The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
This patch only reserves two CPU hotplug states for block/mq so the block tree
can apply the conversion patches.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160906170457.32393-20-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Correct drop handling for XDP_TX on TX failure, were recently added in
commit 95357907ae ("mlx4: fix XDP_TX is acting like XDP_PASS on TX
ring full").
The change missed an opportunity for recycling the RX page, instead of
going through the page allocator, like the regular XDP_DROP action does.
This patch cease the opportunity, by going through the XDP_DROP case.
Fixes: 95357907ae ("mlx4: fix XDP_TX is acting like XDP_PASS on TX ring full")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fe56b9e6a8 ("qed: Add module with basic common support")
has introduced a stack corruption during probe, where filling a
local struct with data to be sent to management firmware is incorrectly
filled; The data is written outside of the struct and corrupts
the stack.
Changes from v1:
----------------
- Correct the value written [Caught by David Laight]
Fixes: fe56b9e6a8 ("qed: Add module with basic common support")
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin says:
====================
net-next: dsa: set_addr should be optional
The Marvell driver is the only one that actually sets the switches HW
address. All other drivers have an empty stub. fix this by making the
callback optional.
====================
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The set_addr() callback is now optional. Remove the empty stub that qca8k
has.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The set_addr() callback is now optional. Remove the empty stub that b53
has.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only 1 of the 3 drivers currently has a set_addr() operation. Make the
set_addr() callback optional to reduce the amount of empty stubs inside
the drivers.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 83c0afaec7 ("net: dsa: Add new binding implementation")
has a duplicate invocation of the set_addr() operation callback. Remove one
of them.
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu says:
====================
rhashtable: rhashtable with duplicate objects
v3 fixes a bug in the remove path that causes the element count
to decrease when it shouldn't, leading to a gigantic hash table
when it underflows.
v2 contains a reworked insertion slowpath to ensure that the
spinlock for the table we're inserting into is taken.
This series contains two patches. The first adds the rhlist
interface and the second converts mac80211 to use it. If this
works out I'll then proceed to convert the other insecure_elasticity
users over to this.
I've tested the rhlist code with test_rhashtable but I haven't
tested the mac80211 conversion. So please give it a go and see
if it still works.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mac80211 currently uses rhashtable with insecure_elasticity set
to true. The latter is because of duplicate objects. What's
more, mac80211 walks the rhashtable chains by hand which is broken
as rhashtable may contain multiple tables due to resizing or
rehashing.
This patch fixes it by converting it to the newly added rhltable
interface which is designed for use with duplicate objects.
With rhltable a lookup returns a list of objects instead of a
single one. This is then fed into the existing for_each_sta_info
macro.
This patch also deletes the sta_addr_hash function since rhashtable
defaults to jhash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The insecure_elasticity setting is an ugly wart brought out by
users who need to insert duplicate objects (that is, distinct
objects with identical keys) into the same table.
In fact, those users have a much bigger problem. Once those
duplicate objects are inserted, they don't have an interface to
find them (unless you count the walker interface which walks
over the entire table).
Some users have resorted to doing a manual walk over the hash
table which is of course broken because they don't handle the
potential existence of multiple hash tables. The result is that
they will break sporadically when they encounter a hash table
resize/rehash.
This patch provides a way out for those users, at the expense
of an extra pointer per object. Essentially each object is now
a list of objects carrying the same key. The hash table will
only see the lists so nothing changes as far as rhashtable is
concerned.
To use this new interface, you need to insert a struct rhlist_head
into your objects instead of struct rhash_head. While the hash
table is unchanged, for type-safety you'll need to use struct
rhltable instead of struct rhashtable. All the existing interfaces
have been duplicated for rhlist, including the hash table walker.
One missing feature is nulls marking because AFAIK the only potential
user of it does not need duplicate objects. Should anyone need
this it shouldn't be too hard to add.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Small packet loss is reported on complex multi host network configurations
including tunnels, NAT, ... My investigation led me to the following check
in netback which drops packets:
if (unlikely(txreq.size < ETH_HLEN)) {
netdev_err(queue->vif->dev,
"Bad packet size: %d\n", txreq.size);
xenvif_tx_err(queue, &txreq, extra_count, idx);
break;
}
But this check itself is legitimate. SKBs consist of a linear part (which
has to have the ethernet header) and (optionally) a number of frags.
Netfront transmits the head of the linear part up to the page boundary
as the first request and all the rest becomes frags so when we're
reconstructing the SKB in netback we can't distinguish between original
frags and the 'tail' of the linear part. The first SKB needs to be at
least ETH_HLEN size. So in case we have an SKB with its linear part
starting too close to the page boundary the packet is lost.
