While running a compile on arm64, I hit a memory exposure
usercopy: kernel memory exposure attempt detected from fffffc0000f3b1a8 (buffer_head) (1 bytes)
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:75!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in: ip6t_rpfilter ip6t_REJECT
nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_broute bridge stp
llc ebtable_nat ip6table_security ip6table_raw ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle
iptable_security iptable_raw iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle
ebtable_filter ebtables ip6table_filter ip6_tables vfat fat xgene_edac
xgene_enet edac_core i2c_xgene_slimpro i2c_core at803x realtek xgene_dma
mdio_xgene gpio_dwapb gpio_xgene_sb xgene_rng mailbox_xgene_slimpro nfsd
auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sdhci_of_arasan
sdhci_pltfm sdhci mmc_core xhci_plat_hcd gpio_keys
CPU: 0 PID: 19744 Comm: updatedb Tainted: G W 4.8.0-rc3-threadinfo+ #1
Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.12 Aug 12 2016
task: fffffe03df944c00 task.stack: fffffe00d128c000
PC is at __check_object_size+0x70/0x3f0
LR is at __check_object_size+0x70/0x3f0
...
[<fffffc00082b4280>] __check_object_size+0x70/0x3f0
[<fffffc00082cdc30>] filldir64+0x158/0x1a0
[<fffffc0000f327e8>] __fat_readdir+0x4a0/0x558 [fat]
[<fffffc0000f328d4>] fat_readdir+0x34/0x40 [fat]
[<fffffc00082cd8f8>] iterate_dir+0x190/0x1e0
[<fffffc00082cde58>] SyS_getdents64+0x88/0x120
[<fffffc0008082c70>] el0_svc_naked+0x24/0x28
fffffc0000f3b1a8 is a module address. Modules may have compiled in
strings which could get copied to userspace. In this instance, it
looks like "." which matches with a size of 1 byte. Extend the
is_vmalloc_addr check to be is_vmalloc_or_module_addr to cover
all possible cases.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
With the following commit:
e18bcccd1a ("x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder")
The task pointer argument to show_stack_log_lvl() in show_stack() was
inadvertently changed to 'current'.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: byungchul.park@lge.com
Cc: fweisbec@gmail.com
Cc: keescook@chromium.org
Cc: linux-tip-commits@vger.kernel.org
Cc: luto@amacapital.net
Cc: nilayvaish@gmail.com
Cc: rostedt@goodmis.org
Cc: tip-bot for Josh Poimboeuf <tipbot@zytor.com>
Fixes: e18bcccd1a ("x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder")
Link: http://lkml.kernel.org/r/20160920155340.yhewlx7vmgmov5fb@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Support event group view with hierarchy mode in 'perf top' and 'perf report'
(Namhyung Kim)
e.g.:
$ perf record -e '{cycles,instructions}' make
$ perf report --hierarchy --stdio
...
# Overhead Command / Shared Object / Symbol
# ...................... ..................................
...
25.74% 27.18% sh
19.96% 24.14% libc-2.24.so
9.55% 14.64% [.] __strcmp_sse2
1.54% 0.00% [.] __tfind
1.07% 1.13% [.] _int_malloc
0.95% 0.00% [.] __strchr_sse2
0.89% 1.39% [.] __tsearch
0.76% 0.00% [.] strlen
- Fix the dwarf regs table for x86_64, adding a missing % to the "%di"
register, noticed with a failing 'perf test bpf' (Arnaldo Carvalho de Melo)
- Fix handling of mmap parameters in the 'perf trace' beautifier in
architectures that don't have the same mappings as x86_64 (Wang Nan)
- Handle hugetbl mappings in older systems running new kernels (Wang Nan)
- Resolve 'call' operands in 'annotate', that when using /proc/kcore
were appearing just as hexadecimal addresses, to function names
(Arnaldo Carvalho de Melo)
- Fix width computation for srcline sort entry (Jiri Olsa)
- Do not ignore call instruction with indirect target in 'annotate'
(Ravi Bangoria)
- Handle MADV_FREE in the madvise 'trace' beautifier (Wang Nan)
- Fix build of 'perf trace' mman beautifier in !x86_64 (Wang Nan)
Infrastructure:
- Add infrastructure for PMU specific configuration, allowing to pass
config variables directly to the kernel PMU driver, prefixing those
variables with a '@', part of a larger series to support Coresight (Mathieu Poirier)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4bBB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160920' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Support event group view with hierarchy mode in 'perf top' and 'perf report'
(Namhyung Kim)
e.g.:
$ perf record -e '{cycles,instructions}' make
$ perf report --hierarchy --stdio
...
