Commit graph

131,169 commits

Author SHA1 Message Date
Marcel Holtmann
e625e50cee Bluetooth: Introduce debug feature when dynamic debug is disabled
In case dynamic debug is disabled, this feature allows a vendor platform
to provide debug statement printing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11 12:16:27 +02:00
Marcel Holtmann
a10c907ce0 Bluetooth: Add support for experimental features configuration
To enable platform specific experimental features, introduce this new set of
management commands and events.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11 12:13:38 +02:00
Marcel Holtmann
d5cc6626b3 Bluetooth: Introduce HCI_MGMT_HDEV_OPTIONAL option
When setting HCI_MGMT_HDEV_OPTIONAL it is possible to target a specific
conntroller or a global interface.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11 12:13:38 +02:00
Marcel Holtmann
14a81bf021 Bluetooth: replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11 12:13:38 +02:00
Boris Brezillon
ec7cfc3d76 mtd: rawnand: Add a NAND_NO_BBM_QUIRK flag
Some controllers with embedded ECC engines override the BBM marker with
data or ECC bytes, thus making bad block detection through bad block
marker impossible. Let's flag those chips so the core knows it shouldn't
check the BBM and consider all blocks good.

This should allow us to get rid of two implementers of the
legacy.block_bad() hook.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200511064917.6255-1-boris.brezillon@collabora.com
2020-05-11 09:51:43 +02:00
Miquel Raynal
658beb6639 mtd: rawnand: Expose monolithic read/write_page_raw() helpers
The current nand_read/write_page_raw() helpers are already widely used
but do not fit the purpose of "constrained" controllers which cannot,
for instance, separate command/address cycles with data cycles.

Workaround this issue by proposing alternative helpers that can be
used by these controller drivers instead.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-12-miquel.raynal@bootlin.com
2020-05-11 09:51:43 +02:00
Miquel Raynal
b451f5beec mtd: rawnand: Give the possibility to verify a read operation is supported
This can be used to discriminate between two path in the parameter
page detection: use data_in cycles (like before) if supported, use the
CHANGE READ COLUMN command otherwise.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-9-miquel.raynal@bootlin.com
2020-05-11 09:51:42 +02:00
Miquel Raynal
ce8148d7b8 mtd: rawnand: Rename a NAND chip option
NAND controller drivers can set the NAND_USE_BOUNCE_BUFFER flag to a
chip 'option' field. With this flag, the core is responsible of
providing DMA-able buffers.

The current behavior is to not force the use of a bounce buffer when
the core thinks this is not needed. So in the end the name is a bit
misleading, because in theory we will always have a DMA buffer but in
practice it will not always be a bounce buffer.

Rename this flag NAND_USES_DMA to be more accurate.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-4-miquel.raynal@bootlin.com
2020-05-11 09:51:42 +02:00
Miquel Raynal
96d627bdf1 mtd: rawnand: Reorder the nand_chip->options flags
These flags are in a strange order, reorder the list, add spaces when
it is relevant, pack definitions that are related.

