Commit graph

691,473 commits

Author SHA1 Message Date
Johan Hovold
6313620228 USB: serial: fix softint not being called on errors
Make sure usb_serial_port_softint is called on errors also when using
multi urb writes.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:24:03 -07:00
Johan Hovold
0ae1474367 USB: serial: fix error message on close in generic driver
Resubmitting read urb fails with -EPERM if completion handler runs while
urb is being killed on close. This should not be reported as an error.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:24:02 -07:00
Alan Stern
7152b59259 USB: fix usbfs regression
This patch (as1352) fixes a bug in the way isochronous input data is
returned to userspace for usbfs transfers.  The entire buffer must be
copied, not just the first actual_length bytes, because the individual
packets will be discontiguous if any of them are short.

Reported-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:24:02 -07:00
Jason Wessel
336cee42dd tty_port,usb-console: Fix usb serial console open/close regression
Commit e1108a63e1 ("usb_serial: Use the
shutdown() operation") breaks the ability to use a usb console
starting in 2.6.33.  This was observed when using
console=ttyUSB0,115200 as a boot argument with an FTDI device.  The
error is:

ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22

The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in
tty_port_shutdown() it always clears the flag if it is set.  The fix
is to add a variable to the tty_port struct to indicate when the tty
port is a console.

CC: Alan Cox <alan@linux.intel.com>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:57 -07:00
Tobias Klauser
2314436658 tty: cpm_uart: use resource_size()
Use the resource_size function instead of manually calculating the
resource size.  This reduces the chance of introducing off-by-one errors.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:56 -07:00
Fang Wenqi
d4bee0a677 tty_buffer: Fix distinct type warning
CC      drivers/char/tty_buffer.o
drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_fixed_flag’:
drivers/char/tty_buffer.c:251: warning: comparison of distinct pointer types lacks a cast
drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_flags’:
drivers/char/tty_buffer.c:288: warning: comparison of distinct pointer types lacks a cast

Fix it by replacing min() with min_t() in tty_insert_flip_string_flags and
					  tty_insert_flip_string_fixed_flag().

Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:55 -07:00
Amit Shah
e74d098c66 hvc_console: Fix race between hvc_close and hvc_remove
Alan pointed out a race in the code where hvc_remove is invoked. The
recent virtio_console work is the first user of hvc_remove().

Alan describes it thus:

The hvc_console assumes that a close and remove call can't occur at the
same time.

In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous
itself....

So this can happen

        hvc_close                               hvc_remove
        hung up ? - no
                                                lock
                                                tty = hp->tty
                                                unlock
        lock
        hp->tty = NULL
        unlock
        notify del
        kref_put the hvc struct
        close completes
        tty is destroyed
                                                tty_hangup dead tty
                                                tty->ops will be NULL
                                                NULL->...

This patch adds some tty krefs and also converts to using tty_vhangup().

Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linuxppc-dev@ozlabs.org
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:54 -07:00
David Miller
f157b58511 uartlite: Fix build on sparc.
We can get this driver enabled via MFD_TIMBERDALE which only
requires GPIO to be on.

But the of_address_to_resource() function is only present on
powerpc and microblaze, so we have to conditionalize the
CONFIG_OF probing bits on that.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:54 -07:00
Mel Gorman
352fa6ad16 tty: Take a 256 byte padding into account when buffering below sub-page units
The TTY layer takes some care to ensure that only sub-page allocations
are made with interrupts disabled. It does this by setting a goal of
"TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the
size of tty_buffer into account, it fails to account that tty_buffer_find()
rounds the buffer size out to the next 256 byte boundary before adding on
the size of the tty_buffer.

This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the
size of the tty_buffer and the padding. Once applied, tty_buffer_alloc()
should not require high-order allocations.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:53 -07:00
Greg Kroah-Hartman
87a6aca504 Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
This reverts commit eec9fe7d1a.

Ari writes as the reason this should be reverted:
	The problems with this patch include:
	1. There's at least one subtlety I overlooked - switching
	between X servers (i.e. from one X VT to another) still requires
	the cooperation of both X servers. I was assuming that KMS
	eliminated this.
	2. It hasn't been tested at all (no X server patch exists which
	uses the new mode).

As he was the original author of the patch, I'll revert it.

Cc: Ari Entlich <atrigent@ccs.neu.edu>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:52 -07:00
David Rientjes
12ee3c0a0a driver core: numa: fix BUILD_BUG_ON for node_read_distance
node_read_distance() has a BUILD_BUG_ON() to prevent buffer overruns when
the number of nodes printed will exceed the buffer length.

