is u32 (bool).
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
        A CCM frame with unexpected sequence number has been received
        from Peer MEP.
        The type is u32 (bool).
        When a sequence number is not one higher than previously received
        then it is unexpected.
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.

Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 18:39:44 -07:00
Henrik Bjoernlund
5e312fc0e7 bridge: cfm: Netlink GET configuration Interface.
This is the implementation of CFM netlink configuration
get information interface.

Add new nested netlink attributes. These attributes are used by the
user space to get configuration information.

GETLINK:
    Request filter RTEXT_FILTER_CFM_CONFIG:
    Indicating that CFM configuration information must be delivered.

    IFLA_BRIDGE_CFM:
        Points to the CFM information.

    IFLA_BRIDGE_CFM_MEP_CREATE_INFO:
        This indicate that MEP instance create parameters are following.
    IFLA_BRIDGE_CFM_MEP_CONFIG_INFO:
        This indicate that MEP instance config parameters are following.
    IFLA_BRIDGE_CFM_CC_CONFIG_INFO:
        This indicate that MEP instance CC functionality
        parameters are following.
    IFLA_BRIDGE_CFM_CC_RDI_INFO:
        This indicate that CC transmitted CCM PDU RDI
        parameters are following.
    IFLA_BRIDGE_CFM_CC_CCM_TX_INFO:
        This indicate that CC transmitted CCM PDU parameters are
        following.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO:
        This indicate that the added peer MEP IDs are following.

CFM nested attribute has the following attributes in next level.

GETLINK RTEXT_FILTER_CFM_CONFIG:
    IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
        The created MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
        The created MEP domain.
        The type is u32 (br_cfm_domain).
        It must be BR_CFM_PORT.
        This means that CFM frames are transmitted and received
        directly on the port - untagged. Not in a VLAN.
    IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
        The created MEP direction.
        The type is u32 (br_cfm_mep_direction).
        It must be BR_CFM_MEP_DIRECTION_DOWN.
        This means that CFM frames are transmitted and received on
        the port. Not in the bridge.
    IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
        The created MEP residence port ifindex.
        The type is u32 (ifindex).

    IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
        The deleted MEP instance number.
        The type is u32.

    IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
        The configured MEP unicast MAC address.
        The type is 6*u8 (array).
        This is used as SMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
        The configured MEP unicast MD level.
        The type is u32.
        It must be in the range 1-7.
        No CFM frames are passing through this MEP on lower levels.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
        The configured MEP ID.
        The type is u32.
        It must be in the range 0-0x1FFF.
        This MEP ID is inserted in any transmitted CCM frame.

    IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
        The Continuity Check (CC) functionality is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
        The CC expected receive interval of CCM frames.
        The type is u32 (br_cfm_ccm_interval).
        This is also the transmission interval of CCM frames when enabled.
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
        The CC expected receive MAID in CCM frames.
        The type is CFM_MAID_LENGTH*u8.
        This is MAID is also inserted in transmitted CCM frames.

    IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_MEPID:
        The CC Peer MEP ID added.
        The type is u32.
        When a Peer MEP ID is added and CC is enabled it is expected to
        receive CCM frames from that Peer MEP.

    IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_RDI_RDI:
        The RDI that is inserted in transmitted CCM PDU.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
        The transmitted CCM frame destination MAC address.
        The type is 6*u8 (array).
        This is used as DMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
        The transmitted CCM frame update (increment) of sequence
        number is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
        The period of time where CCM frame are transmitted.
        The type is u32.
        The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
        must be done before timeout to keep transmission alive.
        When period is zero any ongoing CCM frame transmission
        will be stopped.
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
        The transmitted CCM frame update with Interface Status TLV
        is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
        The transmitted Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
        The transmitted CCM frame update with Port Status TLV is enabled
        or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
        The transmitted Port Status TLV value field.
        The type is u8.

Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 18:39:43 -07:00
Henrik Bjoernlund
2be665c394 bridge: cfm: Netlink SET configuration Interface.
This is the implementation of CFM netlink configuration
set information interface.

Add new nested netlink attributes. These attributes are used by the
user space to create/delete/configure CFM instances.

SETLINK:
    IFLA_BRIDGE_CFM:
        Indicate that the following attributes are CFM.

    IFLA_BRIDGE_CFM_MEP_CREATE:
        This indicate that a MEP instance must be created.
    IFLA_BRIDGE_CFM_MEP_DELETE:
        This indicate that a MEP instance must be deleted.
    IFLA_BRIDGE_CFM_MEP_CONFIG:
        This indicate that a MEP instance must be configured.
    IFLA_BRIDGE_CFM_CC_CONFIG:
        This indicate that a MEP instance Continuity Check (CC)
        functionality must be configured.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD:
        This indicate that a CC Peer MEP must be added.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE:
        This indicate that a CC Peer MEP must be removed.
    IFLA_BRIDGE_CFM_CC_CCM_TX:
        This indicate that the CC transmitted CCM PDU must be configured.
    IFLA_BRIDGE_CFM_CC_RDI:
        This indicate that the CC transmitted CCM PDU RDI must be
        configured.

CFM nested attribute has the following attributes in next level.

SETLINK RTEXT_FILTER_CFM_CONFIG:
    IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
        The created MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
        The created MEP domain.
        The type is u32 (br_cfm_domain).
        It must be BR_CFM_PORT.
        This means that CFM frames are transmitted and received
        directly on the port - untagged. Not in a VLAN.
    IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
        The created MEP direction.
        The type is u32 (br_cfm_mep_direction).
        It must be BR_CFM_MEP_DIRECTION_DOWN.
        This means that CFM frames are transmitted and received on
        the port. Not in the bridge.
    IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
        The created MEP residence port ifindex.
        The type is u32 (ifindex).

    IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
        The deleted MEP instance number.
        The type is u32.

    IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
        The configured MEP unicast MAC address.
        The type is 6*u8 (array).
        This is used as SMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
        The configured MEP unicast MD level.
        The type is u32.
        It must be in the range 1-7.
        No CFM frames are passing through this MEP on lower levels.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
        The configured MEP ID.
        The type is u32.
        It must be in the range 0-0x1FFF.
        This MEP ID is inserted in any transmitted CCM frame.

    IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
        The Continuity Check (CC) functionality is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
        The CC expected receive interval of CCM frames.
        The type is u32 (br_cfm_ccm_interval).
        This is also the transmission interval of CCM frames when enabled.
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
        The CC expected receive MAID in CCM frames.
        The type is CFM_MAID_LENGTH*u8.
        This is MAID is also inserted in transmitted CCM frames.

    IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_MEPID:
        The CC Peer MEP ID added.
        The type is u32.
        When a Peer MEP ID is added and CC is enabled it is expected to
        receive CCM frames from that Peer MEP.

    IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_RDI_RDI:
        The RDI that is inserted in transmitted CCM PDU.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
        The transmitted CCM frame destination MAC address.
        The type is 6*u8 (array).
        This is used as DMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
        The transmitted CCM frame update (increment) of sequence
        number is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
        The period of time where CCM frame are transmitted.
        The type is u32.
        The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
        must be done before timeout to keep transmission alive.
        When period is zero any ongoing CCM frame transmission
        will be stopped.
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
        The transmitted CCM frame update with Interface Status TLV
        is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
        The transmitted Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
        The transmitted CCM frame update with Port Status TLV is enabled
        or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
        The transmitted Port Status TLV value field.
        The type is u8.

Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 18:39:43 -07:00
Henrik Bjoernlund
dc32cbb3db bridge: cfm: Kernel space implementation of CFM. CCM frame RX added.
This is the third commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

Functionality is extended with CCM frame reception.
The MEP instance now contains CCM based status information.
Most important is the CCM defect status indicating if correct
CCM frames are received with the expected interval.

Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 18:39:43 -07:00
Henrik Bjoernlund
a806ad8ee2 bridge: cfm: Kernel space implementation of CFM. CCM frame TX added.
This is the second commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

Functionality is extended with CCM frame transmission.

Interface is extended with these functions:
br_cfm_cc_rdi_set()
br_cfm_cc_ccm_tx()
br_cfm_cc_config_set()

A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
    The Continuity Check parameters can be configured to be used when
    transmitting CCM.

A MEP can be configured to start or stop transmission of CCM frames by
br_cfm_cc_ccm_tx()
    The CCM will be transmitted for a selected period in seconds.
    Must call this function before timeout to keep transmission alive.

A MEP transmitting CCM can be configured with inserted RDI in PDU by
br_cfm_cc_rdi_set()

Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 18:39:43 -07:00
Henrik Bjoernlund
86a14b79e1 bridge: cfm: Kernel space implementation of CFM. MEP create/delete.
This is the first commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

It contains MEP instance create, delete and configuration.

Connectivity Fault Management (CFM) comprises capabilities for
detecting, verifying, and isolating connectivity failures in
Virtual Bridged Networks. These capabilities can be used in
networks operated by multiple independent organizations, each
with restricted management access to each others equipment.

CFM functions are partitioned as follows:
    - Path discovery
    - Fault detection
    - Fault verification and isolation
    - Fault notification
    - Fault recovery

Interface consists of these functions:
br_cfm_mep_create()
br_cfm_mep_delete()
br_cfm_mep_config_set()
br_cfm_cc_config_set()
br_cfm_cc_peer_mep_add()
br_cfm_cc_peer_mep_remove()

A MEP instance is created by br_cfm_mep_create()
    -It is the Maintenance association End Point
     described in 802.1Q section 19.2.
    -It is created on a specific level (1-7) and is assuring
     that no CFM frames are passing through this MEP on lower levels.
    -It initiates and validates CFM frames on its level.
    -It can only exist on a port that is related to a bridge.
    -Attributes given cannot be changed until the instance is
     deleted.

A MEP instance can be deleted by br_cfm_mep_delete().

A created MEP instance has attributes that can be
configured by br_cfm_mep_config_set().

A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
    The Continuity Check Receiver state machine can be
    enabled and disabled.
    According to 802.1Q section 19.2.8

A MEP can have Peer MEPs added and removed by
br_cfm_cc_peer_mep_add() and br_cfm_cc_peer_mep_remove()
    The Continuity Check feature can maintain connectivity
    status on each added Peer MEP.

Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 18:39:43 -07:00
Henrik Bjoernlund
fbaedb4129 bridge: uapi: cfm: Added EtherType used by the CFM protocol.
This EtherType is used by all CFM protocal frames transmitted
according to 802.1Q section 12.14.

Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29 18:39:43 -07:00
Gustavo A. R. Silva
5e01fdff04 fs: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29 17:22:59 -05:00
Gustavo A. R. Silva
1200888320 platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29 17:22:59 -05:00
Gustavo A. R. Silva
8835410515 platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29 17:22:59 -05:00
Gustavo A. R. Silva
277ffd6c1e mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29 17:22:59 -05:00
Gustavo A. R. Silva
a4147d855f dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29 17:22:59 -05:00
Linus Torvalds
07e0887302 fallthrough fixes for Clang for 5.10-rc2
Hi Linus,
 
 Please, pull the following patch that fixes almost 40,000 fall-through
 warnings when building Linux 5.10-rc1 with Clang 12.0.0 and this[1]
 change reverted. Notice that in order to enable -Wimplicit-fallthrough
 for Clang, such change[1] is meant to be reverted at some point. So,
 this patch helps to move in that direction.
 
 - include: jhash/signal: Fix fall-through warnings for Clang
 
 [1] commit e2079e93f5 ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAl+bCvUACgkQRwW0y0cG
 2zE10A//W6Q9Ay7e0FaXfBtRbh9rILMRWSJ+TNVBadVhKj4FIXyAwTMpkjxJinD1
 USbG0JZjYbj0Seba8Avvh7RElOf5aFJ5gGtE7jY2PCxzOYI2N+4aaQng6U8W7QpZ
 Zs9lWe1RMYXUSP+YKLaGDjfSUDVbV2kHKR1/SFeCHeV7tllTMupYBdHBrtEAI90k
 YxhUSpsptT3EcAmXBWMy19zViOLlIMqdVzLSU3oTu/ymXvj+bsWor0tALD5mx614
 qxPXk5HvCygDzl9+N7syJkk5yx116ECT5M623bBkA3RrZOhr+HQi6kpHyWMVj0aF
 ZZJeV9k/x2OSpH2fnBQm5QoxxTXoWJrYx0iF7DWwzMktXsgNcnVGJcG1C4aiEn0d
 iM7KAMGvrsU1+l3op9IGfYDYYi1lVEiko+qou78c4o1Oir2oFPKtLsHnySW4KvSj
 3FPnerfRCydVeqoCx3QKMmi9G1Lt6Tzl4XY6Y9teEGFfj2EX+MiUFQBeSIk4BMDx
 CdvkuZfaVasp0ROh86IwF1gBmQ6tAJxTsAFEAfemaHDZeuJxJ6Tpawm1GCl7XF7Q
 ZjYFSY7Nr/Yq7ILE6zGvMNUxxfREU2EoRjQre5xDsMbapATExlr2ZBGApOZhDuB3
 MIP9d6SbfWSTrFpcPE5yRmsOEbZb4XMoY4XMrh5MfdEly1ix7Q4=
 =RZ7h
 -----END PGP SIGNATURE-----