There is no functional change.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-3-miquel.raynal@bootlin.com
2020-05-11 09:51:42 +02:00
Miquel Raynal
dd6ed5c989 mtd: rawnand: Translate obscure bitfields into readable macros
Use the BIT() macro instead of defining a 8-digit value.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-2-miquel.raynal@bootlin.com
2020-05-11 09:51:42 +02:00
Boris Brezillon
9e3307a169 mtd: Add support for emulated SLC mode on MLC NANDs
MLC NANDs can be made a bit more reliable if we only program the lower
page of each pair. At least, this solves the paired-pages corruption
issue.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200503155341.16712-5-miquel.raynal@bootlin.com
2020-05-11 09:51:41 +02:00
Miquel Raynal
83c411c29b mtd: rawnand: timings: Add mode information to the timings structure
Convert the timings union into a structure containing the mode and the
actual values. The values are still a union in prevision of the
addition of the NVDDR modes.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200428094302.14624-2-miquel.raynal@bootlin.com
2020-05-11 09:51:40 +02:00
Greg Kroah-Hartman
dd92b0133a Merge 5.7-rc5 into char-misc-next
We want the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-11 09:17:15 +02:00
Greg Kroah-Hartman
c8be6af9ef Merge v5.7-rc5 into driver-core-next
We want the driver core fixes in here and this resolves a merge issue
with drivers/base/dd.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-11 09:00:09 +02:00
Greg Kroah-Hartman
ae73e77848 Merge 5.7-rc5 into staging-next
We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-11 08:57:22 +02:00
Noralf Trønnes
479da1f538 backlight: Add backlight_device_get_by_name()
Add a way to lookup a backlight device based on its name.
Will be used by a USB display gadget getting the name from configfs.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-11 07:39:16 +01:00
Vladimir Oltean
ac02a451a6 net: dsa: sja1105: implement cross-chip bridging operations
sja1105 uses dsa_8021q for DSA tagging, a format which is VLAN at heart
and which is compatible with cascading. A complete description of this
tagging format is in net/dsa/tag_8021q.c, but a quick summary is that
each external-facing port tags incoming frames with a unique pvid, and
this special VLAN is transmitted as tagged towards the inside of the
system, and as untagged towards the exterior. The tag encodes the switch
id and the source port index.

This means that cross-chip bridging for dsa_8021q only entails adding
the dsa_8021q pvids of one switch to the RX filter of the other
switches. Everything else falls naturally into place, as long as the
bottom-end of ports (the leaves in the tree) is comprised exclusively of
dsa_8021q-compatible (i.e. sja1105 switches). Otherwise, there would be
a chance that a front-panel switch transmits a packet tagged with a
dsa_8021q header, header which it wouldn't be able to remove, and which
would hence "leak" out.

The only use case I tested (due to lack of board availability) was when
the sja1105 switches are part of disjoint trees (however, this doesn't
change the fact that multiple sja1105 switches still need unique switch
identifiers in such a system). But in principle, even "true" single-tree
setups (with DSA links) should work just as fine, except for a small
change which I can't test: dsa_towards_port should be used instead of
dsa_upstream_port (I made the assumption that the routing port that any
sja1105 should use towards its neighbours is the CPU port. That might
not hold true in other setups).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 19:52:33 -07:00
Vladimir Oltean
3b7bc1f091 net: dsa: introduce a dsa_switch_find function
Somewhat similar to dsa_tree_find, dsa_switch_find returns a dsa_switch
structure pointer by searching for its tree index and switch index (the
parameters from dsa,member). To be used, for example, by drivers who
implement .crosschip_bridge_join and need a reference to the other
switch indicated to by the tree_index and sw_index arguments.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 19:52:33 -07:00
Vladimir Oltean
f66a6a69f9 net: dsa: permit cross-chip bridging between all trees in the system
One way of utilizing DSA is by cascading switches which do not all have
compatible taggers. Consider the following real-life topology:

      +---------------------------------------------------------------+
      | LS1028A                                                       |
      |               +------------------------------+                |
      |               |      DSA master for Felix    |                |
      |               |(internal ENETC port 2: eno2))|                |
      |  +------------+------------------------------+-------------+  |
      |  | Felix embedded L2 switch                                |  |
      |  |                                                         |  |
      |  | +--------------+   +--------------+   +--------------+  |  |
      |  | |DSA master for|   |DSA master for|   |DSA master for|  |  |
      |  | |  SJA1105 1   |   |  SJA1105 2   |   |  SJA1105 3   |  |  |
      |  | |(Felix port 1)|   |(Felix port 2)|   |(Felix port 3)|  |  |
      +--+-+--------------+---+--------------+---+--------------+--+--+

+-----------------------+ +-----------------------+ +-----------------------+
|   SJA1105 switch 1    | |   SJA1105 switch 2    | |   SJA1105 switch 3    |
+-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+
|sw1p0|sw1p1|sw1p2|sw1p3| |sw2p0|sw2p1|sw2p2|sw2p3| |sw3p0|sw3p1|sw3p2|sw3p3|
+-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+

