Commit graph

691,473 commits

Author SHA1 Message Date
Jiri Kosina
f77e347bd4 HID: simplify error handling in hid_input_report()
The handling of failed debugging buffer allocation got overly
complicated. We simply want to skip the debugging code if allocation
fails and go on with event processing.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-18 14:11:53 +01:00
Shane Wang
304a204ec9 crypto: vmac - Fix big-endian support
This patch is to fix the vmac algorithm, add more test cases for vmac,
and fix the test failure on some big endian system like s390.

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-18 20:22:55 +08:00
Patrick McHardy
e8a96f6938 Merge branch 'master' of ../nf-2.6 2010-03-18 12:55:50 +01:00
Guennadi Liakhovetski
da3b062e30 ASoC: SIU driver shall select FW_LOADER
The SIU ASoC driver must load firmware to program the DSP, therefore it
has to select FW_LOADER in its Kconfig entry.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18 11:31:13 +00:00
Barry Song
f4bee1bb00 ASoC: soc-cache: let reg be AND'ed by 0xff instead of data buffer for 8_8 mode
The registers for AD193X are defined as 0x800-0x810 for spi which uses
16_8 mode, for i2c to support AD1937, we will use 8_8 mode, only the low
byte of 0x800-0x810 is valid.  The patch will not destory other codecs,
but make soc cache interface more useful.

Signed-off-by: Barry Song <barry.song@analog.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18 11:23:23 +00:00
Cliff Cai
85dfcdffc2 ASoC: soc-cache: add i2c read entry for 8_8 mode
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Barry Song <barry.song@analog.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18 11:23:15 +00:00
Jiri Kosina
1caea61eda HID: output event in debugfs even if hid_get_report() fails
if hid_get_report() fails for whatever reason, the raw output of
the report doesn't make it into 'events' file in debugfs at all, because
we leave hid_input_report() too soon.

We want the report to be always present for debugging reasons. Move the
code around, so that the event makes it to 'events' file all the time,
even if we are going to discard the report.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-18 12:09:53 +01:00
Jiri Kosina
e07b5d795a hpet: x86_64 and i386 are not different code any more
hpet implementation for x86_64 and i386 is unified. Reflect
this in MAINTAINERS.

Acked-by: Venkatesh Pallipadi <venki@google.com>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-18 10:59:57 +01:00
Tao Ma
1a934c3e57 ocfs2: enable discontig block group support.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-03-18 15:54:22 +08:00
Tao Ma
abf1b3cb5b ocfs2: Set ac_last_group properly with discontig group.
ac_last_group is used to record the last block group we
used during allocation. But the initialization process
only calls ocfs2_which_suballoc_group and fails to
use suballoc_loc properly. So let us do it.
Another function ocfs2_test_suballoc_bit also needs fix.

I have searched all the callers of ocfs2_which_suballoc_group,
and all the callers notices suballoc_loc now.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-27 08:30:36 +08:00
Tao Ma
74380c479a ocfs2: Free block to the right block group.
In case the block we are going to free is allocated from
a discontiguous block group, we have to use suballoc_loc
to be the right group.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-03-22 14:20:18 +08:00
Tao Ma
af2bf0d860 ocfs2: Add ocfs2_gd_is_discontig.
Add ocfs2_gd_is_discontig so that we can test whether
a group descriptor is discontiguous or not.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-05-17 15:14:17 +08:00
Tao Ma
8571882c21 ocfs2: ocfs2_group_bitmap_size has to handle old volume.
ocfs2_group_bitmap_size has to handle the case when the
volume don't have discontiguous block group support. So
pass the feature_incompat in and check it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-13 14:38:06 +08:00
Tao Ma
4711954eaa ocfs2: Some tiny bug fixes for discontiguous block allocation.
The fixes include:
1. some endian problems.
2. we should use bit/bpc in ocfs2_block_group_grow_discontig to
   allocate clusters.
3. set num_clusters properly in __ocfs2_claim_clusters.
4. change name from ocfs2_supports_discontig_bh to
   ocfs2_supports_discontig_bg.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-22 14:09:15 +08:00
Joel Becker
95ec0adf0b ocfs2: Don't relink cluster groups when allocating discontig block groups
We don't have enough credits, and the filesystem is in a full state
anyway.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:10:08 +08:00
Joel Becker
8b06bc592e ocfs2: Grow discontig block groups in one transaction.
Rather than extending the transaction every time we add an extent to a
discontiguous block group, we grab enough credits to fill the extent
list up front.  This means we can free the bits in the same transaction
if we end up not getting enough space.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:09:29 +08:00
Joel Becker
2b6cb576aa ocfs2: Set suballoc_loc on allocated metadata.
Get the suballoc_loc from ocfs2_claim_new_inode() or
ocfs2_claim_metadata().  Store it on the appropriate field of the block
we just allocated.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:09:15 +08:00
Joel Becker
ba2066351b ocfs2: Return allocated metadata blknos on the ocfs2_suballoc_result.
Rather than calculating the resulting block number, return it on the
ocfs2_suballoc_result structure.  This way we can calculate block
numbers for discontiguous block groups.

