Commit graph

691,473 commits

Author SHA1 Message Date
Bob Copeland
65fe4656b7 ath9k: remove prototype for ath9k_regd_get_current_country
ath9k_regd_get_current_country() doesn't exist.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:47 -05:00
Bob Copeland
17580f6ab1 ath9k: remove ath9k_regd_get_rd()
The function ath9k_regd_get_rd() is unused.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:47 -05:00
Bob Copeland
d0f48f9d1f ath9k: convert isWwrSKU macro into C code
Write isWwrSKU as an inline function and nix the camel-case to make
the routine slightly clearer.  Change its argument to take the regd
value directly so it can eventually be used by ath5k as well.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:47 -05:00
Bob Copeland
e775aaf07a ath9k: save a few calls to ath9k_regd_get_eepromRD
Since we already have a stack variable to track the eeprom regd,
we can grab it up front it and save three calls to fetch it again.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:47 -05:00
Bob Copeland
63a7c8e254 ath9k: remove write-only current_rd_inuse
The current_rd_inuse regulatory value is assigned but not used anywhere.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:46 -05:00
Helmut Schaa
795cc0ad54 iwlagn: clean up error path in iwl_pci_probe
This avoids triggering a BUG_ON in pci_disable_msi in the error path.
Furthermore remove the first call to pci_disable_device as it is already
called at out_pci_disable_device.

Both issues were introduced in the patch "iwlagn: fix hw-rfkill while
the interface is down".

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:46 -05:00
Senthil Balasubramanian
8bd1d07f93 ath9k: Add open loop control support
This patch adds Open Loop Control support for Atheros chipsets that
supports open loop power control.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:46 -05:00
Sujith
81cb7623ad mac80211: Extend the rate control API with an update callback
The AP can switch dynamically between 20/40 Mhz channel width,
in which case we switch the local operating channel, but the
rate control algorithm is not notified. This patch adds a new callback
to indicate such changes to the RC algorithm.

Currently, HT channel width change is notified, but this callback
can be used to indicate any new requirements that might come up later on.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:45 -05:00
Sujith
b06e786d4c ath9k: Decrease minimum NF threshold
The existing value was too conservative, causing
the history buffer not to be updated.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:45 -05:00
Sujith
668158af48 ath9k: Fix incorrect noise floor reading for 4k EEPROM
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:44 -05:00
Sujith
0fd06c90c2 ath9k: Fix bug in disabling MIB counters
This patch fixes a bug in ANI, where the MIB counters were
being cleared before the stats were updated.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:44 -05:00
Sujith
edf7c060f0 ath9k: Initialize AGC calibration properly
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:44 -05:00
Sujith
4af9cf4fda ath9k: Enable TSF Out of Range Interrupt
This patch lays the groundwork for handling TSF Out of Range
interrupt, which will be used for power save later on.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:43 -05:00
Sujith
06d0f0663e ath9k: Enable Fractional N mode
This patch enables Fractional N mode for all channel
if the EEPROM says so, and also fixes the INI only
when the device is not a 2 GHz only capable device.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:43 -05:00
Sujith
fec0de1110 ath9k: Fix rd_ext EEPROM capability for AR9285
AR9285 chipsets have a different EEPROM layout,
handle this appropriately when populating the rd_ext
capability.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:43 -05:00
Sujith
e421c7b35c ath9k: Store the correct max TX power level
This patch fixes a bug where the max power level
was being calculated incorrectly.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:42 -05:00
Johannes Berg
469002983f mac80211: split IBSS/managed code
This patch splits out the ibss code and data from managed (station) mode.
The reason to do this is to better separate the state machines, and have
the code be contained better so it gets easier to determine what exactly
a given change will affect, that in turn makes it easier to understand.

This is quite some churn, especially because I split sdata->u.sta into
sdata->u.mgd and sdata->u.ibss, but I think it's easier to maintain that
way. I've also shuffled around some code -- null function sending is only
applicable to managed interfaces so put that into that file, some other
functions are needed from various places so put them into util, and also
rearranged the prototypes in ieee80211_i.h accordingly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:42 -05:00
Johannes Berg
96f5e66e8a mac80211: fix aggregation for hardware with ampdu queues
Hardware with AMPDU queues currently has broken aggregation.

This patch fixes it by making all A-MPDUs go over the regular AC queues,
but keeping track of the hardware queues in mac80211. As a first rough
version, it actually stops the AC queue for extended periods of time,
which can be removed by adding buffering internal to mac80211, but is
currently not a huge problem because people rarely use multiple TIDs
that are in the same AC (and iwlwifi currently doesn't operate as AP).