The above can be described in the device tree as follows (obviously not
complete):

mscc_felix {
	dsa,member = <0 0>;
	ports {
		port@4 {
			ethernet = <&enetc_port2>;
		};
	};
};

sja1105_switch1 {
	dsa,member = <1 1>;
	ports {
		port@4 {
			ethernet = <&mscc_felix_port1>;
		};
	};
};

sja1105_switch2 {
	dsa,member = <2 2>;
	ports {
		port@4 {
			ethernet = <&mscc_felix_port2>;
		};
	};
};

sja1105_switch3 {
	dsa,member = <3 3>;
	ports {
		port@4 {
			ethernet = <&mscc_felix_port3>;
		};
	};
};

Basically we instantiate one DSA switch tree for every hardware switch
in the system, but we still give them globally unique switch IDs (will
come back to that later). Having 3 disjoint switch trees makes the
tagger drivers "just work", because net devices are registered for the
3 Felix DSA master ports, and they are also DSA slave ports to the ENETC
port. So packets received on the ENETC port are stripped of their
stacked DSA tags one by one.

Currently, hardware bridging between ports on the same sja1105 chip is
possible, but switching between sja1105 ports on different chips is
handled by the software bridge. This is fine, but we can do better.

In fact, the dsa_8021q tag used by sja1105 is compatible with cascading.
In other words, a sja1105 switch can correctly parse and route a packet
containing a dsa_8021q tag. So if we could enable hardware bridging on
the Felix DSA master ports, cross-chip bridging could be completely
offloaded.

Such as system would be used as follows:

ip link add dev br0 type bridge && ip link set dev br0 up
for port in sw0p0 sw0p1 sw0p2 sw0p3 \
	    sw1p0 sw1p1 sw1p2 sw1p3 \
	    sw2p0 sw2p1 sw2p2 sw2p3; do
	ip link set dev $port master br0
done

The above makes switching between ports on the same row be performed in
hardware, and between ports on different rows in software. Now assume
the Felix switch ports are called swp0, swp1, swp2. By running the
following extra commands:

ip link add dev br1 type bridge && ip link set dev br1 up
for port in swp0 swp1 swp2; do
	ip link set dev $port master br1
done

the CPU no longer sees packets which traverse sja1105 switch boundaries
and can be forwarded directly by Felix. The br1 bridge would not be used
for any sort of traffic termination.

For this to work, we need to give drivers an opportunity to listen for
bridging events on DSA trees other than their own, and pass that other
tree index as argument. I have made the assumption, for the moment, that
the other existing DSA notifiers don't need to be broadcast to other
trees. That assumption might turn out to be incorrect. But in the
meantime, introduce a dsa_broadcast function, similar in purpose to
dsa_port_notify, which is used only by the bridging notifiers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 19:52:33 -07:00
Vladimir Oltean
9eb8eff0cf net: bridge: allow enslaving some DSA master network devices
Commit 8db0a2ee2c ("net: bridge: reject DSA-enabled master netdevices
as bridge members") added a special check in br_if.c in order to check
for a DSA master network device with a tagging protocol configured. This
was done because back then, such devices, once enslaved in a bridge
would become inoperative and would not pass DSA tagged traffic anymore
due to br_handle_frame returning RX_HANDLER_CONSUMED.

But right now we have valid use cases which do require bridging of DSA
masters. One such example is when the DSA master ports are DSA switch
ports themselves (in a disjoint tree setup). This should be completely
equivalent, functionally speaking, from having multiple DSA switches
hanging off of the ports of a switchdev driver. So we should allow the
enslaving of DSA tagged master network devices.

Instead of the regular br_handle_frame(), install a new function
br_handle_frame_dummy() on these DSA masters, which returns
RX_HANDLER_PASS in order to call into the DSA specific tagging protocol
handlers, and lift the restriction from br_add_if.

Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 19:52:33 -07:00
Gustavo A. R. Silva
b6ca09cb15 net/mlx5: Replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-10 18:05:38 -07:00
Arnd Bergmann
2c407aca64 netfilter: conntrack: avoid gcc-10 zero-length-bounds warning
gcc-10 warns around a suspicious access to an empty struct member:

net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc':
net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds]
 1522 |  memset(&ct->__nfct_init_offset[0], 0,
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from net/netfilter/nf_conntrack_core.c:37:
include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset'
   90 |  u8 __nfct_init_offset[0];
      |     ^~~~~~~~~~~~~~~~~~

The code is correct but a bit unusual. Rework it slightly in a way that
does not trigger the warning, using an empty struct instead of an empty
array. There are probably more elegant ways to do this, but this is the
smallest change.

