Use !foo rather than (foo == NULL) as recommended by checkpatch --strict
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add or remove whitespace according to checkpatch --strict
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Place logical operators at the end of the previous line when using a multi-line
statement. Found by checkpatch --strict
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line alignment in various places as caught by checkpatch --strict.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changing the 32-bit reserved field in opa_port_data_counters_msg
to the new 'resolution' field. PMA will use resolutions to right-
shift values for LocalLinkIntegrity and LinkErrorRecovery when
computing the ErrorCounterSummary for a DataPortCounters request.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Andrea Lowe <andrea.l.lowe@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, only MTUs of VLs 0-7 are checked when calculating the maximum VL
MTU which is used to set the port MTU capability in DCC_CFG_PORT_CONFIG CSR
This can cause a port MTU capability to be set to 0 if MTUs of VLs 0-7 is 0
This would affect the VL15 traffic.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change reported unknown frame messages into a counter.
These are informational, no errors.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An SPC freeze is not an error. Remove the messages.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only warn when link up pkeys are not what we expect. Also, allow
for the pkey to already be initialized.
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, if hfi1_register_ib_device() call is unsuccessful, workqueues
are not being destroyed before bailing out. This patch fixes this issue.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provides error status counters for CceErrStatus, Send*ErrStatus,
RcvErrStatus and MISC_ERR_STATUS
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Joel Rosenzweig <joel.b.rosenzweig@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correctly reduce the number of VLs when limited by the number
of SDMA engines.
The hardware has multiple egress mechanisms, SDMA and pio, and multiples
of those. These mechanisms are chosen using the VL (8)
The fix corrects a panic issue with one of the platforms that doesn't have
enough SDMA (4) mechanisms for the typical number of VLs.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending a diagnostic packet, if the send context does not
have enough room, force a credit return and try again.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The longest quiet timeout is now 6s. Extend the driver wait to 6s.
The driver wasn't following our internal specification: 6 seconds.
This patch corrects that issue.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add one-time LCB reset on driver load to pre-emptively work
around any LCB power cycle issues.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a few incorrect header file comments in qp.h
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add aeth name syndrome decode to enhance debugging.
The IBTA RC ACK contains an ACK extended transport header.
Part of that header is the syndrome field that qualifies the RC ACK as an
ACK, NAK, or RNR NAK.
Without the patch here is the syndrome decode:
aeth syn 0x00
Here is the decode with the fix:
aeth syn 0x00 ACK
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CNP opcode decode.
Prior to this patch the trace appeared like:
<idle>-0 [001] d.h. 94062.578932: input_ibhdr: [0000:05:00.0] vl 0
lver 0 sl 0 lnh 2,LRH_BTH dlid 0003 len 6 slid 0001 op 0x80,0x80 se 0 m 0
pad 0 tver 0 pkey 0x8001 f 0 b 0 qpn 0x001234 a 0 psn 0x00000000
Note the "op 0x80,0x80".
With this patch:
<idle>-0 [000] d.h. 233975.912059: input_ibhdr: [0000:05:00.0] vl 0
lver 0 sl 0 lnh 2,LRH_BTH dlid 0015 len 6 slid 0014 op 0x80,CNP se 0 m 0
pad 0 tver 0 pkey 0x8001 f 0 b 0 qpn 0x001234 a 0 psn 0x00000000
Note the "op 0x80,CNP"
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for an automatic fallback for firmware names to support
debug-signed and production-signed firmware images.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sdma_select_engine_vl only needs to protect itself from an invalid VL.
Something higher up the stack should be warning the user when they try
to use an SL which maps to an invalid VL.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Ira Weiny <iweiny@gmail.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hfi1 driver build fails with the following error:
In function ‘handle_receive_interrupt’:
error: implicit declaration of function ‘skip_rcv_packet’ [-Werror=implicit-function-declaration]
last = skip_rcv_packet(&packet, thread);
^
This is due to the inclusion of the skip_rcv_packet() in the
CONFIG_PRESCAN_RXQ ifdef block. This function is independent of
CONFIG_PRESCAN_RXQ and should be outside this block.
Fixes: 82c2611daa ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new EPROM partition, adjusting partition placement.
Add EPROM range commands as a supserset of the partition
commands. Remove old partition commands.
Enhance EPROM erase, creating a range function and using the
largest erase (sub) commands when possible.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Read an EFI variable for the device description. Create the
infrastructure for additional variable reads.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current is_bx() will incorrectly match on other steppings.
is_a0() is removed in favor of is_ax().
Reviewed-by: Mark Debbage <mark.debbage@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Space between concantenated string elements is more human
readable and fixes the checkpatch issue:
CHECK: Concatenated strings should use spaces between elements
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rcv bubbles were improperly calculated for HFIs, fix that here.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Ira Weiny <iweiny@gmail.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed the RxCtxRHQS counter being dumped into dev_cntrs
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A link downgrade can race with link up. Avoid the race
in two ways. First, by having the downgrade application logic
take the link state mutex for all of its checking. Second, by
waiting for the link to move out of the going up state.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some systems have a single fan controlled by ACPI or some other
method.
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Show GPU load in in the debugfs output.
v2: integrate Tom's optimization
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
In I+A platform(skylake), it is controlled by intel.
v2: integrate Tom's fix
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
To avoid users accessing them before the module has finished
initializing them and make sure they are only created if
dpm has properly initialized.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in dpm module, sysfs init func move to late_init from sw_init.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Change-Id: Ice4a73212d8e3106d05f04a27043820ffd32929e
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppatomctrl.c:475:10-11: WARNING: return of 0/1 in function 'atomctrl_lookup_gpio_pin' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
CC: yanyang1 <young.yang@amd.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