# Overhead Command / Shared Object / Symbol
# ...................... ..................................
...
25.74% 27.18% sh
19.96% 24.14% libc-2.24.so
9.55% 14.64% [.] __strcmp_sse2
1.54% 0.00% [.] __tfind
1.07% 1.13% [.] _int_malloc
0.95% 0.00% [.] __strchr_sse2
0.89% 1.39% [.] __tsearch
0.76% 0.00% [.] strlen
- Fix the dwarf regs table for x86_64, adding a missing % to the "%di"
register, noticed with a failing 'perf test bpf' (Arnaldo Carvalho de Melo)
- Fix handling of mmap parameters in the 'perf trace' beautifier in
architectures that don't have the same mappings as x86_64 (Wang Nan)
- Handle hugetbl mappings in older systems running new kernels (Wang Nan)
- Resolve 'call' operands in 'annotate', that when using /proc/kcore
were appearing just as hexadecimal addresses, to function names
(Arnaldo Carvalho de Melo)
- Fix width computation for srcline sort entry (Jiri Olsa)
- Do not ignore call instruction with indirect target in 'annotate'
(Ravi Bangoria)
- Handle MADV_FREE in the madvise 'trace' beautifier (Wang Nan)
- Fix build of 'perf trace' mman beautifier in !x86_64 (Wang Nan)
Infrastructure changes:
- Add infrastructure for PMU specific configuration, allowing to pass
config variables directly to the kernel PMU driver, prefixing those
variables with a '@', part of a larger series to support Coresight (Mathieu Poirier)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cpu_has_counter macro indicates whether the current CPU has a
working coprocessor 0 count & compare registers, and has no bearing on
the GIC. Stop checking it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/20160913165644.627-2-paul.burton@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We've checked for errors from setup_irq_percpu since commit f95ac8558b
("CLOCKSOURCE: mips-gic: Add missing error returns checks") but didn't
print an error message in the failure case. This makes it very easy to
overlook the GIC timer clock event driver not being registered, since
we'll generally just use a different clock event driver if that happens.
Print an error if IRQ setup fails in order to make such problems harder
to miss (ie. not completely silent).
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/20160913165644.627-1-paul.burton@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The MIPS GIC driver has previously iterated over bits set in a bitmap
representing pending local IRQs by calling find_first_bit, clearing that
bit then calling find_first_bit again until all bits are clear. If
multiple interrupts are pending then this is wasteful, as find_first_bit
will have to loop over the whole bitmap from the start. Use the
for_each_set_bit macro which performs exactly what we need here instead.
It will use find_next_bit and thus only scan over the relevant part of
the bitmap, and it makes the intent of the code clearer.
This makes the same change for local interrupts that commit cae750bae4
("irqchip: mips-gic: Use for_each_set_bit to iterate over IRQs") made
for shared interrupts.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/20160913165427.31686-1-paul.burton@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since the device hierarchy domain was added by commit c98c1822ee
("irqchip/mips-gic: Add device hierarchy domain"), GIC local interrupts
have been broken.
Users attempting to setup a per-cpu local IRQ, for example the GIC timer
clock events code in drivers/clocksource/mips-gic-timer.c, the
setup_percpu_irq function would refuse with -EINVAL because the GIC
irqchip driver never called irq_set_percpu_devid so the
IRQ_PER_CPU_DEVID flag was never set for the IRQ. This happens because
irq_set_percpu_devid was being called from the gic_irq_domain_map
function which is no longer called.
Doing only that runs into further problems because gic_dev_domain_alloc
set the struct irq_chip for all interrupts, local or shared, to
gic_level_irq_controller despite that only being suitable for shared
interrupts. The typical outcome of this is that gic_level_irq_controller
callback functions are called for local interrupts, and then hwirq
number calculations overflow & the driver ends up attempting to access
some invalid register with an address calculated from an invalid hwirq
number. Best case scenario is that this then leads to a bus error. This
is fixed by abstracting the setup of the hwirq & chip to a new function
gic_setup_dev_chip which is used by both the root GIC IRQ domain & the
device domain.