Merge tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fallthrough fix from Gustavo A. R. Silva:
 "This fixes a ton of fall-through warnings when building with Clang
  12.0.0 and -Wimplicit-fallthrough"

* tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  include: jhash/signal: Fix fall-through warnings for Clang
2020-10-29 13:02:52 -07:00
Linus Torvalds
b9c0f4bd5b RDMA 5.10 first rc pull request
Three notable merge window regressions that didn't get caught/fixed in
 time for rc1:
 
 - Fix in kernel users of rxe, they were broken by the rapid fix to undo
   the uABI breakage in rxe from another patch
 
 - EFA userspace needs to read the GID table but was broken with the new
   GID table logic
 
 - Fix user triggerable deadlock in mlx5 using devlink reload
 
 - Fix deadlock in several ULPs using rdma_connect from the CM handler
   callbacks
 
 - Memory leak in qedr
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl+bC4cACgkQOG33FX4g
 mxpYIBAAiYngi01anQSNZzKgtmskJ1IN4Y22zIck78kCxD0GRWebBVtt4fKHF9am
 taZowxoSk2q/CITU96hhEcLRqd3/XWhHBC9tyEPmgNqtU57Sj+2Tei4d7woJF1O1
 ifpVijqLTem0PL2fIm0mHjNXciYrRQ2SLE2xOx2UC/nEou3WGh+/WMr7jRHISxTm
 W86voaOrJUtz4rF8zogvP3Rk1oIAgV8w37zUSRE1ZQM3yJPcVxXb5wa7ksskZ5MC
 uamknMZQyEXpGNqluTQclirrgeX6ArJPwWeoY3O6GoaxUwKcFVGgDFKs/HolTjRn
 +EGUkBsfZ59XiRmC80CHnvi4SO6Zw145tgxl+nFJdBoXVTrfBiWMnduzkxflfGQs
 6pUjVDuw97/hjfgnrmVvtN291AkovbWKQvnMW9EauY5Hx5FmcBi1b6s6tVwW8k1f
 ORDDsXLiL02uqfjEi6EnXjWPnbjRNKJqZG0FfTW4Az6uQYQ6Jxzso6epj3vZir99
 WzfIAG4o+JVR6Hrtvv542yu1B/S0AXegbNo2LG3plW1Tcd906Dx2l1/el00JfeTe
 VQB/Iv6Ka+4ZJBRr91vytWbPRjJyVtV8PVC+lAUweKx+1MOTA5ZJVeCoyD/l++2o
 nYZYiVo3DLoDqfVPjJ01DP3vgyxypg449uXqijhNp/uMA2zE+oc=
 =5WDf
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "The good news is people are testing rc1 in the RDMA world - the bad
  news is testing of the for-next area is not as good as I had hoped, as
  we really should have caught at least the rdma_connect_locked() issue
  before now.

  Notable merge window regressions that didn't get caught/fixed in time
  for rc1:

   - Fix in kernel users of rxe, they were broken by the rapid fix to
     undo the uABI breakage in rxe from another patch

   - EFA userspace needs to read the GID table but was broken with the
     new GID table logic

   - Fix user triggerable deadlock in mlx5 using devlink reload

   - Fix deadlock in several ULPs using rdma_connect from the CM handler
     callbacks

   - Memory leak in qedr"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/qedr: Fix memory leak in iWARP CM
  RDMA: Add rdma_connect_locked()
  RDMA/uverbs: Fix false error in query gid IOCTL
  RDMA/mlx5: Fix devlink deadlock on net namespace deletion
  RDMA/rxe: Fix small problem in network_type patch
2020-10-29 11:50:59 -07:00
Arnd Bergmann
f54ec58fee wimax: move out to staging
There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.

According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether.
As most PCs and phones lack WiMAX hardware support, the remaining
networks tend to use standalone routers. These almost certainly
run Linux, but not a modern kernel or the mainline wimax driver stack.

NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the
www.linuxwimax.org
site had already shut down earlier.

WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.

Move all files into drivers/staging/wimax, including the uapi header
files and documentation, to make it easier to remove it when it gets
to that. Only minimal changes are made to the source files, in order
to make it possible to port patches across the move.

Also remove the MAINTAINERS entry that refers to a broken mailing
list and website.

Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Suggested-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-29 19:27:45 +01:00
Gustavo A. R. Silva
4169e889e5 include: jhash/signal: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, explicitly
add break statements instead of letting the code fall through to the
next case.

This patch adds four break statements that, together, fix almost 40,000
warnings when building Linux 5.10-rc1 with Clang 12.0.0 and this[1] change
reverted. Notice that in order to enable -Wimplicit-fallthrough for Clang,
such change[1] is meant to be reverted at some point. So, this patch helps
to move in that direction.

Something important to mention is that there is currently a discrepancy
between GCC and Clang when dealing with switch fall-through to empty case
statements or to cases that only contain a break/continue/return
statement[2][3][4].

Now that the -Wimplicit-fallthrough option has been globally enabled[5],
any compiler should really warn on missing either a fallthrough annotation
or any of the other case-terminating statements (break/continue/return/
goto) when falling through to the next case statement. Making exceptions
to this introduces variation in case handling which may continue to lead
to bugs, misunderstandings, and a general lack of robustness. The point
of enabling options like -Wimplicit-fallthrough is to prevent human error
and aid developers in spotting bugs before their code is even built/
submitted/committed, therefore eliminating classes of bugs. So, in order
to really accomplish this, we should, and can, move in the direction of
addressing any error-prone scenarios and get rid of the unintentional
fallthrough bug-class in the kernel, entirely, even if there is some minor
redundancy. Better to have explicit case-ending statements than continue to
have exceptions where one must guess as to the right result. The compiler
will eliminate any actual redundancy.

