xfs_iflush_cluster() does a gang lookup on the radix tree, meaning
it can find inodes beyond the current cluster if there is sparse
cache population. gang lookups return results in ascending index
order, so stop trying to cluster inodes once the first inode outside
the cluster mask is detected.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The last thing we do before using call_rcu() on an xfs_inode to be
freed is mark it as invalid. This means there is a window between
when we know for certain that the inode is going to be freed and
when we do actually mark it as "freed".
This is important in the context of RCU lookups - we can look up the
inode, find that it is valid, and then use it as such not realising
that it is in the final stages of being freed.
As such, mark the inode as being invalid the moment we know it is
going to be reclaimed. This can be done while we still hold the
XFS_ILOCK_EXCL and the flush lock in xfs_inode_reclaim, meaning that
it occurs well before we remove it from the radix tree, and that
the i_flags_lock, the XFS_ILOCK and the inode flush lock all act as
synchronisation points for detecting that an inode is about to go
away.
For defensive purposes, this allows us to add a further check to
xfs_iflush_cluster to ensure we skip inodes that are being freed
after we grab the XFS_ILOCK_SHARED and the flush lock - we know that
if the inode number if valid while we have these locks held we know
that it has not progressed through reclaim to the point where it is
clean and is about to be freed.
[bfoster: fixed __xfs_inode_clear_reclaim() using ip->i_ino after it
had already been zeroed.]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The xfs_inode freed in xfs_inode_free() has multiple allocated
structures attached to it. We free these in xfs_inode_free() before
we mark the inode as invalid, and before we run call_rcu() to queue
the structure for freeing.
Unfortunately, this freeing can race with other accesses that are in
the RCU current grace period that have found the inode in the radix
tree with a valid state. This includes xfs_iflush_cluster(), which
calls xfs_inode_clean(), and that accesses the inode log item on the
xfs_inode.
The log item structure is freed in xfs_inode_free(), so there is the
possibility we can be accessing freed memory in xfs_iflush_cluster()
after validating the xfs_inode structure as being valid for this RCU
context. Hence we can get spuriously incorrect clean state returned
from such checks. This can lead to use thinking the inode is dirty
when it is, in fact, clean, and so incorrectly attaching it to the
buffer for IO and completion processing.
This then leads to use-after-free situations on the xfs_inode itself
if the IO completes after the current RCU grace period expires. The
buffer callbacks will access the xfs_inode and try to do all sorts
of things it shouldn't with freed memory.
IOWs, xfs_iflush_cluster() only works correctly when racing with
inode reclaim if the inode log item is present and correctly stating
the inode is clean. If the inode is being freed, then reclaim has
already made sure the inode is clean, and hence xfs_iflush_cluster
can skip it. However, we are accessing the inode inode under RCU
read lock protection and so also must ensure that all dynamically
allocated memory we reference in this context is not freed until the
RCU grace period expires.
To fix this, move all the potential memory freeing into
xfs_inode_free_callback() so that we are guarantee RCU protected
lookup code will always have the memory structures it needs
available during the RCU grace period that lookup races can occur
in.
Discovered-by: Brain Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When unmounting XFS, we call:
xfs_inode_free => xfs_idestroy_fork => xfs_iext_destroy
This goes over the whole indirection array and calls
xfs_iext_irec_remove for each one of the erps (from the last one to
the first one). As a result, we keep shrinking (reallocating
actually) the indirection array until we shrink out all of its
elements. When we have files with huge numbers of extents, umount
takes 30-80 sec, depending on the amount of files that XFS loaded
and the amount of indirection entries of each file. The unmount
stack looks like:
[<ffffffffc0b6d200>] xfs_iext_realloc_indirect+0x40/0x60 [xfs]
[<ffffffffc0b6cd8e>] xfs_iext_irec_remove+0xee/0xf0 [xfs]
[<ffffffffc0b6cdcd>] xfs_iext_destroy+0x3d/0xb0 [xfs]
[<ffffffffc0b6cef6>] xfs_idestroy_fork+0xb6/0xf0 [xfs]
[<ffffffffc0b87002>] xfs_inode_free+0xb2/0xc0 [xfs]
[<ffffffffc0b87260>] xfs_reclaim_inode+0x250/0x340 [xfs]
[<ffffffffc0b87583>] xfs_reclaim_inodes_ag+0x233/0x370 [xfs]
[<ffffffffc0b8823d>] xfs_reclaim_inodes+0x1d/0x20 [xfs]
[<ffffffffc0b96feb>] xfs_unmountfs+0x7b/0x1a0 [xfs]
[<ffffffffc0b98e4d>] xfs_fs_put_super+0x2d/0x70 [xfs]
[<ffffffff811e9e36>] generic_shutdown_super+0x76/0x100
[<ffffffff811ea207>] kill_block_super+0x27/0x70
[<ffffffff811ea519>] deactivate_locked_super+0x49/0x60
[<ffffffff811eaaee>] deactivate_super+0x4e/0x70
[<ffffffff81207593>] cleanup_mnt+0x43/0x90
[<ffffffff81207632>] __cleanup_mnt+0x12/0x20
[<ffffffff8108f8e7>] task_work_run+0xa7/0xe0
[<ffffffff81014ff7>] do_notify_resume+0x97/0xb0
[<ffffffff81717c6f>] int_signal+0x12/0x17
Further, this reallocation prevents us from freeing the extent list
from a RCU callback as allocation can block. Hence if the extent
list is in indirect format, optimise the freeing of the extent list
to only use kmem_free calls by freeing entire extent buffer pages at
a time, rather than extent by extent.
