This symbols is not needed to get access to selecting the
GPIOLIB anymore: any arch can select GPIOLIB.
Cc: Michael Büsch <m@bues.ch>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This symbols is not needed to get access to selecting the
GPIOLIB anymore: any arch can select GPIOLIB.
Cc: Michael Büsch <m@bues.ch>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB"
as this can now be selected directly.
Cc: Michael Büsch <m@bues.ch>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This replaces:
- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
now be selected directly.
- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
is now selectable by everyone, so we need not declare our
intent to select it.
When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".
Cc: Michael Büsch <m@bues.ch>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This replaces:
- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
now be selected directly.
- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
is now selectable by everyone, so we need not declare our
intent to select it.
When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".
Cc: Michael Büsch <m@bues.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB"
as this can now be selected directly.
Cc: Michael Büsch <m@bues.ch>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux@lists.openrisc.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
MFC device can be used without any external hardware dependencies (when
IOMMU is enabled), so it can be enabled by default (like it has been
already done for Exynos 542x platforms). This unifies handling of this
device for Exynos3250, Exynos4 and Exynos542x platforms. Board can still
include exynos-mfc-reserved-memory.dtsi to enable using this device
without IOMMU being enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This patch moves assigning reserved memory regions from each board dts
to common exynos-mfc-reserved-memory.dtsi file, where those regions are
defined.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Generic reserved memory regions bindings allow to automatically allocate
region of given parameters (alignment and size), so use this feature
instead of the hardcoded values, which had no dependency on the real
hardware. This patch also increases "left" region from 8MiB to 16MiB to
make the codec really usable with nowadays steams (with 8MiB reserved
region it was not even possible to decode 480p H264 video).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Using the new line naming mechanism from the GPIO subsystem, name
the GPIO lines on the HREFv60plus board that are connected as
GPIO on this design.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Using the new line naming mechanism from the GPIO subsystem, name
the GPIO lines on the Snowball board that are connected as
GPIO on this design.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move the compatible string "stericsson,ab8500" from the board
definitions into the main node in the chipset file where it
belongs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When setting up ILA in a router we noticed that the the encapsulation
is invoked twice: once in the route input path and again upon route
output. To resolve this we add a flag set_csum_neutral for the
ila_update_ipv6_locator. If this flag is set and the checksum
neutral bit is also set we assume that checksum-neutral translation
has already been performed and take no further action. The
flag is set only in ila_output path. The flag is not set for ila_input and
ila_xlat.
Tested:
Used 3 netns to set to emulate a router and two hosts. The router
translates SIR addresses between the two destinations in other two netns.
Verified ping and netperf are functional.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The of_find_net_device_by_node() function is defined in
<linux/of_net.h> but not included in the .c file that
implements it. Fix the following warning by including the
header:
net/core/net-sysfs.c:1494:19: warning: symbol 'of_find_net_device_by_node' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 5961 advises to only accept RST packets containing a seq number
matching the next expected seq number instead of the whole receive
window in order to avoid spoofing attacks.
However, this situation is not optimal in the case SACK is in use at the
time the RST is sent. I recently run into a scenario in which packet
losses were high while uploading data to a server, and userspace was
willing to frequently terminate connections by sending a RST. In
this case, the ACK sent on the receiver side (rcv_nxt) is frozen waiting
for a lost packet retransmission and SACK blocks are used to let the
client continue uploading data. At some point later on, the client sends
the RST (snd_nxt), which matches the next expected seq number of the
right-most SACK block on the receiver side which is going forward
receiving data.
In this scenario, as RFC 5961 defines, the RST SEQ doesn't match the
frozen main ACK at receiver side and thus gets dropped and a challenge
ACK is sent, which gets usually lost due to network conditions. The main
consequence is that the connection stays alive for a while even if it
made sense to accept the RST. This can get really bad if lots of
connections like this one are created in few seconds, allocating all the
resources of the server easily.
For security reasons, not all SACK blocks are checked (there could be a
big amount of SACK blocks => acceptable SEQ numbers). Furthermore, it
wouldn't make sense to check for RST in blocks other than the right-most
received one because the sender is not expected to be sending new data
after the RST. For simplicity, only up to the 4 most recently updated
SACK blocks (selective_acks[4] field) are compared to find the
right-most block, as usually those are the ones with bigger probability
to contain it.