Each node only needs four chars: three for distance (maximum distance is
255) and one for a seperating space or a trailing newline.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:22 -07:00
Jani Nikula
f0eae0ed3b driver-core: document ERR_PTR() return values
A number of functions in the driver core return ERR_PTR() values on
error. Document this in the kernel-doc of the functions.

Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:21 -07:00
Robert P. J. Day
178a5b35b2 kobject: documentation: Update to refer to kset-example.c.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:20 -07:00
Stephen Rothwell
67fc233f4f sysdev: the cpu probe/release attributes should be sysdev_class_attributes
This fixes these warnings:

drivers/base/cpu.c:264: warning: initialization from incompatible pointer type
drivers/base/cpu.c:265: warning: initialization from incompatible pointer type

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:19 -07:00
Robert P. J. Day
462bd295a3 kobject: documentation: Fix erroneous example in kobject doc.
Replace uio_mem example for kobjects with uio_map, since the uio_mem
struct no longer contains a kobject.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:18 -07:00
Randy Dunlap
e59817bf08 driver-core: fix missing kernel-doc in firmware_class
Fix kernel-doc warning in firmware_class.c:

Warning(drivers/base/firmware_class.c:94): No description found for parameter 'attr'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:16 -07:00
Magnus Damm
4d26e139f0 Driver core: Early platform kernel-doc update
This patch updates the kernel-doc notation for early
platform functions.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:16 -07:00
Greg Kroah-Hartman
3691c964fa sysfs: fix sysfs lockdep warning in mlx4 code
This fixes a sysfs lockdep warning in the mlx4 code.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:15 -07:00
Greg Kroah-Hartman
21e3bde964 sysfs: fix sysfs lockdep warning in infiniband code
This fixes a sysfs lockdep warning in the infiniband code.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:13 -07:00
Greg Kroah-Hartman
c7df670bf7 sysfs: fix sysfs lockdep warning in ipmi code
This fixes a sysfs lockdep warning in the ipmi code.

Thanks to Eric Biederman and Yinghai Lu for the original versions of the
patch, unfortunatly they did not submit them in a form they could be
applied in.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:12 -07:00
Mel Gorman
6757eca348 sysfs: Initialised pci bus legacy_mem field before use
PPC64 is failing to boot the latest mmotm due to an uninitialised pointer in
pci_create_legacy_files(). The surprise is that machines boot at all and it
would appear to affect current mainline as well.  This patch fixes the problem.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:11 -07:00
Jiri Kosina
e1955ca0ee sysfs: use sysfs_bin_attr_init in firmware class driver
Annotate dynamic sysfs attribute in fw_setup_device(). This gets
rid of the following lockdep warning:

bnx2 0000:08:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j6.fw
BUG: key ffff880008293470 not in .data!
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2706 lockdep_init_map+0x562/0x620()
Modules linked in: bnx2(+) sg tpm_bios floppy rtc_lib usb_storage i2c_piix4 joydev button container shpchp i2c_core sr_mod cdrom pci_hotplug usbhid hid ohci_hcd ehci_hcd sd_mod usbcore edd ext3 mbcache jbd fan ata_generic sata_svw pata_serverworks libata scsi_mod thermal processor
Pid: 1915, comm: work_for_cpu Not tainted 2.6.34-rc1-default #81
Call Trace:
 [<ffffffff8107c1d2>] ? lockdep_init_map+0x562/0x620
 [<ffffffff81049fd8>] warn_slowpath_common+0x78/0xd0
 [<ffffffff8104a03f>] warn_slowpath_null+0xf/0x20
 [<ffffffff8107c1d2>] lockdep_init_map+0x562/0x620
 [<ffffffff8117a236>] ? sysfs_new_dirent+0x76/0x120
 [<ffffffff8126edb2>] ? put_device+0x12/0x20
 [<ffffffff811797cc>] sysfs_add_file_mode+0x6c/0xd0
 [<ffffffff8117983c>] sysfs_add_file+0xc/0x10
 [<ffffffff8117bf61>] sysfs_create_bin_file+0x21/0x30
 [<ffffffff81279c61>] _request_firmware+0x2f1/0x650
 [<ffffffff8127a04e>] request_firmware+0xe/0x10
 [<ffffffffa01ec19e>] bnx2_init_one+0x8f5/0x177e [bnx2]
 [<ffffffff81389eab>] ? _raw_spin_unlock_irq+0x2b/0x40
 [<ffffffff81040ed9>] ? finish_task_switch+0x69/0x100
 [<ffffffff81040e70>] ? finish_task_switch+0x0/0x100
 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30
 [<ffffffff811e6302>] local_pci_probe+0x12/0x20
 [<ffffffff81064b53>] do_work_for_cpu+0x13/0x30
 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30
 [<ffffffff81068c56>] kthread+0x96/0xa0
 [<ffffffff81003e64>] kernel_thread_helper+0x4/0x10
 [<ffffffff8138a350>] ? restore_args+0x0/0x30
 [<ffffffff81068bc0>] ? kthread+0x0/0xa0
 [<ffffffff81003e60>] ? kernel_thread_helper+0x0/0x10
---[ end trace a2ecee9c9602d195 ]---

Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:12:10 -07:00
Mark Brown
093208f5d0 ASoC: Hook up microphone jack detection on 1133-EV1 board
Note that since all the microphones share a bias there is a single
jack exported for all three, even though there are two physical
connectors plus the soldered down silicon mic.  Note also that the SiMic
is always present by default.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19 14:09:05 +00:00
Mark Brown
a655b96c24 Merge branch 'topic/jack' into for-2.6.35 2010-03-19 12:48:10 +00:00
Barry Song
698c375666 ASoC: change bf5xx-ad1938 machine driver to bf5xx-ad193x machine driver
Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 12:47:34 +00:00
Mark Brown
cffce322be ASoC: Unexport AD193x bus probe/remove functions
The export is not needed since the per-bus code lives in the same
module.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19 12:22:03 +00:00
Barry Song
a1533d94c6 ASoC: rename ad1938 to ad193x and add support for ad1936/7/8/9
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Yi Li <yi.li@analog.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 12:12:16 +00:00
Misael Lopez Cruz
8ecbabd977 ASoC: TWL6040: Add twl6040 codec driver
Initial version of TWL6040 codec driver.

The TWL6040 codec uses a proprietary PDM-based digital audio interface.
Audio paths supported are:

- Input: Main Mic, Sub Mic, Headset Mic, Auxiliary-FM Left/Right
- Output: Headset Left/Right, Handsfree Left/Right

TWL6040 codec supports power-up/down manual and automatic sequence.
Manual sequence is done through a specific register writes sequence.
Automatic sequence is done when the codec is powered-up through the
external AUDPWRON line. The completion of the sequence is signaled
through the audio interrupt.

TWL6040 codec sysclk can be provided by: low-power or high
performance PLL:

- The low-power PLL takes a low-frequency input at 32,768 Hz and
generates an approximate of 17.64 or 19.2 MHz (for 44.1 KHz and 48 KHz
respectively)

- The high-performance PLL generates an exact 19.2 MHz clock signal
from high-frequency input at 12/19.2/26/38.4 MHz.

Low-power playback mode is a special scenario where only headset path
(headset DAC and driver) is active.

For the particular case of headset path, PLL being used defines the
headset power mode: low-power, high-performance.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:29:33 +00:00
Mark Brown
6937c947d3 ASoC: Bail out of wm_hubs DC servo if calibration fails
We're keeping track of the number of times we've iterated but never
actually using this to bail out if the chip looks stuck.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19 11:17:36 +00:00
Peter Ujfalusi
fdb6b1e195 ASoC: tlv320dac33: Internal clocking changes
During validation of the internal clocking setup it has
been found that the following settings were not configured
in an optimal way:

ASRC_CTRL_A: SRCLKDIV was incorrect, instad of divide ratio 3,
             ratio of 2 has to be used (as the comment stated)
DAC_CTRL_A: Fs = Fsref is the desired configuration instead of
            Fs = Fsref / 1.5

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:17:24 +00:00
Peter Ujfalusi
44f497b4e0 ASoC: tlv320dac33: Fix DSP modes
To make DSP_A mode working correctly the data delay should be
configured to 0. DSP_B mode thus can not be used with DAC33,
so remove it.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:17:24 +00:00
Mark Brown
27648b2f1c ASoC: Correct typoed Mic2 connections on 1133-EV1 board
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:15:42 +00:00
Peter Ujfalusi
299a151f53 ASoC: omap-mcbsp: Add support for Left Justified format
Basic support for Left Justified coding for OMAP McBSP.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:14:39 +00:00
Jorge Eduardo Candelaria
9fc71e8f58 ASoC: McPDM: Use tabs for indentation
Indentation in initial support for McPDM driver was converted to spaces.
Use tabs to comply with open source coding-style.

Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19 11:14:39 +00:00
Kailang Yang
c027ddcd01 ALSA: hda - Add alc_codec_rename() helper
Added alc_codec_rename() helper for renaming codec->chip_name.
Added Acer-specific codec naming for ALC269/662.

[Clean-up and refactoring by tiwai]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:40:53 +01:00
Kailang Yang
da00c24493 ALSA: hda - Add parse customize define function for Realtek codecs
Added alc_auto_parse_customize_define() to parse the Realtek-specific
attributes from SKU.  Also enable beep controls only when the proper
attribute bit is set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:38:53 +01:00
Sascha Hauer
fc300206ad i.MX51: remove NFC AXI static mapping
This area contains the Nand Flash controller registers. There
is no need to map them statically as the Nand driver uses ioremap().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:18:27 +01:00
Sascha Hauer
5443856cad i.MX51: determine silicon revision dynamically
Freescale redboot passes the silicon revision via
ATAG_REVISION. Remove this bootloader dependency by
doing the same as redboot does in the Kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:18:20 +01:00
Kailang Yang
6ff86a3f33 ALSA: hda - Take internal mic as Front Mic
Add new check for MIC. Do the internal DMIC as the Front MIC.
It could solve the default record source index issue.

[Fix the check properly using the bitmask by tiwai]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-19 11:14:36 +01:00
Sascha Hauer
3d1bc8626c i.MX51: map TZIC dynamically
This looks cleaner and allows us to call mx51_revision
later when we can use ioremap to determine the silicon
revision dynamically.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:05:40 +01:00
Sascha Hauer
1b6a2b2d0f i.MX51: Use correct clock for gpt
The gpt uses the ipg clock, not ipg_perclk

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:02:08 +01:00
Justin P. Mattock
b7a5633ab3 fix comment typo in sound/pci/hda/hda_local.h
I think this should be automatic pin instead of ping.
(but could be wrong).

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-19 11:00:58 +01:00
Sascha Hauer
48fae657f0 i.MX51 Babbage: Add uncompress output
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:00:40 +01:00
Greg Thelen
ab5097b11f memcg: fix typo in memcg documentation
Updated memory.txt to be more consistent: s/swapiness/swappiness/

Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-19 10:59:45 +01:00
Lin Ming
40b7e05e17 perf, x86: Fix key indexing in Pentium-4 PMU
Index 0-6 in p4_templates are reserved for common hardware
events. So p4_templates is arranged as below:

    0  -    6:  common hardware events
    7  -    N:  cache events
  N+1  -  ...:  other raw events

Reported-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1268983738.13901.142.camel@minggr.sh.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-19 09:23:17 +01:00
Richard Kennedy
181fdde3b4 block: remove 16 bytes of padding from struct request on 64bits
Remove alignment padding to shrink struct request from 336 to 320 bytes
so needing one fewer cacheline and therefore removing 48 bytes from
struct request_queue.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19 08:58:16 +01:00
Magnus Damm
dec710b77c sh: INTC ioremap support
Extend the INTC code with ioremap() support V2.

Support INTC controllers that are not accessible through
a 1:1 virt:phys window. Needed by SH-Mobile ARM INTCS.

The INTC code behaves as usual if the io window resource
is omitted. The slow phys->virt lookup only happens during
setup. The fast path code operates on virtual addresses.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-19 16:48:01 +09:00
Magnus Damm
01e9651a21 sh: add INTC out of memory error handling
Extend the INTC code to warn and return an error code
in the case of memory allocation failure.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-19 16:45:31 +09:00
Jens Axboe
b4b7a4ef09 Merge branch 'master' into for-linus
Conflicts:
	block/Kconfig

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19 08:05:10 +01:00
Shaohua Li
e9ce335df5 cfq-iosched: fix a kbuild regression
Alex Shi reported a kbuild regression which is about 10% performance lost.
He bisected to this commit: 3dde36ddea.
The reason is cfqq_close() can't find close cooperator. Restoring
cfq_rq_close()'s threshold to original value makes the regression go away.

Since for_preempt parameter isn't used anymore, this patch deletes it.

Reported-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19 08:03:04 +01:00