[dchinner: simplified freeing loop based on Christoph's suggestion]
Signed-off-by: Alex Lyakas <alex@zadarastorage.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We don't write back stale inodes so we should skip them in
xfs_iflush_cluster, too.
cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some careless idiot(*) wrote crap code in commit 1a3e8f3 ("xfs:
convert inode cache lookups to use RCU locking") back in late 2010,
and so xfs_iflush_cluster checks the wrong inode for whether it is
still valid under RCU protection. Fix it to lock and check the
correct inode.
(*) Careless-idiot: Dave Chinner <dchinner@redhat.com>
cc: <stable@vger.kernel.org> # 3.10.x-
Discovered-by: Brain Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When a failure due to an inode buffer occurs, the error handling
fails to abort the inode writeback correctly. This can result in the
inode being reclaimed whilst still in the AIL, leading to
use-after-free situations as well as filesystems that cannot be
unmounted as the inode log items left in the AIL never get removed.
Fix this by ensuring fatal errors from xfs_imap_to_bp() result in
the inode flush being aborted correctly.
cc: <stable@vger.kernel.org> # 3.10.x-
Reported-by: Shyam Kaushik <shyam@zadarastorage.com>
Diagnosed-by: Shyam Kaushik <shyam@zadarastorage.com>
Tested-by: Shyam Kaushik <shyam@zadarastorage.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Joe Lawrence reported a list_add corruption with 4.6-rc1 when
testing some custom md administration code that made it's own
block device nodes for the md array. The simple test loop of:
for i in {0..100}; do
mknod --mode=0600 $tmp/tmp_node b $MAJOR $MINOR
mdadm --detail --export $tmp/tmp_node > /dev/null
rm -f $tmp/tmp_node
done
Would produce this warning in bd_acquire() when mdadm opened the
device node:
list_add double add: new=ffff88043831c7b8, prev=ffff8804380287d8, next=ffff88043831c7b8.
And then produce this from bd_forget from kdevtmpfs evicting a block
dev inode:
list_del corruption. prev->next should be ffff8800bb83eb10, but was ffff88043831c7b8
This is a regression caused by commit c19b3b05 ("xfs: mode di_mode
to vfs inode"). The issue is that xfs_inactive() frees the
unlinked inode, and the above commit meant that this freeing zeroed
the mode in the struct inode. The problem is that after evict() has
called ->evict_inode, it expects the i_mode to be intact so that it
can call bd_forget() or cd_forget() to drop the reference to the
block device inode attached to the XFS inode.
In reality, the only thing we do in xfs_fs_evict_inode() that is not
generic is call xfs_inactive(). We can move the xfs_inactive() call
to xfs_fs_destroy_inode() without any problems at all, and this
will leave the VFS inode intact until it is completely done with it.
So, remove xfs_fs_evict_inode(), and do the work it used to do in
->destroy_inode instead.
cc: <stable@vger.kernel.org> # 4.6
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This fix prevents nodes to wrongly create a 00:00:00:00:00:00 originator
which can potentially interfere with the rest of the neighbor statistics.
Fixes: d6f94d91f7 ("batman-adv: ELP - adding basic infrastructure")
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The undefined behavior sanatizer detected an signed integer overflow in a
setup with near perfect link quality
UBSAN: Undefined behaviour in net/batman-adv/bat_iv_ogm.c:1246:25
signed integer overflow:
8713350 * 255 cannot be represented in type 'int'
The problems happens because the calculation of mixed unsigned and signed
integers resulted in an integer multiplication.
batadv_ogm_packet::tq (u8 255)
* tq_own (u8 255)
* tq_asym_penalty (int 134; max 255)
* tq_iface_penalty (int 255; max 255)
The tq_iface_penalty, tq_asym_penalty and inv_asym_penalty can just be
changed to unsigned int because they are not expected to become negative.
Fixes: c039876892 ("batman-adv: add WiFi penalty")
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
When the MAC address of the primary interface is changed,
update the originator address in the ELP and OGM skb buffers as
well in order to reflect the change.