Fixes: c41884ce05 ("netfilter: conntrack: avoid zeroing timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-10 23:20:24 +02:00
Andrew Lunn
1e2dc14509 net: ethtool: Add helpers for reporting test results
The PHY drivers can use these helpers for reporting the results. The
results get translated into netlink attributes which are added to the
pre-allocated skbuf.

v3:
Poison phydev->skb
Return -EMSGSIZE when ethnl_bcastmsg_put() fails
Return valid error code when nla_nest_start() fails
Use u8 for results
Actually put u32 length into message

v4:
s/ENOTSUPP/EOPNOTSUPP/g

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 12:28:41 -07:00
Andrew Lunn
1dd3f212af net: ethtool: Add infrastructure for reporting cable test results
Provide infrastructure for PHY drivers to report the cable test
results.  A netlink skb is associated to the phydev. Helpers will be
added which can add results to this skb. Once the test has finished
the results are sent to user space.

When netlink ethtool is not part of the kernel configuration stubs are
provided. It is also impossible to trigger a cable test, so the error
code returned by the alloc function is of no consequence.

v2:
Include the status complete in the netlink notification message

v4:
Replace -EINVAL with -EMSGSIZE

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 12:28:41 -07:00
Andrew Lunn
b28efb930b net: ethtool: Add attributes for cable test reports
Add the attributes needed to report cable test results to userspace.
The reports are expected to be per twisted pair. A nested property per
pair can report the result of the cable test. A nested property can
also report the length of the cable to any fault.

v2:
Grammar fixes
Change length from u16 to u32
s/DEV/HEADER/g
Add status attributes
Rename pairs from numbers to letters.

v3:
Fixed example in document
Add ETHTOOL_A_CABLE_NEST_* enum
Add ETHTOOL_MSG_CABLE_TEST_NTF to documentation

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 12:28:41 -07:00
Andrew Lunn
11ca3c4261 net: ethtool: netlink: Add support for triggering a cable test
Add new ethtool netlink calls to trigger the starting of a PHY cable
test.

Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a module when
ETHTOOL_NETLINK is builtin, which would result in kernel linking errors.

v2:
Remove unwanted white space change
Remove ethnl_cable_test_act_ops and use doit handler
Rename cable_test_set_policy cable_test_act_policy
Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY

v3:
Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY from documentation
Remove unused cable_test_get_policy
Add Reviewed-by tags

v4:
Remove unwanted blank line

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 12:28:41 -07:00
Andrew Lunn
97c2243896 net: phy: Add support for polling cable test
Some PHYs are not capable of generating interrupts when a cable test
finished. They do however support interrupts for normal operations,
like link up/down. As such, the PHY state machine would normally not
poll the PHY.

Add support for indicating the PHY state machine must poll the PHY
when performing a cable test.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 12:28:41 -07:00
Andrew Lunn
a68a813836 net: phy: Add cable test support to state machine
Running a cable test is desruptive to normal operation of the PHY and
can take a 5 to 10 seconds to complete. The RTNL lock cannot be held
for this amount of time, and add a new state to the state machine for
running a cable test.

The driver is expected to implement two functions. The first is used
to start a cable test. Once the test has started, it should return.

The second function is called once per second, or on interrupt to
check if the cable test is complete, and to allow the PHY to report
the status.

v2:
Rename phy_cable_test_abort to phy_abort_cable_test
Return different extack when already running test
Use phy_init_hw() to reset the PHY

