Commit graph

131,169 commits

Author SHA1 Message Date
Grzegorz Jaszczyk
ba59c9b43c soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX
The IEPCLK_MUX is present on all SoCs whereas the CORECLK_MUX is present
only on AM65x SoCs and J721E. Add support for both these CLK muxes.

This allows the clock rates and clock parents for these to be controlled
through DT leveraging the clk infrastructure for configuring the default
parents and rates.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-09-11 21:47:10 -07:00
Suman Anna
dc1129564a soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
The Programmable Real-Time Unit - Industrial Communication
Subsystem (PRU-ICSS) is present on various TI SoCs such as
AM335x or AM437x or the Keystone 66AK2G. Each SoC can have
one or more PRUSS instances that may or may not be identical.
For example, AM335x SoCs have a single PRUSS, while AM437x has
two PRUSS instances PRUSS1 and PRUSS0, with the PRUSS0 being
a cut-down version of the PRUSS1.

The PRUSS consists of dual 32-bit RISC cores called the
Programmable Real-Time Units (PRUs), some shared, data and
instruction memories, some internal peripheral modules, and
an interrupt controller. The programmable nature of the PRUs
provide flexibility to implement custom peripheral interfaces,
fast real-time responses, or specialized data handling.

The PRU-ICSS functionality is achieved through three different
platform drivers addressing a specific portion of the PRUSS.
Some sub-modules of the PRU-ICSS IP reuse some of the existing
drivers (like davinci mdio driver or the generic syscon driver).
This design provides flexibility in representing the different
modules of PRUSS accordingly, and at the same time allowing the
PRUSS driver to add some instance specific configuration within
an SoC.

The PRUSS platform driver deals with the overall PRUSS and is
used for managing the subsystem level resources like various
memories and the CFG module. It is responsible for the creation
and deletion of the platform devices for the child PRU devices
and other child devices (like Interrupt Controller, MDIO node
and some syscon nodes) so that they can be managed by specific
platform drivers. The PRUSS interrupt controller is managed by
an irqchip driver, while the individual PRU RISC cores are
managed by a PRU remoteproc driver.

The driver currently supports the AM335x SoC, and support for
other TI SoCs will be added in subsequent patches.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-09-11 21:43:34 -07:00
Divya Koppera
1623ad8ec0 net: phy: mchp: Add support for LAN8814 QUAD PHY
LAN8814 is a low-power, quad-port triple-speed (10BASE-T/100BASETX/1000BASE-T)
Ethernet physical layer transceiver (PHY). It supports transmission and
reception of data on standard CAT-5, as well as CAT-5e and CAT-6, unshielded
twisted pair (UTP) cables.

LAN8814 supports industry-standard QSGMII (Quad Serial Gigabit Media
Independent Interface) and Q-USGMII (Quad Universal Serial Gigabit Media
Independent Interface) providing chip-to-chip connection to four Gigabit
Ethernet MACs using a single serialized link (differential pair) in each
direction.

The LAN8814 SKU supports high-accuracy timestamping functions to
support IEEE-1588 solutions using Microchip Ethernet switches, as well as
customer solutions based on SoCs and FPGAs.

The LAN8804 SKU has same features as that of LAN8814 SKU except that it does
not support 1588, SyncE, or Q-USGMII with PCH/MCH.

This adds support for 10BASE-T, 100BASE-TX, and 1000BASE-T,
QSGMII link with the MAC.

Signed-off-by: Divya Koppera<divya.koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11 17:41:55 -07:00
Vladimir Oltean
5899ee367a net: dsa: tag_8021q: add a context structure
While working on another tag_8021q driver implementation, some things
became apparent:

- It is not mandatory for a DSA driver to offload the tag_8021q VLANs by
  using the VLAN table per se. For example, it can add custom TCAM rules
  that simply encapsulate RX traffic, and redirect & decapsulate rules
  for TX traffic. For such a driver, it makes no sense to receive the
  tag_8021q configuration through the same callback as it receives the
  VLAN configuration from the bridge and the 8021q modules.