Fixes: d6f94d91f7 ("batman-adv: ELP - adding basic infrastructure")
Reported-by: Marek Lindner <marek@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The function batadv_iv_ogm_orig_add_if allocates new buffers for bcast_own
and bcast_own_sum. It is expected that these buffers are unchanged in case
either bcast_own or bcast_own_sum couldn't be resized.
But the error handling of this function frees the already resized buffer
for bcast_own when the allocation of the new bcast_own_sum buffer failed.
This will lead to an invalid memory access when some code will try to
access bcast_own.
Instead the resized new bcast_own buffer has to be kept. This will not lead
to problems because the size of the buffer was only increased and therefore
no user of the buffer will try to access bytes outside of the new buffer.
Fixes: d0015fdd3d ("batman-adv: provide orig_node routing API")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The functions batadv_neigh_ifinfo_get increase the reference counter of the
batadv_neigh_ifinfo. These have to be reduced again when the reference is
not used anymore to correctly free the objects.
Fixes: 9786906022 ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batadv_neigh_ifinfo_get can return NULL when it cannot find (even when only
temporarily) anymore the neigh_ifinfo in the list neigh->ifinfo_list. This
has to be checked to avoid kernel Oopses when the ifinfo is dereferenced.
This a situation which isn't expected but is already handled by functions
like batadv_v_neigh_cmp. The same kind of warning is therefore used before
the function returns without dereferencing the pointers.
Fixes: 9786906022 ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batadv_send_skb_to_orig() calls dev_queue_xmit() so we can't use skb->len.
Fixes: 953324776d ("batman-adv: network coding - buffer unicast packets before forward")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
If we take "retry forever" literally on metadata IO errors, we can
hang at unmount, once it retries those writes forever. This is the
default behavior, unfortunately.
Add an error configuration option for this behavior and default it
to "fail" so that an unmount will trigger actuall errors, a shutdown
and allow the unmount to succeed. It will be noisy, though, as it
will log the errors and shutdown that occurs.
To fix this, we need to mark the filesystem as being in the process
of unmounting. Do this with a mount flag that is added at the
appropriate time (i.e. before the blocking AIL sync). We also need
to add this flag if mount fails after the initial phase of log
recovery has been run.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
now most of the infrastructure is in place, we can start adding
support for configuring specific errors such as ENODEV, ENOSPC, EIO,
etc. Add these error configurations and configure them all to have
appropriate behaviours. That is, all will be configured to retry
forever by default, except for ENODEV, which is an unrecoverable
error, so it will be configured to not retry on error
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On reception of an error, we can fail immediately, perform some
bound amount of retries or retry indefinitely. The current behaviour
we have is to retry forever.
However, we'd like the ability to choose how long the filesystem
should try after an error, it can either fail immediately, retry a
few times, or retry forever. This is implemented by using
max_retries sysfs attribute, to hold the amount of times we allow
the filesystem to retry after an error. Being -1 a special case
where the filesystem will retry indefinitely.
Add both a maximum retry count and a retry timeout so that we can
bound by time and/or physical IO attempts.
Finally, plumb these into xfs_buf_iodone error processing so that
the error behaviour follows the selected configuration.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Before we start expanding the number of error classes and errors we
can configure behaviour for, we need a simple and clear way to
define the default behaviour that we initialized each mount with.
Introduce a table based method for keeping the initial configuration
in, and apply that to the existing initialization code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the error configuration handle for async metadata write errors
in place, we can now add initial support to the IO error processing
in xfs_buf_iodone_error().
Add an infrastructure function to look up the configuration handle,
and rearrange the error handling to prepare the way for different
error handling conigurations to be used.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now we have the basic infrastructure, add the first error class so
we can build up the infrastructure in a meaningful way. Add the
metadata async write IO error class and sysfs entry, and introduce a
default configuration that matches the existing "retry forever"
behavior for async write metadata buffers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull libata updates from Tejun Heo:
"Trivial changes except for special case timeout bumping.
I have two more libata branches which depend on SCSI and dmaengine
tree respectively. I'll send pull requests for them once the
prerequisite trees are pulled in"
* 'for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata-scsi: use %*ph to dump small buffers
treewide: Fix typos in libata.xml
libata-core: Allow longer timeout for drive spinup from PUIS
libata: Fixup awkward whitespace in warning by removing line continuation.
We need to be able to change the way XFS behaviours in error
conditions depending on the type of underlying storage. This is
necessary for handling non-traditional block devices with extended
error cases, such as thin provisioned devices that can return ENOSPC
as an IO error.
