Add an helper function to parse common device properties in the same
way as v4l2_fwnode_endpoint_parse() parses common endpoint properties.
Parse the 'rotation' and 'orientation' properties from the firmware
interface.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for the newly defined V4L2_CID_CAMERA_ORIENTATION
and V4L2_CID_CAMERA_SENSOR_ROTATION read-only controls used to report
the camera device mounting position and orientation respectively.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add smart amplifier component support, which is designed as another new
type of process component and used for speaker protection algorithm
integration.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200515135958.17511-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The users of v4l2_async_register_fwnode_subdev() have switched to
parsing their endpoints and setting up async sub-device lists in their
notifiers locally, without using the endpoint parsing callbacks. There
are no more users of v4l2_async_register_fwnode_subdev() so this
convenience function can be removed.
This reverts commit 1634f0eded.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7BzV8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg8EH/A2pXMTxtc96RI4S
sttEsUQqbakFS0Z/2tQPpMGr/qW2e5eHgsTX/a3SiUeZiIXk6f4lMFkMuctzBf7p
X77cNEDwGOEdbtCXTsMcmKSde7sP2zCXsPB8xTWLyE6rnaFRgikwwkeqgkIKhp1h
bvOQV0t9HNGvxGAM0iZeOvQAvFl4vd7nS123/MYbir9cugfQUSJRueQ4BiCiJqVE
6cNA7/vFzDJuFGszzIrJ7HXn/IdQMMWHkvTDjgBw0GZw1mDbGFbfbZwOeTz1ojCt
smUQ4tIFxBa/VA5zx7dOy2P2keHbSVf4VLkZRPcceT7OqVS65ETmFDp+qt5NdWM5
vZ8+7/0=
=CyYH
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc6' into objtool/core, to pick up fixes and resolve semantic conflict
Resolve structural conflict between:
59566b0b62: ("x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up")
which introduced a new reference to 'ftrace_epilogue', and:
0298739b79: ("x86,ftrace: Fix ftrace_regs_caller() unwind")
Which renamed it to 'ftrace_caller_end'. Rename the new usage site in the merge commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The interrupt simulator API exposes a lot of custom data structures and
functions and doesn't reuse the interfaces already exposed by the irq
subsystem. This patch tries to address it.
We hide all the simulator-related data structures from users and instead
rely on the well-known irq domain. When creating the interrupt simulator
the user receives a pointer to a newly created irq_domain and can use it
to create mappings for simulated interrupts.
It is also possible to pass a handle to fwnode when creating the simulator
domain and retrieve it using irq_find_matching_fwnode().
The irq_sim_fire() function is dropped as well. Instead we implement the
irq_get/set_irqchip_state interface.
We modify the two modules that use the simulator at the same time as
adding these changes in order to reduce the intermediate bloat that would
result when trying to migrate the drivers in separate patches.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Link: https://lore.kernel.org/r/20200514083901.23445-3-brgl@bgdev.pl
irq_domain_reset_irq_data() doesn't modify the parent data, so it can be
made available even if irq domain hierarchy is not being built. We'll
subsequently use it in irq_sim code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200514083901.23445-2-brgl@bgdev.pl
Add functions to create media links between source and sink subdevices,
based on the fwnode endpoint connections between them:
v4l2_create_fwnode_links_to_pad() - create links from a source subdev to
a single sink pad based on fwnode
endpoint connections.
v4l2_create_fwnode_links() - create all links from a source to sink subdev
based on fwnode endpoint connections.
These functions can be used in a sink's v4l2-async notifier subdev
bound callback to make the links from the bound subdev.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a convenience function that can be used as the .get_fwnode_pad
operation for subdevices that map port numbers and pad indexes 1:1.
The function verifies the endpoint is owned by the subdevice, and if
so returns the endpoint port number.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a missing pointer to the entity in the media_entity operation
get_fwnode_pad. There are no implementers of this op yet, but a future
entity that does so will almost certainly need a reference to itself
to carry out the work.
operation")
Fixes: ae45cd5efc ("[media] media: entity: Add get_fwnode_pad entity
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Currently a GPIO lookup table can only refer to a specific GPIO by a
tuple, consisting of a GPIO controller label and a GPIO offset inside
the controller.
