We unconditionally disable/update FBC even during the page flip
IOCTLs, and an unconditional disable/update at every atomic commit
touching the primary plane shouldn't impact PC state residency
noticeably. Besides, the code that checks for rotation is a good hint
that we may be forgetting something else, so let's leave all the
decisions to intel_fbc.c, making the code much safer.
Once we have the code to properly make FBC enable/update decisions
based on atomic states, with proper locking, then we'll be able to
evaluate whether it will be worth trying to optimize the cases where a
disable isn't needed.
v2: Upstream moved and now our patch needs to remove dev_priv.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453406837-10511-1-git-send-email-paulo.r.zanoni@intel.com
If frontbuffer_bits doesn't match the current frontbuffer, there's no
reason to recompress or update FBC.
There was a plan to make the FBC test suite catch this type of
problem, but it never got implemented due to being low priority.
While at it, also implement Ville's suggestion and use
plane->frontbuffer_bit instead of INTEL_FRONTBUFFER_PRIMARY.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453210558-7875-8-git-send-email-paulo.r.zanoni@intel.com
Before this patch, page flips would call intel_frontbuffer_flip() and
intel_frontbuffer_flip_complete(), which would call intel_fbc_flush(),
which would call intel_fbc_update(). The problem is that drawing
operations also trigger intel_fbc_flush() calls, so it's not
guaranteed that we have the CRTC and FB locks grabbed when
intel_fbc_flush() happens, since the call trace may come from the
rendering path.
We're trying to make the FBC code grab the appropriate CRTC/FB locks,
so split the drawing and the flipping logic in order to achieve that
in later patches. So now the frontbuffer tracking code is just going
to be used for frontbuffer drawing, and intel_fbc_update() is going to
be used directly for actual page flips.
As a note, we don't need to call intel_fbc_flip() during the two
places where we call intel_frontbuffer_flip() since in one of them we
already have an intel_fbc_update() call, and in the other we have the
planes disabled.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453210558-7875-7-git-send-email-paulo.r.zanoni@intel.com
We say "dev_priv->fbc.something" way too many times in our code while
we could be saying just "fbc->something" with a previous declaration
of fbc. This has been bothering me for a while but I didn't want to
patch it since I wanted to fix the real problems first. But as I add
more code I keep thinking about it, especially since it makes the code
easier to read and it can make us fit 80 columns easier, so let's just
do the change now.
While at it, also rename from i915_fbc to intel_fbc because the whole
FBC code uses intel_fbc.
v2: Rebase after the work_fn changes.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453406763-10400-1-git-send-email-paulo.r.zanoni@intel.com
The early return inside __intel_fbc_update does not completely check
all the parameters that affect the FBC register values. For example,
we currently lack looking at crtc->adjusted_y (for the fence Y offset)
and all the parameters that affect the CFB size (for i8xx).
Instead of just adding the missing parameters to the check and hoping
that any changes to the fbc_activate functions also come with a
matching change to the __intel_fbc_update check, introduce a new
structure where we store these parameters and use the structure at the
fbc_activate function. Of course, it's still possible to access
everything from dev_priv in those functions, but IMHO the new code
will be harder to break.
v2: Rebase.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453210558-7875-5-git-send-email-paulo.r.zanoni@intel.com
platform_device_register_simple() returns ERR_PTR on error.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Instead of waiting for 50ms, just wait until the next vblank, since
it's the minimum requirement. The whole infrastructure of FBC is based
on vblanks, so waiting for X vblanks instead of X milliseconds sounds
like the correct way to go. Besides, 50ms may be less than a vblank on
super slow modes that may or may not exist.
There are some small improvements in PC state residency (due to the
fact that we're now using 16ms for the common modes instead of 50ms),
but the biggest advantage is still the correctness of being
vblank-based instead of time-based.
v2:
- Rebase after changing the patch order.
- Update the commit message.
v3:
- Fix bogus vblank_get() instead of vblank_count() (Ville).
- Don't forget to call drm_crtc_vblank_{get,put} (Chris, Ville)
- Adjust the performance details on the commit message.
v4:
- Don't grab the FBC mutex just to grab the vblank (Maarten)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453406585-10233-1-git-send-email-paulo.r.zanoni@intel.com
The 'tools/perf/test/make' makefile has in its default, 'all' target
builds that will pollute the source code directory, i.e. that will not
use O= variable.
The 'build-test' should be run as often as possible, preferrably after
each non strictly non-code commit, so speed it up by selecting just
the O= targets.
