Commit graph

691,473 commits

Author SHA1 Message Date
Ingo Molnar
95f66b3770 Merge branch 'x86/asm' into x86/mm 2009-02-25 08:27:46 +01:00
Pablo Neira Ayuso
1ce85fe402 netlink: change nlmsg_notify() return value logic
This patch changes the return value of nlmsg_notify() as follows:

If NETLINK_BROADCAST_ERROR is set by any of the listeners and
an error in the delivery happened, return the broadcast error;
else if there are no listeners apart from the socket that
requested a change with the echo flag, return the result of the
unicast notification. Thus, with this patch, the unicast
notification is handled in the same way of a broadcast listener
that has set the NETLINK_BROADCAST_ERROR socket flag.

This patch is useful in case that the caller of nlmsg_notify()
wants to know the result of the delivery of a netlink notification
(including the broadcast delivery) and take any action in case
that the delivery failed. For example, ctnetlink can drop packets
if the event delivery failed to provide reliable logging and
state-synchronization at the cost of dropping packets.

This patch also modifies the rtnetlink code to ignore the return
value of rtnl_notify() in all callers. The function rtnl_notify()
(before this patch) returned the error of the unicast notification
which makes rtnl_set_sk_err() reports errors to all listeners. This
is not of any help since the origin of the change (the socket that
requested the echoing) notices the ENOBUFS error if the notification
fails and should resync itself.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:18:28 -08:00
Lennert Buytenhek
4fb0a54a55 mv643xx_eth: set sane default receive coalescing timeout
A receive coalescing timeout of 250 usec appears to strike a good
balance between allowing enough received frames to be aggregated for
LRO to do its job and not allowing the connection to stall due to
delaying ACKs to the remote end for too long.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:17:22 -08:00
Lennert Buytenhek
a5fe361653 mv643xx_eth: move a couple of init actions from ->open() to port probe
Move the netif_carrier_off() call in ->open() to port probe, so that
ethtool doesn't report the link as being up before we have up'd the
interface.

Move initialisation of the rx/tx coalescing timers from ->open() to
port probe, so that we don't reset the coalescing timers every time
the interface is up'd.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:17:22 -08:00
Lennert Buytenhek
ea8a864263 mv643xx_eth: convert to net_device_ops
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:17:21 -08:00
Lennert Buytenhek
ab307a3983 mv643xx_eth: make LRO unconditional
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-24 23:17:21 -08:00
David Rientjes
c0bdb232b2 slub: rename calculate_min_partial() to set_min_partial()
As suggested by Christoph Lameter, rename calculate_min_partial() to
set_min_partial() as the function doesn't really do any calculations.

Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-02-25 09:16:35 +02:00
Alexander Clouter
75bb6b9aab [ARM] orion5x: ts78xx add NAND support via plat_nand
ts78xx add NAND support via plat_nand

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@cam.org>
2009-02-25 00:00:47 -05:00
Alexander Clouter
673492a800 [ARM] orion5x: ts78xx amend RTC registering to not depend on ifdef's
amend RTC registering to not depend on ifdef's

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@cam.org>
2009-02-25 00:00:14 -05:00
Alexander Clouter
f5273fa310 [ARM] orion5x: ts78xx make more bulletproof the RTC load/unload code
Added checks to the platform_device_(register|add) calls so that if
a device failed to load it would then not later be unloaded; also
added the hooks so that it would not try to unload when the RTC
driver support is compiled out.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@cam.org>
2009-02-24 23:59:33 -05:00
Dave Airlie
e08fb4f6d1 drm/i915: convert DRM_ERROR to DRM_DEBUG in phys object pwrite path
This snuck in when I wrote phys object support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-25 14:52:30 +10:00
Dave Airlie
dd0910b3c7 drm/i915: make hw page ioremap use ioremap_wc
However we still have another issue with ioremap_wc not falling back
properly or somehow doing something else stupid, this probably needs
to be tracked down.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-25 14:49:21 +10:00
Kyle McMartin
d61e7380b4 drm: edid revision 0 is valid
edid->revision == 0 should be valid (at least, so the error message
indicates. :) and wikipedia seems to indicate that EDID 1.0 existed.

