Commit graph

691,473 commits

Author SHA1 Message Date
Thomas Gleixner
802702e0c2 timer: Try to survive timer callback preempt_count leak
If a timer callback leaks preempt_count we currently assert a
BUG(). That makes it unnecessarily hard to retrieve information about
the problem especially on laptops and headless stations.

There is a decent chance to survive the preempt_count leak by
restoring the preempt_count to the value before the callback. That
allows in many cases to get valuable information about the root cause
of the problem.

We carried that fixup in preempt-rt for years and were able to decode
such wreckage quite a few times.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Veen <arjan@infradead.org>
2010-03-12 22:40:44 +01:00
Thomas Gleixner
576da126a6 timer: Split out timer function call
The ident level is starting to be annoying. More white space than
actual code. Split out the timer function call into its own function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 22:40:43 +01:00
Uwe Kleine-König
06f71b922c timer: Print function name for timer callbacks modifying preemption count
A function scheduled with a timer must not exit with a different
preempt count than it was entered. To make helping users running into
the corresponding BUG() easier also print the name of the bad function
not only its address.

[ tglx: Sanitized printk ]

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: johnstul@us.ibm.com
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 22:40:42 +01:00
John Stultz
64ce4c2f52 time: Clean up warp_clock()
warp_clock() currently accesses timekeeping internal state directly, which
is unnecessary.  Convert it to use the proper timekeeping interfaces.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 22:40:42 +01:00
Stanislaw Gruszka
c28739375b cpu-timers: Avoid iterating over all threads in fastpath_timer_check()
Spread p->sighand->siglock locking scope to make sure that
fastpath_timer_check() never iterates over all threads. Without
locking there is small possibility that signal->cputimer will stop
running while we write values to signal->cputime_expires.

Calling thread_group_cputime() from fastpath_timer_check() is not only
bad because it is slow, also it is racy with __exit_signal() which can
lead to invalid signal->{s,u}time values.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 22:40:41 +01:00
Stanislaw Gruszka
1f169f84d2 cpu-timers: Change SIGEV_NONE timer implementation
When user sets up a timer without associated signal and process does
not use any other cpu timers and does not exit, tsk->signal->cputimer
is enabled and running forever.

Avoid running the timer for no reason.

I used below program to check patch does not break current user space
visible behavior.

 #include <sys/time.h>
 #include <signal.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <time.h>
 #include <unistd.h>
 #include <assert.h>

 void consume_cpu(void)
 {
	int i = 0;
	int count = 0;

	for(i=0; i<100000000; i++)
		count++;
 }

 int main(void)
 {
	int i;
	struct sigaction act;
	struct sigevent evt = { };
	timer_t tid;
	struct itimerspec spec = { };

	evt.sigev_notify = SIGEV_NONE;
	assert(timer_create(CLOCK_PROCESS_CPUTIME_ID, &evt,  &tid) == 0);

	spec.it_value.tv_sec = 10;
	assert(timer_settime(tid, 0, &spec,  NULL) == 0);

	for (i = 0; i < 30; i++) {
		consume_cpu();
		memset(&spec, 0, sizeof(spec));
		assert(timer_gettime(tid, &spec) == 0);
		printf("%lu.%09lu\n",
			(unsigned long) spec.it_value.tv_sec,
			(unsigned long) spec.it_value.tv_nsec);
	}

	assert(timer_delete(tid) == 0);
	return 0;
 }

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 22:40:40 +01:00
Stanislaw Gruszka
ae1a78eecc cpu-timers: Return correct previous timer reload value
According POSIX we need to correctly set old timer it_interval value when
user request that in timer_settime().  Tested using below program.