However, a GPIO may also carry a line name, defined by DT or ACPI.
If present, the line name is the most use-centric way to refer to a
GPIO. Hence add support for looking up GPIOs by line name.
Note that there is no guarantee that GPIO line names are globally
unique, so this will use the first match found.
Implement this by reusing the existing gpiod_lookup infrastructure.
Rename gpiod_lookup.chip_label to gpiod_lookup.key, to make it clear
that this field can have two meanings, and update the kerneldoc and
GPIO_LOOKUP*() macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20200511145257.22970-4-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The uverbs layer largely duplicate the code in ib_create_srq(), with the
slight difference that it passes in a udata. Move all the code together
into ib_create_srq_user() and provide an inline for kernel users, similar
to other create calls.
Link: https://lore.kernel.org/r/20200506082444.14502-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
drm_helper_probe_add_cmdline_mode() prefers using a probed mode matching
a video= argument over calculating our own timings for the user specified
mode using CVT or GTF.
But userspace code which is auto-configuring the mode may want to know that
the user has specified that mode on the kernel commandline so that it can
pick that mode over the mode which is marked as DRM_MODE_TYPE_PREFERRED.
This commit sets the DRM_MODE_TYPE_USERDEF flag on the matching mode, just
as we would do on the user-specified mode when no matching probed mode is
found.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221173313.510235-2-hdegoede@redhat.com
Add IORING_OP_TEE implementing tee(2) support. Almost identical to
splice bits, but without offsets.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mptcp calls this from the transmit side, from process context.
Allow a sleeping allocation instead of unconditional GFP_ATOMIC.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a number of USB fixes for 5.7-rc6
The "largest" in here is a bunch of raw-gadget fixes and api changes as
the driver just showed up in -rc1 and work has been done to fix up some
uapi issues found with the original submission, before it shows up in a
-final release.
Other than that, a bunch of other small USB gadget fixes, xhci fixes,
some quirks, andother tiny fixes for reported issues.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXsEF2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynrawCggmWnCKh2vFXUwIkyfDtS2HKm6q0AoMmBH76F
isVpqHKAVOQ+LCDNhV6U
=WzGX
-----END PGP SIGNATURE-----
Merge tag 'usb-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 5.7-rc6
The "largest" in here is a bunch of raw-gadget fixes and api changes
as the driver just showed up in -rc1 and work has been done to fix up
some uapi issues found with the original submission, before it shows
up in a -final release.
Other than that, a bunch of other small USB gadget fixes, xhci fixes,
some quirks, andother tiny fixes for reported issues.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: gadget: fix illegal array access in binding with UDC
usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
USB: usbfs: fix mmap dma mismatch
usb: host: xhci-plat: keep runtime active when removing host
usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
usb: cdns3: gadget: make a bunch of functions static
usb: mtu3: constify struct debugfs_reg32
usb: gadget: udc: atmel: Make some symbols static
usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
usb: raw-gadget: documentation updates
usb: raw-gadget: support stalling/halting/wedging endpoints
usb: raw-gadget: fix gadget endpoint selection
usb: raw-gadget: improve uapi headers comments
usb: typec: mux: intel: Fix DP_HPD_LVL bit field
usb: raw-gadget: fix return value of ep read ioctls
usb: dwc3: select USB_ROLE_SWITCH
usb: gadget: legacy: fix error return code in gncm_bind()
usb: gadget: legacy: fix error return code in cdc_bind()
usb: gadget: legacy: fix redundant initialization warnings
usb: gadget: tegra-xudc: Fix idle suspend/resume
...
stack protector enabled.
-----BEGIN PGP SIGNATURE-----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=5Xi5
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for early boot crashes of kernels built with gcc10 and
stack protector enabled"
* tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix early boot crash on gcc-10, third try
Pull up arch-specific prototype efi_systab_show_arch() in order to
fix a -Wmissing-prototypes warning:
arch/x86/platform/efi/efi.c:957:7: warning: no previous prototype for
‘efi_systab_show_arch’ [-Wmissing-prototypes]
char *efi_systab_show_arch(char *str)
Signed-off-by: Benjamin Thiel <b.thiel@posteo.de>
Link: https://lore.kernel.org/r/20200516132647.14568-1-b.thiel@posteo.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
RFC8684 allows to send 32-bit DATA_ACKs as long as the peer is not
sending 64-bit data-sequence numbers. The 64-bit DSN is only there for
extreme scenarios when a very high throughput subflow is combined with a
long-RTT subflow such that the high-throughput subflow wraps around the
32-bit sequence number space within an RTT of the high-RTT subflow.