Introduce the basic sysfs infrastructure needed to define and
configure error behaviours. This is done to be generic enough to
extend to configuring behaviour in other error conditions, such as
ENOMEM, which also has different desired behaviours according to
machine configuration.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reports have surfaced of a lockdep splat complaining about an
irq-safe -> irq-unsafe locking order in the xfs_buf_bio_end_io() bio
completion handler. This only occurs when I/O errors are present
because bp->b_lock is only acquired in this context to protect
setting an error on the buffer. The problem is that this lock can be
acquired with the (request_queue) q->queue_lock held. See
scsi_end_request() or ata_qc_schedule_eh(), for example.
Replace the locked test/set of b_io_error with a cmpxchg() call.
This eliminates the need for the lock and thus the lock ordering
problem goes away.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 0b89e9aa28 (cpuidle: delay enabling interrupts until all
coupled CPUs leave idle) rightfully fixed a regression by letting
the coupled idle state framework to handle local interrupt enabling
when the CPU is exiting an idle state.
The current code checks if the idle state is coupled and, if so, it
will let the coupled code to enable interrupts. This way, it can
decrement the ready-count before handling the interrupt. This
mechanism prevents the other CPUs from waiting for a CPU which is
handling interrupts.
But the check is done against the state index returned by the back
end driver's ->enter functions which could be different from the
initial index passed as parameter to the cpuidle_enter_state()
function.
entered_state = target_state->enter(dev, drv, index);
[ ... ]
if (!cpuidle_state_is_coupled(drv, entered_state))
local_irq_enable();
[ ... ]
If the 'index' is referring to a coupled idle state but the
'entered_state' is *not* coupled, then the interrupts are enabled
again. All CPUs blocked on the sync barrier may busy loop longer
if the CPU has interrupts to handle before decrementing the
ready-count. That's consuming more energy than saving.
Fixes: 0b89e9aa28 (cpuidle: delay enabling interrupts until all coupled CPUs leave idle)
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cut down on noise for mainstream users of the API and people doing build
testing by dropping the deprecated flag from regulator_can_change_voltage()
as it triggers even on the EXPORT_SYMBOL_GPL() which affects all builds
rather than just the remaining drivers with calls to it (for which fixes
are currently pending).
The function remains deprecated and is expected to be removed entirely
in v4.8.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXO1DsAAoJECTWi3JdVIfQFSkH/A1YGISAUiYkASQVtWQM3SeI
CmS5Cdv1NKVrSmZ+eNcOgjYfBCYNTm5iqW2jh+oholXCCvwNMq9tCavDkE4YR1B+
Wa+QB0bvaRtAKRg564QF7PexCDv/lQVt/7BItusaza9FXKIgi1vmt4GCojJzxOcS
NnJab7+8BSG8Xjngw5JaOTcvo26u3bQLBzAUzTaEXXDqbirlvUTKBzSBSDWWSYDN
W09QLX3UBRyC+TGjPl8lzSyJ+6MlCAaV5qRgmNLJip2X5MVP4I8okN1U4S9YywBm
8epi8oD9zEr/tWcbec8nNJSgWdAlxZzEJi+JWyoEcYk0hDVASfgrnBkWvNJeH0Q=
=yAs2
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-can-change-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Fix build warnings from regulator_can_change_voltage()
Cut down on noise for mainstream users of the API and people
doing build testing by dropping the deprecated flag from
regulator_can_change_voltage() as it triggers even on the
EXPORT_SYMBOL_GPL() which affects all builds rather than just
the remaining drivers with calls to it (for which fixes are
currently pending).
The function remains deprecated and is expected to be removed
entirely in v4.8"
* tag 'regulator-fix-can-change-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Silence build warnings from regulator_can_change_voltage()
Core infrastructural changes:
- Support for natively single-ended GPIO driver stages. This
means that if the hardware has registers to configure open
drain or open source configuration, we use that rather than
(as we did before) try to emulate it by switching the line
to an input to get high impedance. This is also documented
throughly in Documentation/gpio/driver.txt for those of you
who did not understand one word of what I just wrote.
- Start to do away with the unnecessarily complex and
unitelligible ARCH_REQUIRE_GPIOLIB and
ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from
the time when the GPIO subsystem was unmaintained. Archs can
now just select GPIOLIB and be done with it, cleanups to
arches will trickle in for the next kernel. Some minor archs
ACKed the changes immediately so these are included in this
pull request.
- Advancing the use of the data pointer inside the GPIO device
for storing driver data by switching the PowerPC, Super-H
Unicore and a few other subarches or subsystem drivers in
ALSA SoC, Input, serial, SSB, staging etc to use it.
- The initialization now reads the input/output state of the
GPIO lines, so that each GPIO descriptor knows - if this
callback is implemented - whether the line is input or
output. This also reflects nicely in userspace "lsgpio".
- It is now possible to name GPIO producer names, line names,
from the device tree. (Platform data has been supported for
a while.) I bet we will get a similar mechanism for ACPI
one of those days. This makes is possible to get sensible
producer names for e.g. GPIO rails in "lsgpio" in userspace.