This patch was tested in a 3.18 kernel and probed to improve the
situation in the scenario described above.
Signed-off-by: Pau Espin Pedrol <pau.espin@tessares.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User visible:
- Support cross unwinding, i.e. collecting '--call-graph dwarf' perf.data files
in one machine and then doing analysis in another machine of a different
hardware architecture. This enables, for instance, to do:
perf record -a --call-graph dwarf
on a x86-32 or aarch64 system and then do 'perf report' on it on a
x86_64 workstation. (He Kuang)
- Fix crash in build_id_cache__kallsyms_path(), recent regression (Wang Nan)
Infrastructure:
- Make tools/lib/bpf use the IS_ERR return facility consistently and also stop
using the _get_ term for non-reference count methods (Arnaldo Carvalho de Melo)
- 'perf config' refactorings (Taeung Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=DvZE
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160607' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Support cross unwinding, i.e. collecting '--call-graph dwarf' perf.data files
in one machine and then doing analysis in another machine of a different
hardware architecture. This enables, for instance, to do:
perf record -a --call-graph dwarf
on a x86-32 or aarch64 system and then do 'perf report' on it on a
x86_64 workstation. (He Kuang)
- Fix crash in build_id_cache__kallsyms_path(), recent regression (Wang Nan)
Infrastructure changes:
- Make tools/lib/bpf use the IS_ERR return facility consistently and also stop
using the _get_ term for non-reference count methods (Arnaldo Carvalho de Melo)
- 'perf config' refactorings (Taeung Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the current code "ent_per_page" could be more than "conn_num" making
"conn_num" negative after the subtraction. In the next iteration
through the loop then the negative is treated as a very high positive
meaning we don't put a limit on "ent_num". It could lead to memory
corruption.
Fixes: dbb799c397 ('qed: Initialize hardware for new protocols')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The missing br_vlan_should_use() test caused creation of an unneeded
local fdb entry on changing mac address of a bridge device when there is
a vlan which is configured on a bridge port but not on the bridge
device.
Fixes: 2594e9064a ("bridge: vlan: add per-vlan struct and move to rhashtables")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User visible:
- Tooling support for TopDown counters, recently added to the kernel (Andi Kleen)
- Show call graphs in 'perf script' when 1st event doesn't have it but some other has (He Kuang)
- Fix terminal cleanup when handling invalid .perfconfig files in 'perf top' (Taeung Song)
Build fixes:
- Respect CROSS_COMPILE for the linker in libapi (Lucas Stach)
Infrastructure:
- Fix perf_evlist__alloc_mmap() failure path (Wang Nan)
- Provide way to extract integer value from format_field (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=60TB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160606' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Tooling support for TopDown counters, recently added to the kernel (Andi Kleen)
- Show call graphs in 'perf script' when 1st event doesn't have it but some other has (He Kuang)
- Fix terminal cleanup when handling invalid .perfconfig files in 'perf top' (Taeung Song)
Build fixes:
- Respect CROSS_COMPILE for the linker in libapi (Lucas Stach)
Infrastructure changes:
- Fix perf_evlist__alloc_mmap() failure path (Wang Nan)
- Provide way to extract integer value from format_field (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Ahern says:
====================
net: vrf: Add support for local traffic to local addresses
Add support for locally originated traffic to VRF-local addresses,
be it addresses on enslaved devices or addresses on the VRF device:
$ ip addr show dev red
33: red: <NOARP,MASTER,UP,LOWER_UP> mtu 65536 qdisc pfifo_fast state UP group default qlen 1000
link/ether be:00:53:b5:e4:25 brd ff:ff:ff:ff:ff:ff
inet 1.1.1.1/32 scope global red
valid_lft forever preferred_lft forever
inet6 1111:1::1/128 scope global
valid_lft forever preferred_lft forever
$ ip addr show dev eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000
link/ether 02:e0:f9:79:34:bd brd ff:ff:ff:ff:ff:ff
inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 2100:1::1/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe79:34bd/64 scope link
valid_lft forever preferred_lft forever
$ ping -c1 -I red 10.100.1.1
ping: Warning: source address might be selected on device other than red.
PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data.
64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms
$ ping -c1 -I red 1.1.1.1
PING 1.1.1.1 (1.1.1.1) from 1.1.1.1 red: 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0.136 ms
--- 1.1.1.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.136/0.136/0.136/0.000 ms
$ ping6 -c1 -I red 2100:1::1
ping6: Warning: source address might be selected on device other than red.
PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes
64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.167 ms
--- 2100:1::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.167/0.167/0.167/0.000 ms
$ ping6 -c1 -I red 1111::1
PING 1111::1(1111::1) from 1111:1::1 red: 56 data bytes
64 bytes from 1111::1: icmp_seq=1 ttl=64 time=0.187 ms
--- 1111::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.187/0.187/0.187/0.000 ms
This change also enables use of loopback address on the VRF device:
$ ip addr add dev red 127.0.0.1/8
$ ping -c1 -I red 127.0.0.1
PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for locally originated traffic to VRF-local IPv6 addresses.
Similar to IPv4 a local dst is set on the skb and the packet is
reinserted with a call to netif_rx. With this patch, ping, tcp and udp
packets to a local IPv6 address are successfully routed:
$ ip addr show dev eth1
4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000
link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff
inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 2100:1::1/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe1c:b974/64 scope link
valid_lft forever preferred_lft forever
$ ping6 -c1 -I red 2100:1::1
ping6: Warning: source address might be selected on device other than red.
PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes
64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms
ip6_input is exported so the VRF driver can use it for the dst input
function. The dst_alloc function for IPv4 defaults to setting the input and
output functions; IPv6's does not. VRF does not need to duplicate the Rx path
so just export the ipv6 input function.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for locally originated traffic to VRF-local addresses. If
destination device for an skb is the loopback or VRF device then set
its dst to a local version of the VRF cached dst_entry and call netif_rx
to insert the packet onto the rx queue - similar to what is done for
loopback. This patch handles IPv4 support; follow on patch handles IPv6.
With this patch, ping, tcp and udp packets to a local IPv4 address are
successfully routed:
$ ip addr show dev eth1
4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000
link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff
inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 2100:1::1/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe1c:b974/64 scope link
valid_lft forever preferred_lft forever
$ ping -c1 -I red 10.100.1.1
ping: Warning: source address might be selected on device other than red.
PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data.
64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms
This patch also enables use of IPv4 loopback address on the VRF device:
$ ip addr add dev red 127.0.0.1/8
$ ping -c1 -I red 127.0.0.1
PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the stripping of the ethernet header from is_ip_tx_frame into the
ipv4 and ipv6 outbound functions and collapse vrf_send_v4_prep into
vrf_process_v4_outbound.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
unaccount_pmu_sb_event() did not check for attributes in event->attr
before calling detach_sb_event(), while account_pmu_event() did.
This caused NULL pointer reference in cgroup events that did not
have any of the attributes checked by account_pmu_event().
To trigger the bug just wait for a cgroup event to terminate, e.g.:
$ mkdir /dev/cgroup/devices/test
$ perf stat -e cycles -a -G test sleep 0
... see crash ...
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zheng <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1464809585-66072-1-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch implements direct encapsulation of IPv4 and IPv6 packets
in UDP. This is done a version "1" of GUE and as explained in I-D
draft-ietf-nvo3-gue-03.
Changes here are only in the receive path, fou with IPxIPx already
supports the transmit side. Both the normal receive path and
GRO path are modified to check for GUE version and check for
IP version in the case that GUE version is "1".
Tested:
IPIP with direct GUE encap
1 TCP_STREAM
4530 Mbps
200 TCP_RR
1297625 tps
135/232/444 90/95/99% latencies
IP4IP6 with direct GUE encap
1 TCP_STREAM
4903 Mbps
200 TCP_RR
1184481 tps
149/253/473 90/95/99% latencies
IP6IP6 direct GUE encap
1 TCP_STREAM
5146 Mbps
200 TCP_RR
1202879 tps
146/251/472 90/95/99% latencies
SIT with direct GUE encap
1 TCP_STREAM
6111 Mbps
200 TCP_RR
1250337 tps
139/241/467 90/95/99% latencies
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changes return statements in visornic_rx() to use literals instead of a
variable. Also changes function description to reflect the correct return
type.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the vague -1 return values to -EPERM.
