Commit graph

691,473 commits

Author SHA1 Message Date
Clemens Ladisch
a75d7a4cf5 sound: control: actually allow TLV command access
Creating a control with TLV_COMMAND access was not possible because
snd_ctl_new1() forgot to include it in the mask of allowable access
bits.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-02-01 14:11:52 +01:00
Paul Mundt
b6c58b1d98 sh: Improved multi-resource handling for SH7780 PCI.
The SH7780 PCI controller supports 3 different ranges of PCI memory in
addition to its PCI I/O window. In the case of 29-bit mode, only 2 memory
windows are supported, while in 32-bit mode all 3 are visible. This
attempts to make the resource handling completely dynamic and to permit
platforms to map in as many apertures as they can handle.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-01 20:01:50 +09:00
Steven Whitehouse
ea8d62dadd GFS2: Use GFP_NOFS for alloc structure
This is called under a glock, so its a good plan to use GFP_NOFS

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-02-01 10:01:34 +00:00
Steven Whitehouse
7fe3ec6fe5 GFS2: Fix previous patch
The do_div() call needs to remain.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-02-01 10:00:23 +00:00
Benjamin Marzinski
55f0b4c546 GFS2: Don't withdraw on partial rindex entries
ince gfs2 writes the rindex file a block at a time, and releases the
exclusive lock after each block, it is possible that another process
will grab the lock in the middle of the write.  Since rindex entries are
not an even divisor of blocks, that other process may see partial
entries.  On grows, this is fine.  The process can simply ignore the the
partial entires. Previously, the code withdrew when it saw partial
entries. Now it simply ignores them.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-02-01 09:59:54 +00:00
Gui Jianfeng
bcf4dd4342 blk-cgroup: Fix potential deadlock in blk-cgroup
I triggered a lockdep warning as following.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.33-rc2 #1
-------------------------------------------------------
test_io_control/7357 is trying to acquire lock:
 (blkio_list_lock){+.+...}, at: [<c053a990>] blkiocg_weight_write+0x82/0x9e

but task is already holding lock:
 (&(&blkcg->lock)->rlock){......}, at: [<c053a949>] blkiocg_weight_write+0x3b/0x9e

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&(&blkcg->lock)->rlock){......}:
       [<c04583b7>] validate_chain+0x8bc/0xb9c
       [<c0458dba>] __lock_acquire+0x723/0x789
       [<c0458eb0>] lock_acquire+0x90/0xa7
       [<c0692b0a>] _raw_spin_lock_irqsave+0x27/0x5a
       [<c053a4e1>] blkiocg_add_blkio_group+0x1a/0x6d
       [<c053cac7>] cfq_get_queue+0x225/0x3de
       [<c053eec2>] cfq_set_request+0x217/0x42d
       [<c052c8a6>] elv_set_request+0x17/0x26
       [<c0532a0f>] get_request+0x203/0x2c5
       [<c0532ae9>] get_request_wait+0x18/0x10e
       [<c0533470>] __make_request+0x2ba/0x375
       [<c0531985>] generic_make_request+0x28d/0x30f
       [<c0532da7>] submit_bio+0x8a/0x8f
       [<c04d827a>] submit_bh+0xf0/0x10f
       [<c04d91d2>] ll_rw_block+0xc0/0xf9
       [<f86e9705>] ext3_find_entry+0x319/0x544 [ext3]
       [<f86eae58>] ext3_lookup+0x2c/0xb9 [ext3]
       [<c04c3e1b>] do_lookup+0xd3/0x172
       [<c04c56c8>] link_path_walk+0x5fb/0x95c
       [<c04c5a65>] path_walk+0x3c/0x81
       [<c04c5b63>] do_path_lookup+0x21/0x8a
       [<c04c66cc>] do_filp_open+0xf0/0x978
       [<c04c0c7e>] open_exec+0x1b/0xb7
       [<c04c1436>] do_execve+0xbb/0x266
       [<c04081a9>] sys_execve+0x24/0x4a
       [<c04028a2>] ptregs_execve+0x12/0x18