[1] commit e2079e93f5 ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
[2] https://github.com/ClangBuiltLinux/linux/issues/636
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91432
[4] https://godbolt.org/z/xgkvIh
[5] commit a035d552a9 ("Makefile: Globally enable fall-through warning")

Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29 13:17:58 -05:00
Linus Torvalds
598a597636 AFS fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl+ayiUACgkQ+7dXa6fL
 C2uZAg//cVeuhu1cUMzNZwE9VotL0a3GXGl+5S1pyJ4lEiKOylJYyxJxsGEG6YiE
 GxDt9wx78P679Y3VJchDjo7voBXbPqRYFxnbXyq5X/xhNfExRqXhkauao8jWMaku
 77UzretUtav7JmgxkGtQ8eMpYkrua7YqcdvMEVjSJ/TqQi68lcU+rMBTO7UnkURb
 YD43XyFI7D7XXfXpywTc0PYRQi9pEvXryb2OlEvLHLiS0hV9Zj32i6WWmn8GfnhQ
 Q9107kHYZFU2B+O+IbbImkKtlpC9X0yCAGGi2vDd0RirqKK/gfkMlK0XzwjnvzR4
 PoqnMs2yjwcanxTrDD/3gr6MfZ2KRnmrLO6cdRmI3ldSsbkFOSeoQ0DYr4JDdal9
 27OixazIcqmZfIssHwOH5pGZvO9bu5+2hlwdZZV7uISORJnqHZZVZ04Bdy+0chZx
 JTVeyYH2+FDRUM55heVnuI1r6xCbHRyj3On4GF1n8uKrEinkVaEMZCWWcOHlNYnG
 C3DC6MGxS1DRox/bNcBql9Jk6RkzPI/gzliQA92yAngMtOzyn+uZjqftASVve17R
 K9/nSQ/43E9LMc+DIEJ+8KSOkSN1zb6dAJ24Z8g7s+VbVb78WwHxojNjb8J9EfW3
 lo/eTprYtZvidE8PJTisdzyaJooUifMAMhy8eFwPaXdqwRc7Sjc=
 =v0Gd
 -----END PGP SIGNATURE-----

Merge tag 'afs-fixes-20201029' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull AFS fixes from David Howells:

 - Fix copy_file_range() to an afs file now returning EINVAL if the
   splice_write file op isn't supplied.

 - Fix a deref-before-check in afs_unuse_cell().

 - Fix a use-after-free in afs_xattr_get_acl().

 - Fix afs to not try to clear PG_writeback when laundering a page.

 - Fix afs to take a ref on a page that it sets PG_private on and to
   drop that ref when clearing PG_private. This is done through recently
   added helpers.

 - Fix a page leak if write_begin() fails.

 - Fix afs_write_begin() to not alter the dirty region info stored in
   page->private, but rather do this in afs_write_end() instead when we
   know what we actually changed.

 - Fix afs_invalidatepage() to alter the dirty region info on a page
   when partial page invalidation occurs so that we don't inadvertantly
   include a span of zeros that will get written back if a page gets
   laundered due to a remote 3rd-party induced invalidation.

   We mustn't, however, reduce the dirty region if the page has been
   seen to be mapped (ie. we got called through the page_mkwrite vector)
   as the page might still be mapped and we might lose data if the file
   is extended again.

 - Fix the dirty region info to have a lower resolution if the size of
   the page is too large for this to be encoded (e.g. powerpc32 with 64K
   pages).

   Note that this might not be the ideal way to handle this, since it
   may allow some leakage of undirtied zero bytes to the server's copy
   in the case of a 3rd-party conflict.

To aid the last two fixes, two additional changes:

 - Wrap the manipulations of the dirty region info stored in
   page->private into helper functions.

 - Alter the encoding of the dirty region so that the region bounds can
   be stored with one fewer bit, making a bit available for the
   indication of mappedness.

* tag 'afs-fixes-20201029' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix dirty-region encoding on ppc32 with 64K pages
  afs: Fix afs_invalidatepage to adjust the dirty region
  afs: Alter dirty range encoding in page->private
  afs: Wrap page->private manipulations in inline functions
  afs: Fix where page->private is set during write
  afs: Fix page leak on afs_write_begin() failure
  afs: Fix to take ref on page when PG_private is set
  afs: Fix afs_launder_page to not clear PG_writeback
  afs: Fix a use after free in afs_xattr_get_acl()
  afs: Fix tracing deref-before-check
  afs: Fix copy_file_range()
2020-10-29 10:13:09 -07:00
Linus Torvalds
58130a6cd0 Bug fixes for the new ext4 fast commit feature, plus a fix for the
data=journal bug fix.  Also use the generic casefolding support which
 has now landed in fs/libfs.c for 5.10.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl+aP/IACgkQ8vlZVpUN
 gaM62gf+JWHXh4d4RS4UcFlQWmT0JlMK8AGEdt90PGeJwO7MmAUC8KRFdMxCSdMQ
 yqJObRH9w7AFVZYCdroLIC2MyeXj4rASD7DxMgFhu/LYrKOTxCHiTt9gdx/slELM
 HQoKB77pYs4AZOMPgo+svqf9aHtHPu1Bk3M2C5WW4/BZHjKCxXDD7wONPFLHOq/0
 qTcj2JS+1GAivNzwq8/ZFntmbz316FuKF3LNVUvCP+aTbOwD77NtyaBDGr8pnsnz
 duNyX4CYPo27FM9K/ywGQL9ISCIRxEwPN0GeILc3Cawu6bsr5z+ZBYKbt3DuUv18
 hl+E7wrOG/+EMLd6TBfvRN1v5YvwPg==
 =0J5C
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Bug fixes for the new ext4 fast commit feature, plus a fix for the
  'data=journal' bug fix.