I see two ways to fix the issue:
- Change the 'wire' protocol between netfront and netback to start keeping
the original SKB structure. We'll have to add a flag indicating the fact
that the particular request is a part of the original linear part and not
a frag. We'll need to know the length of the linear part to pre-allocate
memory.
- Avoid transmitting SKBs with linear parts starting too close to the page
boundary. That seems preferable short-term and shouldn't bring
significant performance degradation as such packets are rare. That's what
this patch is trying to achieve with skb_copy().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All the review comments updated and resending for review.
This is MAC interface feature.
Microsemi PHY can support RGMII, RMII or GMII/MII interface between MAC and PHY.
MAC-IF function program the right value based on Device tree configuration.
Tested on Beaglebone Black with VSC 8531 PHY.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol
'mlxsw_sp_span_entry_find' was not declared. Should it be static?
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol
'mlxsw_sp_span_entry_get' was not declared. Should it be static?
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing
different enum types
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum
mlxsw_sp_span_type versus
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum
mlxsw_reg_mpar_i_e
...
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning:
mixing different enum types
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int
enum mlxsw_reg_sbxx_dir versus
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int
enum devlink_sb_pool_type
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning:
mixing different enum types
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int
enum mlxsw_reg_sbpr_mode versus
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int
enum devlink_sb_threshold_type
...
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning:
mixing different enum types
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int
enum mlxsw_sp_l3proto versus
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int
enum mlxsw_reg_ralxx_protocol
...
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning:
symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static?
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the RX hash function from XOR to CRC in order to have better
distribution of the traffic.
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If led_trigger_set() is called with "trig" argument set to NULL, and there
is no trigger to remove then the function should return immediately so
as to avoid doing unnecessary allocation and sending uevent.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reported-by: Daniel Romell <daro@hms.se>
Acked-by Daniel Romell <daro@hms.se>
The core distributed switch architecture code currently does not have
a MAINTAINERS entry, which results in some contributions not landing
in the right peoples inbox.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_hwrm_fw_set_time() now returns -EOPNOTSUPP when built for kernel
without RTC_LIB. Setting the firmware time is not critical to the
successful completion of the firmware update process.
Signed-off-by: Rob Swindell <Rob.Swindell@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8c14586fc3 ("net: ipv6: Use passed in table for nexthop
lookups") introduced a regression: insertion of an IPv6 route in a table
not containing the appropriate connected route for the gateway but which
contained a non-connected route (like a default gateway) fails while it
was previously working:
$ ip link add eth0 type dummy
$ ip link set up dev eth0
$ ip addr add 2001:db8::1/64 dev eth0
$ ip route add ::/0 via 2001:db8::5 dev eth0 table 20
$ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
RTNETLINK answers: No route to host
$ ip -6 route show table 20
default via 2001:db8::5 dev eth0 metric 1024 pref medium
After this patch, we get:
$ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
$ ip -6 route show table 20
2001:db8:cafe::1 via 2001:db8::6 dev eth0 metric 1024 pref medium
default via 2001:db8::5 dev eth0 metric 1024 pref medium
Fixes: 8c14586fc3 ("net: ipv6: Use passed in table for nexthop lookups")
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vm_data->avic_vm_id is a u32, so the check for a error
return (less than zero) such as -EAGAIN from
avic_get_next_vm_id currently has no effect whatsoever.
Fix this by using a temporary int for the comparison
and assign vm_data->avic_vm_id to this. I used an explicit
u32 cast in the assignment to show why vm_data->avic_vm_id
cannot be used in the assign/compare steps.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lately tsc page was implemented but filled with empty
values. This patch setup tsc page scale and offset based
on vcpu tsc, tsc_khz and HV_X64_MSR_TIME_REF_COUNT value.
The valid tsc page drops HV_X64_MSR_TIME_REF_COUNT msr
reads count to zero which potentially improves performance.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Peter Hornyack <peterhornyack@google.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
[Computation of TSC page parameters rewritten to use the Linux timekeeper
parameters. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a function that reads the exact nanoseconds value that is
provided to the guest in kvmclock. This crystallizes the notion of
kvmclock as a thin veneer over a stable TSC, that the guest will
(hopefully) convert with NTP. In other words, kvmclock is *not* a
paravirtualized host-to-guest NTP.
Drop the get_kernel_ns() function, that was used both to get the base
value of the master clock and to get the current value of kvmclock.
The former use is replaced by ktime_get_boot_ns(), the latter is
the purpose of get_kernel_ns().
This also allows KVM to provide a Hyper-V time reference counter that
is synchronized with the time that is computed from the TSC page.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the guest's kvmclock count up from zero, not from the host boot
time. The guest cannot rely on that anyway because it changes on
migration, the numbers are easier on the eye and finally it matches the
desired semantics of the Hyper-V time reference counter.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will use it in the next patches for KVM_GET_CLOCK and as a basis for the
contents of the Hyper-V TSC page. Get the values from the Linux
timekeeper even if kvmclock is not enabled.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With display pixel clocks we want to have the closest possible clock
rate, to minimize timing and refresh rate skews. Whether the actual
clock rate is higher or lower than the requested rate is less important.
