Commit graph

691,473 commits

Author SHA1 Message Date
Darrick J. Wong
c15ade6578 lm85: fix the version check that broke adt7468 probing
The verstep check in the lm85 driver fails because the upper nibble of
the version register is 0x7, not 0x6, on the adt7468 chip.  Probing of
all adt7468s was broken by 69fc1feba2
("hwmon: (lm85) Rework the device detection"), and this patch fixes
that.  Also add in a missing i2c_device_id that accidentally got dropped
from the original patch.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10 15:55:10 -07:00
Randy Dunlap
b943c460ff menu: fix embedded menu snafu
The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in
the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED menu.
Fix by moving it to just after all of the EMBEDDED menu symbols.  Also,
ANON_INODES has a similar problem, so move it to just above the EMBEDDED
menu items since it is used in the EMBEDDED menu.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10 15:55:10 -07:00
Roel Kluin
4750498099 mm: get_nid_for_pfn() returns int
get_nid_for_pfn() returns int

Presumably the (nid < 0) case has never happened.

We do know that it is happening on one system while creating a symlink for
a memory section so it should also happen on the same system if
unregister_mem_sect_under_nodes() were called to remove the same symlink.

The test was actually added in response to a problem with an earlier
version reported by Yasunori Goto where one or more of the leading pages
of a memory section on the 2nd node of one of his systems was
uninitialized because I believe they coincided with a memory hole.

That earlier version did not ignore uninitialized pages and determined
the nid by considering only the 1st page of each memory section.  This
caused the symlink to the 1st memory section on the 2nd node to be
incorrectly created in /sys/devices/system/node/node0 instead of
/sys/devices/system/node/node1.  The problem was fixed by adding the
test to skip over uninitialized pages.

I suspect we have not seen any reports of the non-removal
of a symlink due to the incorrect declaration of the nid
variable in unregister_mem_sect_under_nodes() because
  - systems where a memory section could have an uninitialized
    range of leading pages are probably rare.
  - memory remove is probably not done very frequently on the
    systems that are capable of demonstrating the problem.
  - lingering symlink(s) that should have been removed may
    have simply gone unnoticed.

[garyhade@us.ibm.com: wrote changelog]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10 15:55:10 -07:00
Eric Sandeen
395a87bfef ext4: fix header check in ext4_ext_search_right() for deep extent trees.
The ext4_ext_search_right() function is confusing; it uses a
"depth" variable which is 0 at the root and maximum at the leaves, 
but the on-disk metadata uses a "depth" (actually eh_depth) which
is opposite: maximum at the root, and 0 at the leaves.

The ext4_ext_check_header() function is given a depth and checks
the header agaisnt that depth; it expects the on-disk semantics,
but we are giving it the opposite in the while loop in this 
function.  We should be giving it the on-disk notion of "depth"
which we can get from (p_depth - depth) - and if you look, the last
(more commonly hit) call to ext4_ext_check_header() does just this.

Sending in the wrong depth results in (incorrect) messages
about corruption:

EXT4-fs error (device sdb1): ext4_ext_search_right: bad header
in inode #2621457: unexpected eh_depth - magic f30a, entries 340,
max 340(0), depth 1(2)

http://bugzilla.kernel.org/show_bug.cgi?id=12821

Reported-by: David Dindorp <ddi@dubex.dk>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-10 18:18:47 -04:00
Ingo Molnar
e2b8b28085 Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-03-10 22:55:31 +01:00
Ingo Molnar
4dd163a051 Merge branches 'tracing/ftrace', 'tracing/textedit' and 'linus' into tracing/core 2009-03-10 22:54:23 +01:00
Johannes Weiner
96fe2ab830 HID: fix waitqueue usage in hiddev
DECLARE_WAITQUEUE doesn't initialize the wait descriptor's task_list
to 'empty' but to zero.

prepare_to_wait() will not enqueue the descriptor to the waitqueue and
finish_wait() will do list_del_init() on a list head that contains
NULL pointers, which oopses.