Furthermore it tests both the Makefile.perf file, that is normally
driven by the main Makefile, and the Makefile, reduce the time in half
by having just MK=Makefile, the most usual, tested by 'build-test'.
Please run:
make -C tools/perf -f tests/make
from time to time for testing also the in-place build tests.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jrt9utscsiqkmjy3ccufostd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The DT binding doc references the max77802 clocks header file which makes
no sense since of course it doesn't contain data related to the regulators.
It's a copy and paste error, so add a reference to the correct header file.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
fca839c00a ("workqueue: warn if memory reclaim tries to flush
!WQ_MEM_RECLAIM workqueue") implemented flush dependency warning which
triggers if a PF_MEMALLOC task or WQ_MEM_RECLAIM workqueue tries to
flush a !WQ_MEM_RECLAIM workquee.
This assumes that workqueues marked with WQ_MEM_RECLAIM sit in memory
reclaim path and making it depend on something which may need more
memory to make forward progress can lead to deadlocks. Unfortunately,
workqueues created with the legacy create*_workqueue() interface
always have WQ_MEM_RECLAIM regardless of whether they are depended
upon memory reclaim or not. These spurious WQ_MEM_RECLAIM markings
cause spurious triggering of the flush dependency checks.
WARNING: CPU: 0 PID: 6 at kernel/workqueue.c:2361 check_flush_dependency+0x138/0x144()
workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
...
Workqueue: deferwq deferred_probe_work_func
[<c0017acc>] (unwind_backtrace) from [<c0013134>] (show_stack+0x10/0x14)
[<c0013134>] (show_stack) from [<c0245f18>] (dump_stack+0x94/0xd4)
[<c0245f18>] (dump_stack) from [<c0026f9c>] (warn_slowpath_common+0x80/0xb0)
[<c0026f9c>] (warn_slowpath_common) from [<c0026ffc>] (warn_slowpath_fmt+0x30/0x40)
[<c0026ffc>] (warn_slowpath_fmt) from [<c00390b8>] (check_flush_dependency+0x138/0x144)
[<c00390b8>] (check_flush_dependency) from [<c0039ca0>] (flush_work+0x50/0x15c)
[<c0039ca0>] (flush_work) from [<c00c51b0>] (lru_add_drain_all+0x130/0x180)
[<c00c51b0>] (lru_add_drain_all) from [<c00f728c>] (migrate_prep+0x8/0x10)
[<c00f728c>] (migrate_prep) from [<c00bfbc4>] (alloc_contig_range+0xd8/0x338)
[<c00bfbc4>] (alloc_contig_range) from [<c00f8f18>] (cma_alloc+0xe0/0x1ac)
[<c00f8f18>] (cma_alloc) from [<c001cac4>] (__alloc_from_contiguous+0x38/0xd8)
[<c001cac4>] (__alloc_from_contiguous) from [<c001ceb4>] (__dma_alloc+0x240/0x278)
[<c001ceb4>] (__dma_alloc) from [<c001cf78>] (arm_dma_alloc+0x54/0x5c)
[<c001cf78>] (arm_dma_alloc) from [<c0355ea4>] (dmam_alloc_coherent+0xc0/0xec)
[<c0355ea4>] (dmam_alloc_coherent) from [<c039cc4c>] (ahci_port_start+0x150/0x1dc)
[<c039cc4c>] (ahci_port_start) from [<c0384734>] (ata_host_start.part.3+0xc8/0x1c8)
[<c0384734>] (ata_host_start.part.3) from [<c03898dc>] (ata_host_activate+0x50/0x148)
[<c03898dc>] (ata_host_activate) from [<c039d558>] (ahci_host_activate+0x44/0x114)
[<c039d558>] (ahci_host_activate) from [<c039f05c>] (ahci_platform_init_host+0x1d8/0x3c8)
[<c039f05c>] (ahci_platform_init_host) from [<c039e6bc>] (tegra_ahci_probe+0x448/0x4e8)
[<c039e6bc>] (tegra_ahci_probe) from [<c0347058>] (platform_drv_probe+0x50/0xac)
[<c0347058>] (platform_drv_probe) from [<c03458cc>] (driver_probe_device+0x214/0x2c0)
[<c03458cc>] (driver_probe_device) from [<c0343cc0>] (bus_for_each_drv+0x60/0x94)
[<c0343cc0>] (bus_for_each_drv) from [<c03455d8>] (__device_attach+0xb0/0x114)
[<c03455d8>] (__device_attach) from [<c0344ab8>] (bus_probe_device+0x84/0x8c)
[<c0344ab8>] (bus_probe_device) from [<c0344f48>] (deferred_probe_work_func+0x68/0x98)
[<c0344f48>] (deferred_probe_work_func) from [<c003b738>] (process_one_work+0x120/0x3f8)
[<c003b738>] (process_one_work) from [<c003ba48>] (worker_thread+0x38/0x55c)
[<c003ba48>] (worker_thread) from [<c0040f14>] (kthread+0xdc/0xf4)
[<c0040f14>] (kthread) from [<c000f778>] (ret_from_fork+0x14/0x3c)
Fix it by marking workqueues created via create*_workqueue() with
__WQ_LEGACY and disabling flush dependency checks on them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Thierry Reding <thierry.reding@gmail.com>
Link: http://lkml.kernel.org/g/20160126173843.GA11115@ulmo.nvidia.com
Fixes: fca839c00a ("workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue")
To prevent the feature check tests to run repeately, one time per
'tests/make' target/test, this patch utilizes the previously introduced
'feature-dump' make target and FEATURES_DUMP variable, making sure that
the feature checkers run only once when doing build-test for normal test
cases.
