Commit graph

691,473 commits

Author SHA1 Message Date
Jenny Derzhavetz
9fd60088ff iser-target: Skip data copy if all the command data comes as immediate
Given that supporting zcopy immediate data for all IOs requires
iser driver to use its own buffer allocations, we settle with
avoiding data copy for IOs with data length of up to 8K (which
is more latency sensitive anyway).

This trims IO write latency by up to 3us and increase IOPs
by up to 40% by saving CPU time doing sg_copy_from_buffer
(8K IO size is the obvious winner here).

Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-15 15:47:31 -07:00
Jenny Derzhavetz
4366b19ca5 iser-target: Change the recv buffers posting logic
iser target batches post recv operations to avoid
the overhead of acquiring the recv queue lock and
posting a HW doorbell for each command.

We change it to be per command in order to support
zcopy immediate data for IOs that fits in the 8K
transfer boundary (in the next patch).

(Fix minor patch fuzz due to ib_mr removal - nab)

Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-15 15:47:29 -07:00
Jenny Derzhavetz
bd3792205a iser-target: Fix pending connections handling in target stack shutdown sequnce
Instead of handing a connection to the iscsi stack
for processing right after accepting (rdma_accept) we only hand
the connection to the iscsi core after we reached to a connected
state (ESTABLISHED CM event). This will prevent two error scenrios:

1. race between rdma connection teardown and iscsi login sequence
   reported by Nic in: (ce9a9fc20a "iser-target: Fix REJECT CM event
   use-after-free OOPs")

2. target stack shutdown sequence race with constant login attempts by
   multiple initiators.

We address this by maintaining two queues at the isert_np level:
- accepted: connections that were accepted but have not reached
  connected state (might get rejected, unreachable or error).
- pending: connections in connected state, but have yet to handed
  to the iscsi core for login processing. iser connections are promoted
  to the pending queue only from the accepted queue.

This way the iscsi core now will only handle functional iser connections
and once we shutdown the target stack, we look for any stales that
got left behind so we can safely release them.

Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-15 15:47:27 -07:00
Jenny Derzhavetz
ed8cb0a437 iser-target: Remove np_ prefix from isert_np members
These are always referenced from np-> so no need
for the prefix.

Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-15 15:47:25 -07:00
Jenny Derzhavetz
f27dfa1f0e iser-target: Remove unused variables
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-15 15:47:23 -07:00
Jenny Derzhavetz
3e03c4b01d iser-target: Put the reference on commands waiting for unsol data
The iscsi target core teardown sequence calls wait_conn for
all active commands to finish gracefully by:
- move the queue-pair to error state
- drain all the completions
- wait for the core to finish handling all session commands

However, when tearing down a session while there are sequenced
commands that are still waiting for unsolicited data outs, we can
block forever as these are missing an extra reference put.

We basically need the equivalent of iscsit_free_queue_reqs_for_conn()
which is called after wait_conn has returned. Address this by an
explicit walk on conn_cmd_list and put the extra reference.

Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-15 15:47:21 -07:00
Jenny Derzhavetz
a4c15cd957 iser-target: remove command with state ISTATE_REMOVE
As documented in iscsit_sequence_cmd:
/*
 * Existing callers for iscsit_sequence_cmd() will silently
 * ignore commands with CMDSN_LOWER_THAN_EXP, so force this
 * return for CMDSN_MAXCMDSN_OVERRUN as well..
 */

We need to silently finish a command when it's in ISTATE_REMOVE.
This fixes an teardown hang we were seeing where a mis-behaved
initiator (triggered by allocation error injections) sent us a
cmdsn which was lower than expected.

Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-15 15:47:19 -07:00
Sowmini Varadhan
d5566fd72e rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats
Many commonly used functions like getifaddrs() invoke RTM_GETLINK
to dump the interface information, and do not need the
the AF_INET6 statististics that are always returned by default
from rtnl_fill_ifinfo().

Computing the statistics can be an expensive operation that impacts
scaling, so it is desirable to avoid this if the information is
not needed.

This patch adds a the RTEXT_FILTER_SKIP_STATS extended info flag that
can be passed with netlink_request() to avoid statistics computation
for the ifinfo path.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 15:25:02 -07:00
Sjoerd Simons
892aa01df2 net: stmmac: Use msleep rather then udelay for reset delay
The reset delays used for stmmac are in the order of 10ms to 1 second,
which is far too long for udelay usage, so switch to using msleep.