We can dump the entire check, since edid->revision is a u8, so
it can't ever be less than 0.

Marko reports in RH bz#476735 that his monitor claims to be
EDID 1.0, and therefore hits the check and is stuck at 800x600 because
of it.

Reported-by: Marko Ristola <marko.ristola@kolumbus.fi>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:47:05 +10:00
Chris Wilson
b3f5e7329d drm: Correct unbalanced drm_vblank_put() during mode setting.
The first time we install a mode, the vblank will be disabled for a pipe
and so drm_vblank_get() in drm_vblank_pre_modeset() will fail. As we
unconditionally call drm_vblank_put() afterwards, the vblank reference
counter becomes unbalanced.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:45:50 +10:00
Jesse Barnes
7bec756c74 drm: disable encoders before re-routing them
In some cases we may receive a mode config that has a different
CRTC<->encoder map that the current configuration.  In that case, we
need to disable any re-routed encoders before setting the mode,
otherwise they may not pick up the new CRTC (if the output types are
incompatible for example).

Tested-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:42:23 +10:00
Jesse Barnes
fe56cf45f9 drm: Fix ordering of bit fields in EDID structure leading huge vsync values.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:11:00 +10:00
Linus Torvalds
c8766ac593 drm: Fix shifts of EDID vsync offset/width fields.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:10:55 +10:00
Jesse Barnes
37df96736b drm/i915: handle bogus VBT panel timing
We've seen cases in the wild where the VBT sync data is wrong, so add
some code to fix it up in that case, taking care to make sure that the
total is greater than the sync end.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:10:42 +10:00
Jesse Barnes
7c04d1d97a drm/i915: remove PLL debugging messages
These are normal; we walk through different values looking for the right
one, so why flood the screen with messages?

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:10:39 +10:00
Matthew Garrett
eb3092cee7 [CPUFREQ] Make cpufreq-nforce2 less obnoxious
Not owning an nforce2 is a sign of good taste, not an error.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:32 -05:00
Matthias-Christian Ott
199785eac8 [CPUFREQ] p4-clockmod reports wrong frequency.
http://bugzilla.kernel.org/show_bug.cgi?id=10968

[ Updated for current tree, and fixed compile failure
  when p4-clockmod was built modular -- davej]

From: Matthias-Christian Ott <ott@mirix.org>
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:32 -05:00
Dave Jones
0cb8bc2560 [CPUFREQ] powernow-k8: Use a common exit path.
a0abd520fd introduced a slew of
extra kfree/return -ENODEV pairs. This replaces them all
with gotos.

Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:32 -05:00
Matthew Garrett
de3ed81d74 [CPUFREQ] Change link order of x86 cpufreq modules
Change the link order of the cpufreq modules to ensure that they're
probed in the preferred order when statically linked in.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:32 -05:00
Alexander Clouter
a75603a084 [CPUFREQ] conservative: remove 10x from def_sampling_rate
AMD users get particular hit by this issue (bug 8081) as it caps at
typically 90 seconds as the minimum period for a frequency change.
Harsh eh?  Years ago I borked this buy puting the 10x in the wrong
place...I fix that by removing it altogether.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:32 -05:00
Alexander Clouter
8e677ce83b [CPUFREQ] conservative: fixup governor to function more like ondemand logic
As conservative is based off ondemand the codebases occasionally need to be
resync'd.  This patch, although ugly, does this.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:32 -05:00
Alexander Clouter
f407a08bb7 [CPUFREQ] conservative: fix dbs_cpufreq_notifier so freq is not locked
When someone added the dbs_cpufreq_notifier section to the governor the
code ended up causing the frequency to only fall.  This is because
requested_freq is tinkered with and that should only modified if it has
an invlaid value due to changes in the available frequency ranges

This should fix #10055.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:32 -05:00
Alexander Clouter
11a80a9c76 [CPUFREQ] conservative: amend author's email address
Amend author's email address.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:31 -05:00
Dave Jones
91420220d2 [CPUFREQ] Use swap() in longhaul.c
Remove hand-coded implementation of swap()

Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:31 -05:00
Dave Jones
3a58df35a6 [CPUFREQ] checkpatch cleanups for acpi-cpufreq
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:31 -05:00
Thomas Renninger
79cc56af9f [CPUFREQ] powernow-k8: Only print error message once, not per core.
This is the typical message you get if you plug in a CPU
which is newer than your BIOS. It's annoying seeing this
message for each core.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:31 -05:00
Thomas Renninger
112124ab0a [CPUFREQ] ondemand/conservative: sanitize sampling_rate restrictions
Limit sampling rate to transition_latency * 100 or kernel limits.
If sampling_rate is tried to be set too low, set the lowest allowed value.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:31 -05:00
Thomas Renninger
9411b4ef7f [CPUFREQ] ondemand/conservative: deprecate sampling_rate{min,max}
The same info can be obtained via the transition_latency sysfs file

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:31 -05:00
Thomas Renninger
57f4fa6991 [CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI support
powernow-k8 driver should always try to get cpufreq info from ACPI.
Otherwise it will not be able to detect the transition latency correctly
which results in ondemand governor taking a wrong sampling rate which will
then result in sever performance loss.

Let the user not shoot himself in the foot and always compile in ACPI
support for powernow-k8.

This also fixes a wrong message if ACPI_PROCESSOR is compiled as a module and
#ifndef CONFIG_ACPI_PROCESSOR
path is chosen.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:31 -05:00
Thomas Renninger
ed12978453 [CPUFREQ] Introduce /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_transition_latency
It's not only useful for the ondemand and conservative governors, but
also for userspace daemons to know about the HW transition latency of
the CPU.
It is especially useful for userspace to know about this value when
the ondemand or conservative governors are run. The sampling rate
control value depends on it and for userspace being able to set sane
tuning values there it has to know about the transition latency.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:31 -05:00
Dave Jones
0e64a0c982 [CPUFREQ] checkpatch cleanups for powernow-k8
This driver has so many long function names, and deep nested if's
The remaining warnings will need some code restructuring to clean up.

Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:30 -05:00
Dave Jones
2b03f891ad [CPUFREQ] checkpatch cleanups for ondemand governor.
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:30 -05:00
Dave Jones
b9e7638a30 [CPUFREQ] checkpatch cleanups for powernow-k7
The asm/timer.h warning can be ignored, it's needed for
recalibrate_cpu_khz()

Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:30 -05:00
Dave Jones
bbfebd6655 [CPUFREQ] checkpatch cleanups for speedstep related drivers.
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:30 -05:00
Dave Jones
97acec55de [CPUFREQ] checkpatch cleanups for freq_table
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:30 -05:00
Dave Jones
1bceb8d139 [CPUFREQ] checkpatch cleanups for userspace governor
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:30 -05:00
Dave Jones
0a829c5afd [CPUFREQ] checkpatch cleanups for cpufreq_stats
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:30 -05:00
Dave Jones
9acef48756 [CPUFREQ] checkpatch cleanups for conservative governor
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:29 -05:00
Dave Jones
29464f2813 [CPUFREQ] checkpatch cleanups for cpufreq core
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:29 -05:00
Dave Jones
6072ace436 [CPUFREQ] checkpatch cleanups for sc520
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:29 -05:00
Dave Jones
14a6650f13 [CPUFREQ] checkpatch cleanups for powernow-k6
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:29 -05:00
Dave Jones
48ee923a66 [CPUFREQ] checkpatch cleanups for longrun
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:29 -05:00
Dave Jones
ac617bd0f7 [CPUFREQ] checkpatch cleanups for longhaul
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:29 -05:00
Dave Jones
00f6a235bf [CPUFREQ] checkpatch cleanups for gx-suspmod
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:29 -05:00
Dave Jones
c9b8c87152 [CPUFREQ] checkpatch cleanups for e_powersaver
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:28 -05:00
Dave Jones
04cd1a99dc [CPUFREQ] checkpatch cleanups for elanfreq
The remaining warning about the simple_strtoul conversion
to strict_strtoul seems kind of pointless to me.

Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-24 22:47:28 -05:00