  Also use the generic casefolding support which has now landed in
  fs/libfs.c for 5.10"

* tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: indicate that fast_commit is available via /sys/fs/ext4/feature/...
  ext4: use generic casefolding support
  ext4: do not use extent after put_bh
  ext4: use IS_ERR() for error checking of path
  ext4: fix mmap write protection for data=journal mode
  jbd2: fix a kernel-doc markup
  ext4: use s_mount_flags instead of s_mount_state for fast commit state
  ext4: make num of fast commit blocks configurable
  ext4: properly check for dirty state in ext4_inode_datasync_dirty()
  ext4: fix double locking in ext4_fc_commit_dentry_updates()
2020-10-29 09:36:11 -07:00
dmitry.torokhov@gmail.com
c6838eeef2 HID: hid-input: occasionally report stylus battery even if not changed
There are styluses that only report their battery status when they are
touching the touchscreen; additionally we currently suppress battery
reports if capacity has not changed. To help userspace recognize how long
ago the device reported battery status, let's send the change event through
if either capacity has changed, or at least 30 seconds have passed since
last report we've let through.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-10-29 16:14:36 +01:00
Christian König
256dd44bd8 drm/ttm: nuke old page allocator
Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397087/?series=83051&rev=1
2020-10-29 15:57:57 +01:00
Christian König
ee5d2a8e54 drm/ttm: wire up the new pool as default one v2
Provide the necessary parameters by all drivers and use the new pool alloc
when no driver specific function is provided.

v2: fix the GEM VRAM helpers

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397081/?series=83051&rev=1
2020-10-29 15:56:45 +01:00
Christian König
d099fc8f54 drm/ttm: new TT backend allocation pool v3
This replaces the spaghetti code in the two existing page pools.

First of all depending on the allocation size it is between 3 (1GiB) and
5 (1MiB) times faster than the old implementation.

It makes better use of buddy pages to allow for larger physical contiguous
allocations which should result in better TLB utilization at least for
amdgpu.

Instead of a completely braindead approach of filling the pool with one
CPU while another one is trying to shrink it we only give back freed
pages.

This also results in much less locking contention and a trylock free MM
shrinker callback, so we can guarantee that pages are given back to the
system when needed.

Downside of this is that it takes longer for many small allocations until
the pool is filled up. We could address this, but I couldn't find an use
case where this actually matters. We also don't bother freeing large
chunks of pages any more since the CPU overhead in that path isn't really
that important.

The sysfs files are replaced with a single module parameter, allowing
users to override how many pages should be globally pooled in TTM. This
unfortunately breaks the UAPI slightly, but as far as we know nobody ever
depended on this.

Zeroing memory coming from the pool was handled inconsistently. The
alloc_pages() based pool was zeroing it, the dma_alloc_attr() based one
wasn't. For now the new implementation isn't zeroing pages from the pool
either and only sets the __GFP_ZERO flag when necessary.

The implementation has only 768 lines of code compared to the over 2600
of the old one, and also allows for saving quite a bunch of code in the
drivers since we don't need specialized handling there any more based on
kernel config.

Additional to all of that there was a neat bug with IOMMU, coherent DMA
mappings and huge pages which is now fixed in the new code as well.

v2: make ttm_pool_apply_caching static as reported by the kernel bot, add
    some more checks
v3: fix some more checkpatch.pl warnings

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Tested-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/397080/?series=83051&rev=1
2020-10-29 15:52:51 +01:00
Magnus Karlsson
e5e1a4bc91 xsk: Fix possible memory leak at socket close
Fix a possible memory leak at xsk socket close that is caused by the
refcounting of the umem object being wrong. The reference count of the
umem was decremented only after the pool had been freed. Note that if
the buffer pool is destroyed, it is important that the umem is
destroyed after the pool, otherwise the umem would disappear while the
driver is still running. And as the buffer pool needs to be destroyed
in a work queue, the umem is also (if its refcount reaches zero)
destroyed after the buffer pool in that same work queue.

What was missing is that the refcount also needs to be decremented
when the pool is not freed and when the pool has not even been
created. The first case happens when the refcount of the pool is
higher than 1, i.e. it is still being used by some other socket using
the same device and queue id. In this case, it is safe to decrement
the refcount of the umem outside of the work queue as the umem will
never be freed because the refcount of the umem is always greater than
or equal to the refcount of the buffer pool. The second case is if the
buffer pool has not been created yet, i.e. the socket was closed
before it was bound but after the umem was created. In this case, it
is safe to destroy the umem outside of the work queue, since there is
no pool that can use it by definition.

Fixes: 1c1efc2af1 ("xsk: Create and free buffer pool independently from umem")
Reported-by: syzbot+eb71df123dc2be2c1456@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1603801921-2712-1-git-send-email-magnus.karlsson@gmail.com
2020-10-29 15:19:56 +01:00
David Howells
f86726a69d afs: Fix afs_invalidatepage to adjust the dirty region
Fix afs_invalidatepage() to adjust the dirty region recorded in
page->private when truncating a page.  If the dirty region is entirely
removed, then the private data is cleared and the page dirty state is
cleared.

Without this, if the page is truncated and then expanded again by truncate,
zeros from the expanded, but no-longer dirty region may get written back to
the server if the page gets laundered due to a conflicting 3rd-party write.

It mustn't, however, shorten the dirty region of the page if that page is
still mmapped and has been marked dirty by afs_page_mkwrite(), so a flag is
stored in page->private to record this.

Fixes: 4343d00872 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
2020-10-29 13:53:04 +00:00
David Howells
185f0c7073 afs: Wrap page->private manipulations in inline functions
The afs filesystem uses page->private to store the dirty range within a
page such that in the event of a conflicting 3rd-party write to the server,
we write back just the bits that got changed locally.

However, there are a couple of problems with this:

 (1) I need a bit to note if the page might be mapped so that partial
     invalidation doesn't shrink the range.

 (2) There aren't necessarily sufficient bits to store the entire range of
     data altered (say it's a 32-bit system with 64KiB pages or transparent
     huge pages are in use).

So wrap the accesses in inline functions so that future commits can change
how this works.

Also move them out of the tracing header into the in-directory header.
There's not really any need for them to be in the tracing header.

Signed-off-by: David Howells <dhowells@redhat.com>
2020-10-29 13:53:04 +00:00
Rafael J. Wysocki
a62f68f5ca cpufreq: Introduce cpufreq_driver_test_flags()
Add a helper function to test the flags of the cpufreq driver in use
againt a given flags mask.

In particular, this will be needed to test the
CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag in the schedutil
governor.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-29 14:07:30 +01:00
Peter Zijlstra
51b646b2d9 perf,mm: Handle non-page-table-aligned hugetlbfs
A limited nunmber of architectures support hugetlbfs sizes that do not
align with the page-tables (ARM64, Power, Sparc64). Add support for
this to the generic perf_get_page_size() implementation, and also
allow an architecture to override this implementation.