Practically this fixes the PHY not being reliably detected in some cases
as udelay wouldn't actually delay for long enough to let the phy
reliably be reset.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 15:05:29 -07:00
Roopa Prabhu
d64f69b037 rtnetlink: catch -EOPNOTSUPP errors from ndo_bridge_getlink
problem reported:
	kernel 4.1.3
	------------
	# bridge vlan
	port	vlan ids
	eth0	 1 PVID Egress Untagged
	 	90
	 	91
	 	92
	 	93
	 	94
	 	95
	 	96
	 	97
	 	98
	 	99
	 	100

	vmbr0	 1 PVID Egress Untagged
	 	94

	kernel 4.2
	-----------
	# bridge vlan
	port	vlan ids

ndo_bridge_getlink can return -EOPNOTSUPP when an interfaces
ndo_bridge_getlink op is set to switchdev_port_bridge_getlink
and CONFIG_SWITCHDEV is not defined. This today can happen to
bond, rocker and team devices. This patch adds -EOPNOTSUPP
checks after calls to ndo_bridge_getlink.

Fixes: 85fdb95672 ("switchdev: cut over to new switchdev_port_bridge_getlink")
Reported-by: Alexandre DERUMIER <aderumier@odiso.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 15:03:57 -07:00
Simon Guinot
daf158d0d5 net: mvneta: fix DMA buffer unmapping in mvneta_rx()
This patch fixes a regression introduced by the commit a84e328941
("net: mvneta: fix refilling for Rx DMA buffers"). Due to this commit
the newly allocated Rx buffers are DMA-unmapped in place of those passed
to the networking stack. Obviously, this causes data corruptions.

This patch fixes the issue by ensuring that the right Rx buffers are
DMA-unmapped.

Reported-by: Oren Laskin <oren@igneous.io>
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Fixes: a84e328941 ("net: mvneta: fix refilling for Rx DMA buffers")
Cc: <stable@vger.kernel.org> # v3.8+
Tested-by: Oren Laskin <oren@igneous.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:54:50 -07:00
David S. Miller
244b7f4324 Merge branch 'ip6tunnel_dst'
Martin KaFai Lau says:

====================
ipv6: Fix dst_entry refcnt bugs in ip6_tunnel

v4:
- Fix a compilation error in patch 5 when CONFIG_LOCKDEP is turned on and
  re-test it

v3:
- Merge a 'if else if' test in patch 4
- Use rcu_dereference_protected in patch 5 to fix a sparse check when
  CONFIG_SPARSE_RCU_POINTER is enabled

v2:
- Add patch 4 and 5 to remove the spinlock

v1:
This patch series is to fix the dst refcnt bugs in ip6_tunnel.

Patch 1 and 2 are the prep works.  Patch 3 is the fix.

I can reproduce the bug by adding and removing the ip6gre tunnel
while running a super_netperf TCP_CRR test.  I get the following
trace by adding WARN_ON_ONCE(newrefcnt < 0) to dst_release():