This was introduced by 079034073 "HID: hiddev cleanup -- handle all
error conditions properly".

The prior code used an unconditional add_to_waitqueue() which didn't
care about the wait descriptor's list head and enqueued the thing
unconditionally.

The new code uses prepare_to_wait() which DOES check the prior list
state, so use DEFINE_WAIT instead.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-10 22:44:01 +01:00
Johannes Weiner
48e7a3c95c HID: fix incorrect free in hiddev
If hiddev_open() fails, it wrongly frees the shared hiddev structure
kept in hiddev_table instead of the hiddev_list structure allocated
for the opened file descriptor.  Existing references to this structure
will then accessed free memory.

This was introduced by 079034073 "HID: hiddev cleanup -- handle all
error conditions properly".

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-10 22:43:56 +01:00
Steven Rostedt
80370cb758 tracing: use raw spinlocks for trace_vprintk
Impact: prevent locking up by lockdep tracer

The lockdep tracer uses trace_vprintk and thus trace_vprintk can not
call back into lockdep without locking up.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 17:16:35 -04:00
Eric Anholt
040aefa263 drm/i915: Fix bad \n in MTRR failure notice.
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10 13:11:35 -07:00
Pierre Willenbrock
66824bd7b5 drm/i915: Don't restore palettes through VGA registers.
The VGA registers just hit the pipe registers that we already set through
MMIO.  This fixes strange colors on resume.

Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10 13:11:12 -07:00
Kyle McMartin
0fce81e3cc i915: add newline to i915_gem_object_pin failure msg
Prevents formatting nasty as below:

[drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10 13:11:11 -07:00
Kristian Høgsberg
b70d11da61 drm: Return EINVAL on duplicate objects in execbuffer object list
If userspace passes an object list with the same object appearing more
than once, we end up hitting the BUG_ON() in
i915_gem_object_set_to_gpu_domain() as it gets called a second time
for the same object.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10 13:11:11 -07:00
Mark Brown
f455dfb106 ASoC: Fix up merge with the ARM tree
The same change has been made with the final lines in slightly differnet
orders.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10 19:51:07 +00:00
Daniel Mack
cbf1146d5e ASoC: don't touch pxa-ssp registers when stream is running
In pxa_ssp_set_dai_fmt(), check whether there is anything to do at all.
If there would be but the SSP port is in use already, bail out.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10 19:44:04 +00:00
Martin Michlmayr
ace14b8263 [ARM] Orion: Fix some typos in the DNS-323 support code
Fix some typos in the DNS-323 support code.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-10 15:09:01 -04:00
Linus Torvalds
1abaf3326b Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86 mmiotrace: fix remove_kmmio_fault_pages()
2009-03-10 12:03:30 -07:00
Peter Zijlstra
6cc3c6e12b trace_clock: fix preemption bug
Using the function_graph tracer in recent kernels generates a spew of
preemption BUGs. Fix this by not requiring trace_clock_local() users
to disable preemption themselves.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 20:03:01 +01:00
Steven Rostedt
ef18012b24 tracing: remove funky whitespace in the trace code
Impact: clean up

There existed a lot of <space><tab>'s in the tracing code. This
patch removes them.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 14:13:14 -04:00
Ingo Molnar
f24ade3a33 x86, sched_clock(): mark variables read-mostly
Impact: micro-optimization

There's a number of variables in the sched_clock() path that are
in .data/.bss - but not marked __read_mostly. This creates the
danger of accidental false cacheline sharing with some other,
write-often variable.

So mark them __read_mostly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 19:02:30 +01:00
Jaswinder Singh Rajput
9b779edf4b x86: cpu architecture debug code
Introduce:

 cat /sys/kernel/debug/x86/cpu/*

for Intel and AMD processors to view / debug the state of each CPU.

By using this we can debug whole range of registers and other
cpu information for debugging purpose and monitor how things
are changing.

