Commit:
5743021831 ("sched/cputime: Count actually elapsed irq & softirq time")
... fixed a bug but also triggered a regression:
On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four
CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs
on host one by one until there is only one left, then observe CPU utilization
via 'top' in the guest, it shows:
100% st for cpu0(housekeeping)
75% st for other CPUs (nohz full mode)
However, w/o this commit it shows the correct 75% for all four CPUs.
When a guest is interrupted for a longer amount of time, missed clock ticks
are not redelivered later. Because of that, we should not limit the amount
of steal time accounted to the amount of time that the calling functions
think have passed.
However, the interval returned by account_other_time() is NOT rounded down
to the nearest jiffy, while the base interval in get_vtime_delta() it is
subtracted from is, so the max cputime limit is required to avoid underflow.
This patch fixes the regression by limiting the account_other_time() from
get_vtime_delta() to avoid underflow, and lets the other three call sites
(in account_other_time() and steal_account_process_time()) account however
much steal time the host told us elapsed.
Suggested-by: Rik van Riel <riel@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com
[ Improved the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
trivial fix to spelling mistake in dev_err message and reformat code
to avoid being over 80 chars wide per line
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The nohz_stamp member of struct rq has been unused since 2010,
when this commit removed the code that referenced it:
396e894d28 ("sched: Revert nohz_ratelimit() for now")
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160815121410.5ea1c98f@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce the flag PMU_EV_CAP_READ_ACTIVE_PKG, useful for uncore events,
that allows a PMU to signal the generic perf code that an event is readable
in the current CPU if the event is active in a CPU in the same package as
the current CPU.
This is an optimization that avoids a unnecessary IPI for the common case
where uncore events are run and read in the same package but in
different CPUs.
As an example, the IPI removal speeds up perf_read() in my Haswell system
as follows:
- For event UNC_C_LLC_LOOKUP: From 260 us to 31 us.
- For event RAPL's power/energy-cores/: From to 255 us to 27 us.
For the optimization to work, all events in the group must have it
(similarly to PERF_EV_CAP_SOFTWARE).
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1471467307-61171-4-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mike reports:
Roughly 10% of the time, ltp testcase getrusage04 fails:
getrusage04 0 TINFO : Expected timers granularity is 4000 us
getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)!
getrusage04 0 TINFO : utime: 0us; stime: 179us
getrusage04 0 TINFO : utime: 3751us; stime: 0us
getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us:
And tracked it down to the case where the task simply doesn't get
_any_ [us]time ticks.
Update the code to assume all rtime is utime when we lack information,
thus ensuring a task that elides the tick gets time accounted.
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fredrik Markstrom <fredrik.markstrom@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: stable@vger.kernel.org # 4.3+
Fixes: 9d7fb04276 ("sched/cputime: Guarantee stime + utime == rtime")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, PERF_GROUP_SOFTWARE is used in the group_flags field of a
group's leader to indicate that is_software_event(event) is true for all
events in a group. This is the only usage of event->group_flags.
This pattern of setting a group level flags when all events in the group
share a property is useful for the flag introduced in the next patch and
for future CQM/CMT flags. So this patches generalizes group_flags to work
as an aggregate of event level flags.
PERF_GROUP_SOFTWARE denotes an inmutable event's property. All other flags
that I intend to add are also determinable at event initialization.
To better convey the above, this patch renames event's group_flags to
group_caps and PERF_GROUP_SOFTWARE to PERF_EV_CAP_SOFTWARE.
Individual event flags are stored in the new event->event_caps. Since the
cap flags do not change after event initialization, there is no need to
serialize event_caps. This new field is used when events are added to a
context, similarly to how PERF_GROUP_SOFTWARE and is_software_event()
worked.
Lastly, for consistency, updates is_software_event() to rely in event_cap
instead of the context index.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1471467307-61171-3-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When decoding the perf_regs mask in perf_output_sample_regs(),
we loop through the mask using find_first_bit and find_next_bit functions.
While the exisiting code works fine in most of the case, the logic
is broken for big-endian 32-bit kernels.