- Currently, sja1105 (the only tag_8021q user) sets a
  priv->expect_dsa_8021q variable to distinguish between the bridge
  calling, and tag_8021q calling. That can be improved, to say the
  least.

- The crosschip bridging operations are, in fact, stateful already. The
  list of crosschip_links must be kept by the caller and passed to the
  relevant tag_8021q functions.

So it would be nice if the tag_8021q configuration was more
self-contained. This patch attempts to do that.

Create a struct dsa_8021q_context which encapsulates a struct
dsa_switch, and has 2 function pointers for adding and deleting a VLAN.
These will replace the previous channel to the driver, which was through
the .port_vlan_add and .port_vlan_del callbacks of dsa_switch_ops.

Also put the list of crosschip_links into this dsa_8021q_context.
Drivers that don't support cross-chip bridging can simply omit to
initialize this list, as long as they dont call any cross-chip function.

The sja1105_vlan_add and sja1105_vlan_del functions are refactored into
a smaller sja1105_vlan_add_one, which now has 2 entry points:
- sja1105_vlan_add, from struct dsa_switch_ops
- sja1105_dsa_8021q_vlan_add, from the tag_8021q ops
But even this change is fairly trivial. It just reflects the fact that
for sja1105, the VLANs from these 2 channels end up in the same hardware
table. However that is not necessarily true in the general sense (and
that's the reason for making this change).

The rest of the patch is mostly plain refactoring of "ds" -> "ctx". The
dsa_8021q_context structure needs to be propagated because adding a VLAN
is now done through the ops function pointers inside of it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11 17:30:43 -07:00
Vladimir Oltean
7e092af2f3 net: dsa: tag_8021q: setup tagging via a single function call
There is no point in calling dsa_port_setup_8021q_tagging for each
individual port. Additionally, it will become more difficult to do that
when we'll have a context structure to tag_8021q (next patch). So
refactor this now.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11 17:30:43 -07:00
Vladimir Oltean
568a36a69b net: dsa: tag_8021q: include missing refcount.h
The previous assumption was that the caller would already have this
header file included.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11 17:30:43 -07:00
Rodrigo Vivi
0ea8a56de2 Merge drm/drm-next into drm-intel-next-queued
Sync drm-intel-gt-next here so we can have an unified fixes flow.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-09-11 20:00:20 -04:00
Song Liu
7b26410b05 block: introduce part_[begin|end]_io_acct
These functions can be used to enable iostat for partitions on devices
like md, bcache.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-11 16:41:30 -06:00
Linus Torvalds
e9287bd248 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "Usual driver bugfixes for the I2C subsystem"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: algo: pca: Reapply i2c bus settings after reset
  i2c: npcm7xx: Fix timeout calculation
  misc: eeprom: at24: register nvmem only after eeprom is ready to use
2020-09-11 13:43:05 -07:00
Chao Yu
32c0fec1aa f2fs: trace: fix typo
Fixes a typo from 'compreesed' to 'compressed'.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-11 11:11:25 -07:00
Chao Yu
093749e296 f2fs: support age threshold based garbage collection
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.

This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:

1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
 0 means youngest, 100 means oldest, if we set age threshold to 80
 then select dirty segments which has age in range of [80, 100] as
 candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;

2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.

3. merge valid blocks from source victim into target victim with
SSR alloctor.