This can be useful for developers as well as for users.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1236701373.3387.4.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 18:39:45 +01:00
Chris Mason
913d952eb5 Btrfs: Clear space_info full when adding new devices
The full flag on the space info structs tells the allocator not to try
and allocate more chunks because the devices in the FS are fully allocated.

When more devices are added, we need to clear the full flag so the allocator
knows it has more space available.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-10 13:17:18 -04:00
Steven Rostedt
0e3d0f0566 tracing: update comments to match event code macros
Impact: clean up / comments

The comments that described the ftrace macros to manipulate the
TRACE_EVENT and TRACE_FORMAT macros no longer match the code.
This patch updates them.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 13:12:58 -04:00
Steven Rostedt
823f9124fb tracing: document TRACE_EVENT macro in tracepoint.h
Impact: clean up / comments

Kosaki Motohiro asked about an explanation to the TRACE_EVENT macro.
Ingo Molnar replied with a nice description.

This patch takes the description that Ingo wrote (with some slight
modifications) and adds it to the tracepoint.h file.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 12:58:51 -04:00
Steven Rostedt
30a8fecc2d tracing: flip the TP_printk and TP_fast_assign in the TRACE_EVENT macro
Impact: clean up

In trying to stay consistant with the C style format in the TRACE_EVENT
macro, it makes more sense to do the printk after the assigning of
the variables.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 12:41:38 -04:00
Chris Mason
4184ea7f90 Btrfs: Fix locking around adding new space_info
Storage allocated to different raid levels in btrfs is tracked by
a btrfs_space_info structure, and all of the current space_infos are
collected into a list_head.

Most filesystems have 3 or 4 of these structs total, and the list is
only changed when new raid levels are added or at unmount time.

This commit adds rcu locking on the list head, and properly frees
things at unmount time.  It also clears the space_info->full flag
whenever new space is added to the FS.

The locking for the space info list goes like this:

reads: protected by rcu_read_lock()
writes: protected by the chunk_mutex

At unmount time we don't need special locking because all the readers
are gone.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-10 12:39:20 -04:00
Ben Dooks
1288b670e6 [ARM] S3C64XX: add AHB_CON and SPCON register address definitions
Add the address definitions for S3C64XX_AHB_CONx and
SPCON registers for use in the PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:33:42 +00:00
Ben Dooks
36d543a3b5 [ARM] S3C64XX: Add definitions for the GPIO memory port configurations
Add defines for the registers that control the GPIO pins that are
run the memory interface.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:33:26 +00:00
Ben Dooks
2ae0b117a6 [ARM] S3C64XX: SYSCON power and sleep control register defines
Add the register defines for the sleep and power control
functions in the S3C64XX SYSCON register block.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:33:08 +00:00
Linus Torvalds
a651d79979 Merge branch 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  video: deferred io cleanup fix for sh_mobile_lcdcfb
  sh: Add media/soc_camera.h to board setup of Renesas AP325RXA
2009-03-10 09:31:19 -07:00
Ben Dooks
2454e524bc [ARM] S3C64XX: Add S3C64XX_SPCON register bit definitions
Add the definitions for the SPCON register in the
GPIO block.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:30:44 +00:00
Ben Dooks
e383707131 [ARM] S3C64XX: Add GPIO SPCONSLP and SLPEN register definitions
Add GPIO register definitions for SPCONSLP and SLPEN
for controlling the state of the pins over sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:30:27 +00:00
Ben Dooks
333053733f [ARM] S3C64XX: Add EINT group regs and move IRQ_EINT to regs-gpio.h
Add definitions for the EINT group registers and move the EINT IRQ
register definitions out of arch/arm/plat-s3c64xx/irq-eint.c so that
they are available for re-use with PM and the other code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:29:11 +00:00
Ben Dooks
5b3d515fcf [ARM] S3C64XX: Add modem registers and a virtual map
Add the modem registers and a virtual mapping for the
modem block. This is is required as there are registers
that control the LCD block that need to be saved over
suspend as well as interrupt controls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:26:52 +00:00
Ingo Molnar
2395037e5d Merge branch 'core/printk' into tracing/ftrace 2009-03-10 17:17:32 +01:00
Steven Rostedt
2314c4ae14 tracing: add back the available_events file
The event directory files type and available_types were no longer
needed with the new TRACE_EVENT_FORMAT macros, they were deleted.
But by accident the available_events file was also removed.
This patch brings it back.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 12:04:02 -04:00
Peter Zijlstra
57310a98a3 sched: optimize ttwu vs group scheduling
Impact: micro-optimization

