dma_mmap_attrs() should be called with cpu address returned by
dma_alloc_attrs(). Existing code however passed pages array base as cpu
address. This worked only by a pure luck on ARM architecture. This patch
fixes this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
BIT_IRQS_ENABLED was never set because of incorrect test in
decon_vlank_enable() function, what resulted in lack of enabling vblank
support. This patch fixes this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Patch ebf3fd403b ("drm/exynos: add
pm_runtime to DECON 5433") removed some code from decon_enable()
function, but it left set_bit(BIT_SUSPENDED, &ctx->flags) call, which
was earlier called only in error path. This patch removes it, what
finally lets driver to go out of suspended state.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes issue introduced by commit
cf67cc9a29 ("drm/exynos: remove struct
exynos_drm_display"), which removed assigning of drm bridge to drm
encoder. Lack of it caused that no bridge callbacks were called on
encoder enable/disable actions.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
There is no point exposing all internal functions to global kernel name
space, so make all internals functions static.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commands subject to exception handling are to be returned to the scsi
mid-layer. Make sure that the various command pointers and command lists
in the low-level driver are correctly cleansed of affected commands.
This fixes some bugs that I accidentally introduced in v4.5-rc1 including
the removal of INIT_LIST_HEAD for the 'autosense' and 'disconnected'
command lists, and the possible NULL pointer dereference in
NCR5380_bus_reset() that was reported by Dan Carpenter.
hostdata->sensing may also point to an affected command so this pointer
also has to be cleared. The abort handler calls complete_cmd() to take
care of this; let's have the bus reset handler do the same.
The issue queue may also contain an affected command. If so, remove it.
This also follows the abort handler logic.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 62717f537e ("ncr5380: Implement new eh_bus_reset_handler")
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: <stable@vger.kernel.org> # 4.5
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MIC is SoC component and important part of kms pipeline on Exynos5433,
so convert it to use component framework like other KMS/CRTC drivers.
MIC driver is already listed on KMS component driver list in Exynos DRM
core, so without this conversion, initialization of Exynos DRM core
fails on Exynos 5433 SoC.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Drivers should use devm_clk* interface instead of of_clk* functions.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch fixes compilation warnings (on 64bit architectures) and bugs
related to casting pointers through 32bit integers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Drivers should use %p for printing pointers instead of hardcoding them
as hexadecimal integers. This patch fixes compilation warnings on 64bit
architectures.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Because PLAT_SAMSUNG isn't include exynos SoCs for arm64, but
ARCH_EXYNOS can do it. And it also needs to add ARCH_S3C64XX instead of
PLAT_SAMSUNG.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The 'action' (or restart mode) and data parameters may be used by restart
handlers, so they should be passed to the restart callback functions.
Cc: Sylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The Zodiac watchdog is implemented on a microcontoller. The reset reason
currently labelled "trigger" is not to detect when the watchdog has
triggered (as had been initially understood and suggested by the naming),
but to inform the reader that the watchdog, which in fact has it's own
hardware watchdog, has been reset because the hardware watchdog has
triggered. Renaming to "hw watchdog".
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Calling return copy_to_user(...) in an ioctl will not do the right thing
if there's a pagefault: copy_to_user returns the number of bytes not
copied in this case.
Fix up watchdog/rc32434_wdt to do
return copy_to_user(...)) ? -EFAULT : 0;
instead.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The BCM7038 watchdog driver is specific to Broadcom ARM and MIPS
SoCs so do not present it on other architectures, unless
build-testing.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The driver uses the atomic_io_modify() function to update registers, but
that function is only available on 32-bit ARM. Recent changes have added
ARCH_MVEBU support to 64-bit ARM and hence allowed this driver to build
on 64-bit ARM where this function isn't available and thereby causing
allmodconfig builds to break.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The Technologic Systems TS-4800 is an i.MX515 board, so its drivers
are useless unless building a SOC_IMX51 kernel, except for build
testing purposes.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Add Ethernet support (Synopsys MAC IP 3.50a) on stm32f429 SOC.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
While there's no risk of divison by zero, the logic there is akward, as it
does the calculus for the numerator and denominator before checking
if this will be used.
Change the order to check first if the denominator is zero, and only
calculating the numerator/denominator if not.
This should also avoid those smatch errors:
drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In order to reduce the risk of a bad merge, let's move the new
kvm_call_hyp back to its original location in the file. This has
zero impact from a code point of view.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As warned by smatch:
drivers/media/usb/airspy/airspy.c:541 airspy_start_streaming() warn: test_bit() takes a bit number
drivers/media/usb/airspy/airspy.c:569 airspy_start_streaming() warn: test_bit() takes a bit number
drivers/media/usb/airspy/airspy.c:605 airspy_stop_streaming() warn: test_bit() takes a bit number
set_bit/clear_bit argument is the bit number, and not 1 << bit.