It is thus a rare scenario and we should try to use the 32-bit DATA_ACK
instead as long as possible. It allows to reduce the TCP-option overhead
by 4 bytes, thus makes space for an additional SACK-block. It also makes
tcpdumps much easier to read when the DSN and DATA_ACK are both either
32 or 64-bit.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
bugs, mostly for AMD processors. And a few other x86 fixes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6/0xcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOZuwf/bQZw/SP9awLjOOVsRaSWUmwRGD4q
6KVq9+JYsPU4CyJ7P+vdsFF39a0ixoAnKWqRe/vsXdXZrdYCDUuQxh+7X+lmjKAb
dCQBnoqxI0w3yuxrm9Kn6Xs1AGIWibaRlZnXUKbuyn4ecFrh08OfYKGkYsEovhxK
G4ftY4/xyM7Qvm0fq7ZmzxPrkzd74HDZBvB83R6uiyPiX3w4O9qumqkUogcVXIJX
l3mnvSPClDDX4FOr8uhnU93varuR7Bek4Fh+Abj4uNks/F3z9ooJO9Hy9E+V5fhY
g6Oj2IrxDwJ2G6hqyucr1kujukJC1bX2nMZ1O4gNayXsxZEU/JtI0Y26SA==
=EzBt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
snd_hdac_bus_queue_event() and snd_hdac_bus_exec_verb() are used only
internally in HD-audio core. Let's drop the exports and move the
declarations into local.h.
Link: https://lore.kernel.org/r/20200516062854.22141-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
-----BEGIN PGP SIGNATURE-----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=7XEQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc
ARM: tegra: Core changes for v5.8-rc1
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
* tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Create tegra20-cpufreq platform device on Tegra30
ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30
ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
ARM: tegra: Correct PL310 Auxiliary Control Register initialization
ARM: tegra: Do not fully reinitialize L2 on resume
ARM: tegra: Initialize r0 register for firmware wake-up
firmware: tf: Different way of L2 cache enabling after LP2 suspend
firmware: tegra: Make BPMP a regular driver
Link: https://lore.kernel.org/r/20200515145311.1580134-10-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series enables building various Versatile Express platform drivers
as modules. The primary target is the Fast Model FVP which is supported
in Android. As Android is moving towards their GKI, or generic kernel,
the hardware support has to be in modules. Currently ARCH_VEXPRESS
enables several built-in only drivers. Some of these are needed, but
some are only needed for older 32-bit VExpress platforms and can just
be disabled.
-----BEGIN PGP SIGNATURE-----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=c5eS
-----END PGP SIGNATURE-----
Merge tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc
VExpress modularization
This series enables building various Versatile Express platform drivers
as modules. The primary target is the Fast Model FVP which is supported
in Android. As Android is moving towards their GKI, or generic kernel,
the hardware support has to be in modules. Currently ARCH_VEXPRESS
enables several built-in only drivers. Some of these are needed, but
some are only needed for older 32-bit VExpress platforms and can just
be disabled.
* tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ARM: vexpress: Don't select VEXPRESS_CONFIG
bus: vexpress-config: Support building as module
vexpress: Move setting master site to vexpress-config bus
bus: vexpress-config: simplify config bus probing
bus: vexpress-config: Merge vexpress-syscfg into vexpress-config
mfd: vexpress-sysreg: Support building as a module
mfd: vexpress-sysreg: Use devres API variants
mfd: vexpress-sysreg: Drop unused syscon child devices
mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO
clk: vexpress-osc: Support building as a module
clk: vexpress-osc: Use the devres clock API variants
clk: versatile: Only enable SP810 on 32-bit by default
clk: versatile: Rework kconfig structure
amba: Retry adding deferred devices at late_initcall
arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS
ARM: vexpress: Move vexpress_flags_set() into arch code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that the non-DT IM-PD1 support code has been removed, drop the clock
related code from clk-impd1.c.