We can avoid the sched domain walk on try_to_wake_up() when we know
there are no groups.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236603381.8389.455.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 16:43:36 +01:00
Hugo Villeneuve
090cec81ae ALSA: ASoC: Davinci: Updated sffsdr_hw_params() function to new format
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10 15:42:48 +00:00
Hugo Villeneuve
14cbba89ae ALSA: ASoC: Davinci: Replaced DAI format RIGHT_J by DSP_B for SFFSDR
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10 15:42:48 +00:00
Mark Brown
b3d7e3c99d Merge commit 'takashi/topic/asoc' into for-2.6.30 2009-03-10 15:42:03 +00:00
Ingo Molnar
8c54436ae9 Merge branches 'sched/cleanups' and 'linus' into sched/core 2009-03-10 16:34:43 +01:00
Steven Rostedt
40e26815fa tracing: do not allow modifying the ftrace events via the event files
Impact: fix to prevent crash on calling NULL function pointer

The ftrace internal records have their format exported via the event
system under the ftrace subsystem. These are only for exporting the
format to allow binary readers to be able to parse them in a binary
output.

The ftrace subsystem events can only be enabled via the ftrace tracers
and do not have a registering function. The event files expect the
event record to have registering function and will call it directly.
Passing in a ftrace subsystem event will cause the kernel to crash
because it will execute a NULL pointer.

This patch prevents the ftrace subsystem from being viewable to the
event enabling files.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 11:32:40 -04:00
Masami Hiramatsu
7cf4942704 x86: expand irq-off region in text_poke()
Expand irq-off region to cover fixmap using code and cache synchronizing.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <49B54688.8090403@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 16:24:23 +01:00
Takashi Iwai
df481e41b9 ALSA: hda - Clean up Cxt5047 parser
Clean up Conexant 5047 pareser code:
 - Split mixer elements to separate arrays to reduce the duplicated
   entires
 - Fix mixer element names to the standard ones
 - Remove unneeded cxt5047_hp2_unsol_event; the normal unsol_event
   handler works fine.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10 15:35:35 +01:00
Andrew Vasquez
5fa0ae1982 [SCSI] qla2xxx: Update version number to 8.03.00-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:28:03 -05:00
Andrew Vasquez
ca42f2b5f5 [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size.
The value is already pre-assigned prior to the qla2x00_mem_alloc().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:55 -05:00
Andrew Vasquez
c6b2fca820 [SCSI] qla2xxx: Correct truncation in return-code status checking.
QLA_* return codes are 'int' in size.  There were still several
legacy check-points which assumed a return-code width of 8-bits.
This could cause incorrect assumptions of 'good' status if a
return of QLA_FUNCTION_TIMEOUT.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Anirban Chakraborty
ee546b6e04 [SCSI] qla2xxx: Correct vport delete bug.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Lalit Chandivade
605aa2bcd5 [SCSI] qla2xxx: Use correct value for max vport in LOOP topology.
Use minimum value for max vport during firmware initialization in LOOP
topology. Using max vport value from get resource count in LOOP topology
causes firmware initialization failure.

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Andrew Vasquez
6431c5dc5e [SCSI] qla2xxx: Correct address range checking for option-rom updates.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:53 -05:00