Cluster groups keep doing it the old way.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:08:59 +08:00
Joel Becker
1ed9b777f7 ocfs2: ocfs2_claim_*() don't need an ocfs2_super argument.
They all take an ocfs2_alloc_context, which has the allocation inode.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-05-06 13:59:06 +08:00
Joel Becker
13e434cf0c ocfs2: Trim suballocations if they cross discontiguous regions
A discontiguous block group can find a range of free bits that straddle
more than one region of its space.  Callers can't handle that, so we
trim the returned bits until they fit within one region.

Only cluster allocations ask for min_bits>1.  Discontiguous block groups
are only for block allocations.  So min_bits doesn't matter here.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:08:27 +08:00
Joel Becker
aa8f8e93c8 ocfs2: ocfs2_claim_suballoc_bits() doesn't need an osb argument.
It's contained on ac->ac_inode->i_sb anyway.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:08:07 +08:00
Joel Becker
9cbc01231e ocfs2: Add suballoc_loc to metadata blocks.
We need a suballoc_loc field on any suballocated block.  Define them.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:07:42 +08:00
Joel Becker
7d1fe093bf ocfs2: Pass suballocation results back via a structure.
We're going to be adding more info to a suballocator allocation.  Rather
than growing every function in the chain, let's pass a result structure
around.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-13 14:30:19 +08:00
Joel Becker
798db35f46 ocfs2: Allocate discontiguous block groups.
If we cannot get a contiguous region for a block group, allocate a
discontiguous one when the filesystem supports it.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-13 14:26:32 +08:00
Joel Becker
4cbe4249d6 ocfs2: Define data structures for discontiguous block groups.
Defines the OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG feature bit and modifies
struct ocfs2_group_desc for the feature.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-04-13 14:26:12 +08:00
Matteo Croce
42c259193e mtd: small typo in Makefile
Cosmetic fix: the path in the Makefile is wrong

Signed-off-by: Matteo Croce <matteo@teknoraver.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-18 07:53:16 +00:00
Rafael J. Wysocki
a034016287 Net / e1000e: Fix build issue introduced by runtime PM patch
The recent PCI runtime PM patch broke build for CONFIG_PM_RUNTIME
and CONFIG_PM_SLEEP undefined.  Fix that by moving the PM callbacks
under suitable #ifdefs.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 23:12:24 -07:00
Paul Mackerras
9eff26ea48 powerpc/perf_events: Fix call-graph recording, add perf_arch_fetch_caller_regs
This implements a powerpc version of perf_arch_fetch_caller_regs
to get correct call-graphs.

It's implemented in assembly because that way we can be sure there isn't
a stack frame for perf_arch_fetch_caller_regs.  If it was in C, gcc might
or might not create a stack frame for it, which would affect the number
of levels we have to skip.