Finally, decoding local interrupts failed because gic_dev_domain_alloc
only called irq_domain_alloc_irqs_parent for shared interrupts. Local
ones were therefore never associated with hwirqs in the root GIC IRQ
domain and the virq in gic_handle_local_int would always be 0. This is
fixed by calling irq_domain_alloc_irqs_parent unconditionally & having
gic_irq_domain_alloc handle both local & shared interrupts, which is
easy due to the aforementioned abstraction of chip setup into
gic_setup_dev_chip.
This fixes use of the MIPS GIC timer for clock events, which has been
broken since c98c1822ee ("irqchip/mips-gic: Add device hierarchy
domain") but hadn't been noticed due to a silent fallback to the MIPS
coprocessor 0 count/compare clock events device.
Fixes: c98c1822ee ("irqchip/mips-gic: Add device hierarchy domain")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20160913165335.31389-1-paul.burton@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We hit hardened usercopy feature check for kernel text access by reading
kcore file:
usercopy: kernel memory exposure attempt detected from ffffffff8179a01f (<kernel text>) (4065 bytes)
kernel BUG at mm/usercopy.c:75!
Bypassing this check for kcore by adding bounce buffer for ktext data.
Reported-by: Steve Best <sbest@redhat.com>
Fixes: f5509cc18d ("mm: Hardened usercopy")
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Next patch adds bounce buffer for ktext area, so it's
convenient to have single bounce buffer for both
vmalloc/module and ktext cases.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fsl-dcu fixes.
* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: disable clock on error path
drm/fsl-dcu: use PTR_ERR_OR_ZERO() to simplify the code
drm/fsl-dcu: fix endian issue when using clk_register_divider
Replacing dma_pool_alloc and memset with a single call to dma_pool_zalloc
Signed-off-by: Harman Kalra <harman4linux@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently the AER severity is calculated by calling cper_severity_to_aer(),
but the parameter sent is actually the GHES severity. This causes the AER
severity to be incorrect.
Fix the parameter to be the CPER severity instead of the GHES severity.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Currently the AER severity is being translated twice in the code flow for
PCIe errors. It is first translated in ghes_do_proc() before calling into
the AER driver. Then it is translated again when the AER driver calls
cper_print_aer(). This causes the severity that is used in
cper_print_aer() to be incorrect.
Remove the second translation that is in cper_print_aer() since this
function is already receiving the correct AER severity.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
The dso__read_binary_type_filename gets the dso's file name to open. We
need to check it for regular file before trying to open it, otherwise we
might get stuck with device file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160920161245.GA8995@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stdio and tui has same code to reset hpp format column width.
Factor it out as a new function.
Suggested-and-Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160920053025.13989-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move mic/mpssd examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build mic/mpssd. It can be built
from top level directory or from mic/mpssd directory:
Run make -C samples/mic/mpssd or cd samples/mic/mpssd; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
And here's another nitpick ;-)
Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Fixes: b118c6a6ff ("ARM: dts: Add power button support for igepv5")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
It should be GPIO_ACTIVE_LOW instead of GPIO_ACTIVE_HIGH as
pointed out by Pau Pajuel <ppajuel@gmail.com>.
Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Fixes: b118c6a6ff ("ARM: dts: Add power button support for igepv5")
Signed-off-by: Tony Lindgren <tony@atomide.com>
The attached patch describes the current implementation of
copy_user_page_asm(). It is possible to implement this routine using
either the kernel page mappings or equivalent aliases. I tested both
and decided the former was more efficient.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
This driver provides no .reg_defaults_raw in regmap_config, so
the .num_reg_defaults_raw is useless, and, in fact harmful. It
triggers kernel crash in regmap_init which tries to access the
register defaults.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Same as commit ce492b3b8f
Subject: drm/fsl-dcu: use flat regmap cache
Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2871 lockdep_trace_alloc+0x104/0x128
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the driver uses MMIO, the regmap bus of type regmap_mmio
is being used which has fast_io set to true.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Same as commit ce492b3b8f
Subject: drm/fsl-dcu: use flat regmap cache
Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2871 lockdep_trace_alloc+0x104/0x128
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the driver uses MMIO, the regmap bus of type regmap_mmio
is being used which has fast_io set to true.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Same as commit ce492b3b8f
Subject: drm/fsl-dcu: use flat regmap cache
Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2871 lockdep_trace_alloc+0x104/0x128
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the driver uses MMIO, the regmap bus of type regmap_mmio
is being used which has fast_io set to true.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Same as commit ce492b3b8f
Subject: drm/fsl-dcu: use flat regmap cache
Using flat regmap cache instead of RB-tree to avoid the following
lockdep warning on driver load:
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2871 lockdep_trace_alloc+0x104/0x128
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first
writes. However, allocations in an atomic context (e.g. when a
spinlock is held) are not allowed. The function regmap_write
calls map->lock, which acquires a spinlock in the fast_io case.