This is a short-term fix, my current medium-term plan, which I hope to
execute soon as well, but am not sure can finish before .30, looks like
this:
 1) rework the internal queuing layer in mac80211 that we use for
    fragments if the driver stopped queue in the middle of a fragmented
    frame to be able to queue more frames at once (rather than just a
    single frame with its fragments)
 2) instead of stopping the entire AC queue, queue up the frames in a
    per-station/per-TID queue during aggregation session initiation,
    when the session has come up take all those frames and put them
    onto the queue from 1)
 3) push the ampdu queue layer abstraction this patch introduces in
    mac80211 into the driver, and remove the virtual queue stuff from
    mac80211 again

This plan will probably also affect ath9k in that mac80211 queues the
frames instead of passing them down, even when there are no ampdu queues.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:42 -05:00
Dan Williams
f3734ee6df make net/ieee80211.h private to ipw2x00
Only ipw2x00 now uses it.  Reduce confusion.  Profit!

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:42 -05:00
Dan Williams
1ea893fde2 hostap: convert usage of net/ieee80211.h to linux/ieee80211.h
So that net/ieee80211.h can be made private to ipw2x00 in a follow-up.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:41 -05:00
Roel Kluin
4d8faf6937 wavelan: Test arraysize before an element of the array.
Test arraysize before an element of the array.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:41 -05:00
Johannes Berg
076ae609d2 mac80211: disallow moving netns
mac80211 currently assumes init_net for all interfaces,
so really will not cope well with network namespaces,
at least at this time.

To change this, we would have keep track of the netns
in addition to the ifindex, which is not something I
want to think about right now.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:39 -05:00
Vasanthakumar Thiagarajan
53d6f81c78 mac80211: Make sure non-HT connection when IEEE80211_STA_TKIP_WEP_USED is set
It is possible that some broken AP might send HT IEs in it's
assoc response even though the STA has not sent them in assoc req
when WEP/TKIP is used as pairwise cipher suite. Also it is important
to check this bit before enabling ht mode in beacon receive path.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:39 -05:00
Bing Zhao
f5ac2b9eb5 libertas: fix power save issue in libertas_sdio module
The problem: "iwconfig ethX power on" returns error

The cause: "ps_supported" flag was never set for SD8385/8686

The fix: check firmware capabilities returned by GET_HW_SPEC command.
Set "ps_supported" to 1 if FW_CAPINFO_PS bit is on. This fix applies
to SDIO interface only.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:38 -05:00
Ralph Campbell
1d9bc6d648 IB/mad: Fix null pointer dereference in local_completions()
handle_outgoing_dr_smp() can queue a struct ib_mad_local_private
*local on the mad_agent_priv->local_work work queue with
local->mad_priv == NULL if device->process_mad() returns
IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY and
(!ib_response_mad(&mad_priv->mad.mad) ||
!mad_agent_priv->agent.recv_handler).

In this case, local_completions() will be called with local->mad_priv
== NULL. The code does check for this case and skips calling
recv_mad_agent->agent.recv_handler() but recv == 0 so
kmem_cache_free() is called with a NULL pointer.

Also, since recv isn't reinitialized each time through the loop, it
can cause a memory leak if recv should have been zero.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
2009-02-27 10:34:30 -08:00
Ramachandra K
7020cb0fe2 IB/mad: Fix RMPP header RRespTime manipulation
Fix ib_set_rmpp_flags() to use the correct bit mask for RRespTime.  In
the 8-bit field of the RMPP header, the first 5 bits are RRespTime and
next 3 bits are RMPPFlags. Hence to retain the first 5 bits, the mask
should be 0xF8 instead of 0xF1.

ack_recv()-->format_ack() calls ib_set_rmpp_flags() and due to the
incorrect ANDing with 0xF1, RRespTime got changed incorrectly and RMPP
Acks sent back always had a RRespTime of 0x1E (30) which caused the
other end to consider the time outs to be approximately 4297 seconds
(i.e. in the order of 4*2^30) instead of the usual ~4 seconds (order
of 4*2^20).