This latter is only needed when it uses non-page-table aligned huge
pages in its kernel map.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2020-10-29 11:00:39 +01:00
Stephane Eranian
995f088efe perf/core: Add support for PERF_SAMPLE_CODE_PAGE_SIZE
When studying code layout, it is useful to capture the page size of the
sampled code address.

Add a new sample type for code page size.
The new sample type requires collecting the ip. The code page size can
be calculated from the NMI-safe perf_get_page_size().

For large PEBS, it's very unlikely that the mapping is gone for the
earlier PEBS records. Enable the feature for the large PEBS. The worst
case is that page-size '0' is returned.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201001135749.2804-5-kan.liang@linux.intel.com
2020-10-29 11:00:39 +01:00
Kan Liang
8d97e71811 perf/core: Add PERF_SAMPLE_DATA_PAGE_SIZE
Current perf can report both virtual addresses and physical addresses,
but not the MMU page size. Without the MMU page size information of the
utilized page, users cannot decide whether to promote/demote large pages
to optimize memory usage.

Add a new sample type for the data MMU page size.

Current perf already has a facility to collect data virtual addresses.
A page walker is required to walk the pages tables and calculate the
MMU page size from a given virtual address.

On some platforms, e.g., X86, the page walker is invoked in an NMI
handler. So the page walker must be NMI-safe and low overhead. Besides,
the page walker should work for both user and kernel virtual address.
The existing generic page walker, e.g., walk_page_range_novma(), is a
little bit complex and doesn't guarantee the NMI-safe. The follow_page()
is only for user-virtual address.

Add a new function perf_get_page_size() to walk the page tables and
calculate the MMU page size. In the function:
- Interrupts have to be disabled to prevent any teardown of the page
  tables.
- For user space threads, the current->mm is used for the page walker.
  For kernel threads and the like, the current->mm is NULL. The init_mm
  is used for the page walker. The active_mm is not used here, because
  it can be NULL.
  Quote from Peter Zijlstra,
  "context_switch() can set prev->active_mm to NULL when it transfers it
   to @next. It does this before @current is updated. So an NMI that
   comes in between this active_mm swizzling and updating @current will
   see !active_mm."
- The MMU page size is calculated from the page table level.

The method should work for all architectures, but it has only been
verified on X86. Should there be some architectures, which support perf,
where the method doesn't work, it can be fixed later separately.
Reporting the wrong page size would not be fatal for the architecture.

Some under discussion features may impact the method in the future.
Quote from Dave Hansen,
  "There are lots of weird things folks are trying to do with the page
   tables, like Address Space Isolation.  For instance, if you get a
   perf NMI when running userspace, current->mm->pgd is *different* than
   the PGD that was in use when userspace was running. It's close enough
   today, but it might not stay that way."
If the case happens later, lots of consecutive page walk errors will
happen. The worst case is that lots of page-size '0' are returned, which
would not be fatal.
In the perf tool, a check is implemented to detect this case. Once it
happens, a kernel patch could be implemented accordingly then.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201001135749.2804-2-kan.liang@linux.intel.com
2020-10-29 11:00:38 +01:00
Mathieu Desnoyers
5bc7850232 sched: fix exit_mm vs membarrier (v4)
exit_mm should issue memory barriers after user-space memory accesses,
before clearing current->mm, to order user-space memory accesses
performed prior to exit_mm before clearing tsk->mm, which has the
effect of skipping the membarrier private expedited IPIs.

exit_mm should also update the runqueue's membarrier_state so
membarrier global expedited IPIs are not sent when they are not
needed.

The membarrier system call can be issued concurrently with do_exit
if we have thread groups created with CLONE_VM but not CLONE_THREAD.

Here is the scenario I have in mind:

Two thread groups are created, A and B. Thread group B is created by
issuing clone from group A with flag CLONE_VM set, but not CLONE_THREAD.
Let's assume we have a single thread within each thread group (Thread A
and Thread B).

The AFAIU we can have:

Userspace variables:

int x = 0, y = 0;

CPU 0                   CPU 1
Thread A                Thread B
(in thread group A)     (in thread group B)

x = 1
barrier()
y = 1
exit()
exit_mm()
current->mm = NULL;
                        r1 = load y
                        membarrier()
                          skips CPU 0 (no IPI) because its current mm is NULL
                        r2 = load x
                        BUG_ON(r1 == 1 && r2 == 0)

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-2-mathieu.desnoyers@efficios.com
2020-10-29 11:00:30 +01:00
Jens Axboe
12db8b6900 entry: Add support for TIF_NOTIFY_SIGNAL
Add TIF_NOTIFY_SIGNAL handling in the generic entry code, which if set,
will return true if signal_pending() is used in a wait loop. That causes an
exit of the loop so that notify_signal tracehooks can be run. If the wait
loop is currently inside a system call, the system call is restarted once
task_work has been processed.

In preparation for only having arch_do_signal() handle syscall restarts if
_TIF_SIGPENDING isn't set, rename it to arch_do_signal_or_restart().  Pass
in a boolean that tells the architecture specific signal handler if it
should attempt to get a signal, or just process a potential syscall
restart.

For !CONFIG_GENERIC_ENTRY archs, add the TIF_NOTIFY_SIGNAL handling to
get_signal(). This is done to minimize the needed architecture changes to
support this feature.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-3-axboe@kernel.dk
2020-10-29 09:37:36 +01:00
Jens Axboe
5c251e9dc0 signal: Add task_sigpending() helper
This is in preparation for maintaining signal_pending() as the decider of
whether or not a schedule() loop should be broken, or continue sleeping.
This is different than the core signal use cases, which really need to know
whether an actual signal is pending or not. task_sigpending() returns
non-zero if TIF_SIGPENDING is set.