Since the driver uses MMIO, the regmap bus of type regmap_mmio
is being used which has fast_io set to true.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
* Replace the specification of a data type by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Check return value of smp_boot_one_cpu() whether CPU could be brought up.
Reported-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
PARISC was the only architecture which selected the BROKEN_RODATA config
option. Drop it and remove the special handling from init.h as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Remove networking from Documentation Makefile to move the test to
selftests. Update networking/timestamping Makefile to work under
selftests. These tests will not be run as part of selftests suite
and will not be included in install targets. They can be built and
run separately for now.
This is part of the effort to move runnable code from Documentation.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove watchdog-test from Makefile to move the test to selftests.
Add Makefile and .gitignore for watchdog-test. watchdog-test will
not be run as part of selftests suite and will not be included in
install targets. It can be built separately for now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove ia64 from Makefile to move the test to selftests.
Update ia64 Makefile to work under selftests. ia64 will not be run as part
of selftests suite and will not be included in install targets. They can be
built separately for now.
The original Makefile built this test on all archirectures and this update
doesn't change that.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove vDSO from Makefile to move the to selftests. Update vDSO Makefile
to work under selftests. vDSO will not be run as part of selftests suite
and will not be included in install targets. They can be built separately
for now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove ptp from Makefile to move the test to selftests. Update ptp Makefile
to work under selftests. ptp will not be run as part of selftests suite and
will not be included in install targets. They can be built separately for
now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Before this patch the '_raw_spin_lock_irqsave' and 'update_rq_clock' operands
were appearing just as hexadecimal numbers:
update_blocked_averages /proc/kcore
│ push %r12
│ push %rbx
│ and $0xfffffffffffffff0,%rsp
│ sub $0x40,%rsp
│ add -0x662cac00(,%rdi,8),%rax
│ mov %rax,%rbx
│ mov %rax,%rdi
│ mov %rax,0x38(%rsp)
│ → callq _raw_spin_lock_irqsave
│ mov %rbx,%rdi
│ mov %rax,0x30(%rsp)
│ → callq update_rq_clock
│ mov 0x8d0(%rbx),%rax
│ lea 0x8d0(%rbx),%r11
To check that all is right one can always use the 'o' hotkey and see
the original objdump -dS output, that for this case is:
update_blocked_averages /proc/kcore
│ffffffff990d5489: push %r12
│ffffffff990d548b: push %rbx
│ffffffff990d548c: and $0xfffffffffffffff0,%rsp
│ffffffff990d5490: sub $0x40,%rsp
│ffffffff990d5494: add -0x662cac00(,%rdi,8),%rax
│ffffffff990d549c: mov %rax,%rbx
│ffffffff990d549f: mov %rax,%rdi
│ffffffff990d54a2: mov %rax,0x38(%rsp)
│ffffffff990d54a7: → callq 0xffffffff997eb7a0
│ffffffff990d54ac: mov %rbx,%rdi
│ffffffff990d54af: mov %rax,0x30(%rsp)
│ffffffff990d54b4: → callq 0xffffffff990c7720
│ffffffff990d54b9: mov 0x8d0(%rbx),%rax
│ffffffff990d54c0: lea 0x8d0(%rbx),%r11
Use the 'h' hotkey to see a list of available hotkeys.
More work needed to cover operands for other instructions, such as 'mov',
that can resolve variable names, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xqgtw9mzmzcjgwkis9kiiv1p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that things like:
→ callq 0xffffffff993e3230
found while disassembling /proc/kcore can be beautified by later
patches, that will resolve that address to a function, looking it up in
/proc/kallsyms.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-p76myuke4j7gplg54amaklxk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not ignore call instruction with indirect target when its already
identified as a call. This is an extension of commit e8ea156195 ("perf
annotate: Use raw form for register indirect call instructions") to
generalize annotation for all instructions with indirect calls.
This is needed for certain powerpc call instructions that use address in
a register (such as bctrl, btarl, ...).