Thankfully, one of the bits was not used (URB_BUF), with would
otherwise cause a driver misfunctioning.
Clean this mess by always using set_bit/clear_bit/test_bit and
removing the unused bit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Remove the unused ovfx2_vga_mode/ovfx2_cif_mode arrays from the ov519
driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Plantronics DA45 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x4" and "cannot get freq at
ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and
avoids those error messages.
Signed-off-by: Dennis Kadioglu <denk@post.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The polarity of the gpio buttons is defined to '0' which is
active high. The buttons are active low though which has been verified by
testing it and by looking into the schematics. While at it use
defines rathers than numbers for the key codes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the ov519 driver not working (unable to talk to the sensor) when
plugged into a xhci host. The root cause here is that uhci/ohci/ehci
hosts typically will send any pending async requests every milli-second
and then go to sleep for the rest if the milli-second, where as xhci hosts
send them immediately, causing things to go too fast for the ov519 bridge.
This commit adds a few delays fixing this.
Signed-off-by: Wesley Post <pa4wdh@xs4all.nl>
[hdegoede@redhat.com: Also add delays to w996Xcf.c, as that needs them too]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
On my bttv card "Hauppauge WinTV [card=10]" capturing in YV12 fmt at max
size results in a solid green rectangle being captured (all colors 0 in
YUV).
This turns out to be caused by max-width (924) not being a multiple of 16.
We've likely never hit this problem before since normally xawtv / tvtime,
etc. will prefer packed pixel formats. But when using a video card which
is using xf86-video-modesetting + glamor, only planar XVideo fmts are
available, and xawtv will chose a matching capture format to avoid needing
to do conversion, triggering the solid green window problem.
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Regenerate imx_v4_v5_defconfig by running:
make imx_v4_v5_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/imx_v4_v5_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As used in (and tested on) the ASRock IMB-150 board. Implementation is
identical to other NCT chips, just with different registers.
Signed-off-by: Rob Kramer <rob@solution-space.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Both nodes are required to access NAND Flash memory. Additional
settings will be necessary at the board level to use it.
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The dmas/dma-names properties are added to the UART nodes. Note that additional
properties are needed to enable them at the board level: check bindings for
details.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The phy-armada375-usb2 driver uses IOMEM functions so COMPILE_TEST && OF
build failed with:
drivers/built-in.o: In function `armada375_usb_phy_probe':
phy-armada375-usb2.c:(.text+0x121d): undefined reference to
`devm_ioremap_resource'
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Since the related driver (CPG/MSSR driver) only manages the first module
clock, this driver should not handle the HSUSB registers. So, this patch
removes the HSUSB registers handling.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Most newer Rockchip SoCs provide the possibility to use a usb-phy
as passthrough for the debug uart (uart2), making it possible to
for example get console output without needing to open the device.
This patch adds an early_initcall to enable this functionality
conditionally via the commandline and also disables the corresponding
usb controller in the devicetree.
Currently only data for the rk3288 is provided, but at least the
rk3188 and arm64 rk3368 also provide this functionality and will be
enabled later.
On a spliced usb cable the signals are tx on white wire(D+) and
rx on green wire(D-).
The one caveat is that currently the reconfiguration of the phy
happens as early_initcall, as the code depends on the unflattened
devicetree being available. Everything is fine if only a regular
console is active as the console-replay will happen after the
reconfiguation. But with earlycon active output up to smp-init
currently will get lost.
The phy is an optional property for the connected dwc2 controller,
so we still provide the phy device but fail all phy-ops with -EBUSY
to make sure the dwc2 does not try to transmit anything on the
repurposed phy.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add dt binding documentation for rockchip display port PHY.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This patch to add a generic PHY driver for ROCKCHIP eMMC PHY.
Access the PHY via registers provided by GRF (general register
files) module.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This patch adds a binding that describes the Rockchip eMMC PHYs
found on Rockchip SoCs eMMC interface.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The function can return negative value so it should be assigned to signed
variable. The patch changes also type of related i variable to make code
more compact and coherent.
The problem has been detected using patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
LPT/WPT-H are limited to max 180 MHz CRT dotclock. Most other platforms
have a limit of 350 MHz. Supposedly gen3 and gen4 go up to 400 MHz.