When reading a u64 mask using (u32 *)(&val)[0], find_*_bit() assumes
that it gets the lower 32 bits of u64, but instead it gets the upper
32 bits - which is wrong.
The fix is to swap the words of the u64 to handle this case.
This is _not_ a regular endianness swap.
Suggested-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yury Norov <ynorov@caviumnetworks.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1471426568-31051-2-git-send-email-maddy@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The call to smp_call_function_single in perf_event_read() may fail if
an invalid or not online CPU index is passed. Warn user if such bug is
present and return error.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1471467307-61171-2-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
At this time the perf_addr_filter_needs_mmap() function will _not_
return true on a user space 'stop' filter. But stop filters need
exactly the same kind of mapping that range and start filters get.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1468860187-318-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Function perf_event_mmap() is called by the MM subsystem each time
part of a binary is loaded in memory. There can be several mapping
for a binary, many times unrelated to the code section.
Each time a section of a binary is mapped address filters are
updated, event when the map doesn't pertain to the code section.
The end result is that filters are configured based on the last map
event that was received rather than the last mapping of the code
segment.
For example if we have an executable 'main' that calls library
'libcstest.so.1.0', and that we want to collect traces on code
that is in that library. The perf cmd line for this scenario
would be:
perf record -e cs_etm// --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main
Resulting in binaries being mapped this way:
root@linaro-nano:~# cat /proc/1950/maps
00400000-00401000 r-xp 00000000 08:02 33169 /home/linaro/main
00410000-00411000 r--p 00000000 08:02 33169 /home/linaro/main
00411000-00412000 rw-p 00001000 08:02 33169 /home/linaro/main
7fa2464000-7fa2474000 rw-p 00000000 00:00 0
7fa2474000-7fa25a4000 r-xp 00000000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25a4000-7fa25b3000 ---p 00130000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b3000-7fa25b7000 r--p 0012f000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b7000-7fa25b9000 rw-p 00133000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b9000-7fa25bd000 rw-p 00000000 00:00 0
7fa25bd000-7fa25be000 r-xp 00000000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25be000-7fa25cd000 ---p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25cd000-7fa25ce000 r--p 00000000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25ce000-7fa25cf000 rw-p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25cf000-7fa25eb000 r-xp 00000000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7fa25ef000-7fa25f2000 rw-p 00000000 00:00 0
7fa25f7000-7fa25f9000 rw-p 00000000 00:00 0
7fa25f9000-7fa25fa000 r--p 00000000 00:00 0 [vvar]
7fa25fa000-7fa25fb000 r-xp 00000000 00:00 0 [vdso]
7fa25fb000-7fa25fc000 r--p 0001c000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7fa25fc000-7fa25fe000 rw-p 0001d000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7ff2ea8000-7ff2ec9000 rw-p 00000000 00:00 0 [stack]
root@linaro-nano:~#
Before 'main()' can execute 'libcstest.so.1.0' has to be loaded in
memory. Once that has been done perf_event_mmap() has been called
4 times, with the last map starting at address 0x7fa25ce000 and
the address filter configured to start filtering when the
IP has passed over address 0x0x7fa25ce72c (0x7fa25ce000 + 0x72c).
But that is wrong since the code segment for library 'libcstest.so.1.0'
as been mapped at 0x7fa25bd000, resulting in traces not being
collected.
This patch corrects the situation by requesting that address
filters be updated only if the mapped event is for a code
segment.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1468860187-318-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Binary file names have to be supplied for both range and start/stop
filters but the current code only processes the filename if an
address range filter is specified. This code adds processing of
the filename for start/stop filters.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1468860187-318-2-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vincent reported triggering the WARN_ON_ONCE() in event_function_local().
While thinking through cases I noticed that by using event_function()
directly, we miss the inactive case usually handled by
event_function_call().
Therefore construct a blend of event_function_call() and
event_function() that handles the cases relevant to
event_function_local().