[  312.760432] ------------[ cut here ]------------
[  312.774664] WARNING: CPU: 2 PID: 10263 at net/core/dst.c:288 dst_release+0xf3/0x100()
[  312.776041] Modules linked in: k10temp coretemp hwmon ip6_gre ip6_tunnel tunnel6 ipmi_devintf ipmi_ms\
ghandler ip6table_filter ip6_tables xt_NFLOG nfnetlink_log nfnetlink xt_comment xt_statistic iptable_fil\
ter ip_tables x_tables nfsv3 nfs_acl nfs fscache lockd grace mptctl netconsole autofs4 rpcsec_gss_krb5 a\
uth_rpcgss oid_registry sunrpc ipv6 dm_mod loop iTCO_wdt iTCO_vendor_support serio_raw rtc_cmos pcspkr i\
2c_i801 i2c_core lpc_ich mfd_core ehci_pci ehci_hcd e1000e mlx4_en ptp pps_core vxlan udp_tunnel ip6_udp\
_tunnel mlx4_core sg button ext3 jbd mpt2sas raid_class
[  312.785302] CPU: 2 PID: 10263 Comm: netperf Not tainted 4.2.0-rc8-00046-g4db9b63-dirty #15
[  312.791695] Hardware name: Quanta Freedom /Windmill-EP, BIOS F03_3B04 09/12/2013
[  312.792965]  ffffffff819dca2c ffff8811dfbdf6f8 ffffffff816537de ffff88123788fdb8
[  312.794263]  0000000000000000 ffff8811dfbdf738 ffffffff81052646 ffff8811dfbdf768
[  312.795593]  ffff881203a98180 00000000ffffffff ffff88242927a000 ffff88120a2532e0
[  312.796946] Call Trace:
[  312.797380]  [<ffffffff816537de>] dump_stack+0x45/0x57
[  312.798288]  [<ffffffff81052646>] warn_slowpath_common+0x86/0xc0
[  312.799699]  [<ffffffff8105273a>] warn_slowpath_null+0x1a/0x20
[  312.800852]  [<ffffffff8159f9b3>] dst_release+0xf3/0x100
[  312.801834]  [<ffffffffa03f1308>] ip6_tnl_dst_store+0x48/0x70 [ip6_tunnel]
[  312.803738]  [<ffffffffa03fd0b6>] ip6gre_xmit2+0x536/0x720 [ip6_gre]
[  312.804774]  [<ffffffffa03fd40a>] ip6gre_tunnel_xmit+0x16a/0x410 [ip6_gre]
[  312.805986]  [<ffffffff8159934b>] dev_hard_start_xmit+0x23b/0x390
[  312.808810]  [<ffffffff815a2f5f>] ? neigh_destroy+0xef/0x140
[  312.809843]  [<ffffffff81599a6c>] __dev_queue_xmit+0x48c/0x4f0
[  312.813931]  [<ffffffff81599ae3>] dev_queue_xmit_sk+0x13/0x20
[  312.814993]  [<ffffffff815a0832>] neigh_direct_output+0x12/0x20
[  312.817448]  [<ffffffffa021d633>] ip6_finish_output2+0x183/0x460 [ipv6]
[  312.818762]  [<ffffffff81306fc5>] ? find_next_bit+0x15/0x20
[  312.819671]  [<ffffffffa021fd79>] ip6_finish_output+0x89/0xe0 [ipv6]
[  312.820720]  [<ffffffffa021fe14>] ip6_output+0x44/0xe0 [ipv6]
[  312.821762]  [<ffffffff815c8809>] ? nf_hook_slow+0x69/0xc0
[  312.823123]  [<ffffffffa021d232>] ip6_xmit+0x242/0x4c0 [ipv6]
[  312.824073]  [<ffffffffa021c9f0>] ? ac6_proc_exit+0x20/0x20 [ipv6]
[  312.825116]  [<ffffffffa024c751>] inet6_csk_xmit+0x61/0xa0 [ipv6]
[  312.826127]  [<ffffffff815eb590>] tcp_transmit_skb+0x4f0/0x9b0
[  312.827441]  [<ffffffff815ed267>] tcp_connect+0x637/0x7a0
[  312.828327]  [<ffffffffa0245906>] tcp_v6_connect+0x2d6/0x550 [ipv6]
[  312.829581]  [<ffffffff81606f05>] __inet_stream_connect+0x95/0x2f0
[  312.830600]  [<ffffffff810ae13a>] ? hrtimer_try_to_cancel+0x1a/0xf0
[  312.833456]  [<ffffffff812fba19>] ? timerqueue_add+0x59/0xb0
[  312.834407]  [<ffffffff81607198>] inet_stream_connect+0x38/0x50
[  312.835886]  [<ffffffff8157cb17>] SYSC_connect+0xb7/0xf0
[  312.840035]  [<ffffffff810af6d3>] ? do_setitimer+0x1b3/0x200
[  312.840983]  [<ffffffff810af75a>] ? alarm_setitimer+0x3a/0x70
[  312.841941]  [<ffffffff8157d7ae>] SyS_connect+0xe/0x10
[  312.842818]  [<ffffffff81659297>] entry_SYSCALL_64_fastpath+0x12/0x6a
[  312.844206] ---[ end trace 43f3ecd86c3b1313 ]---
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:46 -07:00
Martin KaFai Lau
70da5b5c53 ipv6: Replace spinlock with seqlock and rcu in ip6_tunnel
This patch uses a seqlock to ensure consistency between idst->dst and
idst->cookie.  It also makes dst freeing from fib tree to undergo a
rcu grace period.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:05 -07:00
Martin KaFai Lau
8e3d5be736 ipv6: Avoid double dst_free
It is a prep work to get dst freeing from fib tree undergo
a rcu grace period.

The following is a common paradigm:
if (ip6_del_rt(rt))
	dst_free(rt)

which means, if rt cannot be deleted from the fib tree, dst_free(rt) now.
1. We don't know the ip6_del_rt(rt) failure is because it
   was not managed by fib tree (e.g. DST_NOCACHE) or it had already been
   removed from the fib tree.
2. If rt had been managed by the fib tree, ip6_del_rt(rt) failure means
   dst_free(rt) has been called already.  A second
   dst_free(rt) is not always obviously safe.  The rt may have
   been destroyed already.
3. If rt is a DST_NOCACHE, dst_free(rt) should not be called.
4. It is a stopper to make dst freeing from fib tree undergo a
   rcu grace period.