This operation is not supported is a good alternative
to -1 because the return is basically telling the caller
that the processor doesn't support vmcall operations.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the vague -1 return value to -EINVAL
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the vague -1 return values to -EFAULT since
it would be the most appropriate, given that this error
would only occur in an unexpected bad offset field.
Resulting in a bad address.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the vague -1 return value to -EBUSY
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the vague -1 return value to -EINVAL
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a few checkpatch warnings in visorhba:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes an extraneous error check in devdata_initialize(), and updates the
function comment accordingly.
Signed-off-by: David Binder <david.binder@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes the conditional logic to check for an error code instead
of a success code.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Returns 0 instead of variable rc in visorhba_init().
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes the conditional logic by looking for the absence of work
to do, instead of the opposite.
Signed-off-by: David Binder <david.binder@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The prior patch which simplified the visorhba debugfs interface made it so
visorhbas_open[] and VISORHBA_OPEN_MAX were no longer needed, so they have
now been deleted.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
debugfs info for each visorhba device is now presented by a file named of
the following form within the debugfs tree:
visorhba/vbus<x>:dev<y>/info
where <x> is the vbus number, and <y> is the relative device number.
Also, the debugfs presentation function was converted to use the seq_file
interface, so that it could access the device context without resorting to
a global array. This also simplified the function.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The handling of CMD_NOTIFYGUEST_TYPE messages from the IO partition appears
to be only partially implemented, but fortunately it is never used in our
current environment. This patch deletes the unused code.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is necessary to enable ANY task mgmt command to complete
successfully via visorhba.
When issuing a task mgmt command (CMD_SCSITASKMGMT_TYPE) to the IO
partition (back-end), forward_taskmgmt_command() includes pointers
within the command area that will be used to wake up the issuing
process and provide the result when the command completes:
cmdrsp->scsitaskmgmt.notify_handle = (u64)¬ifyevent;
cmdrsp->scsitaskmgmt.notifyresult_handle = (u64)¬ifyresult;
'notify_handle' is a pointer to a 'wait_queue_head_t' variable, and
'notifyresult' is a pointer to an int. Both of these are just local
stack variables in the issuing process.
The way it's supposed to happen is that when the IO partition completes
the command, in our completion handling we get copies of those pointers
back from the IO partition, where we stash the result of the command at
'*notifyresult' (which should not be 0xffff, because that is the initial
value that the caller is looking to see a change in), and wake up the
wait queue at '*notify_handle'. There are several places we do that dance,
but prior to this patch, we always do it WRONG, like:
cmdrsp->scsitaskmgmt.notifyresult_handle = TASK_MGMT_FAILED;
wake_up_all((wait_queue_head_t *)cmdrsp->scsitaskmgmt.notify_handle);
The wake_up_all() part is correct (albeit with the help of the sloppy
pointer casting, but that's irrelevant to the bug), but the assignment of
'notifyresult_handle' is WRONG, and SHOULD read:
*(int *)(cmdrsp->scsitaskmgmt.notifyresult_handle) = TASK_MGMT_FAILED;
Without this change, the caller is NEVER going to notice a change in his
local value of 'notifyresult' when he does the:
if (!wait_event_timeout(notifyevent, notifyresult != 0xffff,
msecs_to_jiffies(45000)))
and hence will be timing out EVERY taskmgmt command.
This patch also eliminates the need for sloppy casting of pointers
back-and-forth between u64 values, with the help of idr_alloc() to provide
handles for us. It is the generated int handles we pass to the IO
partition to denote our completion context, and these are validated and
converted back to the required pointers when the task mgmt commands are
returned back to us by the IO partition.
== Testing ==
You must enable dynamic debugging in visorhba (build kernel with
'CONFIG_DYNAMIC_DEBUG=y', provide kernel parameter 'visorhba.dyndbg=+p')
to see kernel messages involved with visorhba scsi task mgmt commands,
which were added in this patch in the form of a few dev_dbg() / pr_debug()
messages.