Test steps:
- create 160 dirty segments:
 * half of them have 128 valid blocks per segment
 * left of them have 384 valid blocks per segment
- run background GC

Benefit: GC count and block movement count both decrease obviously:

- Before:
  - Valid: 86
  - Dirty: 1
  - Prefree: 11
  - Free: 6001 (6001)

GC calls: 162 (BG: 220)
  - data segments : 160 (160)
  - node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
  - data blocks : 40960 (40960)
  - node blocks : 494 (494)

IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments

- After:

  - Valid: 87
  - Dirty: 0
  - Prefree: 4
  - Free: 6008 (6008)

GC calls: 75 (BG: 76)
  - data segments : 74 (74)
  - node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
  - data blocks : 12544 (12544)
  - node blocks : 269 (269)

IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments

Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-11 11:11:15 -07:00
Huacai Chen
15e9e35cd1 KVM: MIPS: Change the definition of kvm type
MIPS defines two kvm types:

 #define KVM_VM_MIPS_TE          0
 #define KVM_VM_MIPS_VZ          1

In Documentation/virt/kvm/api.rst it is said that "You probably want to
use 0 as machine type", which implies that type 0 be the "automatic" or
"default" type. And, in user-space libvirt use the null-machine (with
type 0) to detect the kvm capability, which returns "KVM not supported"
on a VZ platform.

I try to fix it in QEMU but it is ugly:
https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html

And Thomas Huth suggests me to change the definition of kvm type:
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html

So I define like this:

 #define KVM_VM_MIPS_AUTO        0
 #define KVM_VM_MIPS_VZ          1
 #define KVM_VM_MIPS_TE          2

Since VZ and TE cannot co-exists, using type 0 on a TE platform will
still return success (so old user-space tools have no problems on new
kernels); the advantage is that using type 0 on a VZ platform will not
return failure. So, the only problem is "new user-space tools use type
2 on old kernels", but if we treat this as a kernel bug, we can backport
this patch to old stable kernels.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-11 13:22:52 -04:00
Mauro Carvalho Chehab
78ff97ebd4 iio: iio.h: fix a warning at the kernel-doc markup
There's a warning at iio.h kernel-doc markup:

	./include/linux/iio/iio.h:644: WARNING: Unknown target name: "devm".

Because it is using {devm_}foo notation. Well, this is not
a valid kernel-doc notation. Also, it prevents creating hyperlinks
to other documentation functions.

So, replace it to a better notation.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/d8f2275c438c459ede4e6fba03ce719cc6ad898b.1599660067.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-09-11 09:39:57 -06:00
Marc Zyngier
ae8bd85ca8 Merge branch 'kvm-arm64/pt-new' into kvmarm-master/next
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-11 15:54:30 +01:00
Rafael J. Wysocki
d64e6906d1 Merge branch 'powercap'
* powercap:
  powercap: make documentation reflect code
  powercap/intel_rapl: add support for AlderLake
  powercap/intel_rapl: add support for RocketLake
  powercap/intel_rapl: add support for TigerLake Desktop
2020-09-11 16:46:01 +02:00
Rafael J. Wysocki
85f9402003 ACPI: OSL: Make ACPICA use logical addresses of GPE blocks
Define ACPI_GPE_USE_LOGICAL_ADDRESSES in aclinux.h and modify
acpi_os_initialize() to store the logical addresses of the FADT GPE
blocks 0 and 1 in acpi_gbl_xgpe0_block_logical_address and
acpi_gbl_xgpe1_block_logical_address, respectively, so as to allow
ACPICA to use them for accessing GPE registers in system memory,
instead of using their physical addresses and looking up the
corresponding logical addresses on every access attempt, which is
inefficient.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-11 16:45:00 +02:00
Rafael J. Wysocki
6915564dc5 ACPI: OSL: Change the type of acpi_os_map_generic_address() return value
Modify acpi_os_map_generic_address() to return the pointer returned
by acpi_os_map_iomem() which represents the logical address
corresponding to the struct acpi_generic_address argument passed to
it or NULL if that address cannot be obtained (for example, the
argument does not represent an address in system memory or it could
not be mapped by the OS).

Among other things, that will allow the ACPI OS layer to pass the
logical addresses of the FADT GPE blocks 0 and 1 to ACPICA going
forward.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-11 16:45:00 +02:00
Michal Kalderon
97fb3e3347 qede: Notify qedr when mtu has changed
MTU change on ethtool is currently not supported for iWARP.  Notify qedr
driver so that appropriate logging can take place.