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 12:27:31 -07:00
Linus Torvalds
0a85ed6e7f block-5.7-2020-05-09
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl63WVAQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpkXWD/9qJgqQpPkigCCwwPHZ+phthw6gHeAgBxPH
 Cw6P9QB4QCdacZjQA6QH3zdxaDsCCitQRioWPgxngs1326TKYNzBi7U3eTEwiK12
 cnRybLnkzei4yzYVUSJk637oOoQh3CiJLvYcJBppGFi7crpbvlQv68M2hu05vhwL
 R/91H62X/5UaUlc1cJV63OBk8euWzF6XNbCQQrR4ayDvz+BsV5Fs72vYa1gx7qIt
 as/67oTT6y4U4pd74nT4OGkxDIXbXfn2eTbh5sMNc4ilBkqMyNbf8aOHdWqXZIBd
 18RKpNl6h/fiDMJ0jsGliReONLjfRBcJla68Kn1AFONMcyxcXidjptOwLOt2fYWf
 YMguCVMhfgxVBslzLWoQ9AWSiNVh36ycORWlCOrnRaOaQCb9OaLZ2fwibfZ0JsMd
 0259Z5vA7MIUoobCc5akXOYHbpByA9FSYkKudgTYLpdjkn05kxQyA12GgJjW3sVw
 ZRjoUuDuZDDUct6JcLWdrlONT8st05g+qf6PCoD+Jac8HtbpqHfKJJUtYecUat75
 4hGKhuvTzpuVY0wNHo3sgqKfsejQODTN6UhejNI11Zs/nx6O0ze/qoDuWZHncnKl
 158le+K5rNS8SUNbDBTMWp3OX4SJm/Gsf30fOWkkt6z1iaEfKc5sCxBHvSOeBEvH
 M9pzy56Vtw==
 =73nU
 -----END PGP SIGNATURE-----

Merge tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - a small series fixing a use-after-free of bdi name (Christoph,Yufen)

 - NVMe fix for a regression with the smaller CQ update (Alexey)

 - NVMe fix for a hang at namespace scanning error recovery (Sagi)

 - fix race with blk-iocost iocg->abs_vdebt updates (Tejun)

* tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block:
  nvme: fix possible hang when ns scanning fails during error recovery
  nvme-pci: fix "slimmer CQ head update"
  bdi: add a ->dev_name field to struct backing_dev_info
  bdi: use bdi_dev_name() to get device name
  bdi: move bdi_dev_name out of line
  vboxsf: don't use the source name in the bdi name
  iocost: protect iocg->abs_vdebt with iocg->waitq.lock
2020-05-10 11:16:07 -07:00
Georgi Djakov
7d374b2090 interconnect: Add helpers for enabling/disabling a path
There is a repeated pattern in multiple drivers where they want to switch
the bandwidth between zero and some other value. This is happening often
in the suspend/resume callbacks. Let's add helper functions to enable and
disable the path, so that callers don't have to take care of remembering
the bandwidth values and handle this in the framework instead.

With this patch the users can call icc_disable() and icc_enable() to lower
their bandwidth request to zero and then restore it back to it's previous
value.

Suggested-by: Evan Green <evgreen@chromium.org>
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10 18:30:37 +03:00
Gustavo A. R. Silva
e7bb7ecefa IB/mlx4: Replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09 20:49:13 -07:00
Matti Vaittinen
5a63b7ba50 power: supply: add battery parameters
Add parsing of new device-tree battery bindings.

     - trickle-charge-current-microamp
     - precharge-upper-limit-microvolt
     - re-charge-voltage-microvolt
     - over-voltage-threshold-microvolt

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10 02:35:49 +02:00
Yonghong Song
492e639f0c bpf: Add bpf_seq_printf and bpf_seq_write helpers
Two helpers bpf_seq_printf and bpf_seq_write, are added for
writing data to the seq_file buffer.

bpf_seq_printf supports common format string flag/width/type
fields so at least I can get identical results for
netlink and ipv6_route targets.

For bpf_seq_printf and bpf_seq_write, return value -EOVERFLOW
specifically indicates a write failure due to overflow, which
means the object will be repeated in the next bpf invocation
if object collection stays the same. Note that if the object
collection is changed, depending how collection traversal is
done, even if the object still in the collection, it may not
be visited.