 #include <sys/time.h>
 #include <signal.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
 #include <unistd.h>
 #include <assert.h>

 int main(void)
 {
	struct sigaction act;
	struct sigevent evt = { };
	timer_t tid;
	struct itimerspec spec, u_spec, k_spec;

	evt.sigev_notify = SIGEV_SIGNAL;
	evt.sigev_signo = SIGPROF;
	assert(timer_create(CLOCK_PROCESS_CPUTIME_ID, &evt,  &tid) == 0);

	spec.it_value.tv_sec = 1;
	spec.it_value.tv_nsec = 2;
	spec.it_interval.tv_sec = 3;
	spec.it_interval.tv_nsec = 4;
	u_spec = spec;
	assert(timer_settime(tid, 0, &spec,  NULL) == 0);

	spec.it_value.tv_sec = 5;
	spec.it_value.tv_nsec = 6;
	spec.it_interval.tv_sec = 7;
	spec.it_interval.tv_nsec = 8;
	assert(timer_settime(tid, 0, &spec,  &k_spec) == 0);

 #define PRT(val) printf(#val ":\t%d/%d\n", (int) u_spec.val, (int) k_spec.val)
	PRT(it_value.tv_sec);
	PRT(it_value.tv_nsec);
	PRT(it_interval.tv_sec);
	PRT(it_interval.tv_nsec);

	return 0;
 }

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 22:40:40 +01:00
Stanislaw Gruszka
5eb9aa6414 cpu-timers: Cleanup arm_timer()
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 22:40:39 +01:00
Stanislaw Gruszka
f55db60904 cpu-timers: Simplify RLIMIT_CPU handling
Let always set signal->cputime_expires expiration cache when setting
new itimer, POSIX 1.b timer, and RLIMIT_CPU.  Since we are
initializing prof_exp expiration cache during fork(), this allows to
remove "RLIMIT_CPU != inf" check from fastpath_timer_check() and do
some other cleanups.

Checked against regression using test cases from:
http://marc.info/?l=linux-kernel&m=123749066504641&w=4
http://marc.info/?l=linux-kernel&m=123811277916642&w=2

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 22:40:39 +01:00
Ingo Molnar
0308635917 Merge branch 'perf/x86' into perf/core
Merge reason: The new P4 driver is stable and ready now for more
              testing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 21:06:37 +01:00
Arnaldo Carvalho de Melo
3997d3776a perf hist: Don't fprintf the callgraph unconditionally
[root@doppio ~]# perf report -i newt.data | head -10
  # Samples: 11999679868
  #
  # Overhead  Command                  Shared Object  Symbol
  # ........  .......  .............................  ......
  #
      63.61%     perf  libslang.so.2.1.4              [.] SLsmg_write_chars
       6.30%     perf  perf                           [.] symbols__find
       2.19%     perf  libnewt.so.0.52.10             [.] newtListboxAppendEntry
       2.08%     perf  libslang.so.2.1.4              [.] SLsmg_write_chars@plt
       1.99%     perf  libc-2.10.2.so                 [.] _IO_vfprintf_internal
  [root@doppio ~]#

Not good, the newt form for report works, but slang has to eat
the cost of the additional callgraph lines everytime it prints a
line, and the callgraph doesn't appear on the screen, so move
the callgraph printing to a separate function and don't use it
in newt.c.

Newt tree widgets are being investigated to properly support
callgraphs, but till that gets merged, lets remove this huge
overhead and show at least the symbol overheads for a callgraph
rich perf.data with good performance.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268408808-13595-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 20:31:53 +01:00
Arnaldo Carvalho de Melo
cb7afb7092 perf newt: Use newtGetScreenSize
For consistency, use the newt API more fully.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268408808-13595-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 20:31:53 +01:00
Arnaldo Carvalho de Melo
7081e087b9 perf newt: Add 'Q', 'q' and Ctrl+C as ways to exit from forms
These are keys people expect when pressed to exit the current
widget, so have associate all of them to this semantic.

Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268401692-9361-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 20:31:52 +01:00
Roland Dreier
0636b33c5f Merge branches 'cxgb3', 'ipoib', 'misc' and 'nes' into for-next 2010-03-12 10:54:20 -08:00
Chien Tung
a72042c08a RDMA/nes: Fix CX4 link problem in back-to-back configuration
Commit 09124e19 ("RDMA/nes: Add support for KR device id 0x0110") took
out too much code and broke CX4 link detection in back-to-back
configuration.  Put back the code that does the link check.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-12 10:54:11 -08:00
Stanislaw Gruszka
15365c108e posix-cpu-timers: Reset expire cache when no timer is running
When a process deletes cpu timer or a timer expires we do not clear
the expiration cache sig->cputimer_expires.