Link: https://lore.kernel.org/r/20200902165741.8355-6-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-11 10:24:54 -03:00
Bob Pearson
b60b9c0274 RDMA/core: Added missing WR and WC opcodes
Add work completion opcodes to a new ib_uverbs_wc_opcode enum in
ib_user_verbs.h. This plays the same role as ib_uverbs_wr_opcode
documenting the opcodes in the user space API.

Assigned the IB_WC_XXX opcodes in ib_verbs.h to the IB_UVERBS_WC_XXX
where they are defined. This follows the same pattern as the IB_WR_XXX
opcodes. This fixes an incorrect value for LSO that had crept in but
is not currently being used.

Added a missing IB_WR_BIND_MW opcode in ib_verbs.h.

Link: https://lore.kernel.org/r/20200903224039.437391-2-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-11 10:24:54 -03:00
Jason Gunthorpe
b3003a7445 RDMA/qedr: Remove fbo and zbva from the MR
zbva is always false, so fbo is never read.

A 'zero-based-virtual-address' is simply IOVA == 0, and the driver already
supports this.

Link: https://lore.kernel.org/r/16-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-11 10:24:54 -03:00
Jason Gunthorpe
81655d3c4a RDMA/mlx4: Use ib_umem_num_dma_blocks()
For the calls linked to mlx4_ib_umem_calc_optimal_mtt_size() use
ib_umem_num_dma_blocks() inside the function, it is just some weird static
default.

All other places are just using it with PAGE_SIZE, switch to
ib_umem_num_dma_blocks().

As this is the last call site, remove ib_umem_num_count().

Link: https://lore.kernel.org/r/15-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-11 10:24:54 -03:00
Jason Gunthorpe
a665aca89a RDMA/umem: Split ib_umem_num_pages() into ib_umem_num_dma_blocks()
ib_umem_num_pages() should only be used by things working with the SGL in
CPU pages directly.

Drivers building DMA lists should use the new ib_num_dma_blocks() which
returns the number of blocks rdma_umem_for_each_block() will return.

To make this general for DMA drivers requires a different implementation.
Computing DMA block count based on umem->address only works if the
requested page size is < PAGE_SIZE and/or the IOVA == umem->address.

Instead the number of DMA pages should be computed in the IOVA address
space, not umem->address. Thus the IOVA has to be stored inside the umem
so it can be used for these calculations.

For now set it to umem->address by default and fix it up if
ib_umem_find_best_pgsz() was called. This allows drivers to be converted
to ib_umem_num_dma_blocks() safely.

Link: https://lore.kernel.org/r/6-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-11 10:24:53 -03:00
Neil Armstrong
a328ca7e4a drm/bridge: dw-mipi-dsi: permit configuring the escape clock rate
The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency
higher than 10MHz for the TX Escape Clock, thus make the target rate
configurable.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904125531.15248-1-narmstrong@baylibre.com
2020-09-11 15:01:36 +02:00
Vinod Koul
4c80e93239 Linux 5.9-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
 oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
 xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
 +n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
 6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
 fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
 Z6t4/DA=
 =bcA4
 -----END PGP SIGNATURE-----

Merge tag 'v5.9-rc4' into next

Linux 5.9-rc4
2020-09-11 17:45:36 +05:30
Christian König
48e07c23cb drm/ttm: nuke memory type flags
It's not supported to specify more than one of those flags.
So it never made sense to make this a flag in the first place.

Nuke the flags and specify directly which memory type to use.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389826/?series=81551&rev=1
2020-09-11 13:31:23 +02:00
Christian König
7053e0eab4 drm/vram-helper: stop using TTM placement flags
Those are going to be removed, stop using them here.