New drivers:
- New driver for the Loongson1.
- The XLP driver now supports Broadcom Vulcan ARM64.
- The IT87 driver now supports IT8620 and IT8628.
- The PCA953X driver now supports Galileo Gen2.
Driver improvements:
- MCP23S08 was switched to use the gpiolib irqchip helpers and
now also suppors level-triggered interrupts.
- 74x164 and RCAR now supports the .set_multiple() callback
- AMDPT was converted to use generic GPIO.
- TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
support the new single ended callback for open drain
and in some cases open source.
- Implement the .get_direction() callback for a few more drivers
like PL061, Xgene.
Cleanups:
- Paul Gortmaker combed through the drivers and de-modularized
those who are not really modules.
- Move the GPIO poweroff DT bindings to the power subdir where
they belong.
- Rename gpio-generic.c to gpio-mmio.c, which is much more to the
point. That's what it is handling, nothing more, nothing less.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z4d6
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
- Support for natively single-ended GPIO driver stages.
This means that if the hardware has registers to configure open
drain or open source configuration, we use that rather than (as we
did before) try to emulate it by switching the line to an input to
get high impedance.
This is also documented throughly in Documentation/gpio/driver.txt
for those of you who did not understand one word of what I just
wrote.
- Start to do away with the unnecessarily complex and unitelligible
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
evolutional artifact from the time when the GPIO subsystem was
unmaintained.
Archs can now just select GPIOLIB and be done with it, cleanups to
arches will trickle in for the next kernel. Some minor archs ACKed
the changes immediately so these are included in this pull request.
- Advancing the use of the data pointer inside the GPIO device for
storing driver data by switching the PowerPC, Super-H Unicore and
a few other subarches or subsystem drivers in ALSA SoC, Input,
serial, SSB, staging etc to use it.
- The initialization now reads the input/output state of the GPIO
lines, so that each GPIO descriptor knows - if this callback is
implemented - whether the line is input or output. This also
reflects nicely in userspace "lsgpio".
- It is now possible to name GPIO producer names, line names, from
the device tree. (Platform data has been supported for a while).
I bet we will get a similar mechanism for ACPI one of those days.
This makes is possible to get sensible producer names for e.g.
GPIO rails in "lsgpio" in userspace.
New drivers:
- New driver for the Loongson1.
- The XLP driver now supports Broadcom Vulcan ARM64.
- The IT87 driver now supports IT8620 and IT8628.
- The PCA953X driver now supports Galileo Gen2.
Driver improvements:
- MCP23S08 was switched to use the gpiolib irqchip helpers and now
also suppors level-triggered interrupts.
- 74x164 and RCAR now supports the .set_multiple() callback
- AMDPT was converted to use generic GPIO.
- TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
support the new single ended callback for open drain and in some
cases open source.
- Implement the .get_direction() callback for a few more drivers like
PL061, Xgene.
Cleanups:
- Paul Gortmaker combed through the drivers and de-modularized those
who are not really modules.
- Move the GPIO poweroff DT bindings to the power subdir where they
belong.
- Rename gpio-generic.c to gpio-mmio.c, which is much more to the
point. That's what it is handling, nothing more, nothing less"
* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
gpio: zevio: make it explicitly non-modular
gpio: timberdale: make it explicitly non-modular
gpio: stmpe: make it explicitly non-modular
gpio: sodaville: make it explicitly non-modular
pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
gpio: dt-bindings: add wd,mbl-gpio bindings
gpio: of: make it possible to name GPIO lines
gpio: make gpiod_to_irq() return negative for NO_IRQ
gpio: xgene: implement .get_direction()
gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
gpio: tegra: Implement gpio_get_direction callback
gpio: set up initial state from .get_direction()
gpio: rename gpio-generic.c into gpio-mmio.c
gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
gpio: dwapb: add gpio-signaled acpi event support
gpio: dwapb: convert device node to fwnode
gpio: dwapb: remove name from dwapb_port_property
gpio/qoriq: select IRQ_DOMAIN
...
Pull HID updates from Jiri Kosina:
"No biggies this time:
- micro-optimization of implement() in HID core parses, from Dmitry
Torokhov
- thingm driver cleanups from Heiner Kallweit
- fine-graining detection of distance and tilt axes in wacom driver
from Jason Gerecke
- New hid-asus driver, currently supporting X205TA and VivoBook
E200HA, from Yusuke Fujimaki"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wacom: Add fuzz factor to distance and tilt axes
HID: usbhid: quirks for Corsair RGB keyboard & mice (K70R, K95RGB, M65RGB, K70RGB, K65RGB)
HID: thingm: remove not needed error message
HID: thingm: set new flag LED_HW_PLUGGABLE
HID: thingm: factor out duplicated code to thingm_init_led
HID: simplify implement() a bit
HID: asus: add support for VivoBook E200HA
HID: hidraw: silence an uninitialized variable warning
HID: roccat: silence an uninitialized variable warning
HID: Asus X205TA keyboard driver
HID: hidraw: switch to using memdup_user
None of the cpufreq governors currently in the tree will ever fail
an invocation of the ->governor() callback with the event argument
equal to CPUFREQ_GOV_STOP (unless invoked with incorrect arguments
which doesn't matter anyway) and it is rather difficult to imagine
a valid reason for such a failure.