However, since standard users doesn't reuse features dump result, we'd
better give an option to check their behaviors. The above feature
should be used to make build-test faster only. Only utilize it for
build-test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454068269-235999-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make feature-dump' should give a stable result, so even 'NO_SOMETHING=1'
is given (for babeltrace, if LIBBABELTRACE=1 is not given), we should
try to detect those feature and {C,LD}FLAGS. Build or not should be
controled independent.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1454047050-204993-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a max stack trace is discovered, the stack dump is saved. In order to
not record the overhead of the stack tracer, the ip of the traced function
is looked for within the dump. The trace is started from the location of
that function. But if for some reason the ip is not found, the entire stack
trace is then truncated. That's not very useful. Instead, print everything
if the ip of the traced function is not found within the trace.
This issue showed up on s390.
Link: http://lkml.kernel.org/r/20160129102241.1b3c9c04@gandalf.local.home
Fixes: 72ac426a5b ("tracing: Clean up stack tracing and fix fentry updates")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
SVC WAKE_OUT loop is estimated 400ms during which wake_detect line
is pulled low for AP detection. On AP side we have 500ms delay
between checks. To avoid timing issues, reduce delay between
checks and raise total # of checks so that overall time for sequence
is the same.
Testing Done:
- Used for DB3.5/EVT1.5 hardware during bringup
- Regression tested on DB3.1+ES2, DB3.1+ES3
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
After SVC generates WAKE_OUT (pulling wake-detect pin low) and APB is
brought out of reset, we need to assert wake-detect again to complete
SVC WAKE_OUT logic.
Testing Done:
- Used for DB3.5/EVT1.5 hardware during bringup
- Regression tested on DB3.1+ES2, DB3.1+ES3
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Move SVC deassert reset to after wake-detect pin has been pulled
low in probe. Otherwise, SVC may trigger WAKE_OUT based on a
default high signal.
Testing Done:
- Used for DB3.5/EVT1.5 hardware during bringup
- Regression tested on DB3.1+ES2, DB3.1+ES3
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
During DB3.5 bringup, it was noted that wake_detect signal was not
properly generating SVC edge IRQ. To ensure signal goes from low
to high correctly, let's bring signal low (regardless of default
pin state).
Testing Done:
- Used for DB3.5/EVT1.5 hardware during bringup
- Regression tested on DB3.1+ES2, DB3.1+ES3
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Since kthread_create can be failed, it needs to check
whether error occurred and return error code.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Microsoft LifeCam HD-6000 (045e:076f) requires the similar quirk for
avoiding the stall due to the invalid sample rate reads.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111491
Signed-off-by: Lev Lybin <lev.lybin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 14e46e0495.
This ends up doing sysfs operations from deep in balance (where we
should be GFP_NOFS) and under heavy balance load, we're making races
against sysfs internals.
Revert it for now while we figure things out.
Signed-off-by: Chris Mason <clm@fb.com>
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are
PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as
used on Intel Baytrail so we can reuse the existing Baytrail setup code.
Add both Broadwell LPSS UART ports to the list of supported devices.