Only core kernel use cases should care about the distinction between
the two, make sure those use the task_sigpending() helper.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-2-axboe@kernel.dk
2020-10-29 09:37:36 +01:00
Yonghong Song
cf83b2d2e2 bpf: Permit cond_resched for some iterators
Commit e679654a70 ("bpf: Fix a rcu_sched stall issue with
bpf task/task_file iterator") tries to fix rcu stalls warning
which is caused by bpf task_file iterator when running
"bpftool prog".

      rcu: INFO: rcu_sched self-detected stall on CPU
      rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
      \x09(t=21031 jiffies g=2534773 q=179750)
      NMI backtrace for cpu 7
      CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G        W         5.8.0-00004-g68bfc7f8c1b4 #6
      Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
      Call Trace:
      <IRQ>
      dump_stack+0x57/0x70
      nmi_cpu_backtrace.cold+0x14/0x53
      ? lapic_can_unplug_cpu.cold+0x39/0x39
      nmi_trigger_cpumask_backtrace+0xb7/0xc7
      rcu_dump_cpu_stacks+0xa2/0xd0
      rcu_sched_clock_irq.cold+0x1ff/0x3d9
      ? tick_nohz_handler+0x100/0x100
      update_process_times+0x5b/0x90
      tick_sched_timer+0x5e/0xf0
      __hrtimer_run_queues+0x12a/0x2a0
      hrtimer_interrupt+0x10e/0x280
      __sysvec_apic_timer_interrupt+0x51/0xe0
      asm_call_on_stack+0xf/0x20
      </IRQ>
      sysvec_apic_timer_interrupt+0x6f/0x80
      ...
      task_file_seq_next+0x52/0xa0
      bpf_seq_read+0xb9/0x320
      vfs_read+0x9d/0x180
      ksys_read+0x5f/0xe0
      do_syscall_64+0x38/0x60
      entry_SYSCALL_64_after_hwframe+0x44/0xa9

The fix is to limit the number of bpf program runs to be
one million. This fixed the program in most cases. But
we also found under heavy load, which can increase the wallclock
time for bpf_seq_read(), the warning may still be possible.

For example, calling bpf_delay() in the "while" loop of
bpf_seq_read(), which will introduce artificial delay,
the warning will show up in my qemu run.

  static unsigned q;
  volatile unsigned *p = &q;
  volatile unsigned long long ll;
  static void bpf_delay(void)
  {
         int i, j;

         for (i = 0; i < 10000; i++)
                 for (j = 0; j < 10000; j++)
                         ll += *p;
  }

There are two ways to fix this issue. One is to reduce the above
one million threshold to say 100,000 and hopefully rcu warning will
not show up any more. Another is to introduce a target feature
which enables bpf_seq_read() calling cond_resched().

This patch took second approach as the first approach may cause
more -EAGAIN failures for read() syscalls. Note that not all bpf_iter
targets can permit cond_resched() in bpf_seq_read() as some, e.g.,
netlink seq iterator, rcu read lock critical section spans through
seq_ops->next() -> seq_ops->show() -> seq_ops->next().

For the kernel code with the above hack, "bpftool p" roughly takes
38 seconds to finish on my VM with 184 bpf program runs.
Using the following command, I am able to collect the number of
context switches:
   perf stat -e context-switches -- ./bpftool p >& log
Without this patch,
   69      context-switches
With this patch,
   75      context-switches
This patch added additional 6 context switches, roughly every 6 seconds
to reschedule, to avoid lengthy no-rescheduling which may cause the
above RCU warnings.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201028061054.1411116-1-yhs@fb.com
2020-10-28 14:54:31 -07:00
Thomas Gleixner
8073c1ac82 genirq/msi: Allow shadow declarations of msi_msg:: $member
Architectures like x86 have their MSI messages in various bits of the data,
address_lo and address_hi field. Composing or decomposing these messages
with bitmasks and shifts is possible, but unreadable gunk.

Allow architectures to provide an architecture specific representation for
each member of msi_msg. Provide empty defaults for each and stick them into
an union.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-12-dwmw2@infradead.org
2020-10-28 20:26:25 +01:00
Peilin Ye
7cb4150034 Fonts: Make font size unsigned in font_desc
`width` and `height` are defined as unsigned in our UAPI font descriptor
`struct console_font`. Make them unsigned in our kernel font descriptor
`struct font_desc`, too.

Also, change the corresponding printk() format identifiers from `%d` to
`%u`, in sti_select_fbfont().

Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028105647.1210161-1-yepeilin.cs@gmail.com
2020-10-28 19:40:11 +01:00
Sudeep Dutt
80ade22c06 misc: mic: remove the MIC drivers
This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.

Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.

Cc: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28 19:12:03 +01:00
Mauro Carvalho Chehab
ea4b01d9b8 jbd2: fix a kernel-doc markup
The kernel-doc markup that documents _fc_replay_callback is
missing an asterisk, causing this warning:

	../include/linux/jbd2.h:1271: warning: Function parameter or member 'j_fc_replay_callback' not described in 'journal_s'

When building the docs.

Fixes: 609f928af48f ("jbd2: fast commit recovery path")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6055927ada2015b55b413cdd2670533bdc9a8da2.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28 13:42:36 -04:00
Harshad Shirwadkar
e029c5f279 ext4: make num of fast commit blocks configurable
This patch reserves a field in the jbd2 superblock for number of fast
commit blocks. When this value is non-zero, Ext4 uses this field to
set the number of fast commit blocks.

Fixes: 6866d7b3f2 ("ext4/jbd2: add fast commit initialization")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28 13:42:03 -04:00
Mauro Carvalho Chehab
cf38cc9f1e locking/refcount: move kernel-doc markups to the proper place
Changeset a435b9a143 ("locking/refcount: Provide __refcount API to obtain the old value")
added a set of functions starting with __ that have a new
parameter, adding a series of new warnings:

	$ ./scripts/kernel-doc -none include/linux/refcount.h
	include/linux/refcount.h:169: warning: Function parameter or member 'oldp' not described in '__refcount_add_not_zero'
	include/linux/refcount.h:208: warning: Function parameter or member 'oldp' not described in '__refcount_add'
	include/linux/refcount.h:239: warning: Function parameter or member 'oldp' not described in '__refcount_inc_not_zero'
	include/linux/refcount.h:261: warning: Function parameter or member 'oldp' not described in '__refcount_inc'
	include/linux/refcount.h:291: warning: Function parameter or member 'oldp' not described in '__refcount_sub_and_test'
	include/linux/refcount.h:327: warning: Function parameter or member 'oldp' not described in '__refcount_dec_and_test'
	include/linux/refcount.h:347: warning: Function parameter or member 'oldp' not described in '__refcount_dec'

The issue is that the kernel-doc markups are now misplaced,
as they should be added just before the functions.

So, move the kernel-doc markups to the proper places,
in order to drop the warnings.

It should be noticed that git show produces a crappy output,
for this patch without "--patience" flag.

