Later variants of the rkisp1 block use more entries in some arrays:
RKISP1_CIF_ISP_AE_MEAN_MAX 25 -> 81
RKISP1_CIF_ISP_HIST_BIN_N_MAX 16 -> 32
RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES 17 -> 34
RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE 25 -> 81
and we can still extend the uapi during the 5.11-rc cycle, so do that
now to be on the safe side.
V10 and V11 only need the smaller sizes, while V12 and V13 needed
the larger sizes.
When adding the bigger sizes make sure, values filled from hardware
values and transmitted to userspace don't leak kernel data by zeroing
them beforehand.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The IP block evolved from its rk3288/rk3399 base and the vendor
designates them with a numerical version. rk3399 for example
is designated V10 probably meaning V1.0.
There doesn't seem to be an actual version register we could read that
information from, so allow the match_data to carry that information
for future differentiation.
Also carry that information in the hw_revision field of the media-
controller API, so that userspace also has access to that.
The added versions are:
- V10: at least rk3288 + rk3399
- V11: seemingly unused as of now, but probably appeared in some soc
- V12: at least rk3326 + px30
- V13: at least rk1808
[fix checkpatch warning don't use multiple blank lines]
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The uapi right now specifies an array size of 28 but the actual number
of elements is only 25 with the last 3 being unused.
Reduce the array size to the correct number of elements and change
the params code to iterate the array 25 times.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Each entry in the array is a 20 bits value composed of 16 bits unsigned
integer and 4 bits fractional part. So the type should change to __u32.
In addition add a documentation of how the measurements are done.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While the clocks are fairly similar to the H6, many differ in tiny
details, so a separate clock driver seems indicated.
Derived from the H6 clock driver, and adjusted according to the manual.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210127172500.13356-4-andre.przywara@arm.com
Introduce mlx5e_trap which includes a dedicated RQ and NAPI for trapped
packets. Trap-RQ processes packets that were destined to be dropped,
but for debug and visibility sake these packets are trapped and reported
to devlink.
Trap-RQ connects between the HW and the driver and is not a part of a
channel. Open mlx5e_create_rq() and mlx5_core_destroy_rq() as API and
add dedicate RQ handlers which report to devlink of trapped packets.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to allow mlx5 core driver to trigger synchronous operations to
its consumers, add a blocking events handler. Add wrappers to
blocking_notifier_[call_chain/chain_register/chain_unregister]. Add trap
callback for action set and notify about this change. Following patches
in the set add a listener for this event.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add packet trap that can report packets that were dropped due to
destination MAC filtering.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* many minstrel improvements, including removal of the old
minstrel in favour of minstrel_ht
* speed improvements on FQ
* support for RX decapsulation (header conversion) offload
* RTNL reduction: limit RTNL usage in the wireless stack
mostly to where really needed (regulatory not yet) to
reduce contention on it
* various other small updates
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmAR1hoACgkQB8qZga/f
l8QPVRAAjbF502gkrM2+VjC31xNrSVtAXn5LIsTHUUee1Kwhhe7VHNqrSYtR+poQ
jdtBaaszlnkbBqThvIqD6AvbJgUeFhDB9Jcyynhbaq3wPcDiu7IuJikBzkN2Mhyq
