Commit graph

691,473 commits

Author SHA1 Message Date
Theodore Ts'o
afc32f7ee9 ext4: Track lifetime disk writes
Add a new superblock value which tracks the lifetime amount of writes
to the filesystem.  This is useful in estimating the amount of wear on
solid state drives (SSD's) caused by writes to the filesystem.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-02-28 19:39:58 -05:00
Aneesh Kumar K.V
d6014301b5 ext4: Fix discard of inode prealloc space with delayed allocation.
With delayed allocation we should not/cannot discard inode prealloc
space during file close. We would still have dirty pages for which we
haven't allocated blocks yet. With this fix after each get_blocks
request we check whether we have zero reserved blocks and if yes and
we don't have any writers on the file we discard inode prealloc space.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-27 22:36:43 -04:00
David S. Miller
18963caaf5 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2009-02-28 15:36:58 -08:00
David S. Miller
98f8948f13 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-02-28 15:34:24 -08:00
Andy Whitcroft
0f4954819f Input: psmouse - add newline to OLPC HGPK touchpad debugging
When probing for the OLPC HGPK touchpad the ID of the probed touchpad is
emitted, but the debug is missing the terminating newline.  This causes
later information to run into it, and for that to be categorised
incorrectly at KERN_DBG.  Fix this up.

Reported-by: Matt Zimmerman <mdz@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:56:23 -08:00
Arjan Opmeer
9ab7b25e6a Input: elantech - touchpad driver miss-recognising logitech mice
Some Logitech mice react to the magic knock like Elantech touchpad would.
This leads to those mice being misdetected as Elantech touchpads.  Add a
version query to elantech_detect() to distinguish the two.

[dtor@mail.ru:
 - lower severity of some messages - when we are not sure yet if
   device is Elantech or not not responding to knock is not an error.
]

Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:39 -08:00
Andy Whitcroft
4d36845680 Input: synaptics - ensure we reset the device on resume
When resuming from suspend newer Synaptics touchpads do not recover
correctly.  Analysis of the resume sequence as applied in Linux was
compared to that of other operating systems.  This indicated that the
other OSs were resetting the mouse before attempting to detect it (for
all Synaptics touchpads, old and new).  Applying this same modification
fixes these newer Synaptics touchpads and brings the driver into line
with common OS reset behaviour.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:32 -08:00
Daniel Ritz
139ebe8dc8 Input: usbtouchscreen - fix eGalax HID ignoring
Commit ec42d4481e broke usbtouchscreen for
some eGalax/EETI devices that claim to be HID, but are not.

Devices confirmed to be real HID have the class set to HID and the protocol
set to 'mouse'.  Some have HID class but protocol set to 'none'. Those are
not HID and should be driven by usbtouchscreen.

Fix the device ignoring macro by adding match for the protocol too.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:25 -08:00
Mark Brown
8b37dbd2a1 ASoC: Add SND_SOC_DAPM_PIN_SWITCH controls for exposing DAPM pins
On some systems it is desirable for control for DAPM pins to be provided
to user space. This is the case with things like GSM modems which are
controlled primarily from user space, for example. Provide a helper which
exposes the state of a DAPM pin to user space for use in cases like this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28 21:31:21 +00:00
Daniel Mack
4eae080dda ASoC: Add cs4270 support for slave mode configurations
Added support for scenarios where the Cirrus CS4270 audio codec is slave
to the bitclk and lrclk. Mixed setups are unsupported.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28 17:18:25 +00:00
Ben Dooks
c8efef1745 ASoC: Fix copyright statements on Simtec files
Fix the copyright statements in two of the S3C24XX ASoC files
that have (c) when we require the full word.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28 17:18:24 +00:00
Ingo Molnar
92b9af9e4f x86: i915 needs pgprot_writecombine() and is_io_mapping_possible()
Impact: build fix

Theodore Ts reported that the i915 driver needs these symbols:

 ERROR: "pgprot_writecombine" [drivers/gpu/drm/i915/i915.ko] undefined!
 ERROR: "is_io_mapping_possible" [drivers/gpu/drm/i915/i915.ko] undefined!