Instead define separate flags for the helper.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389823/?series=81551&rev=1
2020-09-11 13:31:23 +02:00
Daniel Winkler
d5ea32da87 Bluetooth: Add MGMT capability flags for tx power and ext advertising
For new advertising features, it will be important for userspace to
know the capabilities of the controller and kernel. If the controller
and kernel support extended advertising, we include flags indicating
hardware offloading support and support for setting tx power of adv
instances.

In the future, vendor-specific commands may allow the setting of tx
power in advertising instances, but for now this feature is only
marked available if extended advertising is supported.

This change is manually verified in userspace by ensuring the
advertising manager's supported_flags field is updated with new flags on
hatch chromebook (ext advertising supported).

Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11 09:17:26 +02:00
Christoph Hellwig
5ceda74093 dma-direct: rename and cleanup __phys_to_dma
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious.  Try
to improve the situation by renaming __phys_to_dma to
phys_to_dma_unencryped, and not forcing architectures that want to
override phys_to_dma to actually provide __phys_to_dma.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11 09:14:43 +02:00
Christoph Hellwig
7bc5c428a6 dma-direct: remove __dma_to_phys
There is no harm in just always clearing the SME encryption bit, while
significantly simplifying the interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11 09:14:25 +02:00
Christoph Hellwig
2f5388a29b dma-direct: remove dma_direct_{alloc,free}_pages
Just merge these helpers into the main dma_direct_{alloc,free} routines,
as the additional checks are always false for the two callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11 09:10:29 +02:00
Christoph Hellwig
abdaf11ac1 dma-mapping: add (back) arch_dma_mark_clean for ia64
Add back a hook to optimize dcache flushing after reading executable
code using DMA.  This gets ia64 out of the business of pretending to
be dma incoherent just for this optimization.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-11 09:10:17 +02:00
Atish Patra
6d0fd53618 include: pe.h: Add RISC-V related PE definition
Define RISC-V related machine types.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200415195422.19866-3-atish.patra@wdc.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-09-11 09:30:01 +03:00
Herbert Xu
5f254dd440 crypto: cbc - Remove cbc.h
Now that crypto/cbc.h is only used by the generic cbc template,
we can merge it back into the CBC code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-11 14:39:16 +10:00
Ard Biesheuvel
e33d2a7b30 SUNRPC: remove RC4-HMAC-MD5 support from KerberosV
The RC4-HMAC-MD5 KerberosV algorithm is based on RFC 4757 [0], which
was specifically issued for interoperability with Windows 2000, but was
never intended to receive the same level of support. The RFC says

  The IETF Kerberos community supports publishing this specification as
  an informational document in order to describe this widely
  implemented technology.  However, while these encryption types
  provide the operations necessary to implement the base Kerberos
  specification [RFC4120], they do not provide all the required
  operations in the Kerberos cryptography framework [RFC3961].  As a
  result, it is not generally possible to implement potential
  extensions to Kerberos using these encryption types.  The Kerberos
  encryption type negotiation mechanism [RFC4537] provides one approach
  for using such extensions even when a Kerberos infrastructure uses
  long-term RC4 keys.  Because this specification does not implement
  operations required by RFC 3961 and because of security concerns with
  the use of RC4 and MD4 discussed in Section 8, this specification is
  not appropriate for publication on the standards track.

  The RC4-HMAC encryption types are used to ease upgrade of existing
  Windows NT environments, provide strong cryptography (128-bit key
  lengths), and provide exportable (meet United States government
  export restriction requirements) encryption.  This document describes
  the implementation of those encryption types.