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # 4.5+
Fixes: fae3fde651 ("perf: Collapse and fix event_function_call() users")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
According to the reference manual of MPC8572 and T4240, bit 31 of
PEX_ERR_CAP_STAT is W1C (write 1 to clear).
Add the corresponding write to PEX_ERR_CAP_STAT in order to fix the PCIe
error capture.
Tested on a T4240 processor.
Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20160815190849.29327-1-theidsieck@leenox.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Frank reported kernel panic when he disabled several cores in BIOS
via following option:
Core Disable Bitmap(Hex) [0]
with number 0xFFE, which leaves 16 CPUs in system (out of 48).
The kernel panic below goes along with following messages:
smpboot: Max logical packages: 2^M
smpboot: APIC(0) Converting physical 0 to logical package 0^M
smpboot: APIC(20) Converting physical 1 to logical package 1^M
smpboot: APIC(40) Package 2 exceeds logical package map^M
smpboot: CPU 8 APICId 40 disabled^M
smpboot: APIC(60) Package 3 exceeds logical package map^M
smpboot: CPU 12 APICId 60 disabled^M
...
general protection fault: 0000 [#1] SMP^M
Modules linked in:^M
CPU: 15 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc5+ #1^M
Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016^M
task: ffff8801673e0000 ti: ffff8801673ac000 task.ti: ffff8801673ac000^M
RIP: 0010:[<ffffffff81014d54>] [<ffffffff81014d54>] uncore_change_context+0xd4/0x180^M
...
[<ffffffff810158ac>] uncore_event_init_cpu+0x6c/0x70^M
[<ffffffff81d8c91c>] intel_uncore_init+0x1c2/0x2dd^M
[<ffffffff81d8c75a>] ? uncore_cpu_setup+0x17/0x17^M
[<ffffffff81002190>] do_one_initcall+0x50/0x190^M
[<ffffffff810ab193>] ? parse_args+0x293/0x480^M
[<ffffffff81d87365>] kernel_init_freeable+0x1a5/0x249^M
[<ffffffff81d86a35>] ? set_debug_rodata+0x12/0x12^M
[<ffffffff816dc19e>] kernel_init+0xe/0x110^M
[<ffffffff816e93bf>] ret_from_fork+0x1f/0x40^M
[<ffffffff816dc190>] ? rest_init+0x80/0x80^M
The reason for the panic is wrong value of __max_logical_packages,
which lets logical_package_map uninitialized and the uncore code
relying on this map being properly initialized (maybe we should
add some safety checks there as well).
The __max_logical_packages is computed as:
DIV_ROUND_UP(total_cpus, ncpus);
- ncpus being number of cores
With above BIOS setup we get total_cpus == 16 which set
__max_logical_packages to 2 (ncpus is 12).
Once topology_update_package_map processes CPU with logical
pkg over 2 we display above messages and fail to initialize
the physical_to_logical_pkg map, which makes the uncore code
crash.
The fix is to remove logical_package_map bitmap completely
and keep and update the logical_packages number instead.
After we enumerate all the present CPUs, we check if the
enumerated logical packages count is within its computed
maximum from BIOS data.
If it's not the case, we set this maximum to the new enumerated
value and freeze any new addition of logical packages.
The freeze is because lot of init code like uncore/rapl/cqm
depends on having maximum logical package value set to allocate
their data, so we can't change it later on.
Prarit Bhargava tested the patch and confirms that it solves
the problem:
From dmidecode:
Core Count: 24
Core Enabled: 24
Thread Count: 48
Orig kernel boot log:
[ 0.464981] smpboot: Max logical packages: 19
[ 0.469861] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.477261] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.484760] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.492258] smpboot: APIC(c0) Converting physical 3 to logical package 3
1. nr_cpus=8, should stop enumerating in package 0:
[ 0.533664] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.539596] smpboot: Max logical packages: 19
2. max_cpus=8, should still enumerate all packages:
[ 0.526494] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.532428] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.538456] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.544486] smpboot: APIC(c0) Converting physical 3 to logical package 3
[ 0.550524] smpboot: Max logical packages: 19
3. nr_cpus=49 ( 2 socket + 1 core on 3rd socket), should stop enumerating in
package 2:
[ 0.521378] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.527314] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.533345] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.539368] smpboot: Max logical packages: 19
4. maxcpus=49, should still enumerate all packages:
[ 0.525591] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.531525] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.537547] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.543579] smpboot: APIC(c0) Converting physical 3 to logical package 3
[ 0.549624] smpboot: Max logical packages: 19
5. kdump (nr_cpus=1) works as well.