Also check candidates against the requested rate, rather than the
ideal parent rate, the varying dividers also influence the difference
between the requested rate and the rounded rate.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add bod to some Greybus protocol drivers maintainers, loopback and
timesync.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To increase comprehension this patch renames the channel related
spinlock with a more fitting name.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the calls to usb_unanchor_urb() from the completion
routines, since disassociation of the URBs is already handles by the
USB subsystem.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the spinlocks when accessing the usb_anchor list,
because the struct usb_anchor is using its own lock.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the propietary tracking of URBs. Instead the structure
usb_anchor of the USB subsystem is used.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given Linus is hinting (strongly!) at an rc8 this last set is hopefully in
time for the 4.9 merge window. The zpa2326 and si1145 drivers provide
fine illustrations that devices aren't getting any simpler!
I'm also particularly pleased Linus Walliej did such a thorough job of cleaning
up one of my old drivers.
New device support
* mCube MC3230 accelerometer
- new fairly minimal driver.
* Murata zpa2326
- extensive new driver supporting the rather 'novel' buffering of data this
device provides and handling both it's own data ready trigger and other
triggers rather elegantly.
* si1141, si1142, si1143, si1145, si1146 and si1147 proximity, UV, visible and
IR sensors.
- another extensive new driver supporting all the key bits of what this
set of devices supplies including dataready triggers, buffers and all the
various data channels.
Functionality
* kxsd9 - Linus brought this scratch driver I wrote in one afternoon years ago
up to date adding lots of good stuff along the way.
- SPI support after extensive rework of the driver.
- Triggered buffer capture support.
- Runtime PM.
- Regulator handling.
- Mounting matrix support.
* mma7660
- Add MODULE_DEVICE_TABLE to support autoprobing.
Cleanups
* ad5933
- Align some function arguements nicely.
* med_z188
- Constify iio_info structure.
* sca3000
- Implement IIO_CHAN_INFO_SAMP_FREQ rather than a hand rolled attr.
There are still quite a few drivers that would benefit from similar updates.
* ssp_sensors
- Constify iio_info structures in accel and gyro drivers.
-----BEGIN PGP SIGNATURE-----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=2Az/
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.9c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of new device support, functionality and cleanups for IIO in the 4.9 cycle.
Given Linus is hinting (strongly!) at an rc8 this last set is hopefully in
time for the 4.9 merge window. The zpa2326 and si1145 drivers provide
fine illustrations that devices aren't getting any simpler!
I'm also particularly pleased Linus Walliej did such a thorough job of cleaning
up one of my old drivers.
New device support
* mCube MC3230 accelerometer
- new fairly minimal driver.
* Murata zpa2326
- extensive new driver supporting the rather 'novel' buffering of data this
device provides and handling both it's own data ready trigger and other
triggers rather elegantly.
* si1141, si1142, si1143, si1145, si1146 and si1147 proximity, UV, visible and
IR sensors.
- another extensive new driver supporting all the key bits of what this
set of devices supplies including dataready triggers, buffers and all the
various data channels.
Functionality
* kxsd9 - Linus brought this scratch driver I wrote in one afternoon years ago
up to date adding lots of good stuff along the way.
- SPI support after extensive rework of the driver.
- Triggered buffer capture support.
- Runtime PM.
- Regulator handling.
- Mounting matrix support.
* mma7660
- Add MODULE_DEVICE_TABLE to support autoprobing.
Cleanups
* ad5933
- Align some function arguements nicely.
* med_z188
- Constify iio_info structure.
* sca3000
- Implement IIO_CHAN_INFO_SAMP_FREQ rather than a hand rolled attr.
There are still quite a few drivers that would benefit from similar updates.
* ssp_sensors
- Constify iio_info structures in accel and gyro drivers.
All previous users of dump_trace() have been converted to use the new
unwind interfaces, so we can remove it and the related
print_context_stack() and print_context_stack_bp() callback functions.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5b97da3572b40b5a4d8e185cf2429308d0987a13.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has
been deprecated.
show_trace_log_lvl() is special compared to other users of the unwinder.
It's the only place where both reliable *and* unreliable addresses are
needed. With frame pointers enabled, most callers of the unwinder don't
want to know about unreliable addresses. But in this case, when we're
dumping the stack to the console because something presumably went
wrong, the unreliable addresses are useful:
- They show stale data on the stack which can provide useful clues.
- If something goes wrong with the unwinder, or if frame pointers are
corrupt or missing, all the stack addresses still get shown.
So in order to show all addresses on the stack, and at the same time
figure out which addresses are reliable, we have to do the scanning and
the unwinding in parallel.