Furthermore, this RFC was re-classified as 'historic' by RFC 8429 [1] in
2018, stating that 'none of the encryption types it specifies should be
used'

Note that other outdated algorithms are left in place (some of which are
guarded by CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES), so this should only
adversely affect interoperability with Windows NT/2000 systems that have
not received any updates since 2008 (but are connected to a network
nonetheless)

[0] https://tools.ietf.org/html/rfc4757
[1] https://tools.ietf.org/html/rfc8429

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-11 14:39:15 +10:00
Neal Cardwell
29a949325c tcp: simplify tcp_set_congestion_control(): Always reinitialize
Now that the previous patches ensure that all call sites for
tcp_set_congestion_control() want to initialize congestion control, we
can simplify tcp_set_congestion_control() by removing the reinit
argument and the code to support it.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
2020-09-10 20:53:01 -07:00
Neal Cardwell
8919a9b31e tcp: Only init congestion control if not initialized already
Change tcp_init_transfer() to only initialize congestion control if it
has not been initialized already.

With this new approach, we can arrange things so that if the EBPF code
sets the congestion control by calling setsockopt(TCP_CONGESTION) then
tcp_init_transfer() will not re-initialize the CC module.

This is an approach that has the following beneficial properties:

(1) This allows CC module customizations made by the EBPF called in
    tcp_init_transfer() to persist, and not be wiped out by a later
    call to tcp_init_congestion_control() in tcp_init_transfer().

(2) Does not flip the order of EBPF and CC init, to avoid causing bugs
    for existing code upstream that depends on the current order.

(3) Does not cause 2 initializations for for CC in the case where the
    EBPF called in tcp_init_transfer() wants to set the CC to a new CC
    algorithm.

(4) Allows follow-on simplifications to the code in net/core/filter.c
    and net/ipv4/tcp_cong.c, which currently both have some complexity
    to special-case CC initialization to avoid double CC
    initialization if EBPF sets the CC.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
2020-09-10 20:53:01 -07:00
Song Liu
1aef5b4391 bpf: Fix comment for helper bpf_current_task_under_cgroup()
This should be "current" not "skb".

Fixes: c6b5fb8690 ("bpf: add documentation for eBPF helpers (42-50)")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/bpf/20200910203314.70018-1-songliubraving@fb.com
2020-09-10 20:04:51 -07:00
Lorenz Bauer
d66423fbe1 bpf: Plug hole in struct bpf_sk_lookup_kern
As Alexei points out, struct bpf_sk_lookup_kern has two 4-byte holes.
This leads to suboptimal instructions being generated (IPv4, x86):

    1372                    struct bpf_sk_lookup_kern ctx = {
       0xffffffff81b87f30 <+624>:   xor    %eax,%eax
       0xffffffff81b87f32 <+626>:   mov    $0x6,%ecx
       0xffffffff81b87f37 <+631>:   lea    0x90(%rsp),%rdi
       0xffffffff81b87f3f <+639>:   movl   $0x110002,0x88(%rsp)
       0xffffffff81b87f4a <+650>:   rep stos %rax,%es:(%rdi)
       0xffffffff81b87f4d <+653>:   mov    0x8(%rsp),%eax
       0xffffffff81b87f51 <+657>:   mov    %r13d,0x90(%rsp)
       0xffffffff81b87f59 <+665>:   incl   %gs:0x7e4970a0(%rip)
       0xffffffff81b87f60 <+672>:   mov    %eax,0x8c(%rsp)
       0xffffffff81b87f67 <+679>:   movzwl 0x10(%rsp),%eax
       0xffffffff81b87f6c <+684>:   mov    %ax,0xa8(%rsp)
       0xffffffff81b87f74 <+692>:   movzwl 0x38(%rsp),%eax
       0xffffffff81b87f79 <+697>:   mov    %ax,0xaa(%rsp)

Fix this by moving around sport and dport. pahole confirms there
are no more holes:

    struct bpf_sk_lookup_kern {
        u16                        family;       /*     0     2 */
        u16                        protocol;     /*     2     2 */
        __be16                     sport;        /*     4     2 */
        u16                        dport;        /*     6     2 */
        struct {
                __be32             saddr;        /*     8     4 */
                __be32             daddr;        /*    12     4 */
        } v4;                                    /*     8     8 */
        struct {
                const struct in6_addr  * saddr;  /*    16     8 */
                const struct in6_addr  * daddr;  /*    24     8 */
        } v6;                                    /*    16    16 */
        struct sock *              selected_sk;  /*    32     8 */
        bool                       no_reuseport; /*    40     1 */