Reported-by: Frank Ramsay <framsay@redhat.com>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160815101700.GA30090@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Similar to:
efaad554b4 ("x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y")
... fix microcode loading from the initrd on AMD by adding the
randomization offset to the microcode patch container within the initrd.
Reported-and-tested-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20160817113314.GA19221@nazgul.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Purely cosmetic, no changes in the compiled code.
Perhaps it is just me but I can hardly read __replace_page() because I can't
distinguish "page" from "kpage" and because I need to look at the caller to
to ensure that, say, kpage is really the new page and the code is correct.
Rename them to old_page and new_page, this matches the caller.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brenden Blanco <bblanco@plumgrid.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Link: http://lkml.kernel.org/r/20160817153704.GC29724@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path,
it should only do this if page_check_address() fails.
This means that every enable/disable leads to unbalanced mem_cgroup_uncharge()
from put_page(old_page), it is trivial to underflow the page_counter->count
and trigger OOM.
Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: stable@vger.kernel.org # 3.17+
Fixes: 00501b531c ("mm: memcontrol: rewrite charge API")
Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Per NVMe-over-Fabrics 1.0 spec, sqsize is represented as
a 0-based value.
Also per spec, the RDMA binding values shall be set
to sqsize, which makes hsqsize 0-based values.
Thus, the sqsize during NVMf connect() is now:
[root@fedora23-fabrics-host1 for-48]# dmesg
[ 318.720645] nvme_fabrics: nvmf_connect_admin_queue(): sqsize for
admin queue: 31
[ 318.720884] nvme nvme0: creating 16 I/O queues.
[ 318.810114] nvme_fabrics: nvmf_connect_io_queue(): sqsize for i/o
queue: 127
Finally, current interpretation implies hrqsize is 1's based
so set it appropriately.
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Upon admin queue connect(), the rdma qp was being
set based on NVMF_AQ_DEPTH. However, the fabrics layer was
using the sqsize field value set for I/O queues for the admin
queue, which threw the nvme layer and rdma layer off-whack:
root@fedora23-fabrics-host1 nvmf]# dmesg
[ 3507.798642] nvme_fabrics: nvmf_connect_admin_queue():admin sqsize
being sent is: 128
[ 3507.798858] nvme nvme0: creating 16 I/O queues.
[ 3507.896407] nvme nvme0: new ctrl: NQN "nullside-nqn", addr
192.168.1.3:4420
Thus, to have a different admin queue value, we use
NVMF_AQ_DEPTH for connect() and RDMA private data
as the minimum depth specified in the NVMe-over-Fabrics 1.0 spec
(and in that RDMA private data we treat hrqsize as 1's-based
value, per current understanding of the fabrics spec).
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The host will be sending sqsize 0-based hsqsize value,
the target need to be adjusted as well.
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
As we moved the vdev handling to the main boot/shutdown code path we can
further simplify the resource table handling by moving the parsing spet
to boot as well. The lifespan of the resource table is changed to live
from rproc_boot() to rproc_shutdown().
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The newly introduced "always-on" flag allows us to stop giving the vdevs
special treatment. The ordering of resource allocation and life cycle of
the remote processor is kept intact.
This allows us to mark a remote processor with vdevs to not boot unless
explicitly requested to do so by a client driver.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The calculation of max_notifyid must only be done before we call start()
on the remoteproc drivers, so move the calculation to be part of the
loading steps.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce an "auto-boot" flag on rprocs to make it possible to flag
remote processors without vdevs to automatically boot once the firmware
is found.