bzKu46jFPG6l31ItCKF9mToujlmcJrJVoS5mWJEi3QIWc9B3dwPsznO57tCVznmU
95zkhs6tSwgk9ENpDoulXxvpsnlnIzo8f1z0Lr4h9TbzvwzTEA2+by0hmnBk/vZN
wjBJXNVMlimp+lmgVms/gQfuGG6NHtmtatqsu+iKCRbO5AjOlvvql2pjkf5yNZXP
GD2LkOcM3DiNP1Mf3pP31du1cFBo7nq+P1/ChekmY1A6/xV3GXFsKofGDCSONu1n
E5+X+6MFt1gGHAwh8yxmg2HUjpuq6fApnx656HqlYluXqeCRR0hcv0iJ3j9ApAVJ
Qwn6cP1rjCXXHsbOdGQi/Vx0xmUjEzNw3+j9x5nC5+zM82joRKxFMqZA8revxRUj
gjkiu6EC4ZWWBzTXY9+qITSgEO8b1y7emBgdKSAQplWDAQnaa8nPGBdQ7QmwPdpV
vOSZ6Dd4dMKh8Qk7FWPHxYZJKoDz+i0a8g1m9CogC3TO8hNLRt6D37ffTdoOag2m
648kFBBS4SghKAjH6P4Nf6cfAPHpX/afivnSTpRK691cZ+2pajc=
=gIbl
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2021-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
More updates:
* many minstrel improvements, including removal of the old
minstrel in favour of minstrel_ht
* speed improvements on FQ
* support for RX decapsulation (header conversion) offload
* RTNL reduction: limit RTNL usage in the wireless stack
mostly to where really needed (regulatory not yet) to
reduce contention on it
* tag 'mac80211-next-for-net-next-2021-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (24 commits)
mac80211: minstrel_ht: fix regression in the max_prob_rate fix
virt_wifi: fix deadlock on RTNL
cfg80211: avoid holding the RTNL when calling the driver
cfg80211: change netdev registration/unregistration semantics
mac80211: minstrel_ht: fix rounding error in throughput calculation
mac80211: minstrel_ht: increase stats update interval
mac80211: minstrel_ht: fix max probability rate selection
mac80211: minstrel_ht: improve sample rate selection
mac80211: minstrel_ht: improve ampdu length estimation
mac80211: minstrel_ht: remove old ewma based rate average code
mac80211: remove legacy minstrel rate control
mac80211: minstrel_ht: add support for OFDM rates on non-HT clients
mac80211: minstrel_ht: clean up CCK code
mac80211: introduce aql_enable node in debugfs
cfg80211: Add phyrate conversion support for extended MCS in 60GHz band
cfg80211: add VHT rate entries for MCS-10 and MCS-11
mac80211: reduce peer HE MCS/NSS to own capabilities
mac80211: remove NSS number of 160MHz if not support 160MHz for HE
mac80211_hwsim: add 6GHz channels
mac80211: add LDPC encoding to ieee80211_parse_tx_radiotap
...
====================
Link: https://lore.kernel.org/r/20210127210915.135550-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmARLD8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqdlXB/48nQ5I+Z1wnhPvbtvyH4tk9XSbJaTt
4HH+i3R5RUAzHcOmfm2PQHe9/DxiogOQAFv9Lo0t7HN449bM3LMHrhTCcJIrIRf9
VxFSk4H97wjHR0Zj6TlEe++CTUPUalCpkCluERwqYP9WXRRklXL1mju+WNKnMMl0
9fl4CvQDWjB2wNXXoZ1SVuoFxyeqiKQHJy9n3Wez8sQTIlguOZvm8glDQlyb4v+q
rSxpCUrlpOVv6/11NqxQ7CfGdfTgLUi1a4greriwf1PjEXvDArXMjpDG3bo0kbgy
7Iv0U9GsvtzOPB+6XKxEFeYTKFaixyLugYBAadfvs0lVEIFP1mtlYvQs
=pHI/
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-01-27
The first two patches are by me and fix typos on the CAN gw protocol and the
flexcan driver.
The next patch is by Vincent Mailhol and targets the CAN driver infrastructure,
it exports the function that converts the CAN state into a human readable
string.
A patch by me, which target the CAN driver infrastructure, too, makes the
calculation in can_fd_len2dlc() more readable.
A patch by Tom Rix fixes a checkpatch warning in the mcba_usb driver.
The next seven patches target the mcp251xfd driver. Su Yanjun's patch replaces
several hardcoded assumptions when calling regmap, by using
regmap_get_val_bytes(). The remaining patches are by me. First an open coded
check is replaced by an existing helper function, then in the TX path the
padding for CAN-FD frames is cleaned up. The next two patches clean up the RTR
frame handling in the RX and TX path. Then support for len8_dlc is added. The
last patch adds BQL support.
* tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: mcp251xfd: add BQL support
can: mcp251xfd: add len8_dlc support
can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path
can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path
can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames
can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full
can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap
can: mcba_usb: remove h from printk format specifier
can: length: can_fd_len2dlc(): make legnth calculation readable again
can: dev: export can_get_state_str() function
can: flexcan: fix typos
can: gw: fix typo
====================
Link: https://lore.kernel.org/r/20210127092227.2775573-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port
to the privileged ones (< ip_unprivileged_port_start), but it will
be rejected later on in the __inet_bind or __inet6_bind.
Let's add another return value to indicate that CAP_NET_BIND_SERVICE
check should be ignored. Use the same idea as we currently use
in cgroup/egress where bit #1 indicates CN. Instead, for
cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should
be bypassed.
v5:
- rename flags to be less confusing (Andrey Ignatov)
- rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags
and accept BPF_RET_SET_CN (no behavioral changes)
v4:
- Add missing IPv6 support (Martin KaFai Lau)
v3:
- Update description (Martin KaFai Lau)
- Fix capability restore in selftest (Martin KaFai Lau)
v2:
- Switch to explicit return code (Martin KaFai Lau)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Honor stateful expressions defined in the set from the dynset
extension. The set definition provides a stateful expression
that must be used by the dynset expression in case it is specified.
2) Missing timeout extension in the set element in the dynset
extension leads to inconsistent ruleset listing, not allowing
the user to restore timeout and expiration on ruleset reload.
3) Do not dump the stateful expression from the dynset extension
if it coming from the set definition.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_dynset: dump expressions when set definition contains no expressions
netfilter: nft_dynset: add timeout extension to template
netfilter: nft_dynset: honor stateful expressions in set definition
====================
Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some PMBus chips don't respond with valid data when reading the
CAPABILITY register. Add a flag that device drivers can set so
that the PMBus core driver doesn't use CAPABILITY to determine it's
behavior.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20201222152640.27749-2-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add two new port attributes which make EHT hosts limit configurable and
export the current number of tracked EHT hosts:
- IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT: configure/retrieve current limit
- IFLA_BRPORT_MCAST_EHT_HOSTS_CNT: current number of tracked hosts
Setting IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT to 0 is currently not allowed.
Note that we have to increase RTNL_SLAVE_MAX_TYPE to 38 minimum, I've
increased it to 40 to have space for two more future entries.
v2: move br_multicast_eht_set_hosts_limit() to br_multicast_eht.c,
no functional change
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_psock_destroy() is a RCU callback, I can't see any reason why
it could be used outside.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210127221501.46866-1-xiyou.wangcong@gmail.com
Now that generic_set_encrypted_ci_d_ops() has been added and ext4 and
f2fs are using it, it's no longer necessary to export
generic_ci_d_compare() and generic_ci_d_hash() to filesystems.
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Expand 'compress_algorithm' mount option to accept parameter as format of
<algorithm>:<level>, by this way, it gives a way to allow user to do more
specified config on lz4 and zstd compression level, then f2fs compression
can provide higher compress ratio.
In order to set compress level for lz4 algorithm, it needs to set
CONFIG_LZ4HC_COMPRESS and CONFIG_F2FS_FS_LZ4HC config to enable lz4hc
compress algorithm.
CR and performance number on lz4/lz4hc algorithm:
dd if=enwik9 of=compressed_file conv=fsync
Original blocks: 244382
lz4 lz4hc-9
compressed blocks 170647 163270
compress ratio 69.8% 66.8%
speed 16.4207 s, 60.9 MB/s 26.7299 s, 37.4 MB/s
compress ratio = after / before
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This new function combines the netlink register attribute parser
and the store validation function.