Reported-by: Theodore Ts'o <tytso@mit.edu> wrote:
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 14:22:44 +01:00
Jaswinder Singh Rajput
f87ad35d37 x86: AMD Support for perf_counter
Supported basic performance counter for AMD K7 and later:

$ perfstat -e 0,1,2,3,4,5,-1,-2,-3,-4,-5 ls > /dev/null

 Performance counter stats for 'ls':

      12.298610  task clock ticks     (msecs)

        3298477  CPU cycles           (events)
        1406354  instructions         (events)
         749035  cache references     (events)
          16939  cache misses         (events)
         100589  branches             (events)
          11159  branch misses        (events)
       7.627540  cpu clock ticks      (msecs)
      12.298610  task clock ticks     (msecs)
            500  pagefaults           (events)
              6  context switches     (events)
              3  CPU migrations       (events)

 Wall-clock time elapsed:     8.672290 msecs

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 10:38:32 +01:00
Jaswinder Singh Rajput
b56a3802dc x86: prepare perf_counter to add more cpus
Introduced  struct pmc_x86_ops to add more cpus.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 10:38:27 +01:00
Ingo Molnar
acdb2c2879 Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-02-28 10:15:58 +01:00
Steven Rostedt
f2034f1e1a tracing: create the C style tracing for the irq subsystem
This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the irq subsystem trace points.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 04:04:14 -05:00
Steven Rostedt
629928041c tracing: create the C style tracing for the sched subsystem
This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the sched subsystem trace points.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 04:04:13 -05:00
Steven Rostedt
fd99498989 tracing: add raw fast tracing interface for trace events
This patch adds the interface to enable the C style trace points.
In the directory /debugfs/tracing/events/subsystem/event
We now have three files:

 enable : values 0 or 1 to enable or disable the trace event.

 available_types: values 'raw' and 'printf' which indicate the tracing
       types available for the trace point. If a developer does not
       use the TRACE_EVENT_FORMAT macro and just uses the TRACE_FORMAT
       macro, then only 'printf' will be available. This file is
       read only.

 type: values 'raw' or 'printf'. This indicates which type of tracing
       is active for that trace point. 'printf' is the default and
       if 'raw' is not available, this file is read only.

 # echo raw > /debug/tracing/events/sched/sched_wakeup/type
 # echo 1 > /debug/tracing/events/sched/sched_wakeup/enable

 Will enable the C style tracing for the sched_wakeup trace point.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 04:04:03 -05:00
Hiroshi Shimamoto
1fae0279ce x86: signal: introduce helper align_sigframe()
Impact: cleanup

Introduce helper align_sigframe() to align stack pointer for signal frame.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:31 +01:00
Hiroshi Shimamoto
75779f0526 x86: signal: unify get_sigframe()
Impact: cleanup

Unify get_sigframe().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:30 +01:00
Hiroshi Shimamoto
36a4526583 x86: signal: use 16 bytes boundary for rt_sigframe
Impact: cleanup

Supporting xsave/xrestore introduces 64 bytes boundary for save_i387_xstate().
16 bytes boundary is OK for rt_sigframe.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:30 +01:00
Hiroshi Shimamoto
97286a2b64 x86: signal: intrroduce get_sigframe() and replace get_sigstack()
Impact: cleanup

Introduce get_sigframe() like 32-bit to replace get_sigstack().
Move the i387 stuff into get_sigframe().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:29 +01:00
Hiroshi Shimamoto
144b0712dd x86: signal: add __user annotation
Impact: cleanup

Add missing __user annotation to the parameter of get_sigframe().
Also change cast type to void __user * of *fpstate.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:29 +01:00
Steven Rostedt
c32e827b25 tracing: add raw trace point recording infrastructure
Impact: lower overhead tracing

The current event tracer can automatically pick up trace points
that are registered with the TRACE_FORMAT macro. But it required
a printf format string and parsing. Although, this adds the ability
to get guaranteed information like task names and such, it took
a hit in overhead processing. This processing can add about 500-1000
nanoseconds overhead, but in some cases that too is considered
too much and we want to shave off as much from this overhead as
possible.

Tom Zanussi recently posted tracing patches to lkml that are based
on a nice idea about capturing the data via C structs using
STRUCT_ENTER, STRUCT_EXIT type of macros.

I liked that method very much, but did not like the implementation
that required a developer to add data/code in several disjoint
locations.

This patch extends the event_tracer macros to do a similar "raw C"
approach that Tom Zanussi did. But instead of having the developers
needing to tweak a bunch of code all over the place, they can do it
all in one macro - preferably placed near the code that it is
tracing. That makes it much more likely that tracepoints will be
maintained on an ongoing basis by the code they modify.