VLV is a bit special since the docs are poor. Supposedly the DAC
would be good up to 355 MHz, but currently we limit the DPLL to
270 MHz, so we'll have to limit the port clock to the same unless
we change the DPLL limits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-7-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Rather than assume the VGA dotclock is really the FDI based thing,
let's read out the real thing via iclkip, and after readout it'll
get to compare it with the FDI based number to make sure they're
in sync.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The reason for spcial casing 20MHz in the iclkip calculations is that
it would overflow the 7 bit divisor value. Let's rewrite the special
case to check for just that, and bump up auxdiv when needed. This makes
the code work for freqeuencies close to but not exactly 20MHz. The real
lower limit for auxdiv=0 is actually:
172800000/(0x7f+2)*64)=~20930 kHz, and below that we must resort to
auxdiv=1.
Actually this is all very theoretical since we limit the dotclock to
min 25MHz with CRT on all platforms. 25Mhz is actually the documented
limit in Bspec, so it seems we ought to never need to worry about the
auxdiv=1 case. But no harm in having it.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
This makes a number of cleanups to handling of mapping failures during
memory hotplug on Power:
For errors creating the linear mapping for the hot-added region:
* This is now reported with EFAULT which is more appropriate than the
previous EINVAL (the failure is unlikely to be related to the
function's parameters)
* An error in this path now prints a warning message, rather than just
silently failing to add the extra memory.
* Previously a failure here could result in the region being partially
mapped. We now clean up any partial mapping before failing.
For errors creating the vmemmap for the hot-added region:
* This is now reported with EFAULT instead of causing a BUG() - this
could happen for external reason (e.g. full hash table) so it's better
to handle this non-fatally
* An error message is also printed, so the failure won't be silent
* As above a failure could cause a partially mapped region, we now
clean this up. [mpe: move htab_remove_mapping() out of #ifdef
CONFIG_MEMORY_HOTPLUG to enable this]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment the hpte_removebolted callback in ppc_md returns void and
will BUG_ON() if the hpte it's asked to remove doesn't exist in the first
place. This is awkward for the case of cleaning up a mapping which was
partially made before failing.
So, we add a return value to hpte_removebolted, and have it return ENOENT
in the case that the HPTE to remove didn't exist in the first place.
In the (sole) caller, we propagate errors in hpte_removebolted to its
caller to handle. However, we handle ENOENT specially, continuing to
complete the unmapping over the specified range before returning the error
to the caller.
This means that htab_remove_mapping() will work sanely on a partially
present mapping, removing any HPTEs which are present, while also returning
ENOENT to its caller in case it's important there.
There are two callers of htab_remove_mapping():
- In remove_section_mapping() we already WARN_ON() any error return,
which is reasonable - in this case the mapping should be fully
present
- In vmemmap_remove_mapping() we BUG_ON() any error. We change that to
just a WARN_ON() in the case of ENOENT, since failing to remove a
mapping that wasn't there in the first place probably shouldn't be
fatal.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, the only error that htab_remove_mapping() can report is -EINVAL,
if removal of bolted HPTEs isn't implemeted for this platform. We make
a few clean ups to the handling of this:
* EINVAL isn't really the right code - there's nothing wrong with the
function's arguments - use ENODEV instead
* We were also printing a warning message, but that's a decision better
left up to the callers, so remove it
* One caller is vmemmap_remove_mapping(), which will just BUG_ON() on
error, making the warning message redundant, so no change is needed
there.
* The other caller is remove_section_mapping(). This is called in the
memory hot remove path at a point after vmemmap_remove_mapping() so
if hpte_removebolted isn't implemented, we'd expect to have already
BUG()ed anyway. Put a WARN_ON() here, in lieu of a printk() since this
really shouldn't be happening.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of assuming we've correctly set up SPLL to run at 270Mhz for
FDI, let's use the port_clock from pipe_config which should be what
we want. This would catch problems if someone misconfigures SPLL for
whatever reason.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Currently we check if the encoder's idea of dotclock agrees with what
we calculated based on the FDI parameters. We do this in the encoder
.get_config() hooks, which isn't so nice in case the BIOS (or some other
outside party) made a mess of the state and we're just trying to take
over.
So as a prep step to being able sanitize such a bogus state, move the
the sanity check to just after we've read out the entire state. If
we then need to sanitize a bad state, it should be easier to move the
sanity check to occur after sanitation instead of before it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Instead of repopulatin the rotation_info struct for the fb every time
we try to use the fb, we can just populate it once when creating the fb,
and later we can just copy the pre-populate struct into the gtt_view.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-10-git-send-email-ville.syrjala@linux.intel.com