Signed-off-by: Ramachandra K <ramachandra.kuchimanchi@qlogic.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27 10:33:12 -08:00
Or Gerlitz
1aedb7721f IB/iser: Remove hard setting of path MTU
Remove hard setting of the IB MTU used by iSER's RC queue-pair to 1K,
as this was done due to inter-op issues with an old iser target which
is not used any more.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27 10:30:46 -08:00
Jack Morgenstein
085343b475 mlx4_core: Add device IDs for MT25458 10GigE devices
Add device IDs for Mellanox MT25458 ConnectX+10GBaseT 10GigE adapters.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27 10:29:13 -08:00
Ralf Baechle
5312dc6bc0 Revert "MIPS: Print irq handler description"
This reverts commit 558d1de8ba.
2009-02-27 17:56:35 +00:00
Ralf Baechle
dbda6ac089 MIPS: CVE-2009-0029: Enable syscall wrappers.
Thanks to David Daney helping with debugging and testing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
2009-02-27 17:56:35 +00:00
Roel Kluin
4b0d3f5c28 MIPS: Alchemy: In plat_time_init() t reaches -1, tested: 0
With a postfix decrement t reaches -1 rather than 0, so the fall-back will
not occur.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: mano@roarinelk.homelinux.net
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-02-27 17:56:34 +00:00
David Daney
5e6833892e MIPS: Only allow Cavium OCTEON to be configured for boards that support it
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-02-27 17:56:34 +00:00
Takashi Iwai
c82c8abdee ALSA: hda - Fix an "unused variable" compile warning
Forgot to remove an unused variable.
  sound/pci/hda/patch_realtek.c: In function ‘alc882_auto_init_analog_input’:
  sound/pci/hda/patch_realtek.c:7018: warning: unused variable ‘vref’

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27 17:52:22 +01:00
Takashi Iwai
53eff7e1e0 ALSA: hda - Match all 103c:17xx devices for HP BPC model
Use SND_PCI_QUIRK_MASK() to match all devices with 103c:17xx for
HP BPC model.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27 17:49:44 +01:00
Takashi Iwai
f897497673 Merge branch 'fix/hda' into topic/hda
Conflicts:
	sound/pci/hda/patch_realtek.c
2009-02-27 17:47:31 +01:00
Takashi Iwai
bb543c9694 ALSA: hda - Add quirk for new HP xw series
Added model=hp-bpc for new HP xw series (103c:170b).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27 17:44:07 +01:00
Takashi Iwai
ea18aa4644 ALSA: hda - Fix digital mic on dell-m4-1 and dell-m4-3
Fix num_dmuxes initialization for dell-m4-1 and dell-m4-3 models
of IDT 92HD71bxx codec, which was wrongly set to zero.

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27 17:36:33 +01:00
Clemens Ladisch
82af308f65 sound: oxygen: zero-initialize model data
Model drivers assume that model_data is zeroed, so we better use
kzalloc() (like we did before when it was allocated together with the
card structure).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27 17:32:21 +01:00
Steven Rostedt
0cfe82451d tracing: replace kzalloc with kcalloc
Impact: clean up

kcalloc is a better approach to allocate a NULL array.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-27 10:51:10 -05:00
Werner Almesberger
efeff56867 [ARM] S3C64XX: Fix s3c64xx_setrate_clksrc
Some of the rate selection logic in s3c64xx_setrate_clksrc uses what
appears to be parent clock selection logic. This patch corrects it.

I also added a check for overly large dividers to prevent them from
changing unrelated clocks.

Signed-off-by: Werner Almesberger <werner@openmoko.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-27 11:34:01 +00:00
Ben Dooks
fdca9bf2da [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/irq.c
Fix the following sparse warnings in arch/arm/plat-s3c64xx/irq.c

arch/arm/plat-s3c64xx/irq.c:210:23: warning: incorrect type in initializer (different address spaces)
arch/arm/plat-s3c64xx/irq.c:210:23:    expected void *reg_base
arch/arm/plat-s3c64xx/irq.c:210:23:    got void [noderef] <asn:2>*regs
arch/arm/plat-s3c64xx/irq.c:215:2: warning: incorrect type in argument 1 (different address spaces)
arch/arm/plat-s3c64xx/irq.c:215:2:    expected void const volatile [noderef] <asn:2>*<noident>
arch/arm/plat-s3c64xx/irq.c:215:2:    got void *

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-27 11:29:23 +00:00
Ben Dooks
3782d36055 [ARM] S3C64XX: sparse warnings in arch/arm/plat-s3c64xx/s3c6400-clock.c
Fix the following sparse warnings in s3c6400-clock.c:

39:12: warning: symbol 'clk_ext_xtal_mux' was not declared. Should it be static?
66:12: warning: symbol 'clk_fout_apll' was not declared. Should it be static?
81:19: warning: symbol 'clk_mout_apll' was not declared. Should it be static?
91:12: warning: symbol 'clk_fout_epll' was not declared. Should it be static?
106:19: warning: symbol 'clk_mout_epll' was not declared. Should it be static?
126:19: warning: symbol 'clk_mout_mpll' was not declared. Should it be static?
148:12: warning: symbol 'clk_dout_mpll' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-27 11:25:37 +00:00
Rini van Zetten
7958a45310 gianfar: Do right check on num_txbdfree
This patch fixes a wrong check on num_txbdfree. It could lead to
num_txbdfree become nagative.  Result was that the gianfar stops
sending data.