The new macro TRACE_EVENT_FORMAT is created for this approach. (Note,
a developer may still utilize the more low level DECLARE_TRACE macros
if they don't care about getting their traces automatically in the event
tracer.)

They can also use the existing TRACE_FORMAT if they don't need to code
the tracepoint in C, but just want to use the convenience of printf.

So if the developer wants to "hardwire" a tracepoint in the fastest
possible way, and wants to acquire their data via a user space utility
in a raw binary format, or wants to see it in the trace output but not
sacrifice any performance, then they can implement the faster but
more complex TRACE_EVENT_FORMAT macro.

Here's what usage looks like:

  TRACE_EVENT_FORMAT(name,
	TPPROTO(proto),
	TPARGS(args),
	TPFMT(fmt, fmt_args),
	TRACE_STUCT(
		TRACE_FIELD(type1, item1, assign1)
		TRACE_FIELD(type2, item2, assign2)
			[...]
	),
	TPRAWFMT(raw_fmt)
	);

Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT
uses.

 name: is the unique identifier of the trace point
 proto: The proto type that the trace point uses
 args: the args in the proto type
 fmt: printf format to use with the event printf tracer
 fmt_args: the printf argments to match fmt

 TRACE_STRUCT starts the ability to create a structure.
 Each item in the structure is defined with a TRACE_FIELD

  TRACE_FIELD(type, item, assign)

 type: the C type of item.
 item: the name of the item in the stucture
 assign: what to assign the item in the trace point callback

 raw_fmt is a way to pretty print the struct. It must match
  the order of the items are added in TRACE_STUCT

 An example of this would be:

 TRACE_EVENT_FORMAT(sched_wakeup,
	TPPROTO(struct rq *rq, struct task_struct *p, int success),
	TPARGS(rq, p, success),
	TPFMT("task %s:%d %s",
	      p->comm, p->pid, success?"succeeded":"failed"),
	TRACE_STRUCT(
		TRACE_FIELD(pid_t, pid, p->pid)
		TRACE_FIELD(int, success, success)
	),
	TPRAWFMT("task %d success=%d")
	);

 This creates us a unique struct of:

 struct {
	pid_t		pid;
	int		success;
 };

 And the way the call back would assign these values would be:

	entry->pid = p->pid;
	entry->success = success;

The nice part about this is that the creation of the assignent is done
via macro magic in the event tracer.  Once the TRACE_EVENT_FORMAT is
created, the developer will then have a faster method to record
into the ring buffer. They do not need to worry about the tracer itself.

The developer would only need to touch the files in include/trace/*.h

Again, I would like to give special thanks to Tom Zanussi for this
nice idea.

Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:09:32 -05:00
Steven Rostedt
ef5580d0ff tracing: add interface to write into current tracer buffer
Right now all tracers must manage their own trace buffers. This was
to enforce tracers to be independent in case we finally decide to
allow each tracer to have their own trace buffer.

But now we are adding event tracing that writes to the current tracer's
buffer. This adds an interface to allow events to write to the current
tracer buffer without having to manage its own. Since event tracing
has no "tracer", and is just a way to hook into any other tracer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:06:44 -05:00
Steven Rostedt
3d7ba938da tracing: add subsystem sched for sched events
Add the TRACE_SYSTEM sched for the sched events.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:06:31 -05:00
Steven Rostedt
0ec2ef1505 tracing: add subsystem irq for irq events
Add the TRACE_SYSTEM irq for the irq events.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:06:13 -05:00
Steven Rostedt
b628b3e629 tracing: make the set_event and available_events subsystem aware
This patch makes the event files, set_event and available_events
aware of the subsystem.

Now you can enable an entire subsystem with:

  echo 'irq:*' > set_event

Note: the '*' is not needed.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:05:40 -05:00
Ingo Molnar
e9abf4c59d Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-02-28 09:03:58 +01:00
Ingo Molnar
4387d6d6b8 Merge branch 'tracing/ftrace' into tracing/core 2009-02-28 09:02:49 +01:00
Steven Rostedt
6ecc2d1ca3 tracing: add subsystem level to trace events
If a trace point header defines TRACE_SYSTEM, then it will add the
following trace points into that event system.

If include/trace/irq_event_types.h has:

 #define TRACE_SYSTEM irq

at the top and

 #undef TRACE_SYSTEM

at the bottom, then a directory "irq" will be created in the
/debug/tracing/events directory. Inside that directory will contain the
two trace points that are defined in include/trace/irq_event_types.h.