Accordingly, rearrange the code in the core to make it clear that
this call never fails.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
None of the cpufreq governors currently in the tree will ever fail
an invocation of the ->governor() callback with the event argument
equal to CPUFREQ_GOV_POLICY_EXIT (unless invoked with incorrect
arguments which doesn't matter anyway) and it wouldn't really
make sense to fail it, because the caller won't be able to handle
that failure in a meaningful way.
Accordingly, rearrange the code in the core to make it clear that
this call never fails.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
One of the if () statements in intel_pstate_set_policy() causes
another if () to be evaluated if the condition is true and it
doesn't do anything else, so merge the two if () statements into
one.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Pull livepatching updates from Jiri Kosina:
- remove of our own implementation of architecture-specific relocation
code and leveraging existing code in the module loader to perform
arch-dependent work, from Jessica Yu.
The relevant patches have been acked by Rusty (for module.c) and
Heiko (for s390).
- live patching support for ppc64le, which is a joint work of Michael
Ellerman and Torsten Duwe. This is coming from topic branch that is
share between livepatching.git and ppc tree.
- addition of livepatching documentation from Petr Mladek
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: make object/func-walking helpers more robust
livepatch: Add some basic livepatch documentation
powerpc/livepatch: Add live patching support on ppc64le
powerpc/livepatch: Add livepatch stack to struct thread_info
powerpc/livepatch: Add livepatch header
livepatch: Allow architectures to specify an alternate ftrace location
ftrace: Make ftrace_location_range() global
livepatch: robustify klp_register_patch() API error checking
Documentation: livepatch: outline Elf format and requirements for patch modules
livepatch: reuse module loader code to write relocations
module: s390: keep mod_arch_specific for livepatch modules
module: preserve Elf information for livepatch modules
Elf: add livepatch-specific Elf constants
Pull networking updates from David Miller:
"Highlights:
1) Support SPI based w5100 devices, from Akinobu Mita.
2) Partial Segmentation Offload, from Alexander Duyck.
3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.
4) Allow cls_flower stats offload, from Amir Vadai.
5) Implement bpf blinding, from Daniel Borkmann.
6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
actually using FASYNC these atomics are superfluous. From Eric
Dumazet.
7) Run TCP more preemptibly, also from Eric Dumazet.
8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
driver, from Gal Pressman.
9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.
10) Improve BPF usage documentation, from Jesper Dangaard Brouer.
11) Support tunneling offloads in qed, from Manish Chopra.
12) aRFS offloading in mlx5e, from Maor Gottlieb.
13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
Leitner.
14) Add MSG_EOR support to TCP, this allows controlling packet
coalescing on application record boundaries for more accurate
socket timestamp sampling. From Martin KaFai Lau.
15) Fix alignment of 64-bit netlink attributes across the board, from
Nicolas Dichtel.
16) Per-vlan stats in bridging, from Nikolay Aleksandrov.
17) Several conversions of drivers to ethtool ksettings, from Philippe
Reynes.
18) Checksum neutral ILA in ipv6, from Tom Herbert.
19) Factorize all of the various marvell dsa drivers into one, from
Vivien Didelot
20) Add VF support to qed driver, from Yuval Mintz"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
Revert "phy dp83867: Make rgmii parameters optional"
r8169: default to 64-bit DMA on recent PCIe chips
phy dp83867: Make rgmii parameters optional
phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
bpf: arm64: remove callee-save registers use for tmp registers
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
switchdev: pass pointer to fib_info instead of copy
net_sched: close another race condition in tcf_mirred_release()
tipc: fix nametable publication field in nl compat
drivers: net: Don't print unpopulated net_device name
qed: add support for dcbx.
ravb: Add missing free_irq() calls to ravb_close()
qed: Remove a stray tab
net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fec-mpc52xx: use phydev from struct net_device
bpf, doc: fix typo on bpf_asm descriptions
stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fs-enet: use phydev from struct net_device
...
The btrfs_{set,remove}xattr inode operations check for a read-only root
(btrfs_root_readonly) before calling into generic_{set,remove}xattr. If
this check is moved into __btrfs_setxattr, we can get rid of
btrfs_{set,remove}xattr.