With this, we see results from perf record -e lock:lock_acquire like
this:

 # Samples: 24878
 #
 # Overhead         Command      Shared Object  Symbol
 # ........  ..............  .................  ......
 #
    14.99%            perf  [kernel.kallsyms]  [k] ._raw_spin_lock
                      |
                      --- ._raw_spin_lock
                         |
                         |--25.00%-- .alloc_fd
                         |          (nil)
                         |          |
                         |          |--50.00%-- .anon_inode_getfd
                         |          |          .sys_perf_event_open
                         |          |          syscall_exit
                         |          |          syscall
                         |          |          create_counter
                         |          |          __cmd_record
                         |          |          run_builtin
                         |          |          main
                         |          |          0xfd2e704
                         |          |          0xfd2e8c0
                         |          |          (nil)

... etc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: anton@samba.org
Cc: linuxppc-dev@ozlabs.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100318050513.GA6575@drongo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-18 06:48:29 +01:00
Heiko Carstens
57b552ba0b memory hotplug/s390: set phys_device
Implement arch specific arch_get_memory_phys_device function and
initialize phys_device for each memory section.  That way we finally can
tell which piece of memory belongs to which physical device.

This makes s390's /sys/devices/system/memory/memoryX/phys_device display
the correct thing?

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Heiko Carstens
bc32df0089 memory hotplug: allow setting of phys_device
/sys/devices/system/memory/memoryX/phys_device is supposed to contain the
number of the physical device that the corresponding piece of memory
belongs to.

In case a physical device should be replaced or taken offline for whatever
reason it is necessary to set all corresponding memory pieces offline.
The current implementation always sets phys_device to '0' and there is no
way or hook to change that.  Seems like there was a plan to implement that
but it wasn't finished for whatever reason.

So add a weak function which architectures can override to actually set
the phys_device from within add_memory_block().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Akinobu Mita
e5d6151115 hpet: use for_each_set_bit()
Replace open-coded loop with for_each_set_bit().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Akinobu Mita
c4af96449e ntfs: use bitmap_weight
Use bitmap_weight() instead of doing hweight32() for each u32 element in
the page.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Venkatesh Pallipadi
bcc54e2a6d jffs2: fix up rb_root initializations to use RB_ROOT
jffs2 uses rb_node = NULL; to zero rb_root.

The problem with this is that 17d9ddc72f ("rbtree: Add
support for augmented rbtrees") in the linux-next tree adds a new field
to that struct which needs to be NULL as well.  This patch uses RB_ROOT
as the intializer so all of the relevant fields will be NULL'd.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Eric Paris <eparis@redhat.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
KAMEZAWA Hiroyuki
e9e58a4ec3 memcg: avoid use cmpxchg in swap cgroup maintainance
swap_cgroup uses 2bytes data and uses cmpxchg in a new operation.  2byte
cmpxchg/xchg is not available on some archs.  This patch replaces
cmpxchg/xchg with operations under lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reported-by: Sachin Sant <sachinp@in.ibm.com> wrote:
Acked-by: Balbir Singh <balbir@in.ibm.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Viral Mehta
a8d8980737 kfifo: fix kerneldoc for kfifo_avail and kfifo_in_locked
Function argument is not having "len" anywhere;
"len" is later used in kfifo_{in|out}.

So here, it would be appropriate to say,
it copies @n bytes and not @len

Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-18 01:24:38 +01:00
Clemens Ladisch
8301b91ba0 firewire: ohci: add cycle timer quirk for the TI TSB12LV22
Among the many entries in the TSB12LV22 errata list (TI literature
number SLLS312) is the following:

  PCI Slave reads of the Cycle Timer register may occasionally get an
  incorrect value.
  Software may be able to validate value by reading the register
  multiple times rapidly and evaluating for a reasonable difference.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de> (untested)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added #define)
2010-03-17 23:24:42 +01:00
Venkatesh Pallipadi
9c5fb19adb HPET maintainer email update
Updating my email address in MAINTAINERS.

Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-17 23:16:25 +01:00
Tilman Schmidt
22001a13d0 gigaset: fix build failure
Update the dummy LL interface to the LL interface change
introduced by commit daab433c03c15fd642c71c94eb51bdd3f32602c8.
This fixes the build failure occurring after that commit when
enabling ISDN_DRV_GIGASET but neither ISDN_I4L nor ISDN_CAPI.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17 14:22:07 -07:00
Michael S. Tsirkin
535297a6ae vhost: fix error handling in vring ioctls
Stanse found a locking problem in vhost_set_vring:
several returns from VHOST_SET_VRING_KICK, VHOST_SET_VRING_CALL,
VHOST_SET_VRING_ERR with the vq->mutex held.
Fix these up.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Laurent Chavey <chavey@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-17 23:07:35 +02:00
Dan Carpenter
915a428e43 drm/i915: fix small leak on overlay error path
We should free "params" before returning.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@kernel.org (for .33)
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-17 13:30:15 -07:00
Chris Wilson
1f2b10131f drm/i915: Avoid NULL deref in get_pages() unwind after error.
Fixes:
  http://bugzilla.kernel.org/show_bug.cgi?id=15527
  NULL pointer dereference in i915_gem_object_save_bit_17_swizzle