        /* size: 48, cachelines: 1, members: 8 */
        /* padding: 7 */
        /* last cacheline: 48 bytes */
    };

The assembly also doesn't contain the pesky rep stos anymore:

    1372                    struct bpf_sk_lookup_kern ctx = {
       0xffffffff81b87f60 <+624>:   movzwl 0x10(%rsp),%eax
       0xffffffff81b87f65 <+629>:   movq   $0x0,0xa8(%rsp)
       0xffffffff81b87f71 <+641>:   movq   $0x0,0xb0(%rsp)
       0xffffffff81b87f7d <+653>:   mov    %ax,0x9c(%rsp)
       0xffffffff81b87f85 <+661>:   movzwl 0x38(%rsp),%eax
       0xffffffff81b87f8a <+666>:   movq   $0x0,0xb8(%rsp)
       0xffffffff81b87f96 <+678>:   mov    %ax,0x9e(%rsp)
       0xffffffff81b87f9e <+686>:   mov    0x8(%rsp),%eax
       0xffffffff81b87fa2 <+690>:   movq   $0x0,0xc0(%rsp)
       0xffffffff81b87fae <+702>:   movl   $0x110002,0x98(%rsp)
       0xffffffff81b87fb9 <+713>:   mov    %eax,0xa0(%rsp)
       0xffffffff81b87fc0 <+720>:   mov    %r13d,0xa4(%rsp)

1: https://lore.kernel.org/bpf/CAADnVQKE6y9h2fwX6OS837v-Uf+aBXnT_JXiN_bbo2gitZQ3tA@mail.gmail.com/

Fixes: e9ddbb7707 ("bpf: Introduce SK_LOOKUP program type with a dedicated attach point")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20200910110248.198326-1-lmb@cloudflare.com
2020-09-10 17:47:50 -07:00
Nicolas Dichtel
553d87b658 netlink: fix doc about nlmsg_parse/nla_validate
There is no @validate argument.

CC: Johannes Berg <johannes.berg@intel.com>
Fixes: 3de6440354 ("netlink: re-add parse/validate functions in strict mode")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 15:13:43 -07:00
Daniel Rosenberg
eca4873ee1 f2fs: Use generic casefolding support
This switches f2fs over to the generic support provided in
the previous patch.

Since casefolded dentries behave the same in ext4 and f2fs, we decrease
the maintenance burden by unifying them, and any optimizations will
immediately apply to both.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-10 14:03:31 -07:00
Daniel Rosenberg
c843843e71 fs: Add standard casefolding support
This adds general supporting functions for filesystems that use
utf8 casefolding. It provides standard dentry_operations and adds the
necessary structures in struct super_block to allow this standardization.

The new dentry operations are functionally equivalent to the existing
operations in ext4 and f2fs, apart from the use of utf8_casefold_hash to
avoid an allocation.

By providing a common implementation, all users can benefit from any
optimizations without needing to port over improvements.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-10 14:03:31 -07:00
Daniel Rosenberg
3d7bfea8b8 unicode: Add utf8_casefold_hash
This adds a case insensitive hash function to allow taking the hash
without needing to allocate a casefolded copy of the string.

The existing d_hash implementations for casefolding allocate memory
within rcu-walk, by avoiding it we can be more efficient and avoid
worrying about a failed allocation.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-10 14:03:31 -07:00
Miaohe Lin
83896b0bd8 net: Fix broken NETIF_F_CSUM_MASK spell in netdev_features.h
Remove the weird space inside the NETIF_F_CSUM_MASK.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 13:30:22 -07:00
Wei Wang
ac8f1710c1 tcp: reflect tos value received in SYN to the socket
This commit adds a new TCP feature to reflect the tos value received in
SYN, and send it out on the SYN-ACK, and eventually set the tos value of
the established socket with this reflected tos value. This provides a
way to set the traffic class/QoS level for all traffic in the same
connection to be the same as the incoming SYN request. It could be
useful in data centers to provide equivalent QoS according to the
incoming request.
This feature is guarded by /proc/sys/net/ipv4/tcp_reflect_tos, and is by
default turned off.