Link: https://lore.kernel.org/r/20200428204945.21067-1-robh@kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
<linux/parser.h> is missing include guards. Add them.
This is needed to allow declaring a function in <linux/fscrypt.h> that
takes a substring_t parameter.
Link: https://lore.kernel.org/r/20200512233251.118314-2-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
Move the steps to prepare an inet_connection_sock for
forced disposal inside a separate helper. No functional
changes inteded, this will just simplify the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MP_JOIN subflows must not land into the accept queue.
Currently tcp_check_req() calls an mptcp specific helper
to detect such scenario.
Such helper leverages the subflow context to check for
MP_JOIN subflows. We need to deal also with MP JOIN
failures, even when the subflow context is not available
due allocation failure.
A possible solution would be changing the syn_recv_sock()
signature to allow returning a more descriptive action/
error code and deal with that in tcp_check_req().
Since the above need is MPTCP specific, this patch instead
uses a TCP request socket hole to add a MPTCP specific flag.
Such flag is used by the MPTCP syn_recv_sock() to tell
tcp_check_req() how to deal with the request socket.
This change is a no-op for !MPTCP build, and makes the
MPTCP code simpler. It allows also the next patch to deal
correctly with MP JOIN failure.
v1 -> v2:
- be more conservative on drop_req initialization (Mat)
RFC -> v1:
- move the drop_req bit inside tcp_request_sock (Eric)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This new flag should be set/clear from the application to
disable/enable eventfd notifications when a request is completed
and queued to the CQ ring.
Before this patch, notifications were always sent if an eventfd is
registered, so IORING_CQ_EVENTFD_DISABLED is not set during the
initialization.
It will be up to the application to set the flag after initialization
if no notifications are required at the beginning.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds the new 'cq_flags' field that should be written by
the application and read by the kernel.
This new field is available to the userspace application through
'cq_off.flags'.
We are using 4-bytes previously reserved and set to zero. This means
that if the application finds this field to zero, then the new
functionality is not supported.
In the next patch we will introduce the first flag available.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) Fix secid_to_secctx LSM hook default value, from Anders.
2) Fix bug in mmap of bpf array, from Andrii.
3) Restrict bpf_probe_read to archs where they work, from Daniel.
4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The BCM54811 PHY shares many similarities with the already supported BCM54810
PHY but additionally requires some semi-unique configuration.
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 1 day(s) which contain
a total of 67 files changed, 741 insertions(+), 252 deletions(-).
The main changes are:
1) bpf_xdp_adjust_tail() now allows to grow the tail as well, from Jesper.
2) bpftool can probe CONFIG_HZ, from Daniel.
3) CAP_BPF is introduced to isolate user processes that use BPF infra and
to secure BPF networking services by dropping CAP_SYS_ADMIN requirement
in certain cases, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend tcf_action_dump() with boolean argument 'terse' that is used to
request terse-mode action dump. In terse mode only essential data needed to
identify particular action (action kind, cookie, etc.) and its stats is put
to resulting skb and everything else is omitted. Implement
tcf_exts_terse_dump() helper in cls API that is intended to be used to
request terse dump of all exts (actions) attached to the filter.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new TCA_DUMP_FLAGS attribute and use it in cls API to request terse
filter output from classifiers with TCA_DUMP_FLAGS_TERSE flag. This option
is intended to be used to improve performance of TC filter dump when
userland only needs to obtain stats and not the whole classifier/action
data. Extend struct tcf_proto_ops with new terse_dump() callback that must
be defined by supporting classifier implementations.
Support of the options in specific classifiers and actions is
implemented in following patches in the series.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The things look good and calming down; the only change to ALSA core
is the fix for racy rawmidi buffer accesses spotted by syzkaller,
and the rest are all small device-specific quirks for HD-audio and
USB-audio devices.