Preserve previous behavior of the wkup_m3 processor being explicitly
booted by a consumer.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Loic Pallardy <loic.pallardy@st.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Minor overlapping changes for both merge conflicts.
Resolution work done by Stephen Rothwell was used
as a reference.
Signed-off-by: David S. Miller <davem@davemloft.net>
The field "owner" is set by the core.
Thus delete an unneeded initialisation.
Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-sleep:
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
x86/power/64: Use __pa() for physical address computation
PM / sleep: Update some system sleep documentation
EXTCON_PROP_USB_SS (SuperSpeed)[1] is necessary to distinguish
between USB/USB2 and USB3 connections on USB Type-C cables.
[1] https://en.wikipedia.org/wiki/USB#Overview
Cc: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Pull networking fixes from David Miller:
1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
Fietkau.
2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.
3) Fix some tg3 ethtool logic bugs, and one that would cause no
interrupts to be generated when rx-coalescing is set to 0. From
Satish Baddipadige and Siva Reddy Kallam.
4) QLCNIC mailbox corruption and napi budget handling fix from Manish
Chopra.
5) Fix fib_trie logic when walking the trie during /proc/net/route
output than can access a stale node pointer. From David Forster.
6) Several sctp_diag fixes from Phil Sutter.
7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.
8) Checksum fixup fixes in bpf from Daniel Borkmann.
9) Memork leaks in nfnetlink, from Liping Zhang.
10) Use after free in rxrpc, from David Howells.
11) Use after free in new skb_array code of macvtap driver, from Jason
Wang.
12) Calipso resource leak, from Colin Ian King.
13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.
14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.
15) Fix lockdep splats in macsec, from Sabrina Dubroca.
16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
handling.
17) Various tc-action bug fixes, from CONG Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net_sched: allow flushing tc police actions
net_sched: unify the init logic for act_police
net_sched: convert tcf_exts from list to pointer array
net_sched: move tc offload macros to pkt_cls.h
net_sched: fix a typo in tc_for_each_action()
net_sched: remove an unnecessary list_del()
net_sched: remove the leftover cleanup_a()
mlxsw: spectrum: Allow packets to be trapped from any PG
mlxsw: spectrum: Unmap 802.1Q FID before destroying it
mlxsw: spectrum: Add missing rollbacks in error path
mlxsw: reg: Fix missing op field fill-up
mlxsw: spectrum: Trap loop-backed packets
mlxsw: spectrum: Add missing packet traps
mlxsw: spectrum: Mark port as active before registering it
mlxsw: spectrum: Create PVID vPort before registering netdevice
mlxsw: spectrum: Remove redundant errors from the code
mlxsw: spectrum: Don't return upon error in removal path
i40e: check for and deal with non-contiguous TCs
ixgbe: Re-enable ability to toggle VLAN filtering
ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
...
Tom Herbert says:
====================
strp: Stream parser for messages
This patch set introduces a utility for parsing application layer
protocol messages in a TCP stream. This is a generalization of the
mechanism implemented of Kernel Connection Multiplexor.
This patch set adapts KCM to use the strparser. We expect that kTLS
can use this mechanism also. RDS would probably be another candidate
to use a common stream parsing mechanism.
The API includes a context structure, a set of callbacks, utility
functions, and a data ready function. The callbacks include
a parse_msg function that is called to perform parsing (e.g.
BPF parsing in case of KCM), and a rcv_msg function that is called
when a full message has been completed.
For strparser we specify the return codes from the parser to allow
the backend to indicate that control of the socket should be
transferred back to userspace to handle some exceptions in the
stream: The return values are:
>0 : indicates length of successfully parsed message
0 : indicates more data must be received to parse the message
-ESTRPIPE : current message should not be processed by the
kernel, return control of the socket to userspace which
can proceed to read the messages itself
other < 0 : Error is parsing, give control back to userspace
assuming that synchronization is lost and the stream
is unrecoverable (application expected to close TCP socket)
There is one issue I haven't been able to fully resolve. If parse_msg
returns ESTRPIPE (wants control back to userspace) the parser may
already have consumed some bytes of the message. There is no way to
put bytes back into the TCP receive queue and tcp_read_sock does not
allow an easy way to peek messages. In lieu of a better solution, we
return ENODATA on the socket to indicate that the data stream is
unrecoverable (application needs to close socket). This condition
should only happen if an application layer message header is split
across two skbuffs and parsing just the first skbuff wasn't sufficient
to determine the that transfer to userspace is needed.