As a result the fastpath_timer_check() which prevents us to loop over
all threads in case no timer is active is not working and we run the
slow path needlessly on every tick.

Zero sig->cputimer_expires in stop_process_timers().

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Spencer Candland <spencer@bluehost.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 19:12:18 +01:00
Andrew Morton
829b6c1ef4 timer stats: Fix del_timer_sync() and try_to_del_timer_sync()
These functions forgot to run timer_stats_timer_clear_start_info().  It's
unobvious what effect this has and whether it matters much - we won't be
printing it out anyway if the timer's detached.

Untested, just an Ingo trollpatch.

[ Nevertheless correct - tglx ]

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: johnstul@us.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 19:11:29 +01:00
Thomas Gleixner
80a05b9ffa clockevents: Sanitize min_delta_ns adjustment and prevent overflows
The current logic which handles clock events programming failures can
increase min_delta_ns unlimited and even can cause overflows.

Sanitize it by:
 - prevent zero increase when min_delta_ns == 1
 - limiting min_delta_ns to a jiffie
 - bail out if the jiffie limit is hit
 - add retries stats for /proc/timer_list so we can gather data

Reported-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-12 19:10:29 +01:00
Andrew Clayton
29b2ee5af5 ARM/OMAP: Remove the +x bit from a couple of source files
Remove the +x bit from a couple of source files

Signed-off-by: Andrew Clayton <andrew@digital-domain.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-12 09:16:09 -08:00
Janusz Krzysztofik
0841cb8268 omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values
The MsBSP register cache will never have any error/status flags set, since
these flags are never written to the reg_cache. So it is kind of not
necessary to clear these flags, which are actually always 0.

In other words, clearing the status/error flags are not necessary, since the
reg_cache will never got these bits set. We can just write back the
register content from the cache as it is when clearing an error condition.

Tested on Amstrad Delta.

Reported-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-12 09:16:09 -08:00
Daniel Mack
23caaf19b1 ALSA: usb-mixer: Add support for Audio Class v2.0
USB Audio Class v2.0 compliant devices have different descriptors and a
different way of setting/getting min/max/res/cur properties. This patch
adds support for them.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12 12:21:26 +01:00
Daniel Mack
99fc86450c ALSA: usb-mixer: parse descriptors with structs
Introduce a number of new structs for mixer, selector, feature and
processing units and some static inline helpers to access fields which
have dynamic offsets. Use them in mixer.c to parse the descriptors. This
is necessary for the upcoming audio v2 parsers.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12 12:21:12 +01:00
Daniel Mack
f0b5e634ff ALSA: usbmixer: rename usbmixer.[ch] -> mixer.[ch]
For clearer namespace, also rename usbmixer_maps.c -> mixer_maps.c

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12 12:20:49 +01:00
Daniel Mack
7b1eda223d ALSA: usb-mixer: factor out quirks
Move all non-standard mixer controls and vendor-specific extensions to a
separate file. Some structs need to be exported now.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12 12:20:26 +01:00
Daniel Mack
45d760567a ALSA: usb-mixer: use defines from audio.h
No need for the private enum.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12 12:20:07 +01:00
Daniel Mack
7e84789403 linux/usb/audio.h: split header
- Split the audio.h file in two to clearly denote the differences
  between the standards.
- Add many more defines to audio-v2.h. Most of them are not currently
  used.
- Replaced a magic value with a proper define

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-12 12:19:49 +01:00
Peter Ujfalusi
75581d2459 ASoC: OMAP3: Report delay caused by the internal FIFO
Use the new delay calback function to report the delay through
ALSA for application caused by the internal FIFO.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:25 +00:00
Peter Ujfalusi
7dc976ed38 OMAP3: McBSP: Add interface for FIFO caused delay query
New functions for querying the FIFO caused delay on both
TX and RX path.
On TX path the return value shows the number of used
locations in the FIFO.
On RX papth it returns the number of locations to be filled
to reach the threshold value (DMA will be triggered to read
the data out from the FIFO).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:25 +00:00
Peter Ujfalusi
eeb309a8a6 ASoC: tlv320dac33: Add option for keeping the BCLK running
Platform data option for the codec to keep the BCLK clock
continuously running in FIFO modes (codec master).

