When PAGE_SIZE > 4k single page can contain 2 RDS fragments. If
'rds_ib_cong_recv' ignore the RDS fragment offset in to the page it
then read the data fragment as far congestion map update and lead to
corruption of the RDS connection far congestion map.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix issue in 'rds_ib_cong_recv' when accessing unaligned memory
allocated by 'rds_page_remainder_alloc' using uint64_t pointer.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The --page-offset command line option was only used for ARM, to filter
symbol addresses below CONFIG_PAGE_OFFSET. This is no longer needed, so
remove the functionality altogether.
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Now that we no longer emit .stubs symbols into a section VMA loaded
at absolute address 0x1000, we can drop the ARM-specific override that
sets a lower limit based on CONFIG_PAGE_OFFSET, below which symbols are
filtered from the kallsyms output.
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On ARM, the linker may emit veneers to deal with relative branch
instructions that appear too far away from their targets. Since the
second kallsyms pass results in an increase of the kernel size, it may
result in additional veneers to be emitted, potentially affecting the
output of kallsyms itself if these symbols are visible to it, and for
that reason, symbols whose names end in '_veneer' are ignored explicitly.
However, when building Thumb2 kernels, such veneers are named differently
if they also incur a mode switch, and since they are not filtered by
kallsyms, they may cause the build to fail. So filter symbols whose names
end in '_from_arm' or '_from_thumb' as well.
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arm_dma_set_mask() implements exactly the same behavior as the fallback
that dma_set_mask() takes if the set_dma_mask op is not set. Remove it
and use that fallback instead like what is already done for
dma_get_mask().
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
It was reported that a kernel with CONFIG_ARM_PATCH_IDIV=y stopped
booting when compiled with the upcoming gcc 6. Turns out that turning
a function address into a writable array is undefined and gcc 6 decided
it was OK to omit the store to the first word of the function while
still preserving the store to the second word.
Even though gcc 6 is now fixed to behave more coherently, it is a
mystery that gcc 4 and gcc 5 actually produce wanted code in the kernel.
And in fact the reduced test case to illustrate the issue does indeed
break with gcc < 6 as well.
In any case, let's guard the kernel against undefined compiler behavior
by hiding the nature of the array location as suggested by gcc
developers.
Reference: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70128
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch fixes an issue I found in which we were dropping frames if we
had enabled checksums on GRE headers that were encapsulated by either FOU
or GUE. Without this patch I was barely able to get 1 Gb/s of throughput.
With this patch applied I am now at least getting around 6 Gb/s.
The issue is due to the fact that with FOU or GUE applied we do not provide
a transport offset pointing to the GRE header, nor do we offload it in
software as the GRE header is completely skipped by GSO and treated like a
VXLAN or GENEVE type header. As such we need to prevent the stack from
generating it and also prevent GRE from generating it via any interface we
create.
Fixes: c3483384ee ("gro: Allow tunnel stacking in the case of FOU/GUE")
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert says:
====================
udp: GRO in UDP sockets
This patch set adds GRO functions (gro_receive and gro_complete) to UDP
sockets and removes udp_offload infrastructure.
Add GRO functions (gro_receive and gro_complete) to UDP sockets. In
udp_gro_receive and udp_gro_complete a socket lookup is done instead of
looking up the port number in udp_offloads. If a socket is found and
there are GRO functions for it then those are called. This feature
allows binding GRO functions to more than just a port number.
Eventually, we will be able to use this technique to allow application
defined GRO for an application protocol by attaching BPF porgrams to UDP
sockets for doing GRO.
In order to implement these functions, we added exported
udp6_lib_lookup_skb and udp4_lib_lookup_skb functions in ipv4/udp.c and
ipv6/udp.c. Also, inet_iif and references to skb_dst() were changed to
check that dst is set in skbuf before derefencing. In the GRO path there
is now a UDP socket lookup performed before dst is set, to the get the
device in that case we simply use skb->dev.
Tested:
Ran various combinations of VXLAN and GUE TCP_STREAM and TCP_RR tests.