For bpf_seq_printf, format %s, %p{i,I}{4,6} needs to
read kernel memory. Reading kernel memory may fail in
the following two cases:
  - invalid kernel address, or
  - valid kernel address but requiring a major fault
If reading kernel memory failed, the %s string will be
an empty string and %p{i,I}{4,6} will be all 0.
Not returning error to bpf program is consistent with
what bpf_trace_printk() does for now.

bpf_seq_printf may return -EBUSY meaning that internal percpu
buffer for memory copy of strings or other pointees is
not available. Bpf program can return 1 to indicate it
wants the same object to be repeated. Right now, this should not
happen on no-RT kernels since migrate_disable(), which guards
bpf prog call, calls preempt_disable().

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175914.2476661-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
b121b341e5 bpf: Add PTR_TO_BTF_ID_OR_NULL support
Add bpf_reg_type PTR_TO_BTF_ID_OR_NULL support.
For tracing/iter program, the bpf program context
definition, e.g., for previous bpf_map target, looks like
  struct bpf_iter__bpf_map {
    struct bpf_iter_meta *meta;
    struct bpf_map *map;
  };

The kernel guarantees that meta is not NULL, but
map pointer maybe NULL. The NULL map indicates that all
objects have been traversed, so bpf program can take
proper action, e.g., do final aggregation and/or send
final report to user space.

Add btf_id_or_null_non0_off to prog->aux structure, to
indicate that if the context access offset is not 0,
set to PTR_TO_BTF_ID_OR_NULL instead of PTR_TO_BTF_ID.
This bit is set for tracing/iter program.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175912.2476576-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
138d0be35b net: bpf: Add netlink and ipv6_route bpf_iter targets
This patch added netlink and ipv6_route targets, using
the same seq_ops (except show() and minor changes for stop())
for /proc/net/{netlink,ipv6_route}.

The net namespace for these targets are the current net
namespace at file open stage, similar to
/proc/net/{netlink,ipv6_route} reference counting
the net namespace at seq_file open stage.

Since module is not supported for now, ipv6_route is
supported only if the IPV6 is built-in, i.e., not compiled
as a module. The restriction can be lifted once module
is properly supported for bpf_iter.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175910.2476329-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
6086d29def bpf: Add bpf_map iterator
Implement seq_file operations to traverse all bpf_maps.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175909.2476096-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
e5158d987b bpf: Implement common macros/helpers for target iterators
Macro DEFINE_BPF_ITER_FUNC is implemented so target
can define an init function to capture the BTF type
which represents the target.

The bpf_iter_meta is a structure holding meta data, common
to all targets in the bpf program.

Additional marker functions are called before or after
bpf_seq_read() show()/next()/stop() callback functions
to help calculate precise seq_num and whether call bpf_prog
inside stop().

Two functions, bpf_iter_get_info() and bpf_iter_run_prog(),
are implemented so target can get needed information from
bpf_iter infrastructure and can run the program.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175907.2475956-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
367ec3e483 bpf: Create file bpf iterator
To produce a file bpf iterator, the fd must be
corresponding to a link_fd assocciated with a
trace/iter program. When the pinned file is
opened, a seq_file will be generated.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175906.2475893-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
ac51d99bf8 bpf: Create anonymous bpf iterator
A new bpf command BPF_ITER_CREATE is added.

The anonymous bpf iterator is seq_file based.
The seq_file private data are referenced by targets.
The bpf_iter infrastructure allocated additional space
at seq_file->private before the space used by targets
to store some meta data, e.g.,
  prog:       prog to run
  session_id: an unique id for each opened seq_file
  seq_num:    how many times bpf programs are queried in this session
  done_stop:  an internal state to decide whether bpf program
              should be called in seq_ops->stop() or not

The seq_num will start from 0 for valid objects.
The bpf program may see the same seq_num more than once if
 - seq_file buffer overflow happens and the same object
   is retried by bpf_seq_read(), or
 - the bpf program explicitly requests a retry of the
   same object

Since module is not supported for bpf_iter, all target
registeration happens at __init time, so there is no
need to change bpf_iter_unreg_target() as it is used
mostly in error path of the init function at which time
no bpf iterators have been created yet.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
de4e05cac4 bpf: Support bpf tracing/iter programs for BPF_LINK_CREATE
Given a bpf program, the step to create an anonymous bpf iterator is:
  - create a bpf_iter_link, which combines bpf program and the target.
    In the future, there could be more information recorded in the link.
    A link_fd will be returned to the user space.
  - create an anonymous bpf iterator with the given link_fd.