This patch applies to mainline, I would like to keep it together with
the other xattr cleanups if possible, though. Could you please review?
Thanks,
Andreas
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Ubifs internally uses special inodes for storing xattrs. Those inodes
had NULL {get,set,remove}xattr inode operations before this change, so
xattr operations on them would fail. The super block's s_xattr field
would also apply to those special inodes. However, the inodes are not
visible outside of ubifs, and so no xattr operations will ever be
carried out on them anyway.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
While doing recent bring-up of nvme/host with target-core T10-PI,
I noticed /sys/block/nvme*/integrity/device_is_integrity_capable
was false, and /sys/block/nvme*/integrity/tag_size contained
a bogus value.
AFAICT outside of blk_integrity_compare() for DM + MD these
are informational values, but go ahead and add the missing
assignments for nvme/host to match what SCSI does within
sd_dif_config_host() for consistency's sake.
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jay Freyensee <james.p.freyensee@intel.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Sagi Grimberg <sagi at grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch adds a new state that when set has the core automatically
kill request queues prior to removing namespaces.
If PCI device is not present at the time the nvme driver's remove is
called, we can kill all IO queues immediately instead of waiting for
the watchdog thread to do that at its polling interval. This improves
scenarios where multiple hot plug events occur at the same time since
it doesn't block the pci enumeration for as long.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This exposes ioctl and sysfs methods a user can invoke to request the
driver rescan a controller and its namespaces. This is less harsh than
doing a controller reset, which temporarilly halts all IO, just to
surface a newly attached namespace.
This is mainly useful for controllers that implement the namespace
management command, but do not support the namespace notify change
asynchronous event notification.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Reduce error logging when no corrective action is required.
Suggessted-by: Chris Petersen <cpetersen@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of removing the PCI device from the kernel's topology on
controller failure, this patch simply requests unbinding the device
from the driver. This avoids concurrently running pci removal with the
hot plug event, which has been reported to be problematic when multiple
surprise events occur near simultaneously.
The other benefit is that we will have PCI config and memory space
available to poke around for debugging a failed controller, assuming
the device was not physically removed.
The down side occurs if the platform and/or kernel do not support any
type of surprise hot removal. The device will remain visible through
sysfs (and therefore lspci), and some manual work is necessary to get
the logical topology corrected. But if your platform and/or kernel don't
support surprise removal, you probably shouldn't be doing that anyway.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Use the online queue count instead of the number of allocated queues. The
controller should just return an invalid queue identifier error to the
commands if a queue wasn't created. While it's not harmful, it's still
not correct.
Reported-by: Saar Gross <saar@annapurnalabs.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The driver previously requested allocating queues for the total possible
number of CPUs so that blk-mq could rebalance these if CPUs were added
after initialization. The number of hardware contexts can now be changed
at runtime, so we only need to allocate the number of online queues
since we can add more later.
Suggested-by: Jeff Lien <jeff.lien@hgst.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
bio_inc_remaining() and the block core's new async
__blkdev_issue_discard() interface
- make DM multipath's fast code-paths lockless, using lockless_deference,
to significantly improve large NUMA performance when using blk-mq. The
m->lock spinlock contention was a serious bottleneck.
- a few other small code cleanups and Documentation fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXNdGVAAoJEMUj8QotnQNaYYgH/Rf2am46A78kcR5b9nN2I+Tb
+MkqQyf8mXUzNHOu3v93CVugT+tBZuJcpHPJgCSc/1GXtgsjHLvbkO2Mc+Ioe45S
PlUA3HdRzxHSJ365SdYvT+bY+QQlGiySelSBrJHlikXC88kz3wqyQ146BT1Rw/w+
t0mi1liNJtZHsuH+3uO9uxe5+H7476lB84i79Kz0x8Ygv5+urgaSvDBRO5EH/hkJ
LN2WJWHDQLT4MtHKCuiMiLpu/1HGvISN2QrMPsFjC1d1DbbZvRWAxYDwGaP/C277
IflPo7sA/nds5T2vqb0fRTPuxBnzXdFMMvf+VQX7pjCnxlhfaxBkvNtnFpxW+oA=
=iCyS
-----END PGP SIGNATURE-----
Merge tag 'dm-4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- based on Jens' 'for-4.7/core' to have DM thinp's discard support use
bio_inc_remaining() and the block core's new async __blkdev_issue_discard()
interface
- make DM multipath's fast code-paths lockless, using lockless_deference,
to significantly improve large NUMA performance when using blk-mq.
The m->lock spinlock contention was a serious bottleneck.