Only adding the above to irq and not to sched, we get:

 # ls /debug/tracing/events/
irq                     sched_process_exit  sched_signal_send  sched_wakeup_new
sched_kthread_stop      sched_process_fork  sched_switch
sched_kthread_stop_ret  sched_process_free  sched_wait_task
sched_migrate_task      sched_process_wait  sched_wakeup

 # ls /debug/tracing/events/irq
irq_handler_entry  irq_handler_exit

If we add #define TRACE_SYSTEM sched to the trace/sched_event_types.h
then the rest of the trace events will be put in a sched directory
within the events directory.

I've been playing with this idea of the subsystem for a while, but
recently Tom Zanussi posted some patches to lkml that included this
method. Tom's approach was clean and got me to finally put some effort
to clean up the event trace points.

Thanks to Tom Zanussi for demonstrating how nice the subsystem
method is.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 02:59:43 -05:00
Steven Rostedt
eb594e45f6 tracing: move trace point formats to files in include/trace directory
Impact: clean up

To further facilitate the ease of adding trace points for developers, this
patch creates include/trace/trace_events.h and
include/trace/trace_event_types.h.

The former file will hold the trace/<type>.h files and the latter will hold
the trace/<type>_event_types.h files.

To create new tracepoints and to have them automatically
appear in the event tracer, a developer makes the trace/<type>.h file
which includes <linux/tracepoint.h> and the trace/<type>_event_types.h file.

The trace/<type>_event_types.h file will hold the TRACE_FORMAT
macros.

Then add the trace/<type>.h file to trace/trace_events.h,
and add the trace/<type>_event_types.h to the trace_event_types.h file.

No need to modify files elsewhere.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 02:58:50 -05:00
Gustavo F. Padovan
c577b098f9 x86, fixmap: unify fixmap.h
Impact: unification

This patch unify fixmap_32.h and fixmap_64.h into fixmap.h.
Things that we can't merge now are using CONFIG_X86_{32,64}
(e.g.:vsyscall and EFI)

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-27 20:57:48 -08:00
Gustavo F. Padovan
c78f322ce8 x86, fixmap: prepare fixmap_32.h for unification
Impact: cleanup

Just prepare fixmap for later mechanic unification.
No real modification on code.

   text    data     bss     dec     hex filename
3831152  353188  372736 4557076  458914 vmlinux-32.after
3831152  353188  372736 4557076  458914 vmlinux-32.before

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-27 20:57:48 -08:00
Gustavo F. Padovan
e365bcd921 x86, fixmap: prepare fixmap_64.h for unification
Impact: cleanup

Just prepare fixmap for later mechanic unification.
No real modification on code.

  text    data     bss     dec     hex filename
4312362  527192  421924 5261478  5048a6 vmlinux-64.after
4312362  527192  421924 5261478  5048a6 vmlinux-64.before

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-27 20:57:48 -08:00
Gustavo F. Padovan
5f403fa9de x86, fixmap: add CONFIG_EFI
Impact: new fixmap allocation

FIX_EFI_IO_MAP_FIRST_PAGE is used only when EFI is enabled.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-27 20:57:47 -08:00
Gustavo F. Padovan
2ae38daf25 x86, fixmap: add CONFIG_X86_{LOCAL,IO}_APIC
Impact: New fixmap allocations

Add CONFIG_X86_{LOCAL,IO}_APIC to enum fixed_address.
FIX_APIC_BASE is used only when CONFIG_X86_LOCAL_APIC is
enabled and FIX_IO_APIC_BASE_* are used only when
CONFIG_X86_IO_APIC is enabled.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-27 20:57:47 -08:00
Gustavo F. Padovan
fd862dde18 x86, fixmap: define reserve_top_address for x86_64
Impact: new interface (not yet use)

Define reserve_top_address for x86_64; only for later x86 integration.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-27 20:57:47 -08:00
Gustavo F. Padovan
ab93e3c45d x86, fixmap: define FIXADDR_BOOT_* and redefine FIX_ADDR_SIZE
Impact: new interface, not yet used

Now, with these macros, x86_64 code can know where start the
permanent and non-permanent fixed mapped address.
This patch make these macros equal fixmap_32.h for future
x86 integration.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-27 20:57:47 -08:00
Gustavo F. Padovan
d09375a9ec x86, fixmap: rename __FIXADDR_SIZE and __FIXADDR_BOOT_SIZE
Impact: rename