-----BEGIN PGP SIGNATURE-----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=HlsV
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things look good and calming down; the only change to ALSA core is the
fix for racy rawmidi buffer accesses spotted by syzkaller, and the
rest are all small device-specific quirks for HD-audio and USB-audio
devices"
* tag 'sound-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Limit int mic boost for Thinkpad T530
ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA
ALSA: hda/realtek: Enable headset mic of ASUS UX581LV with ALC295
ALSA: hda/realtek - Enable headset mic of ASUS UX550GE with ALC295
ALSA: hda/realtek - Enable headset mic of ASUS GL503VM with ALC295
ALSA: hda/realtek: Add quirk for Samsung Notebook
ALSA: rawmidi: Fix racy buffer resize under concurrent accesses
ALSA: usb-audio: add mapping for ASRock TRX40 Creator
ALSA: hda/realtek - Fix S3 pop noise on Dell Wyse
Revert "ALSA: hda/realtek: Fix pop noise on ALC225"
ALSA: firewire-lib: fix 'function sizeof not defined' error of tracepoints format
ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset
i915 (two weeks):
- Handle idling during i915_gem_evict_something busy loops (Chris)
- Mark current submissions with a weak-dependency (Chris)
- Propagate error from completed fences (Chris)
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression (Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan)
- Avoid dereferencing a dead context (Chris)
tegra:
- tegra120/4 smmu fixes
amdgpu:
- Clockgating fixes
- Fix fbdev with scatter/gather display
- S4 fix for navi
- Soft recovery for gfx10
- Freesync fixes
- Atomic check cursor fix
- Add a gfxoff quirk
- MST fix
amdkfd:
- Fix GEM reference counting
meson:
- error code propogation fix
-----BEGIN PGP SIGNATURE-----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=b/ek
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As mentioned last week an i915 PR came in late, but I left it, so the
i915 bits of this cover 2 weeks, which is why it's likely a bit larger
than usual.
Otherwise it's mostly amdgpu fixes, one tegra fix, one meson fix.
i915:
- Handle idling during i915_gem_evict_something busy loops (Chris)
- Mark current submissions with a weak-dependency (Chris)
- Propagate error from completed fences (Chris)
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression (Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan)
- Avoid dereferencing a dead context (Chris)
tegra:
- tegra120/4 smmu fixes
amdgpu:
- Clockgating fixes
- Fix fbdev with scatter/gather display
- S4 fix for navi
- Soft recovery for gfx10
- Freesync fixes
- Atomic check cursor fix
- Add a gfxoff quirk
- MST fix
amdkfd:
- Fix GEM reference counting
meson:
- error code propogation fix"
* tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/i915: Handle idling during i915_gem_evict_something busy loops
drm/meson: pm resume add return errno branch
drm/amd/amdgpu: Update update_config() logic
drm/amd/amdgpu: add raven1 part to the gfxoff quirk list
drm/i915: Mark concurrent submissions with a weak-dependency
drm/i915: Propagate error from completed fences
drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest
drm/i915/gvt: Init DPLL/DDI vreg for virtual display instead of inheritance.
drm/amd/display: add basic atomic check for cursor plane
drm/amd/display: Fix vblank and pageflip event handling for FreeSync
drm/amdgpu: implement soft_recovery for gfx10
drm/amdgpu: enable hibernate support on Navi1X
drm/amdgpu: Use GEM obj reference for KFD BOs
drm/amdgpu: force fbdev into vram
drm/amd/powerplay: perform PG ungate prior to CG ungate
drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate
drm/amdgpu: disable MGCG/MGLS also on gfx CG ungate
drm/i915/execlists: Track inflight CCID
drm/i915/execlists: Avoid reusing the same logical CCID
drm/i915/gem: Remove object_is_locked assertion from unpin_from_display_plane
...
This change adds accounting for the memory allocated for shadow stacks.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
This change adds generic support for Clang's Shadow Call Stack,
which uses a shadow stack to protect return addresses from being
overwritten by an attacker. Details are available here:
https://clang.llvm.org/docs/ShadowCallStack.html
Note that security guarantees in the kernel differ from the ones
documented for user space. The kernel must store addresses of
shadow stacks in memory, which means an attacker capable reading
and writing arbitrary memory may be able to locate them and hijack
control flow by modifying the stacks.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[will: Numerous cosmetic changes]
Signed-off-by: Will Deacon <will@kernel.org>
Implement permissions as stated in uapi/linux/capability.h
In order to do that the verifier allow_ptr_leaks flag is split
into four flags and they are set as:
env->allow_ptr_leaks = bpf_allow_ptr_leaks();
env->bypass_spec_v1 = bpf_bypass_spec_v1();
env->bypass_spec_v4 = bpf_bypass_spec_v4();
env->bpf_capable = bpf_capable();
The first three currently equivalent to perfmon_capable(), since leaking kernel
pointers and reading kernel memory via side channel attacks is roughly
equivalent to reading kernel memory with cap_perfmon.