Changes from first version :
- removed a space between parens (David Millers comment)
- full email address in signed off line

Signed-off-by: Rini van Zetten <rini@arvoo.nl>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 03:18:48 -08:00
Jarek Poplawski
1844f74794 pkt_sched: sch_drr: Fix oops in drr_change_class.
drr_change_class lacks a check for NULL of tca[TCA_OPTIONS], so oops
is possible.

Reported-by: Denys Fedoryschenko <denys@visp.net.lb>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 02:42:38 -08:00
Dhaval Giani
54e9912428 sched: don't allow setuid to succeed if the user does not have rt bandwidth
Impact: fix hung task with certain (non-default) rt-limit settings

Corey Hickey reported that on using setuid to change the uid of a
rt process, the process would be unkillable and not be running.
This is because there was no rt runtime for that user group. Add
in a check to see if a user can attach an rt task to its task group.
On failure, return EINVAL, which is also returned in
CONFIG_CGROUP_SCHED.

Reported-by: Corey Hickey <bugfood-ml@fatooh.org>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-27 11:11:53 +01:00
peerchen
bedfcebb4f ALSA: hda - Add the Device IDs for MCP89 and remove IDs of MCP7B
Added the Device IDs for MCP89 HD audio controller.
Removed the IDs of MCP7B cause this chipset had been cancelled.

Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27 10:22:55 +01:00
Dhananjay Phadke
5d242f1cee netxen: update copyright
Extend copyright into 2009 and update address.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 01:00:44 -08:00
Hannes Eder
465e985087 drivers/isdn/hardware/eicon: fix sparse warnings: Should it be static?
Impact: Make symbols static.

Fix this sparse warnings:
  drivers/isdn/hardware/eicon/message.c:1197:6: warning: symbol 'connect_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1414:6: warning: symbol 'connect_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1570:6: warning: symbol 'connect_a_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1576:6: warning: symbol 'disconnect_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1631:6: warning: symbol 'disconnect_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1658:6: warning: symbol 'listen_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1707:6: warning: symbol 'info_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1816:6: warning: symbol 'info_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1822:6: warning: symbol 'alert_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:1852:6: warning: symbol 'facility_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:2602:6: warning: symbol 'facility_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:2608:6: warning: symbol 'connect_b3_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:2842:6: warning: symbol 'connect_b3_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:2957:6: warning: symbol 'connect_b3_a_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:2977:6: warning: symbol 'disconnect_b3_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:3033:6: warning: symbol 'disconnect_b3_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:3089:6: warning: symbol 'data_b3_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:3166:6: warning: symbol 'data_b3_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:3199:6: warning: symbol 'reset_b3_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:3240:6: warning: symbol 'reset_b3_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:3264:6: warning: symbol 'connect_b3_t90_a_res' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:3298:6: warning: symbol 'select_b_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:8692:6: warning: symbol 'sig_req' was not declared. Should it be static?
  drivers/isdn/hardware/eicon/message.c:8792:6: warning: symbol 'send_data' was not declared. Should it be static?

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 01:00:43 -08:00
Hannes Eder
215a9c78ae drivers/isdn/hardware/icon: fix sparse warning: cast truncates bits
Fix this sparse warning:
  drivers/isdn/hardware/eicon/debug.c:1201:32: warning: cast truncates bits from constant value (1000 becomes 0)

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 01:00:42 -08:00
Hannes Eder
e86a6a1b78 drivers/isdn/hisax: fix sparse warning: Should it be static?
Impact: Move declarations to a header file.

Fix this sparse warning:
  drivers/isdn/hisax/callc.c:24:12: warning: symbol 'lli_revision' was not declared. Should it be static?
  drivers/isdn/hisax/config.c:84:12: warning: symbol 'CardType' was not declared. Should it be static?
  drivers/isdn/hisax/config.c:362:5: warning: symbol 'nrcards' was not declared. Should it be static?
  drivers/isdn/hisax/isdnl1.c:21:12: warning: symbol 'l1_revision' was not declared. Should it be static?
  drivers/isdn/hisax/isdnl2.c:22:12: warning: symbol 'l2_revision' was not declared. Should it be static?
  drivers/isdn/hisax/isdnl3.c:22:12: warning: symbol 'l3_revision' was not declared. Should it be static?
  drivers/isdn/hisax/tei.c:23:12: warning: symbol 'tei_revision' was not declared. Should it be static?

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 01:00:42 -08:00