Did not see any material regression.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the UDP encapsulation GRO functions have been moved to the UDP
socket we not longer need the udp_offload insfrastructure so removing it.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adapt geneve_gro_receive, geneve_gro_complete to take a socket argument.
Set these functions in tunnel_config. Don't set udp_offloads any more.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adapt gue_gro_receive, gue_gro_complete to take a socket argument.
Don't set udp_offloads any more.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adapt vxlan_gro_receive, vxlan_gro_complete to take a socket argument.
Set these functions in tunnel_config. Don't set udp_offloads any more.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add gro_receive and gro_complete to struct udp_tunnel_sock_cfg.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds GRO functions (gro_receive and gro_complete) to UDP
sockets. udp_gro_receive is changed to perform socket lookup on a
packet. If a socket is found the related GRO functions are called.
This features obsoletes using UDP offload infrastructure for GRO
(udp_offload). This has the advantage of not being limited to provide
offload on a per port basis, GRO is now applied to whatever individual
UDP sockets are bound to. This also allows the possbility of
"application defined GRO"-- that is we can attach something like
a BPF program to a UDP socket to perfrom GRO on an application
layer protocol.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add externally visible functions to lookup a UDP socket by skb. This
will be used for GRO in UDP sockets. These functions also check
if skb->dst is set, and if it is not skb->dev is used to get dev_net.
This allows calling lookup functions before dst has been set on the
skbuff.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In inet_iif check if skb_rtable is NULL for the skb and return
skb->skb_iif if it is.
This change allows inet_iif to be called before the dst
information has been set in the skb (e.g. when doing socket based
UDP GRO).
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa says:
====================
sock: lockdep tightening
First patch is from Eric Dumazet and improves lockdep accuracy for
socket locks. After that, second patch introduces lockdep_sock_is_held
and uses it. Final patch reverts and reworks the lockdep fix from Daniel
in the filter code, as we now have tighter lockdep support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 5a5abb1fa3 ("tun, bpf: fix suspicious RCU usage
in tun_{attach, detach}_filter") and replaces it to use lock_sock around
sk_{attach,detach}_filter. The checks inside filter.c are updated with
lockdep_sock_is_held to check for proper socket locks.
It keeps the code cleaner by ensuring that only one lock governs the
socket filter instead of two independent locks.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The socket is either locked if we hold the slock spin_lock for
lock_sock_fast and unlock_sock_fast or we own the lock (sk_lock.owned
!= 0). Check for this and at the same time improve that the current
thread/cpu is really holding the lock.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During release_sock we use callbacks to finish the processing
of outstanding skbs on the socket. We actually are still locked,
sk_locked.owned == 1, but we already told lockdep that the mutex
is released. This could lead to false positives in lockdep for
lockdep_sock_is_held (we don't hold the slock spinlock during processing
the outstanding skbs).
I took over this patch from Eric Dumazet and tested it.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now wakeirq stops working for device if wakeup option for
this device will be reconfigured through sysfs, like:
echo disabled > /sys/devices/platform/extcon_usb1/power/wakeup
echo enabled > /sys/devices/platform/extcon_usb1/power/wakeup
Once above set of commands is executed the device's wakeup_source
opject will be recreated and dev->power.wakeup->wakeirq field will
contain NULL. As result, device_wakeup_arm_wake_irqs() will not arm
wakeirq for the affected device.
Hece, lets try to fix it in the following way:
check for dev->wakeirq field when device_wakeup_attach() is called
and if !NULL re-attach wakeirq to the device
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sometimes the rc6 sysfs counter spontaneously resets,
causing turbostat prints a very large number
as it tries to calcuate % = 100 * (old - new) / interval
When we see (old > new), print ***.**% instead
of a bogus huge number.
Note that this detection is not fool-proof, as the counter
could reset several times and still result in new > old.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hard-code BXT ART to 19200MHz, so turbostat --debug
can fully enumerate TSC:
CPUID(0x15): eax_crystal: 3 ebx_tsc: 186 ecx_crystal_hz: 0
TSC: 1190 MHz (19200000 Hz * 186 / 3 / 1000000)
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some processors use the Interrupt Response Time Limit (IRTL) MSR value
to describe the maximum IRQ response time latency for deep
package C-states. (Though others have the register, but do not use it)
Lets print it out to give insight into the cases where it is used.