-> #1 (&(&q->__queue_lock)->rlock){..-.-.}:
       [<c04583b7>] validate_chain+0x8bc/0xb9c
       [<c0458dba>] __lock_acquire+0x723/0x789
       [<c0458eb0>] lock_acquire+0x90/0xa7
       [<c0692b0a>] _raw_spin_lock_irqsave+0x27/0x5a
       [<c053dd2a>] cfq_unlink_blkio_group+0x17/0x41
       [<c053a6eb>] blkiocg_destroy+0x72/0xc7
       [<c0467df0>] cgroup_diput+0x4a/0xb2
       [<c04ca473>] dentry_iput+0x93/0xb7
       [<c04ca4b3>] d_kill+0x1c/0x36
       [<c04cb5c5>] dput+0xf5/0xfe
       [<c04c6084>] do_rmdir+0x95/0xbe
       [<c04c60ec>] sys_rmdir+0x10/0x12
       [<c04027cc>] sysenter_do_call+0x12/0x32

-> #0 (blkio_list_lock){+.+...}:
       [<c0458117>] validate_chain+0x61c/0xb9c
       [<c0458dba>] __lock_acquire+0x723/0x789
       [<c0458eb0>] lock_acquire+0x90/0xa7
       [<c06929fd>] _raw_spin_lock+0x1e/0x4e
       [<c053a990>] blkiocg_weight_write+0x82/0x9e
       [<c0467f1e>] cgroup_file_write+0xc6/0x1c0
       [<c04bd2f3>] vfs_write+0x8c/0x116
       [<c04bd7c6>] sys_write+0x3b/0x60
       [<c04027cc>] sysenter_do_call+0x12/0x32

other info that might help us debug this:

1 lock held by test_io_control/7357:
 #0:  (&(&blkcg->lock)->rlock){......}, at: [<c053a949>] blkiocg_weight_write+0x3b/0x9e
stack backtrace:
Pid: 7357, comm: test_io_control Not tainted 2.6.33-rc2 #1
Call Trace:
 [<c045754f>] print_circular_bug+0x91/0x9d
 [<c0458117>] validate_chain+0x61c/0xb9c
 [<c0458dba>] __lock_acquire+0x723/0x789
 [<c0458eb0>] lock_acquire+0x90/0xa7
 [<c053a990>] ? blkiocg_weight_write+0x82/0x9e
 [<c06929fd>] _raw_spin_lock+0x1e/0x4e
 [<c053a990>] ? blkiocg_weight_write+0x82/0x9e
 [<c053a990>] blkiocg_weight_write+0x82/0x9e
 [<c0467f1e>] cgroup_file_write+0xc6/0x1c0
 [<c0454df5>] ? trace_hardirqs_off+0xb/0xd
 [<c044d93a>] ? cpu_clock+0x2e/0x44
 [<c050e6ec>] ? security_file_permission+0xf/0x11
 [<c04bcdda>] ? rw_verify_area+0x8a/0xad
 [<c0467e58>] ? cgroup_file_write+0x0/0x1c0
 [<c04bd2f3>] vfs_write+0x8c/0x116
 [<c04bd7c6>] sys_write+0x3b/0x60
 [<c04027cc>] sysenter_do_call+0x12/0x32

To prevent deadlock, we should take locks as following sequence:

blkio_list_lock -> queue_lock ->  blkcg_lock.

The following patch should fix this bug.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-01 09:58:54 +01:00
Paul Mundt
ef407beefb sh: Hook up ERR/PERR/SERR detection for SH7780 PCI host controllers.
These were never handled before, so implement some common infrastructure
to support them, then make use of that in the SH7780-specific code. In
practice there is little here that can not be generalized for SH4 parts,
which will be an incremental change as the 7780/7751 code is gradually
unified.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-01 16:39:46 +09:00
David S. Miller
1e98cadb0d Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6 2010-01-31 23:34:58 -08:00
Joe Perches
44298ec0f2 tulip/xircom_cb.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME and xircom_cb from pr_<level>
Convert embedded function names in logging messages to %s, __func__

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:58 -08:00
Joe Perches
a1e37bc5e2 tulip/winbond-840.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Convert %d.%d.%d.%d to %pI4

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:57 -08:00
Joe Perches
e02fb7aa07 tulip/uli526x.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from logging messages
Add do {} while(0) to ULI526X_DBUG macro
Make SHOW_MEDIA_TYPE macro more readable

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:57 -08:00
Joe Perches
27146c43c4 tulip/timer.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:56 -08:00
Joe Perches
22086a1172 tulip/pnic2.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:56 -08:00
Joe Perches
1df8bbd142 tulip/pnic.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:55 -08:00
Joe Perches
fa0b9a4c41 tulip/media.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:55 -08:00
Joe Perches
abe02af826 tulip/interrupt.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:54 -08:00
Joe Perches
e9cd1cbcda tulip/eeprom.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:54 -08:00
Joe Perches
dde7c8ef16 tulip/dmfe.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove 'DRV_NAME ": ' from logging messages
Convert commented out printks to pr_debug