This update requires to replace:
enum nft_registers dreg:8;
in many of the expression private areas otherwise compiler complains
with:
error: cannot take address of bit-field ‘dreg’
when passing the register field as reference.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This new function combines the netlink register attribute parser
and the load validation function.
This update requires to replace:
enum nft_registers sreg:8;
in many of the expression private areas otherwise compiler complains
with:
error: cannot take address of bit-field ‘sreg’
when passing the register field as reference.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently this API uses single 64 bits mask for engines idle indication.
Recently, it was observed that more bits are needed for some ASICs.
This patch modifies the use of the idle mask and the idle_extensions
mask.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For future ASIC support the driver allows user to map certain regions
in the device's configuration space for direct access from userspace.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support completions that arrive directly to the user,
the driver needs to supply the user with the first available msix
interrupt available.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of having it hard-coded as a define, pass it to the user
in runtime.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support the staged submission feature, user must be
allowed to use the same CS sequence for all submissions in the
same staged submission.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The clock API splits its interface into sleepable ant atomic contexts:
- clk_prepare/clk_unprepare for stuff that might sleep
- clk_enable_clk_disable for anything that may be done in atomic context
The code handling runtime PM for clocks only calls clk_disable() on
suspend requests, and clk_enable on resume requests. This means that
runtime PM with clock providers that only have the prepare/unprepare
methods implemented is basically useless.
Many clock implementations can't accommodate atomic contexts. This is
often the case when communication with the clock happens through another
subsystem like I2C or SCMI.
Let's make the clock PM code useful with such clocks by safely invoking
clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when
such clocks are registered with the PM layer then pm_runtime_irq_safe()
can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume()
may be invoked in atomic context.
For clocks that do implement the enable and disable methods then
everything just works as before.
A note on sparse:
According to https://lwn.net/Articles/109066/ there are things
that sparse can't cope with. In particular, pm_clk_op_lock() and
pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on
some runtime condition. To work around that we tell it the lock is
always untaken for the purpose of static analisys.
Thanks to Naresh Kamboju for reporting issues with the initial patch.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have no in tree or out of tree users of this function, remove it and
the header providing its prototype.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Just reuse the block_device and sector from the swap_info structure,
just as used by the SWP_SYNCHRONOUS path. Also remove the checks for
NULL returns from bio_alloc as that can't happen for sleeping
allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point in allocating memory for a synchronous flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_kmalloc shares almost no logic with the bio_set based fast path
in bio_alloc_bioset. Split it into an entirely separate implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The comment says:
/* task_struct member predeclarations (sorted alphabetically): */
So move io_uring_task where it belongs (alphabetically).
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210126193449.487547-1-posk@google.com
The deduplicating sort in sched_init_numa() assumes that the first line in
the distance table contains all unique values in the entire table. I've
been trying to pen what this exactly means for the topology, but it's not
straightforward. For instance, topology.c uses this example:
node 0 1 2 3
0: 10 20 20 30
1: 20 10 20 20
2: 20 20 10 20
3: 30 20 20 10
0 ----- 1
| / |
| / |
| / |
2 ----- 3
Which works out just fine. However, if we swap nodes 0 and 1:
1 ----- 0
| / |
| / |
| / |
2 ----- 3
we get this distance table:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 30
2: 20 20 10 20
3: 20 30 20 10
Which breaks the deduplicating sort (non-representative first line). In
this case this would just be a renumbering exercise, but it so happens that
we can have a deduplicating sort that goes through the whole table in O(n²)
at the extra cost of a temporary memory allocation (i.e. any form of set).
The ACPI spec (SLIT) mentions distances are encoded on 8 bits. Following
this, implement the set as a 256-bits bitmap. Should this not be
satisfactory (i.e. we want to support 32-bit values), then we'll have to go
for some other sparse set implementation.
This has the added benefit of letting us allocate just the right amount of
memory for sched_domains_numa_distance[], rather than an arbitrary
(nr_node_ids + 1).