This patch set contains:
- strparser implementation
- changes to kcm to use strparser
- strparser.txt documentation
v2:
- Add copyright notice to C files
- Remove GPL module license from strparser.c
- Add report of rxpause
v3:
- Restore GPL module license
- Use EXPORT_SYMBOL_GPL
v4:
- Removed unused function, changed another to be static as suggested
by davem
- Rewoked data_ready to be called from upper layer, no longer requires
taking over socket data_ready callback as suggested by Lance Chao
Tested:
- Ran a KCM thrash test for 24 hours. No behavioral or performance
differences observed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adapt KCM to use the stream parser. This mostly involves removing
the RX handling and setting up the strparser using the interface.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a utility for parsing application layer protocol
messages in a TCP stream. This is a generalization of the mechanism
implemented of Kernel Connection Multiplexor.
The API includes a context structure, a set of callbacks, utility
functions, and a data ready function.
A stream parser instance is defined by a strparse structure that
is bound to a TCP socket. The function to initialize the structure
is:
int strp_init(struct strparser *strp, struct sock *csk,
struct strp_callbacks *cb);
csk is the TCP socket being bound to and cb are the parser callbacks.
The upper layer calls strp_tcp_data_ready when data is ready on the lower
socket for strparser to process. This should be called from a data_ready
callback that is set on the socket:
void strp_tcp_data_ready(struct strparser *strp);
A parser is bound to a TCP socket by setting data_ready function to
strp_tcp_data_ready so that all receive indications on the socket
go through the parser. This is assumes that sk_user_data is set to
the strparser structure.
There are four callbacks.
- parse_msg is called to parse the message (returns length or error).
- rcv_msg is called when a complete message has been received
- read_sock_done is called when data_ready function exits
- abort_parser is called to abort the parser
The input to parse_msg is an skbuff which contains next message under
construction. The backend processing of parse_msg will parse the
application layer protocol headers to determine the length of
the message in the stream. The possible return values are:
>0 : indicates length of successfully parsed message
0 : indicates more data must be received to parse the message
-ESTRPIPE : current message should not be processed by the
kernel, return control of the socket to userspace which
can proceed to read the messages itself
other < 0 : Error is parsing, give control back to userspace
assuming that synchronzation is lost and the stream
is unrecoverable (application expected to close TCP socket)
In the case of error return (< 0) strparse will stop the parser
and report and error to userspace. The application must deal
with the error. To handle the error the strparser is unbound
from the TCP socket. If the error indicates that the stream
TCP socket is at recoverable point (ESTRPIPE) then the application
can read the TCP socket to process the stream. Once the application
has dealt with the exceptions in the stream, it may again bind the
socket to a strparser to continue data operations.
Note that ENODATA may be returned to the application. In this case
parse_msg returned -ESTRPIPE, however strparser was unable to maintain
synchronization of the stream (i.e. some of the message in question
was already read by the parser).
strp_pause and strp_unpause are used to provide flow control. For
instance, if rcv_msg is called but the upper layer can't immediately
consume the message it can hold the message and pause strparser.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While commit 9c706a49d6 ("net: ipconfig: fix use after free") avoids
the use after free, the resulting code still ends up calling both the
ic_setup_if() and ic_setup_routes() after calling ic_close_devs(), and
access to the device is still required.
Move the call to ic_close_devs() to the very end of the function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang says:
====================
net_sched: tc action fixes and updates
This patchset fixes a few regressions caused by the previous
code refactor and more. Thanks to Jamal for catching them!