The bpf_iter_link can be pinned to bpffs mount file system to
create a file based bpf iterator as well.

The benefit to use of bpf_iter_link:
  - using bpf link simplifies design and implementation as bpf link
    is used for other tracing bpf programs.
  - for file based bpf iterator, bpf_iter_link provides a standard
    way to replace underlying bpf programs.
  - for both anonymous and free based iterators, bpf link query
    capability can be leveraged.

The patch added support of tracing/iter programs for BPF_LINK_CREATE.
A new link type BPF_LINK_TYPE_ITER is added to facilitate link
querying. Currently, only prog_id is needed, so there is no
additional in-kernel show_fdinfo() and fill_link_info() hook
is needed for BPF_LINK_TYPE_ITER link.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
15d83c4d7c bpf: Allow loading of a bpf_iter program
A bpf_iter program is a tracing program with attach type
BPF_TRACE_ITER. The load attribute
  attach_btf_id
is used by the verifier against a particular kernel function,
which represents a target, e.g., __bpf_iter__bpf_map
for target bpf_map which is implemented later.

The program return value must be 0 or 1 for now.
  0 : successful, except potential seq_file buffer overflow
      which is handled by seq_file reader.
  1 : request to restart the same object

In the future, other return values may be used for filtering or
teminating the iterator.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175900.2474947-1-yhs@fb.com
2020-05-09 17:05:26 -07:00
Yonghong Song
ae24345da5 bpf: Implement an interface to register bpf_iter targets
The target can call bpf_iter_reg_target() to register itself.
The needed information:
  target:           target name
  seq_ops:          the seq_file operations for the target
  init_seq_private  target callback to initialize seq_priv during file open
  fini_seq_private  target callback to clean up seq_priv during file release
  seq_priv_size:    the private_data size needed by the seq_file
                    operations

The target name represents a target which provides a seq_ops
for iterating objects.

The target can provide two callback functions, init_seq_private
and fini_seq_private, called during file open/release time.
For example, /proc/net/{tcp6, ipv6_route, netlink, ...}, net
name space needs to be setup properly during file open and
released properly during file release.

Function bpf_iter_unreg_target() is also implemented to unregister
a particular target.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175859.2474669-1-yhs@fb.com
2020-05-09 17:05:25 -07:00
Sebastian Reichel
bf584e4dbd lib: Add linear ranges helper library and start using it
Series extracts a "linear ranges" helper out of the regulator
 framework. Linear ranges helper is intended to help converting
 real-world values to register values when conversion is linear. I
 suspect this is useful also for power subsystem and possibly for clk.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl61lKwTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0HxeB/9dblIbC+28MvcEHXCcYBZBouOnrM8E
 bIOMXkgEj1uL78ozOm7tMCgEpaKgv6BHdDuClCBvjbr0uOtAi0qUiv0IBotuVrdo
 lq73l8l7OPz6TFFKIt8WsgwKnzdkuQC08+qrZasAdluRQnqnmkU2tvl2y9zaaaR4
 6hGw+Nwx/pgeCXCa3pu+rCYwA7g0Tf8a6DDC6LyQWZameBJ1ey/YDjhJEeSmY7P7
 306zs8YVxHhQMLUQ5T7DA6r/KWMNkO1SOueCqTjxWZc/XamGEcbsZG1cWrAnkoE2
 VKLXBtYC75coNxIiu8ZxnQwLLdz1EQPdtg0qmzSjXJ68QjbWWzf4K1ra
 =LG9G
 -----END PGP SIGNATURE-----

Merge tag 'tags/linear-ranges-lib' into psy-next

lib: Add linear ranges helper library and start using it

Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges helper is intended to help converting
real-world values to register values when conversion is linear. I
suspect this is useful also for power subsystem and possibly for clk.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10 01:56:03 +02:00
Keith Busch
92decf118f nvme: define constants for identification values
Improve code readability by defining the specification's constants that
the driver is using when decoding identification payloads.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:18:36 -06:00
Chaitanya Kulkarni
d02abd1986 nvmet: align addrfam list to spec
With reference to the NVMeOF Specification (page 44, Figure 38)
discovery log page entry provides address family field. We do set the
transport type field but the adrfam field is not set when using loop
transport and also it doesn't have support in the nvme-cli. So when
reading discovery log page with a loop transport it leads to confusing
output.