The scanning is done with the help of get_stack_info() to traverse the
stacks. The unwinding is done separately by the new unwinder.
In theory we could simplify show_trace_log_lvl() by instead pushing some
of this logic into the unwind code. But then we would need some kind of
"fake" frame logic in the unwinder which would add a lot of complexity
and wouldn't be worth it in order to support only one user.
Another benefit of this approach is that once we have a DWARF unwinder,
we should be able to just plug it in with minimal impact to this code.
Another change here is that callers of show_trace_log_lvl() don't need
to provide the 'bp' argument. The unwinder already finds the relevant
frame pointer by unwinding until it reaches the first frame after the
provided stack pointer.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The x86 stack dump code is a bit of a mess. dump_trace() uses
callbacks, and each user of it seems to have slightly different
requirements, so there are several slightly different callbacks floating
around.
Also there are some upcoming features which will need more changes to
the stack dump code, including the printing of stack pt_regs, reliable
stack detection for live patching, and a DWARF unwinder. Each of those
features would at least need more callbacks and/or callback interfaces,
resulting in a much bigger mess than what we have today.
Before doing all that, we should try to clean things up and replace
dump_trace() with something cleaner and more flexible.
The new unwinder is a simple state machine which was heavily inspired by
a suggestion from Andy Lutomirski:
https://lkml.kernel.org/r/CALCETrUbNTqaM2LRyXGRx=kVLRPeY5A3Pc6k4TtQxF320rUT=w@mail.gmail.com
It's also similar to the libunwind API:
http://www.nongnu.org/libunwind/man/libunwind(3).html
Some if its advantages:
- Simplicity: no more callback sprawl and less code duplication.
- Flexibility: it allows the caller to stop and inspect the stack state
at each step in the unwinding process.
- Modularity: the unwinder code, console stack dump code, and stack
metadata analysis code are all better separated so that changing one
of them shouldn't have much of an impact on any of the others.
Two implementations are added which conform to the new unwind interface:
- The frame pointer unwinder which is used for CONFIG_FRAME_POINTER=y.
- The "guess" unwinder which is used for CONFIG_FRAME_POINTER=n. This
isn't an "unwinder" per se. All it does is scan the stack for kernel
text addresses. But with no frame pointers, guesses are better than
nothing in most cases.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/6dc2f909c47533d213d0505f0a113e64585bec82.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fred has taken over the cxl maintenance I was doing. This updates the
MAINTAINERS file to reflect this.
It also removes a duplicate entry in the files covered and adds an entry
for the CXL PCI code in arch/powerpc.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With the addition of uses of GCC's condition code outputs in commit:
35ccfb7114 ("x86, asm: Use CC_SET()/CC_OUT() in <asm/rwsem.h>")
... there's now an overlap of outputs and clobbers in __down_write_trylock().
Such overlaps are generally getting tagged with an error (occasionally
even with an ICE). I can't really tell why plain GCC 6.2 doesn't detect
this (judging by the code it is meant to), while the slightly modified
one I use does. Since condition code clobbers are never necessary on x86
(other than perhaps for documentation purposes, which doesn't really
get done consistently), remove it altogether rather than inventing
something like CC_CLOBBER (to accompany CC_SET/CC_OUT).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/57E003CC0200007800110102@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If we fail to allocate work, we don't end up using hp_errlog_copy. Free it
in the error path.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we merge two contiguous partitions whose signatures are marked
NVRAM_SIG_FREE, We need update prev's length and checksum, then write it
to nvram, not cur's. So lets fix this mistake now.
Also use memset instead of strncpy to set the partition's name. It's
more readable if we want to fill up with duplicate chars .
Fixes: fa2b4e54d4 ("powerpc/nvram: Improve partition removal")
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If kmemdup fails, We need kfree *buff* first then return -ENOMEM.
Otherwise there is a memory leak.
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mtmsrd with L=1 only affects MSR_EE and MSR_RI bits, and we always
know what state those bits are, so the kernel MSR does not need to be
loaded when modifying them.
mtmsrd is often in the critical execution path, so avoiding dependency
on even L1 load is noticable. On a POWER8 this saves about 3 cycles
from the syscall path, and possibly a few from other exception returns
(not measured).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The mflr r10 instruction was left over from when the code used LR to
branch to system_call_entry from the exception handler. That was
changed by commit 6a404806df ("powerpc: Avoid link stack corruption in
MMU on syscall entry path") to use the count register. The value is
never used now, so mflr can be removed, and r10 can be used for storage
rather than spilling to the SPR scratch register.
The scratch register spill causes a long pipeline stall due to the SPR
read after write. This change brings getppid syscall cost from 406 to
376 cycles on POWER8. getppid for non-relocatable case is 371 cycles.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