OMAP3 McBSP when in slave mode needs continuous BCLK running
on the serial bus in order to operate correctly.

Since in FIFO mode the DAC33 can also shut down the BCLK clock
and enable it only when it is needed, let the platforms decide
if the CPU side needs the BCLK running or not.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:25 +00:00
Peter Ujfalusi
c3746a07f1 ASoC: tlv320dac33: Start/stop sequence change
To avoid race condition especially in FIFO modes the
sequence for enabling and disabling the codec need to
be changed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:24 +00:00
Miguel Aguilar
aa9b88ee80 DaVinci: DM365: Voice Codec support for the DM365 EVM
The DM365 EVM has two codecs: the Audio Codec (AIC3x) and the Voice Codec,
the idea is to have both enabled in the same kernel simultaneously. However,
the current soc-core doesn't support simultaneous codecs, once that
support will have added, a patch will be posted to enable both codecs in
the DM365 EVM.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:24 +00:00
Miguel Aguilar
b56e972b75 ASoC: DaVinci: CQ93VC Voice Codec
Currently the DM365 is the only SoC that includes this Voice Codec.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:22 +00:00
Miguel Aguilar
e155fcc23c ASoC: DaVinci: Voice Codec Interface
This patch adds the support for the interface needed by the DaVinci
Voice Codec CQ93VC.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:21 +00:00
Miguel Aguilar
ca26308c22 MFD: DaVinci Voice Codec
This is the MFD driver for the DaVinci Voice codec, it has two clients:

* Voice codec interface
* Voice codec CQ93VC

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:21 +00:00
Jassi Brar
d9ad6296ec ASoC: PCM_RATE: Check for KNOT and CONTINUOUS flags
For ASoC, if either CPU or CODEC driver has set the flag, the MACHINE driver
should be given a chance to figure out if the dai, that set the flag, can
accomodate a rate that it does not explicitly specify but is specified
by the dai at the other end of the link.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-12 11:12:20 +00:00
Arnaldo Carvalho de Melo
f9224c5c94 perf report: Implement initial UI using newt
Newt has widespread availability and provides a rather simple
API as can be seen by the size of this patch.

The work needed to support it will benefit other frontends too.

In this initial patch it just checks if the output is a tty, if
not it falls back to the previous behaviour, also if
newt-devel/libnewt-dev is not installed the previous behaviour
is maintaned.

Pressing enter on a symbol will annotate it, ESC in the
annotation window will return to the report symbol list.

More work will be done to remove the special casing in
color_fprintf, stop using fmemopen/FILE in the printing of
hist_entries, etc.

Also the annotation doesn't need to be done via spawning "perf
annotate" and then browsing its output, we can do better by
calling directly the builtin-annotate.c functions, that would
then be moved to tools/perf/util/annotate.c and shared with perf
top, etc

But lets go by baby steps, this patch already improves perf
usability by allowing to quickly do annotations on symbols from
the report screen and provides a first experimentation with
libnewt/TUI integration of tools.

Tested on RHEL5 and Fedora12 X86_64 and on Debian PARISC64 to
browse a perf.data file collected on a Fedora12 x86_64 box.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268349164-5822-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 10:28:46 +01:00
Arnaldo Carvalho de Melo
dd2ee78dd8 perf tools: Add missing bytes printed in hist_entry__fprintf
We need those to properly size the browser widht in the newt
TUI.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268349164-5822-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 10:28:37 +01:00
Arnaldo Carvalho de Melo
b4f5296f0e perf tools: Use eprintf for pr_{err,warning,info} too
Just like we do for pr_debug, so that we can have a single point
where to redirect to the currently used output system, be it
stdio or newt.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268349164-5822-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 10:28:36 +01:00
Arnaldo Carvalho de Melo
895f0edc3c perf top: Export get_window_dimensions
Will be used by the newt code too.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268349164-5822-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 10:28:36 +01:00
Arnaldo Carvalho de Melo
fe2197b8bb perf symbols: Bump plt synthesizing warning debug level
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268349164-5822-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 10:28:36 +01:00
Ingo Molnar
937779db13 Merge branch 'perf/urgent' into perf/core
Merge reason: We want to queue up a dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 10:20:59 +01:00
Jack Steiner
8447b360a3 x86, UV: Fix target_cpus() in x2apic_uv_x.c
target_cpu() should initially target all cpus, not just cpu 0.
Otherwise systems with lots of disks can exhaust the interrupt
vectors on cpu 0 if a large number of disks are discovered
before the irq balancer is running.