'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and
other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions,
subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the
verifier, run time mitigations in bpf array, and enables indirect variable
access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code
by the verifier.
That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN
will have speculative checks done by the verifier and other spectre mitigation
applied. Such networking BPF program will not be able to leak kernel pointers
and will not be able to access arbitrary kernel memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200513230355.7858-3-alexei.starovoitov@gmail.com
Split BPF operations that are allowed under CAP_SYS_ADMIN into
combination of CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN.
For backward compatibility include them in CAP_SYS_ADMIN as well.
The end result provides simple safety model for applications that use BPF:
- to load tracing program types
BPF_PROG_TYPE_{KPROBE, TRACEPOINT, PERF_EVENT, RAW_TRACEPOINT, etc}
use CAP_BPF and CAP_PERFMON
- to load networking program types
BPF_PROG_TYPE_{SCHED_CLS, XDP, SK_SKB, etc}
use CAP_BPF and CAP_NET_ADMIN
There are few exceptions from this rule:
- bpf_trace_printk() is allowed in networking programs, but it's using
tracing mechanism, hence this helper needs additional CAP_PERFMON
if networking program is using this helper.
- BPF_F_ZERO_SEED flag for hash/lru map is allowed under CAP_SYS_ADMIN only
to discourage production use.
- BPF HW offload is allowed under CAP_SYS_ADMIN.
- bpf_probe_write_user() is allowed under CAP_SYS_ADMIN only.
CAPs are not checked at attach/detach time with two exceptions:
- loading BPF_PROG_TYPE_CGROUP_SKB is allowed for unprivileged users,
hence CAP_NET_ADMIN is required at attach time.
- flow_dissector detach doesn't check prog FD at detach,
hence CAP_NET_ADMIN is required at detach time.
CAP_SYS_ADMIN is required to iterate BPF objects (progs, maps, links) via get_next_id
command and convert them to file descriptor via GET_FD_BY_ID command.
This restriction guarantees that mutliple tasks with CAP_BPF are not able to
affect each other. That leads to clean isolation of tasks. For example:
task A with CAP_BPF and CAP_NET_ADMIN loads and attaches a firewall via bpf_link.
task B with the same capabilities cannot detach that firewall unless
task A explicitly passed link FD to task B via scm_rights or bpffs.
CAP_SYS_ADMIN can still detach/unload everything.
Two networking user apps with CAP_SYS_ADMIN and CAP_NET_ADMIN can
accidentely mess with each other programs and maps.
Two networking user apps with CAP_NET_ADMIN and CAP_BPF cannot affect each other.
CAP_NET_ADMIN + CAP_BPF allows networking programs access only packet data.
Such networking progs cannot access arbitrary kernel memory or leak pointers.
bpftool, bpftrace, bcc tools binaries should NOT be installed with
CAP_BPF and CAP_PERFMON, since unpriv users will be able to read kernel secrets.
But users with these two permissions will be able to use these tracing tools.
CAP_PERFMON is least secure, since it allows kprobes and kernel memory access.
CAP_NET_ADMIN can stop network traffic via iproute2.
CAP_BPF is the safest from security point of view and harmless on its own.
Having CAP_BPF and/or CAP_NET_ADMIN is not enough to write into arbitrary map
and if that map is used by firewall-like bpf prog.
CAP_BPF allows many bpf prog_load commands in parallel. The verifier
may consume large amount of memory and significantly slow down the system.
Existing unprivileged BPF operations are not affected.
In particular unprivileged users are allowed to load socket_filter and cg_skb
program types and to create array, hash, prog_array, map-in-map map types.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200513230355.7858-2-alexei.starovoitov@gmail.com