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<f82b5d2b>] i915_gem_object_save_bit_17_swizzle+0x5b/0xc0 [i915]
Call Trace:
[<f82aea55>] ? i915_gem_object_put_pages+0x125/0x150 [i915]
[<f82aeb71>] ? i915_gem_object_get_pages+0xf1/0x110 [i915]
[<f82b0de8>] ? i915_gem_object_bind_to_gtt+0xb8/0x2a0 [i915]
[<c02db74d>] ? drm_mm_get_block_generic+0x4d/0x180
[<f82b11cd>] ? i915_gem_mmap_gtt_ioctl+0x16d/0x240 [i915]
[<f82ae786>] ? i915_gem_madvise_ioctl+0x86/0x120 [i915]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: maciej.rutecki@gmail.com
Cc: stable@kernel.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-17 13:17:24 -07:00
Zhenyu Wang
59f2d0fc4b drm/i915: Fix check with IS_GEN6
IS_GEN6 missed to include SandyBridge mobile chip, which failed in
i915_probe_agp() for memory config detection. Fix it with a device
info flag.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-17 13:07:00 -07:00
Joe Perches
76e47c30bd drivers/gpu/drm/i915/intel_bios.c: fix continuation line formats
String constants that are continued on subsequent lines with \ will cause
spurious whitespace in the resulting output.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[anholt: whacked it to wrap to 80 columns instead]
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-17 13:06:09 -07:00
Eric Anholt
71cf39b117 drm/i915: Enable VS timer dispatch.
This could resolve HW deadlocks where a unit downstream of the VS is
waiting for more input, the VS has one vertex queued up but not
dispatched because it hopes to get one more vertex for 2x4 dispatch,
and software isn't handing more vertices down because it's waiting for
rendering to complete.  The B-Spec says you should always have this
bit set.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-17 12:59:32 -07:00
Priit Laes
4967790112 drm/i915: Rename FBC_C3_IDLE to FBC_CTL_C3_IDLE to match other registers
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-17 12:59:31 -07:00
Owain G. Ainsworth
5d9391628e drm/i915: remove an unnecessary wait_request()
The continue just after this call with loop around and wait for the
request just added just fine. This leads to slightly more compact code.

Signed-Off-by: Owain G. Ainsworth <oga@openbsd.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-17 12:59:30 -07:00
Eric Anholt
f05dd2f09c drm/i915: Don't bother with the BKL for GEM ioctls.
We probably don't need it for most of the other driver ioctls as well,
but we explicitly did locking when doing the GEM pieces.  On CPU-bound
graphics tasks, the BKL was showing up as 1-2% of CPU time.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-17 12:59:29 -07:00
Shane Huang
5db5b0215a ahci: pp->active_link is not reliable when FBS is enabled
pp->active_link is not reliable when FBS is enabled.
Both PORT_SCR_ACT and PORT_CMD_ISSUE should be checked
because mixed NCQ and non-NCQ commands may be in flight.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-03-17 15:54:55 -04:00
Mark Fasheh
fcefd25ac8 ocfs2: set i_mode on disk during acl operations
ocfs2_set_acl() and ocfs2_init_acl() were setting i_mode on the in-memory
inode, but never setting it on the disk copy. Thus, acls were some times not
getting propagated between nodes. This patch fixes the issue by adding a
helper function ocfs2_acl_set_mode() which does this the right way.
ocfs2_set_acl() and ocfs2_init_acl() are then updated to call
ocfs2_acl_set_mode().

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-17 12:28:22 -07:00
Tao Ma
6527f8f848 ocfs2: Update i_blocks in reflink operations.
In reflink, we need to upate i_blocks for the target inode.

Reported-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-17 12:28:00 -07:00