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:53 -08:00
Joe Perches
f639dc7dad tulip/de2104x.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:52 -08:00
Joe Perches
985a63ed3f tulip/21142.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:52 -08:00
Joe Perches
d60bec4eb7 tulip_core: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where appropriate
Convert printks to pr_<level>
Change print formats with %d.dx to %0dx
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-31 23:26:51 -08:00
Jason Wessel
d6ad3e286d softlockup: Add sched_clock_tick() to avoid kernel warning on kgdb resume
When CONFIG_HAVE_UNSTABLE_SCHED_CLOCK is set, sched_clock() gets
the time from hardware such as the TSC on x86. In this
configuration kgdb will report a softlock warning message on
resuming or detaching from a debug session.

Sequence of events in the problem case:

 1) "cpu sched clock" and "hardware time" are at 100 sec prior
    to a call to kgdb_handle_exception()

 2) Debugger waits in kgdb_handle_exception() for 80 sec and on
    exit the following is called ...  touch_softlockup_watchdog() -->
    __raw_get_cpu_var(touch_timestamp) = 0;

 3) "cpu sched clock" = 100s (it was not updated, because the
    interrupt was disabled in kgdb) but the "hardware time" = 180 sec

 4) The first timer interrupt after resuming from
    kgdb_handle_exception updates the watchdog from the "cpu sched clock"

update_process_times() { ...  run_local_timers() -->
softlockup_tick() --> check (touch_timestamp == 0) (it is "YES"
here, we have set "touch_timestamp = 0" at kgdb) -->
__touch_softlockup_watchdog() ***(A)--> reset "touch_timestamp"
to "get_timestamp()" (Here, the "touch_timestamp" will still be
set to 100s.)  ...

    scheduler_tick() ***(B)--> sched_clock_tick() (update "cpu sched
    clock" to "hardware time" = 180s) ...  }

 5) The Second timer interrupt handler appears to have a large
    jump and trips the softlockup warning.

update_process_times() { ...  run_local_timers() -->
softlockup_tick() --> "cpu sched clock" - "touch_timestamp" =
180s-100s > 60s --> printk "soft lockup error messages" ...  }

note: ***(A) reset "touch_timestamp" to
"get_timestamp(this_cpu)"

Why is "touch_timestamp" 100 sec, instead of 180 sec?

When CONFIG_HAVE_UNSTABLE_SCHED_CLOCK is set, the call trace of
get_timestamp() is:

get_timestamp(this_cpu)
 -->cpu_clock(this_cpu)
 -->sched_clock_cpu(this_cpu)
 -->__update_sched_clock(sched_clock_data, now)

The __update_sched_clock() function uses the GTOD tick value to
create a window to normalize the "now" values.  So if "now"
value is too big for sched_clock_data, it will be ignored.

The fix is to invoke sched_clock_tick() to update "cpu sched
clock" in order to recover from this state.  This is done by
introducing the function touch_softlockup_watchdog_sync(). This
allows kgdb to request that the sched clock is updated when the
watchdog thread runs the first time after a resume from kgdb.

[yong.zhang0@gmail.com: Use per cpu instead of an array]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Dongdong Deng <Dongdong.Deng@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: peterz@infradead.org
LKML-Reference: <1264631124-4837-2-git-send-email-jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-01 08:22:32 +01:00
Paul Mundt
bcf39352eb sh: Handle PCI controller resource conflicts.
register_pci_controller() can fail, but presently is a void function.
Change this over to an int so that we can bail early before continuing on
with post-registration initialization (such as throwing the controller in
to 66MHz mode in the case of the SH7780 host controller).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-01 13:11:25 +09:00
Paul Mundt
85b59f5bb2 sh: Enable PCI66 support for SH7780 host controller.
This adds some helper glue for scanning the bus and determining if all
of the devices are 66MHz capable or not before flipping on 66MHz mode.
This isn't quite to spec, but it's fairly consistent with what other
embedded controllers end up having to do.