Note: DT binding equivalent (distance-map) decodes distances as 32-bit
values.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210122123943.1217-2-valentin.schneider@arm.com
acpi_pci_osc_control_set() is only called from pci_root.c, so stop
exporting it and make it static.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is currently little to no information available about the reasons
why a v4l2-async device hasn't probed completely.
Inspired by the "devices_deferred" debugfs file, add a file to list
information about the subdevices that are on waiting lists, for each
notifier.
This is useful to debug v4l2-async subdevices and notifiers, for instance
when doing device bring-up.
For instance, a typical output would be:
$ cat /sys/kernel/debug/video4linux/pending_async_subdevices
ipu1_csi1:
[fwnode] dev=20e0000.iomuxc-gpr:ipu1_csi1_mux, node=/soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux
ipu1_csi0:
[fwnode] dev=20e0000.iomuxc-gpr:ipu1_csi0_mux, node=/soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux
imx6-mipi-csi2:
[fwnode] dev=1-003c, node=/soc/bus@2100000/i2c@21a4000/camera@3c
imx-media:
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Custom/driver-specific v4l2-async match support was introduced
in 2013, as V4L2_ASYNC_BUS_CUSTOM.
This type of match never had any user, so it's fair
to conclude it's not required and that safe for removal.
If the support is ever needed, it can always be restored.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Adding userspace support for the MC (Management Complex) means exporting
an ioctl capable device file representing the root resource container.
This new functionality in the fsl-mc bus driver intends to provide
userspace applications an interface to interact with the MC firmware.
Commands that are composed in userspace are sent to the MC firmware
through the FSL_MC_SEND_MC_COMMAND ioctl. By default the implicit MC
I/O portal is used for this operation, but if the implicit one is busy,
a dynamic portal is allocated and then freed upon execution.
The command received through the ioctl interface is checked against a
known whitelist of accepted MC commands. Commands that attempt a change
in hardware configuration will need CAP_NET_ADMIN, while commands used
in debugging do not need it.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-4-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's often the case that we would write or read a particular field
in register. With the current soc_component apis, reading a particular
field in register would involve first read the register and then
perform shift operations.
Ex:
to read from a field mask of 0xf0
val = snd_soc_component_read(component, reg);
field = ((val & 0xf0) >> 0x4);
This is sometimes prone to errors and code become less readable!
With this new api we could just do
field = snd_soc_component_read_field(component, reg, 0xf0);
this makes it bit simple, easy to write and less error prone!
This also applies to writing!
There are various places in kernel which provides such field interfaces
however soc_component seems to be missing this.
This patch is inspired by FIELD_GET/FIELD_PREP macros in include/linux/bitfield.h
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210126171749.1863-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc1 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210122114358.39299-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch allows io_pgtable_tlb ops could be null since the IOMMU drivers
may use the tlb ops from iommu framework.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-6-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently gather->end is "unsigned long" which may be overflow in
arch32 in the corner case: 0xfff00000 + 0x100000(iova + size).
Although it doesn't affect the size(end - start), it affects the checking
"gather->end < end"
This patch changes this "end" to the real end address
(end = start + size - 1). Correspondingly, update the length to
"end - start + 1".
Fixes: a7d20dc19d ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-5-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
iotlb_sync_map allow IOMMU drivers tlb sync after completing the whole
mapping. This patch adds iova and size as the parameters in it. then the
IOMMU driver could flush tlb with the whole range once after iova mapping
to improve performance.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-3-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Function iommu_dev_has_feature() has never been referenced in the tree,
and there does not appear to be anything coming soon to use it, so delete
it.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1609940111-28563-7-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit c588072bba ("iommu/vt-d: Convert intel iommu driver to the
iommu ops"), function copy_reserved_iova() is not referenced, so delete
it.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1609940111-28563-3-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce mhi_get_free_desc_count() API to return number
of TREs available to queue buffer. MHI clients can use this
API to know before hand if ring is full without calling queue
API.
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1610388462-16322-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