Signed-off-by: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kzalloc instead of kmalloc for struct tid_ampdu_rx to
initialize the "removed" field (all others are initialized
manually). That fixes:
UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29
load of value 2 is not a valid value for type '_Bool'
CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265
Workqueue: phy0 rt2x00usb_work_rxdone
0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007
ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500
ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032
Call Trace:
[<ffffffff8181d866>] dump_stack+0x45/0x5f
[<ffffffff8188422d>] ubsan_epilogue+0xd/0x40
[<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70
[<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730
[<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00
[<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750
[<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990
While at it, convert to use sizeof(*tid_agg_rx) instead.
Fixes: 788211d81b ("mac80211: fix RX A-MPDU session reorder timer deletion")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
[reword commit message, use sizeof(*tid_agg_rx)]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since cfg80211 frequently takes actions from its netdev notifier
call, wireless extensions messages could still be ordered badly
since the wext netdev notifier, since wext is built into the
kernel, runs before the cfg80211 netdev notifier. For example,
the following can happen:
5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: <BROADCAST,MULTICAST,UP>
link/ether
when setting the interface down causes the wext message.
To also fix this, export the wireless_nlevent_flush() function
and also call it from the cfg80211 notifier.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Beniamino reported that he was getting an RTM_NEWLINK message for a
given interface, after the RTM_DELLINK for it. It turns out that the
message is a wireless extensions message, which was sent because the
interface had been connected and disconnection while it was deleted
caused a wext message.
For its netlink messages, wext uses RTM_NEWLINK, but the message is
without all the regular rtnetlink attributes, so "ip monitor link"
prints just rudimentary information:
5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
Deleted 5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: <BROADCAST,MULTICAST,UP>
link/ether
(from my hwsim reproduction)
This can cause userspace to get confused since it doesn't expect an
RTM_NEWLINK message after RTM_DELLINK.
The reason for this is that wext schedules a worker to send out the
messages, and the scheduling delay can cause the messages to get out
to userspace in different order.
To fix this, have wext register a netdevice notifier and flush out
any pending messages when netdevice state changes. This fixes any
ordering whenever the original message wasn't sent by a notifier
itself.
Cc: stable@vger.kernel.org
Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Vbios does this for us on asic_init.
Reviewed-by: Ken Wang >Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The midi controller times-out while initializing reports, this
causes boot to take an extra 10 seconds. The device descriptor
advertises that it has an internal HID device but seems to not
actually do anything useful.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In my patch adding native DSD support for the Oppo HA-1, the wrong vendor ID got
through. This patch fixes the vendor ID and aligns the comment.
Fixes: a4eae3a506 ('ALSA: usb: Add native DSD support for Oppo HA-1')
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a couple of nasty truncation bugs lurking in the pageattr
code that can be triggered when mapping EFI regions, e.g. when we pass
a cpa->pgd pointer. Because cpa->numpages is a 32-bit value, shifting
left by PAGE_SHIFT will truncate the resultant address to 32-bits.
Viorel-Cătălin managed to trigger this bug on his Dell machine that
provides a ~5GB EFI region which requires 1236992 pages to be mapped.
When calling populate_pud() the end of the region gets calculated
incorrectly in the following buggy expression,
end = start + (cpa->numpages << PAGE_SHIFT);
And only 188416 pages are mapped. Next, populate_pud() gets invoked
for a second time because of the loop in __change_page_attr_set_clr(),
only this time no pages get mapped because shifting the remaining
number of pages (1048576) by PAGE_SHIFT is zero. At which point the
loop in __change_page_attr_set_clr() spins forever because we fail to
map progress.
Hitting this bug depends very much on the virtual address we pick to
map the large region at and how many pages we map on the initial run
through the loop. This explains why this issue was only recently hit
with the introduction of commit
a5caa209ba ("x86/efi: Fix boot crash by mapping EFI memmap
entries bottom-up at runtime, instead of top-down")
It's interesting to note that safe uses of cpa->numpages do exist in
the pageattr code. If instead of shifting ->numpages we multiply by
PAGE_SIZE, no truncation occurs because PAGE_SIZE is a UL value, and
so the result is unsigned long.
To avoid surprises when users try to convert very large cpa->numpages
values to addresses, change the data type from 'int' to 'unsigned
long', thereby making it suitable for shifting by PAGE_SHIFT without
any type casting.
The alternative would be to make liberal use of casting, but that is
far more likely to cause problems in the future when someone adds more
code and fails to cast properly; this bug was difficult enough to
track down in the first place.