Fixes: a435b9a143 ("locking/refcount: Provide __refcount API to obtain the old value")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/7985c31d1ace591bc5e1faa05c367f1295b78afd.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-28 11:41:15 -06:00
Mauro Carvalho Chehab
e86c6569c5 net: phy: remove kernel-doc duplication
Sphinx 3 now checks for duplicated function declarations:

	.../Documentation/networking/kapi:143: ../include/linux/phy.h:163: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
	Declaration is 'unsigned int phy_supported_speeds (struct phy_device *phy, unsigned int *speeds, unsigned int size)'.
	.../Documentation/networking/kapi:143: ../include/linux/phy.h:1034: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
	Declaration is 'int phy_read_mmd (struct phy_device *phydev, int devad, u32 regnum)'.
	.../Documentation/networking/kapi:143: ../include/linux/phy.h:1076: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
	Declaration is 'int __phy_read_mmd (struct phy_device *phydev, int devad, u32 regnum)'.
	.../Documentation/networking/kapi:143: ../include/linux/phy.h:1088: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
	Declaration is 'int phy_write_mmd (struct phy_device *phydev, int devad, u32 regnum, u16 val)'.
	.../Documentation/networking/kapi:143: ../include/linux/phy.h:1100: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
	Declaration is 'int __phy_write_mmd (struct phy_device *phydev, int devad, u32 regnum, u16 val)'.

It turns that both the C and the H files have the same
kernel-doc markup for the same functions. Let's drop the
at the header file, keeping the one closer to the code.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/75e9a357f9a716833d2094b04898754876365e68.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-28 11:41:15 -06:00
Mauro Carvalho Chehab
89b4223544 mm: pagemap.h: fix two kernel-doc markups
Changeset a8cf7f272b ("mm: add find_lock_head") renamed the
index parameter, but forgot to update the kernel-doc markups
accordingly.

Fixes: a8cf7f272b ("mm: add find_lock_head")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/dce89b296a4f5f9f8f798d5e76b6736c14a916ac.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-28 11:41:14 -06:00
Mauro Carvalho Chehab
6a6223ec77 blk-mq: docs: add kernel-doc description for a new struct member
As reported by kernel-doc:
	./include/linux/blk-mq.h:267: warning: Function parameter or member 'active_queues_shared_sbitmap' not described in 'blk_mq_tag_set'

There is now a new member for struct blk_mq_tag_set. Add a
description for it, based on the commit that introduced it.

Fixes: f1b49fdc1c ("blk-mq: Record active_queues_shared_sbitmap per tag_set for when using shared sbitmap")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/8e513153b83eefc05e358f51f2632b592c3f6772.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-28 11:26:10 -06:00
Linus Walleij
f1f37abbe6 gpio: Retire the explicit gpio irqchip code
Now that all gpiolib irqchip users have been over to use
the irqchip template, we can finally retire the old code
path and leave just one way in to the irqchip: set up the
template when registering the gpio_chip. For a while
we had two code paths for this which was a bit confusing.

This brings this work to a conclusion, there is now one
way of doing this.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20201019134046.65101-1-linus.walleij@linaro.org
2020-10-28 15:50:06 +01:00
Kent Gibson
2f84a2de53 gpio: uapi: clarify the meaning of 'empty' char arrays
Clarify that a char array containing a string is considered 'empty' if
the first character is the null terminator. The remaining characters
are not relevant to this determination.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201005070329.21055-6-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-28 15:46:47 +01:00
Kent Gibson
c303c51c87 gpio: uapi: remove whitespace
Remove leading whitespace in ABI v1 comment.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201005070329.21055-5-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-28 15:46:47 +01:00
Kent Gibson
2cc522d393 gpio: uapi: kernel-doc formatting improvements
Add kernel-doc formatting to all references to structs, enums, fields
and constants, and move deprecation warnings into the Note section of
the deprecated struct.

Replace 'OR:ed' with 'added', as the former looks odd.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201005070329.21055-4-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-28 15:46:47 +01:00
Kent Gibson
f201602175 gpio: uapi: comment consistency
Make debounce_period_us field documentation consistent with other fields
in the union.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201005070329.21055-3-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-28 15:46:47 +01:00
Kent Gibson
5760648e63 gpio: uapi: fix kernel-doc warnings
Fix kernel-doc warnings, specifically gpioline_info_changed.padding is
not documented and 'GPIO event types' describes defines, which are not
documented by kernel-doc.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201005070329.21055-2-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-28 15:46:46 +01:00
Viresh Kumar
39613eaad3 qcom-geni-se: remove has_opp_table
has_opp_table isn't used anymore, remove it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Link: https://lore.kernel.org/r/08ec1ee1d4252a266956abb5f1e0e0026d753564.1603867487.git.viresh.kumar@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-28 09:23:04 -05:00
Ard Biesheuvel
13150bc541 module: use hidden visibility for weak symbol references
Geert reports that commit be2881824a ("arm64/build: Assert for
unwanted sections") results in build errors on arm64 for configurations
that have CONFIG_MODULES disabled.

The commit in question added ASSERT()s to the arm64 linker script to
ensure that linker generated sections such as .got.plt etc are empty,
but as it turns out, there are corner cases where the linker does emit
content into those sections. More specifically, weak references to
function symbols (which can remain unsatisfied, and can therefore not
be emitted as relative references) will be emitted as GOT and PLT
entries when linking the kernel in PIE mode (which is the case when
CONFIG_RELOCATABLE is enabled, which is on by default).

What happens is that code such as

	struct device *(*fn)(struct device *dev);
	struct device *iommu_device;

	fn = symbol_get(mdev_get_iommu_device);
	if (fn) {
		iommu_device = fn(dev);

essentially gets converted into the following when CONFIG_MODULES is off:

	struct device *iommu_device;

	if (&mdev_get_iommu_device) {
		iommu_device = mdev_get_iommu_device(dev);

where mdev_get_iommu_device is emitted as a weak symbol reference into
the object file. The first reference is decorated with an ordinary
ABS64 data relocation (which yields 0x0 if the reference remains
unsatisfied). However, the indirect call is turned into a direct call
covered by a R_AARCH64_CALL26 relocation, which is converted into a
call via a PLT entry taking the target address from the associated
GOT entry.

Given that such GOT and PLT entries are unnecessary for fully linked
binaries such as the kernel, let's give these weak symbol references
hidden visibility, so that the linker knows that the weak reference
via R_AARCH64_CALL26 can simply remain unsatisfied.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20201027151132.14066-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-10-28 14:08:54 +00:00