Scanning code cribbed from the MIPS txx9 PCI code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-01 13:01:42 +09:00
Andreas Schwab
94f28da840 powerpc: TIF_ABI_PENDING bit removal
Here are the powerpc bits to remove TIF_ABI_PENDING now that
set_personality() is called at the appropriate place in exec.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-01 14:00:30 +11:00
Michel Dänzer
17aafccab4 drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
If radeon_cs_parser_init() fails, radeon_cs_ioctl() calls
radeon_cs_parser_fini() with the non-zero error value. The latter dereferenced
parser->ib which hasn't been initialized yet -> boom. Add a test for parser->ib
being non-NULL before dereferencing it.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 12:49:28 +10:00
Thomas Renninger
7779688fc3 ACPI: acpi_bus_{scan,bus,add}: return -ENODEV if no device was found
Callers (acpi_memhotplug.c, dock.c and others) check for the return
value of acpi_bus_add() and assume a valid device was returned in
case zero was returned.

Thus return -ENODEV if no device was found in acpi_bus_scan and
propagate this through acpi_bus_add and acpi_bus_start.

Also remove a confusing comment in acpiphp_glue.c, acpi_bus_scan
will and cannot invoke if acpi_bus_add returns no valid device.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-31 21:43:32 -05:00
Thomas Renninger
d2f6650a95 ACPI: Add NULL pointer check in acpi_bus_start
If acpi_bus_add does not return a device and it's passed
to acpi_bus_start, bad things will happen:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff8128402d>] acpi_bus_start+0x14/0x24
...
[<ffffffffa008977a>] acpiphp_bus_add+0xba/0x130 [acpiphp]
[<ffffffffa008aa72>] enable_device+0x132/0x2ff [acpiphp]
[<ffffffffa0089b68>] acpiphp_enable_slot+0xb8/0x130 [acpiphp]
[<ffffffffa0089df7>] handle_hotplug_event_func+0x87/0x190 [acpiphp]

Next patch would make this NULL pointer check obsolete, but
better having one more than one missing...

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-31 21:43:04 -05:00
Paul Mundt
aee4467b5c sh: Fix up large system memory handling for SH7780 PCI.
For systems that have more than 512MB we need to set up an additional
mapping, this fixes up the rounding to the next power of two and splits
out the mapping accordingly between the two local bus mapping windows.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-01 11:33:22 +09:00
Benjamin Herrenschmidt
bf647fafda powerpc/pseries: Fix xics build without CONFIG_SMP
desc->affinity doesn't exit in that case. Let's use a macro for
the UP variant of get_irq_server(), it's the easiest way, avoids
evaluating arguments.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-01 13:32:41 +11:00
Alberto Panizzo
76cdc083f4 Input: add imx-keypad driver to support the IMX Keypad Port
The IMX family of Application Processors is shipped with a Keypad Port
supported by this driver.

The peripheral can control up to an 8x8 matrix key pad where all the
scanning is done via software.  The hardware provides two interrupts:
one for key presses (KDI) and one for all key releases (KRI). There is
also a simple circuit for glitch reduction (said for synchronization)
made by two series of 3 D-latches clocked by the keypad-clock that
stabilize the interrupts sources. KDI and KRI are fired only if the
respective conditions are maintained for at last 4 keypad-clock cycle.

Since those circuits are poor for a correct debounce process (the
keypad-clock frequency is 32K and bounces longer than 94us are not
masked) the driver, when an interrupt arrives, samples the matrix
with a period of 10ms until the readins are stable for
IMX_KEYPAD_SCANS_FOR_STABILITY times (currently set at 3). After
getting stable result appropriate events are sent through the input
stack.

If some keys are maintained pressed, the driver continues to scan
the matrix with a longer period (60ms) to catch possible multiple
key presses without overloading the cpu. This process ends when all
keys are released.

This driver is tested to build in kernel or as a module and follow
the specification of Freescale Application processors:
i.MX25 i.MX27 i.MX31 i.MX35 i.MX51 especially tested on i.MX31.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-31 17:52:57 -08:00
Dave Airlie
f71d018798 drm/radeon/kms: move radeon KMS on/off switch out of staging.
We are happy enough that the KMS driver is stable enough for enough people
for the kms enable/disable to leave staging. Distros can now contemplate
turning this on.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:35:47 +10:00
Jerome Glisse
ff82f052d2 drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
If an error happen in r600_blit_prepare_copy report it rather
than WARNING and keeping execution. For instance if ib allocation
failed we did just warn about but then latter tried to access
NULL ib ptr causing oops. This patch also protect r600_copy_blit
with a mutex as otherwise one process might overwrite blit temporary
data with new one possibly leading to GPU lockup.