Reported-and-tested-by: Viorel-Cătălin Răpițeanu <rapiteanu.catalin@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=110131
Link: http://lkml.kernel.org/r/1454067370-10374-1-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On Broxton, to make sure the reset controller works properly,
MISCBDCGE bit (bit 6) in CGCTL (0x48) of PCI configuration space
need be cleared before reset and set back to 1 after reset.
Otherwise, it may prevent the CORB/RIRB logic from being reset.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently when we boot the kernel on a mx25pdk the LCDC controller
does not show the Linux logo on boot.
This problem is well explained by Sascha Hauer:
"Unfortunately this LCD controller does not have an enable bit. The
controller starts directly when the clocks are enabled. If the clocks
are enabled when the controller is not yet programmed with proper
register values then it just goes into some undefined state. What I
suspect is that the clocks already were enabled before driver probe,
presumably by the bootloader, so the controller is already in undefined
state when entering Linux. Now by dis/enabling the ipg clock you
effectively reset the controller. Since you have programmed it with
valid register values in the mean time it starts working after this
reset."
So do as suggested and force a reset of the LCDC hardware by
enabling and disabling the IPG clock.
With this change the Linux logo can be seen on boot on a mx25pdk.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
ata_sff_hsm_move() triggers BUG if it sees a host state machine state
that it dind't expect. The risk for data corruption when the
condition occurs is low as it's highly unlikely that it would lead to
spurious completion of commands. The BUG occasionally triggered for
subtle race conditions in the driver. Let's downgrade it to WARN so
that it doesn't kill the machine unnecessarily.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
resource_size_t cannot be printed using the %x format string
when we it is defined as u64:
drivers/video/fbdev/mmp/hw/mmp_ctrl.c: In function 'mmphw_probe':
drivers/video/fbdev/mmp/hw/mmp_ctrl.c:506:22: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=]
dev_err(ctrl->dev, "%s: res %x - %x map failed\n", __func__,
^
drivers/video/fbdev/mmp/hw/mmp_ctrl.c:506:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=]
This changes the format string to %pR, which is interpreted
by the printk implementation to pretty-print a resource
structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch adds firmware compressed stream capture support
and DAI hookups for voice control firmware (based on the wm5110
implementation.)
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
wm5102 also supports the audio trace firmware, this patch adds support
for this into the wm5102 driver.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Mainly this adds DAI links for the audio trace, however, it is also
necessary to update the data IRQ handler to check more cores. We have
the handler check every core so it should not be necessary to update
this function if more compressed firmwares are added in the future.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function correct passes a dma_addr_t pointer into
dma_alloc_coherent(), but has a cast to resource_size_t, which
might be different from dma_addr_t:
drivers/video/fbdev/da8xx-fb.c: In function 'fb_probe':
drivers/video/fbdev/da8xx-fb.c:1431:10: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
This removes the cast, which avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The s6e8ax0 suspend/resume functions are hidden inside of an #ifdef
when CONFIG_PM is set to avoid unused function warnings, but they
call some other functions that nothing else calls, and we get warnings
about those:
drivers/video/fbdev/exynos/s6e8ax0.c:449:13: error: 's6e8ax0_sleep_in' defined but not used [-Werror=unused-function]
drivers/video/fbdev/exynos/s6e8ax0.c:485:13: error: 's6e8ax0_display_off' defined but not used [-Werror=unused-function]
This marks the PM functions as __maybe_unused so the compiler can
silently drop them when they are not referenced.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Update the comments around struct iommu_ops to match
current state and fix a few typos while at it.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
According to the ocfb documentation:
Fix tgdel HW param should be left margin, not right.
Fix tvdel HW param should upper margin, not lower.
This seems to fix lock issues on certain monitors (tested on a
slightly customized IP, but the FPGA guy said that it should
be the same wrt this changes).
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Acked-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch enables the tvp5150 decoder driver to be used with the media
controller framework by adding pad-level subdev operations and init the
media entity pad.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
The tvp5150 output video is interlaced so mark the format
field as alternate and reduce the height to the half.
[javier: split patch and write commit message]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Looks like the VT-d spec at intel.com got moved. Update the link.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In below commit alias DTE is set when its peripheral is
setting DTE. However there's a code bug here to wrongly
set the alias DTE, correct it in this patch.
commit e25bfb56ea
Author: Joerg Roedel <jroedel@suse.de>
Date: Tue Oct 20 17:33:38 2015 +0200
iommu/amd: Set alias DTE in do_attach/do_detach
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Mark Hounschell <markh@compro.net>
Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Joerg Roedel <jroedel@suse.de>