IRTL begain in SNB, with PC3/PC6/PC7, and HSW added PC8/PC9/PC10.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The CPUID.SGX bit was printed, even if --debug was used
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This driver registers cpuidle devices when a CPU comes online, but it
leaves the registrations in place when a CPU goes offline. The module
exit code only unregisters the currently online CPUs, leaving the
devices for offline CPUs dangling.
This patch changes the driver to clean up all registrations on exit,
even those from CPUs that are offline.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a cpuidle registration error occurs during the hot plug notifier
callback, we should really inform the hot plug machinery instead of
just ignoring the error. This patch changes the callback to properly
return on error.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The helper function, intel_idle_cpu_init, registers one new device
with the cpuidle layer. If the registration should fail, that
function immediately calls intel_idle_cpuidle_devices_uninit() to
unregister every last CPU's device. However, it makes no sense to do
so, when called from the hot plug notifier callback.
This patch moves the call to intel_idle_cpuidle_devices_uninit()
outside of the helper function to the one call site that actually
needs to perform the de-registrations.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This driver sets the broadcast tick quite early on during probe and does
not clean up again in cast of failure. This patch moves the setup call
after the registration, placing the on_each_cpu() calls within the global
CPU lock region.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The helper function, intel_idle_cpuidle_devices_uninit, frees the
globally allocated per-CPU data. However, this function is invoked
from the hot plug notifier callback at a time when freeing that data
is not safe.
If the call to cpuidle_register_driver() should fail (say, due to lack
of memory), then the driver will free its per-CPU region. On the
*next* CPU_ONLINE event, the driver will happily use the region again
and even free it again if the failure repeats.
This patch fixes the issue by moving the call to free_percpu() outside
of the helper function at the two call sites that actually need to
free the per-CPU data.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the module_init() method, if the per-CPU allocation fails, then the
active cpuidle registration is not cleaned up. This patch fixes the
issue by attempting the allocation before registration, and then
cleaning it up again on registration failure.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the module_exit() method, this driver first frees its per-CPU
pointer, then unregisters a callback making use of the pointer.
Furthermore, the function, intel_idle_cpuidle_devices_uninit, is racy
against CPU hot plugging as it calls for_each_online_cpu().
This patch corrects the issues by unregistering first on the exit path
while holding the hot plug lock.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function, intel_idle_cpuidle_driver_init, makes calls on each CPU
to auto_demotion_disable() and c1e_promotion_disable(). These calls
are redundant, as intel_idle_cpu_init() does the same calls just a bit
later on. They are also premature, as the driver registration may yet
fail.
This patch removes the redundant code.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function, intel_idle_cpuidle_driver_init, delivers no error codes
at all. This patch changes the function to return 'void' instead of
returning zero.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The
variable set here is later used as a divisor.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Update the docs according to the recent code changes, too.
Fixes: c0c508a418 ("i2c: mux: demux-pinctrl: Clean up sysfs attributes")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
ath.git patches for 4.7. Major changes:
ath10k
* implement push-pull tx model using mac80211 software queuing support
* enable scan in AP mode (NL80211_FEATURE_AP_SCAN)
wil6210
* add basic PBSS (Personal Basic Service Set) support
* add initial P2P support
* add oob_mode module parameter
Commit 425595a7fc ("livepatch: reuse module loader code to write
relocations") adds a possibility of dereferncing pointers supplied by the
consumer of the livepatch API before sanity (NULL) checking them (patch
and patch->mod).
Spotted by smatch tool.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch makes Designware I2S driver use the fifo
depth value to program the fifo configuration register
instead of using hardcoded values.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ip6_route_output() never returns NULL, so it is not appropriate to
check if the return value is NULL.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use the SET_NOIRQ_SYSTEM_SLEEP_PM_OPS helper macro for mvebu_pcie_pm_ops.
The macro also sets up freeze_noirq, thaw_noirq and poweroff_noirq,
restore_noirq accordingly.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mvebu_pcie_pm_ops structure is never modified, so declare it as const.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