As per the spec for adrfam value 254 is reserved for Intra Host
Transport i.e. loopback), we add a required macro in the protocol
header file, set default port disc addr entry's adrfam to
NVMF_ADDR_FAMILY_MAX, and update nvmet_addr_family configfs array for
show/store attribute.

Without this patch, setting adrfam to (ipv4/ipv6/ib/fc/loop/" ") we get
following output for nvme discover command from nvme-cli which is
confusing.
trtype:  loop
adrfam:  ipv4
trtype:  loop
adrfam:  ipv6
trtype:  loop
adrfam:  infiniband
trtype:  loop
adrfam:  fibre-channel
trtype:  loop		# ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam:  pci            # <----- pci for loop
trtype:  loop		# ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = " "
adrfam:  pci            # <----- pci for unrecognized

This patch fixes above output :-
trtype:  loop
adrfam:  ipv4
trtype:  loop
adrfam:  ipv6
trtype:  loop
adrfam:  infiniband
trtype:  loop
adrfam:  fibre-channel
trtype:  loop           # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam:  loop           # <----- loop for loop
trtype:  loop		# ${CFGFS_HOME}/config/nvmet/ports/adrfam = " "
adrfam:  unrecognized   # <----- unrecognized when invalid value

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:18:36 -06:00
James Smart
72e6329f86 nvme-fc and nvmet-fc: revise LLDD api for LS reception and LS request
The current LLDD api has:
  nvme-fc: contains api for transport to do LS requests (and aborts of
    them). However, there is no interface for reception of LS's and sending
    responses for them.
  nvmet-fc: contains api for transport to do reception of LS's and sending
    of responses for them. However, there is no interface for doing LS
    requests.

Revise the api's so that both nvme-fc and nvmet-fc can send LS's, as well
as receiving LS's and sending their responses.

Change name of the rcv_ls_req struct to better reflect generic use as
a context to used to send an ls rsp. Specifically:
  nvmefc_tgt_ls_req -> nvmefc_ls_rsp
  nvmefc_tgt_ls_req.nvmet_fc_private -> nvmefc_ls_rsp.nvme_fc_private

Change nvmet_fc_rcv_ls_req() calling sequence to provide handle that
can be used by transport in later LS request sequences for an association.

nvme-fc nvmet_fc nvme_fcloop:
  Revise to adapt to changed names in api header.
  Change calling sequence to nvmet_fc_rcv_ls_req() for hosthandle.
  Add stubs for new interfaces:
    host/fc.c: nvme_fc_rcv_ls_req()
    target/fc.c: nvmet_fc_invalidate_host()

lpfc:
  Revise to adapt code to changed names in api header.
  Change calling sequence to nvmet_fc_rcv_ls_req() for hosthandle.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:18:33 -06:00
James Smart
615399896c nvme-fc: Sync header to FC-NVME-2 rev 1.08
A couple of minor changes occurred between 1.06 and 1.08:
- Addition of NVME_SR_RSP opcode
- change of SR_RSP status code 1 to Reserved

Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:18:33 -06:00
Christoph Hellwig
1cd925d583 bdi: remove the name field in struct backing_dev_info
The name is only printed for a not registered bdi in writeback.  Use the
device name there as is more useful anyway for the unlike case that the
warning triggers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:15:13 -06:00
Christoph Hellwig
aef33c2ff8 bdi: simplify bdi_alloc
Merge the _node vs normal version and drop the superflous gfp_t argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:15:13 -06:00
Christoph Hellwig
3c5d202b55 bdi: remove bdi_register_owner
Split out a new bdi_set_owner helper to set the owner, and move the policy
for creating the bdi name back into genhd.c, where it belongs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09 16:15:13 -06:00