Rename __FIXADDR_SIZE to FIXADDR_SIZE
and __FIXADDR_BOOT_SIZE to FIXADDR_BOOT_SIZE.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Acked-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-27 20:57:47 -08:00
Linus Torvalds
778ef1e6cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: w35und: fix usb_control_msg() error handling in wb35_probe()
  Staging: w35und: fix registration with wlan stack
  Staging: panel: fix oops on panel_cleanup_module
  Staging: rtl8187se: Fix oops and memory poison caused by builtin ieee80211.
  Staging: rtl8187se: fix Kconfig dependencies
2009-02-27 16:49:46 -08:00
Linus Torvalds
3c4f1158cd Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (21 commits)
  USB: musb: fix srp sysfs entry deletion
  USB: musb: resume suspended root hub on disconnect
  USB: musb: use right poll limit for low speed devices
  USB: musb: be careful with 64K+ transfer lengths, host side
  USB: musb: fix data toggle saving with shared FIFO
  USB: musb: host endpoint_disable() oops fixes
  USB: musb: fix urb_dequeue() method
  USB: musb: fix musb_host_tx() for shared endpoint FIFO
  USB: musb: be careful with 64K+ transfer lengths (gadget side)
  usb: musb: make Davinci *work* in mainline
  USB: usb_get_string should check the descriptor type
  USB: gadget: fix build error in omap_apollon_2420_defconfig
  USB: g_file_storage: automatically disable stalls under Atmel
  USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters
  USB: Quirk for Hummingbird huc56s / Conexant ACM modem
  USB: serial: add support for second revision of Ericsson F3507G WWAN card
  USB: cdc-acm: add usb id for motomagx phones
  USB: option: add BenQ 3g modem information
  usb: gadget: obex: select correct ep descriptors
  USB: EHCI: slow down ITD reuse
  ...
2009-02-27 16:49:26 -08:00
Linus Torvalds
7187adbf08 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  Revert "MIPS: Print irq handler description"
  MIPS: CVE-2009-0029: Enable syscall wrappers.
  MIPS: Alchemy: In plat_time_init() t reaches -1, tested: 0
  MIPS: Only allow Cavium OCTEON to be configured for boards that support it
2009-02-27 16:48:33 -08:00
Linus Torvalds
535d8e8f19 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: enable DMAR by default
  xen: disable interrupts early, as start_kernel expects
  gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_t
  gpu/drm, x86, PAT: Handle io_mapping_create_wc() errors in a clean way
  x86, Voyager: fix compile by lifting the degeneracy of phys_cpu_present_map
  x86, doc: fix references to Documentation/x86/i386/boot.txt
2009-02-27 16:43:05 -08:00
Linus Torvalds
6febf65b29 Merge branch 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: ap325rxa: Revert ov772x support.
  serial: sh-sci: fix overrun error handling for SH7785 SCIF.
  sh: Storage class should be before const qualifier
2009-02-27 16:40:00 -08:00
Linus Torvalds
174eef11a2 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (10696): Remove outdated README for the flexcop-driver
  V4L/DVB (10695): Update Technisat card documentation
  V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards
  V4L/DVB (10663): soc-camera: fix S_CROP breakage on PXA and SuperH
  V4L/DVB (10659): em28xx: register device to soundcard for sysfs
2009-02-27 16:28:18 -08:00
Christoph Hellwig
5cf8cf4146 Fix FREEZE/THAW compat_ioctl regression
Commit 8e961870bb removed the FREEZE/THAW
handling in xfs_compat_ioctl but never added any compat handler back, so
now any freeze/thaw request from a 32-bit binary ond 64-bit userspace
will fail.

As these ioctls are 32/64-bit compatible two simple COMPATIBLE_IOCTL
entries in fs/compat_ioctl.c will do the job.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-27 16:27:45 -08:00
David Altobelli
31d8b5631f hpilo: new pci device
Future iLO devices will have an HP vendor id.

Signed-off-by: David Altobelli <david.altobelli@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-27 16:26:22 -08:00
Andy Whitcroft
bea5606d08 checkpatch: version 0.28
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-27 16:26:22 -08:00
Andy Whitcroft
417495eda3 checkpatch: add __ref as a sparse modifier
Add __ref as a sparse modifier.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-27 16:26:22 -08:00