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 13:15:40 -07:00
Wei Wang
de033b7d15 ip: pass tos into ip_build_and_send_pkt()
This commit adds tos as a new passed in parameter to
ip_build_and_send_pkt() which will be used in the later commit.
This is a pure restructure and does not have any functional change.

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 13:15:40 -07:00
Wei Wang
e9b12edc13 tcp: record received TOS value in the request socket
A new field is added to the request sock to record the TOS value
received on the listening socket during 3WHS:
When not under syn flood, it is recording the TOS value sent in SYN.
When under syn flood, it is recording the TOS value sent in the ACK.
This is a preparation patch in order to do TOS reflection in the later
commit.

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 13:15:40 -07:00
Jakub Kicinski
4d092dd204 net: manage napi add/del idempotence explicitly
To RCUify napi->dev_list we need to replace list_del_init()
with list_del_rcu(). There is no _init() version for RCU for
obvious reasons. Up until now netif_napi_del() was idempotent
so to make sure it remains such add a bit which is set when
NAPI is listed, and cleared when it removed. Since we don't
expect multiple calls to netif_napi_add() to be correct,
add a warning on that side.

Now that napi_hash_add / napi_hash_del are only called by
napi_add / del we can actually steal its bit. We just need
to make sure hash node is initialized correctly.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 13:08:46 -07:00
Jakub Kicinski
5198d545db net: remove napi_hash_del() from driver-facing API
We allow drivers to call napi_hash_del() before calling
netif_napi_del() to batch RCU grace periods. This makes
the API asymmetric and leaks internal implementation details.
Soon we will want the grace period to protect more than just
the NAPI hash table.

Restructure the API and have drivers call a new function -
__netif_napi_del() if they want to take care of RCU waits.

Note that only core was checking the return status from
napi_hash_del() so the new helper does not report if the
NAPI was actually deleted.

Some notes on driver oddness:
 - veth observed the grace period before calling netif_napi_del()
   but that should not matter
 - myri10ge observed normal RCU flavor
 - bnx2x and enic did not actually observe the grace period
   (unless they did so implicitly)
 - virtio_net and enic only unhashed Rx NAPIs

The last two points seem to indicate that the calls to
napi_hash_del() were a left over rather than an optimization.
Regardless, it's easy enough to correct them.

This patch may introduce extra synchronize_net() calls for
interfaces which set NAPI_STATE_NO_BUSY_POLL and depend on
free_netdev() to call netif_napi_del(). This seems inevitable
since we want to use RCU for netpoll dev->napi_list traversal,
and almost no drivers set IFF_DISABLE_NETPOLL.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 13:08:46 -07:00
Paul Davey
c8715a8e9f ipmr: Add high byte of VIF ID to igmpmsg
Use the unused3 byte in struct igmpmsg to hold the high 8 bits of the
VIF ID.

If using more than 255 IPv4 multicast interfaces it is necessary to have
access to a VIF ID for cache reports that is wider than 8 bits, the VIF
ID present in the igmpmsg reports sent to mroute_sk was only 8 bits wide
in the igmpmsg header.  Adding the high 8 bits of the 16 bit VIF ID in
the unused byte allows use of more than 255 IPv4 multicast interfaces.

Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 12:25:51 -07:00
Paul Davey
501cb00890 ipmr: Add route table ID to netlink cache reports
Insert the multicast route table ID as a Netlink attribute to Netlink
cache report notifications.

When multiple route tables are in use it is necessary to have a way to
determine which route table a given cache report belongs to when
receiving the cache report.

Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10 12:25:51 -07:00