- a few other small code cleanups and Documentation fixes
* tag 'dm-4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: unroll issue_discard() to create longer discard bio chains
dm thin: use __blkdev_issue_discard for async discard support
dm thin: remove __bio_inc_remaining() and switch to using bio_inc_remaining()
dm raid: make sure no feature flags are set in metadata
dm ioctl: drop use of __GFP_REPEAT in copy_params()'s __vmalloc() call
dm stats: fix spelling mistake in Documentation
dm cache: update cache-policies.txt now that mq is an alias for smq
dm mpath: eliminate use of spinlock in IO fast-paths
dm mpath: move trigger_event member to the end of 'struct multipath'
dm mpath: use atomic_t for counting members of 'struct multipath'
dm mpath: switch to using bitops for state flags
dm thin: Remove return statement from void function
dm: remove unused mapped_device argument from free_tio()
Pull block driver updates from Jens Axboe:
"On top of the core pull request, this is the drivers pull request for
this merge window. This contains:
- Switch drivers to the new write back cache API, and kill off the
flush flags. From me.
- Kill the discard support for the STEC pci-e flash driver. It's
trivially broken, and apparently unmaintained, so it's safer to
just remove it. From Jeff Moyer.
- A set of lightnvm updates from the usual suspects (Matias/Javier,
and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei
Tao.
- A set of updates for NVMe:
- Turn the controller state management into a proper state
machine. From Christoph.
- Shuffling of code in preparation for NVMe-over-fabrics, also
from Christoph.
- Cleanup of the command prep part from Ming Lin.
- Rewrite of the discard support from Ming Lin.
- Deadlock fix for namespace removal from Ming Lin.
- Use the now exported blk-mq tag helper for IO termination.
From Sagi.
- Various little fixes from Christoph, Guilherme, Keith, Ming
Lin, Wang Sheng-Hui.
- Convert mtip32xx to use the now exported blk-mq tag iter function,
from Keith"
* 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits)
lightnvm: reserved space calculation incorrect
lightnvm: rename nr_pages to nr_ppas on nvm_rq
lightnvm: add is_cached entry to struct ppa_addr
lightnvm: expose gennvm_mark_blk to targets
lightnvm: remove mgt targets on mgt removal
lightnvm: pass dma address to hardware rather than pointer
lightnvm: do not assume sequential lun alloc.
nvme/lightnvm: Log using the ctrl named device
lightnvm: rename dma helper functions
lightnvm: enable metadata to be sent to device
lightnvm: do not free unused metadata on rrpc
lightnvm: fix out of bound ppa lun id on bb tbl
lightnvm: refactor set_bb_tbl for accepting ppa list
lightnvm: move responsibility for bad blk mgmt to target
lightnvm: make nvm_set_rqd_ppalist() aware of vblks
lightnvm: remove struct factory_blks
lightnvm: refactor device ops->get_bb_tbl()
lightnvm: introduce nvm_for_each_lun_ppa() macro
lightnvm: refactor dev->online_target to global nvm_targets
lightnvm: rename nvm_targets to nvm_tgt_type
...
Pull core block layer updates from Jens Axboe:
"This is the core block IO changes for this merge window. Nothing
earth shattering in here, it's mostly just fixes. In detail:
- Fix for a long standing issue where wrong ordering in blk-mq caused
order_to_size() to spew a warning. From Bart.
- Async discard support from Christoph. Basically just splitting our
sync interface into a submit + wait part.
- Add a cleaner interface for flagging whether a device has a write
back cache or not. We've previously overloaded blk_queue_flush()
with this, but let's make it more explicit. Drivers cleaned up and
updated in the drivers pull request. From me.
- Fix for a double check for whether IO accounting is enabled or not.
From Michael Callahan.
- Fix for the async discard from Mike Snitzer, reinstating the early
EOPNOTSUPP return if the device doesn't support discards.
- Also from Mike, export bio_inc_remaining() so dm can drop it's
private copy of it.
- From Ming Lin, add support for passing in an offset for request
payloads.
- Tag function export from Sagi, which will be used in NVMe in the
drivers pull.
- Two blktrace related fixes from Shaohua.
- Propagate NOMERGE flag when making a request from a bio, also from
Shaohua.
- An optimization to not parse cgroup paths in blk-throttle, if we
don't need to. From Shaohua"
* 'for-4.7/core' of git://git.kernel.dk/linux-block:
blk-mq: fix undefined behaviour in order_to_size()
blk-throttle: don't parse cgroup path if trace isn't enabled
blktrace: add missed mask name
blktrace: delete garbage for message trace
block: make bio_inc_remaining() interface accessible again
block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discard
block: Minor blk_account_io_start usage cleanup
block: add __blkdev_issue_discard
block: remove struct bio_batch
block: copy NOMERGE flag from bio to request
block: add ability to flag write back caching on a device
blk-mq: Export tagset iter function
block: add offset in blk_add_request_payload()
writeback: Fix performance regression in wb_over_bg_thresh()