In order to inject faults necessary to get visorhba to actully issue scsi
task mgmt commands, you will need to compile a kernel with
CONFIG_FAIL_IO_TIMEOUT and friends, in the "Kernel hacking" section:
* Enable "Fault-injection framework"
* Enable "Fault-injection capability for disk IO"
* Enable "Fault-injection capability for faking disk interrupts"
* Enable "Debugfs entries for fault-injection capabilities"
When running a kernel with those options, you can manually inject a fault
that will force a scsi task mgmt command to be issued like this:
# mount -t debugfs nodev /sys/kernel/debug
# cd /sys/kernel/debug/fail_io_timeout
# cat interval
1
# cat probability
0
# cat times
1
# echo 100 >probability
# cd /sys/block/sda
# l | grep fail
-rw-r--r-- 1 root root 4096 May 5 10:53 io-timeout-fail
-rw-r--r-- 1 root root 4096 May 5 10:54 make-it-fail
# echo 1 >io-timeout-fail
# echo 1 >make-it-fail
To test this patch, after performing the above steps, I did something to
force a block device i/o, then shortly afterwards examined the kernel log.
There I found evidence that visorhba had successfully issued a task mgmt
command, and that it completed successfully:
[ 333.352612] FAULT_INJECTION: forcing a failure.
name fail_io_timeout, interval 1, probability 100, space 0, times 1
[ 333.352617] CPU: 0 PID: 295 Comm: vhba_incoming Tainted: G C
4.6.0-rc3-ARCH+ #2
[ 333.352619] Hardware name: Dell Inc. PowerEdge T110/ ,
BIOS 1.23 12/15/2009
[ 333.352620] 0000000000000000 ffff88001d1a7dd0 ffffffff8125beeb
ffffffff818507c0
[ 333.352623] 0000000000000064 ffff88001d1a7df0 ffffffff8128047a
ffff8800113462b0
[ 333.352625] ffff88000e523000 ffff88001d1a7e00 ffffffff81241c79
ffff88001d1a7e18
[ 333.352627] Call Trace:
[ 333.352634] [<ffffffff8125beeb>] dump_stack+0x4d/0x72
[ 333.352637] [<ffffffff8128047a>] should_fail+0x11a/0x120
[ 333.352641] [<ffffffff81241c79>] blk_should_fake_timeout+0x29/0x30
[ 333.352643] [<ffffffff81241c36>] blk_complete_request+0x16/0x30
[ 333.352654] [<ffffffffa0118b36>] scsi_done+0x26/0x80 [scsi_mod]
[ 333.352657] [<ffffffffa014a56c>] process_incoming_rsps+0x2bc/0x770
[visorhba]
[ 333.352661] [<ffffffff81095630>] ? wait_woken+0x80/0x80
[ 333.352663] [<ffffffffa014a2b0>] ? add_scsipending_entry+0x100/0x100
[visorhba]
[ 333.352666] [<ffffffff81077759>] kthread+0xc9/0xe0
[ 333.352669] [<ffffffff814609d2>] ret_from_fork+0x22/0x40
[ 333.352671] [<ffffffff81077690>] ? kthread_create_on_node+0x180/0x180
[ 364.025672] sd 0:0:1:1: visorhba: initiating type=1 taskmgmt command
[ 364.029721] visorhba: notifying initiator with result=0x1
[ 364.029726] sd 0:0:1:1: visorhba: taskmgmt type=1 success; result=0x1
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We never issue SCSI commands of type CMD_VDISKMGMT_TYPE, so there is no
need to have code that processes their completions.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove svn-ids and fix typos in the licence declaration. Add my
copyright to the sdio code which I worked on mainly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
They were counted but never really used anywhere. Also change the printk
to a debug print, since it mostly shows on the expected -ENOMEDIUM on
card removal.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The printouts are not needed, the driver core has enough debug output
for this if wanted. So, use a helper to save boilerplate code.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
trans_start is gone from netdevice, so use the new helper function to
set the mark.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
List all authors, beautify description, match license to what is stated
in file headers, add firmware information.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is only this card supported, no need to iterate over the table.
The resulting firmware filename wasn't used anyway, but came from the
config file or hardcoded default.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike the previous patches which are plain indent outcomes, this has
some manual fixups to be not overly strict with the 80 char limit.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