Should partialy or totaly fix:
https://bugzilla.redhat.com/show_bug.cgi?id=553279

V2 failing blit initialization is not fatal, fallback to memcpy when
this happen
V3 init blit before startup as we pin in startup, remove duplicate
code (this one was actualy tested unlike V2)

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:33:11 +10:00
Jakob Bornecrantz
5ffdb658f6 drm/vmwgfx: Don't send bad flags to the host
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:29:59 +10:00
Peter Hanzel
c188660f6d drm/vmwgfx: Request SVGA version 2 and bail if not found
This fixes the driver not loading on older versions of VMware.

Signed-off-by: Peter Hanzel <hanzelpeter@gmail.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:29:31 +10:00
Jakob Bornecrantz
8e19a95177 drm/vmwgfx: Correctly detect 3D
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:29:03 +10:00
Austin Yuan
110b20c3dd drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c
Signed-off-by: Austin Yuan <shengquan.yuan@gmail.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:27:25 +10:00
Marcin Kościelnicki
fa5829b365 drm/kms: Remove incorrect comment in struct drm_mode_modeinfo
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:26:39 +10:00
Richard Kennedy
dd5fde6041 drm/ttm: remove padding from ttm_ref_object on 64bit builds
Re-order structure ttm_ref_object to remove 8 bytes of alignment padding
on 64 bit builds, so shrinking its size from 72 to 64 bytes allowing it
to fit into a smaller slab.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:24:50 +10:00
Dave Airlie
4b866288be drm/radeon/kms: release agp on error.
if we get an error, release the AGP if we've acquired it already.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:22:10 +10:00
John Kacur
2dea2e29b9 drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info
First call drm_agp_acquire to check if agp has been acquired.
Second call drm_agp_info to fill in the info data struct, including aper_size.
Finally do the check to see if the aper_size makes sense.

Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:19:31 +10:00
John Kacur
cdb6e375c3 drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
- Fix warning by using %zu instead of %d for size_t
- Fix spelling mistake, "to" should be "too".

Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:19:08 +10:00
Francisco Jerez
db78e27de7 drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching.
Fixes errors like:
> reserve_ram_pages_type failed 0x15b7a000-0x15b7b000, track 0x8, req 0x10
when a BO is moved between WC and UC areas.

Reported-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:15:37 +10:00
Dave Airlie
f28cf33945 drm/kms/radeon: pick digitial encoders smarter. (v3)
booting a Lenovo W500 with LVDS + DP outputs showed up a TODO we had
on our list, to pick a correct digital encoder block. The LVTMA
encoder requires the second digital encoder, all others can use any
encoder at all.

This fixes the digital encoder selection logic to enable LVDS/DP combos
to work okay.

V2: fix silly addition of connector dig_block and cleanup the other
places in the code that pick the encoder.

V3: rename to dig_encoder and clean up further - also fix
the picking algorithm.

tested on Lenovo W500 + desktop 3650 cards.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 10:13:15 +10:00
Dave Airlie
43c33ed87d drm/radeon/kms: use active device to pick connector for encoder
On the W500 we have UNIPHY routed to both DVI and DP, this seems
to always pick the DVI connector which means link training fails.

Switch to using active device to pick the connector, this seems
like it should be safe from a code review, and it fixes things
a bit more here.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 10:12:26 +10:00
Dave Airlie
97b94ccb9a drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.
This makes displayport work again here.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 10:12:17 +10:00
Takashi Iwai
f3f1e14ce9 Merge branch 'fix/asoc' into for-linus 2010-01-31 14:41:05 +01:00
Takashi Iwai
74ce25c0ee Merge branch 'fix/hda' into for-linus 2010-01-31 14:40:58 +01:00
Ingo Molnar
59f411b62c perf lock: Clean up various details
Fix up a few small stylistic details:

 - use consistent vertical spacing/alignment
 - remove line80 artifacts
 - group some global variables better
 - remove dead code

Plus rename 'prof' to 'report' to make it more in line with other
tools, and remove the line/file keying as we really want to use
IPs like the other tools do.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31 09:08:27 +01:00
Hitoshi Mitake
9b5e350c7a perf lock: Introduce new tool "perf lock", for analyzing lock statistics
Adding new subcommand "perf lock" to perf.

I have a lot of remaining ToDos, but for now perf lock can
already provide minimal functionality for analyzing lock
statistics.

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31 09:08:26 +01:00