Note: UV code only...

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20100311184328.GA21433@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 10:19:29 +01:00
Cyrill Gorcunov
0b861225a5 x86, perf: Fix NULL deref on not assigned x86_pmu
In case of not assigned x86_pmu and software events NULL dereference may
being hit via x86_pmu::schedule_events method.

Fix it by checking if x86_pmu is initialized at all.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100311215016.GG25162@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12 10:18:42 +01:00
Edward Shishkin
f11c9c5c25 vfs: improve writeback_inodes_wb()
Do not pin/unpin superblock for every inode in writeback_inodes_wb(), pin
it for the whole group of inodes which belong to the same superblock and
call writeback_sb_inodes() handler for them.

Signed-off-by: Edward Shishkin <edward.shishkin@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-12 10:03:42 +01:00
Roel Kluin
c12ec0a2d9 paride: fix off-by-one test
With `while (j++ < PX_SPIN)' j reaches PX_SPIN + 1 after the loop.  This
is probably unlikely to produce a problem.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-12 10:03:42 +01:00
Geert Uytterhoeven
8d002bdc9f mfd: Several MFD drivers should depend on GENERIC_HARDIRQS
commit 5fb4d38b19 ("mfd: Move WM831x to
generic IRQ") didn't take into account that genirq support depends on
GENERIC_HARDIRQS.

Additionally, 2.6.34-rc1 added:
  - commit 2afa62ea76 ("mfd: Use genirq in
    88pm860x").
  - commit 760e451878 ("mfd: Convert WM8350 to
    genirq").
  - commit 1f1cf8f98c ("mfd: Update irq handler
    in max8925")

Make all of them depend on GENERIC_HARDIRQS to avoid compile errors on
architectures that don't support genirq yet.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-12 09:09:00 +01:00
Samuel Ortiz
a5300dcbbd mfd: Fix sm501 requested region size
We should only request for the MFD used region, not the whole thing.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
2010-03-12 09:08:59 +01:00
David S. Miller
964ad81cbd ipconfig: Handle devices which take some time to come up.
Some network devices, particularly USB ones, take several seconds to
fully init and appear in the device list.

If the user turned ipconfig on, they are using it for NFS root or some
other early booting purpose.  So it makes no sense to just flat out
fail immediately if the device isn't found.

It also doesn't make sense to just jack up the initial wait to
something crazy like 10 seconds.

Instead, poll immediately, and then periodically once a second,
waiting for a usable device to appear.  Fail after 12 seconds.

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-12 00:00:17 -08:00
Kevin Hilman
aa4b1f6e83 OMAP4: fix temporary hacks that break multi-omap PM
When building for multi-omap, and OMAP4 is enabled, CONFIG_ARCH_OMAP4
will be true and prevent included code from building/running for
OMAP2/3 as well.

This problem exists in io.c where some hwmod/PM/SDRC init code is
prevented from running even on OMAP2/3 when OMAP4 is included in a
multi-OMAP build.

A quick glance suggests that this #ifndef is no longer needed in most
of the cases.  In the remaining cases, the function is wrapped with
"if (cpu_is_omap24xx() || cpu_is_omap34xx())" which will be optimized
out for OMAP4-only builds.

Note that this is only a short-term fix.  Longer-term, OMAP4
needs to create init functions for SDRC and hwmod late-init.

Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-11 15:55:43 -08:00
Kevin Hilman
54c44fb7df OMAP2: cpu_is_omap2*: fix compile-time removal of unused code
Currently if omap2420 is defined but not omap2430, cpu_is_omap2430()
is still defined as a macro, instead of #define'd to zero.  This
results in conditional cpu_is_omap2430() code still being compiled,
and leads to possible compile/link errors.  In particular for hwmod
init.

To fix, add extra #ifdefs to CPU check macros to ensure that the
is_omap* macros are zero for each OMAP2 if they are not configured
into the kernel.

Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-11 15:55:43 -08:00