Apart from that, when kcore is used to disassemble function, all call
instructions were ignored. This patch will fix it as a side effect by
not ignoring them. For example,
Before (with kcore):
mov %r13,%rdi
callq 0xffffffff811a7e70
^ jmpq 64
mov %gs:0x7ef41a6e(%rip),%al
After (with kcore):
mov %r13,%rdi
> callq 0xffffffff811a7e70
^ jmpq 64
mov %gs:0x7ef41a6e(%rip),%al
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
[Suggested about 'bctrl' instruction]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1471611578-11255-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding header size to width computation for srcline sort entry,
because it's possible to get empty data with ':0' which set width
of 2 which is lower than width needed to display column header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474290610-23241-62-git-send-email-jolsa@kernel.org
[ Added declaration to sort.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move prctl tests from Documentation/prctl to selftests/prctl.
Remove prctl from Makefile to move the test. Update prctl Makefile to work
under selftests. prctl will not be run as part of selftests suite and will
not be included in install targets. They can be built separately for now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move dnotify_test.c, Makefile, and .gitignore from Documentation/filesystems
to selftests/filesystems.
Remove filesystems build target from Documentation/Makefile and update
selftests/filesystems/Makefile to work under selftests. dnotify_test will
not be run as part of selftests suite and will not be included in install
targets. It can be built separately for now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
In order to work, the 'err' return value has to be updated otherwise the
test can never be true.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Since commit ce1ed9f98e
("zram: delete custom lzo/lz4")
we need CONFIG_CRYPTO_LZ4=y instead of
CONFIG_ZRAM_LZ4_COMPRESS
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The function cpufreq_register_driver() returns zero on success and since
commit 27622b061e ("cpufreq: Convert to hotplug state machine")
erroneously a positive number. Due to the "if (x) assume_error" construct
all callers assumed an error and as a consequence the cpu freq kworker
crashes with a NULL pointer dereference.
Reset the return value back to zero in the success case.
Fixes: 27622b061e ("cpufreq: Convert to hotplug state machine")
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-and-tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: peterz@infradead.org
Cc: rjw@rjwysocki.net
Link: http://lkml.kernel.org/r/20160920145628.lp2bmq72ip3oiash@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
new EFI memory map reservation code didn't align reservations to
EFI_PAGE_SIZE boundaries causing bogus regions to be inserted into
the global EFI memory map - Matt Fleming
-----BEGIN PGP SIGNATURE-----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=S9gJ
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/core
Pull EFI fix from Matt Fleming:
* Fix a boot crash reported by Mike Galbraith and Mike Krinkin. The
new EFI memory map reservation code didn't align reservations to
EFI_PAGE_SIZE boundaries causing bogus regions to be inserted into
the global EFI memory map (Matt Fleming)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Suggested patch solves two issues:
1) Currently documentation is unclear whether `make kselftest` should
be run before or after kernel was installed and booted. `make help`
gives a clear answer on that: "kselftest - Build and run kernel selftest
(run as root). Build, install, and boot kernel before running kselftest
on it."
2) Documentation states that `make kselftest` executes "unit" tests.
Technically it's not a _unit_ test if it requires to install an
application first. It's either integration or system test. To not to
confuse a user I suggest not to use a word "unit".
Signed-off-by: Aleksander Alekseev <afiskon@devzen.ru>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
by type conversion errors in the x86 pat code - Matt Fleming
-----BEGIN PGP SIGNATURE-----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=qMBL
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/urgent
Pull EFI fixes from Matt Fleming:
* Fix a boot hang on large memory machines (multiple terabyte) caused
by type conversion errors in the x86 PAT code (Matt Fleming)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I2C and SPI interfaces share common clock trees within the CP110 HW block.
It occurred that SPI0 interface has wrong clock assignment in the device
tree, which is fixed in this commit to a proper value.
Fixes: 728dacc7f4 ("arm64: dts: marvell: initial DT description of ...")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
CC: <stable@vger.kernel.org> v4.7+
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Mike Galbraith reported that his machine started rebooting during boot
after,
commit 8e80632fb2 ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()")
The ESRT table on his machine is 56 bytes and at no point in the
efi_arch_mem_reserve() call path is that size rounded up to
EFI_PAGE_SIZE, nor is the start address on an EFI_PAGE_SIZE boundary.
Since the EFI memory map only deals with whole pages, inserting an EFI
memory region with 56 bytes results in a new entry covering zero
pages, and completely screws up the calculations for the old regions
that were trimmed.
Round all sizes upwards, and start addresses downwards, to the nearest
EFI_PAGE_SIZE boundary.
Additionally, efi_memmap_insert() expects the mem::range::end value to
be one less than the end address for the region.
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Tested-by: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