Note, patch 3/7 and 4/7 are not strictly necessary for this patchset,
I just want to carry them together.
---
v4: adjust an indention for Jamal
add two more patches
v3: avoid list for fast path, suggested by Jamal
v2: replace flex_array with regular dynamic array
keep tcf_action_stats_update() in act_api.h
fix macro typos found by Amir
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The act_police uses its own code to walk the
action hashtable, which leads to that we could
not flush standalone tc police actions, so just
switch to tcf_generic_walker() like other actions.
(Joint work from Roman and Cong.)
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal reported a crash when we create a police action
with a specific index, this is because the init logic
is not correct, we should always create one for this
case. Just unify the logic with other tc actions.
Fixes: a03e6fe569 ("act_police: fix a crash during removal")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by Jamal, an action could be shared by
multiple filters, so we can't use list to chain them
any more after we get rid of the original tc_action.
Instead, we could just save pointers to these actions
in tcf_exts, since they are refcount'ed, so convert
the list to an array of pointers.
The "ugly" part is the action API still accepts list
as a parameter, I just introduce a helper function to
convert the array of pointers to a list, instead of
relying on the C99 feature to iterate the array.
Fixes: a85a970af2 ("net_sched: move tc_action into tcf_common")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct tcf_exts belongs to filters, should not be visible
to plain tc actions.
Cc: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is harmless because all users pass 'a' to this macro.
Fixes: 00175aec94 ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef")
Cc: Amir Vadai <amir@vadai.me>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This list_del() for tc action is not needed actually,
because we only use this list to chain bulk operations,
therefore should not be carried for latter operations.
Fixes: ec0595cc44 ("net_sched: get rid of struct tcf_common")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After refactoring tc_action into tcf_common, we no
longer need to cleanup temporary "actions" in list,
they are permanently stored in the hashtable.
Fixes: a85a970af2 ("net_sched: move tc_action into tcf_common")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
supersede our debugfs configuration interface in the long run. It is
especially necessary when batman-adv should be used in different
namespaces, since debugfs can not differentiate between those.
More specifically, the following changes are included:
- Two fixes for namespace handling by Andrew Lunn, checking also the
namespaces for parent interfaces, and supress debugfs entries
for non-default netns
- Implement various netlink commands for the new interface, by
Matthias Schiffer, Andrew Lunn, Sven Eckelmann and Simon Wunderlich
(13 patches):
* routing algorithm list
* hardif list
* translation tables (local and global)
* TTVN for the translation tables
* originator and neighbor tables for B.A.T.M.A.N. IV
and B.A.T.M.A.N. V
* gateway dump functionality for B.A.T.M.A.N. IV
and B.A.T.M.A.N. V
* Bridge Loop Avoidance claims, and corresponding BLA group
* Bridge Loop Avoidance backbone tables
- Finally, mark batman-adv as netns compatible, by Andrew Lunn (1 patch)
-----BEGIN PGP SIGNATURE-----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=KDfF
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20160816' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
pull request for net-next: batman-adv 2016-08-16
This feature patchset is all about adding netlink support, which should
supersede our debugfs configuration interface in the long run. It is
especially necessary when batman-adv should be used in different
namespaces, since debugfs can not differentiate between those.
More specifically, the following changes are included:
- Two fixes for namespace handling by Andrew Lunn, checking also the
namespaces for parent interfaces, and supress debugfs entries
for non-default netns
- Implement various netlink commands for the new interface, by
Matthias Schiffer, Andrew Lunn, Sven Eckelmann and Simon Wunderlich
(13 patches):
* routing algorithm list
* hardif list
* translation tables (local and global)
* TTVN for the translation tables
* originator and neighbor tables for B.A.T.M.A.N. IV
and B.A.T.M.A.N. V
* gateway dump functionality for B.A.T.M.A.N. IV
and B.A.T.M.A.N. V
* Bridge Loop Avoidance claims, and corresponding BLA group
* Bridge Loop Avoidance backbone tables
- Finally, mark batman-adv as netns compatible, by Andrew Lunn (1 patch)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