This patch is to use a DST_NOCACHE flag to indicate a rt is
not managed by the fib tree.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:05 -07:00
Martin KaFai Lau
cdf3464e6c ipv6: Fix dst_entry refcnt bugs in ip6_tunnel
Problems in the current dst_entry cache in the ip6_tunnel:

1. ip6_tnl_dst_set is racy.  There is no lock to protect it:
   - One major problem is that the dst refcnt gets messed up. F.e.
     the same dst_cache can be released multiple times and then
     triggering the infamous dst refcnt < 0 warning message.
   - Another issue is the inconsistency between dst_cache and
     dst_cookie.

   It can be reproduced by adding and removing the ip6gre tunnel
   while running a super_netperf TCP_CRR test.

2. ip6_tnl_dst_get does not take the dst refcnt before returning
   the dst.

This patch:
1. Create a percpu dst_entry cache in ip6_tnl
2. Use a spinlock to protect the dst_cache operations
3. ip6_tnl_dst_get always takes the dst refcnt before returning

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:05 -07:00
Martin KaFai Lau
f230d1e891 ipv6: Rename the dst_cache helper functions in ip6_tunnel
It is a prep work to fix the dst_entry refcnt bugs in
ip6_tunnel.

This patch rename:
1. ip6_tnl_dst_check() to ip6_tnl_dst_get() to better
   reflect that it will take a dst refcnt in the next patch.
2. ip6_tnl_dst_store() to ip6_tnl_dst_set() to have a more
   conventional name matching with ip6_tnl_dst_get().

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:04 -07:00
Martin KaFai Lau
a3c119d392 ipv6: Refactor common ip6gre_tunnel_init codes
It is a prep work to fix the dst_entry refcnt bugs in ip6_tunnel.

This patch refactors some common init codes used by both
ip6gre_tunnel_init and ip6gre_tap_init.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 14:53:04 -07:00
James Hogan
3dce23eb88 metag: Turn irq_ctx_* macros into static inlines
The irq_ctx_init()/irq_ctx_exit() functions are only used for 4KiB
stacks, otherwise they are implemented as an empty macro. To prevent
future bit rottage due to the cpu argument not being type checked,
convert the macros to empty static inline functions.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
2015-09-15 22:52:47 +01:00
James Hogan
928df02bd4 metag: SMP: Fix 4KiB stack setup on secondary CPUs
Back in early 2008, 4KiB stack support was added to reduce memory
consumption on workloads with lots of threads, using a separate IRQ
stack per CPU to alleviate stack pressure. However the SMP code added a
year and a half later didn't set up the IRQ stack when bringing up
secondary CPUs, resulting in a crash when SMP is configured with 4KiB
stacks, as soon as the first interrupt arrived on a secondary CPU.

Fix with calls to irq_ctx_exit()/irq_ctx_exit() when bringing up/down a
CPU.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
2015-09-15 22:52:47 +01:00
David Woodhouse
09a77a8852 modsign: Fix GPL/OpenSSL licence incompatibility
The GPL does not permit us to link against the OpenSSL library. Use
LGPL for sign-file and extract-file instead.

[ The whole "openssl isn't compatible with gpl" is really just
  fear-mongering, but there's no reason not to make modsign LGPL, so
  nobody cares.  - Linus ]

Reported-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-15 13:54:21 -07:00
David S. Miller
ad1e7b97b3 cdc: Fix build warning.
In file included from drivers/usb/gadget/function/u_serial.h:16:0,
                    from drivers/usb/gadget/function/f_acm.c:23:
>> include/linux/usb/cdc.h:47:5: warning: 'struct usb_interface' declared inside parameter list
        int buflen);
        ^
>> include/linux/usb/cdc.h:47:5: warning: its scope is only this definition or declaration, which is probably not what you want

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 13:25:03 -07:00
Joe Perches
8b711d6db5 mv643xx_eth: Neaten mv643xx_eth_program_multicast_filter
The code around the allocation and loops are a bit obfuscated.

Neaten it by using:

o kcalloc with decimal count and sizeof(u32)
o Decimal loop indexing and i++ not i += 4
o A promiscuous block using a similar style
  to the multicast block
o Remove unnecessary variables

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:49:11 -07:00
David S. Miller
29feb66a9a Merge branch 'xgene-2nd-10gbe-port'
Iyappan Subramanian says:

====================
driver: net: xgene: Enable 2nd 10GbE port on APM X-Gene SoC

This patch adds support for 2nd 10GbE on APM X-Gene SoC
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:47:47 -07:00
Iyappan Subramanian
e63c7a0979 dtb: xgene: Add 2nd 10GbE node
Adding the second 10GbE dt node for APM X-Gene SoC device tree

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:47:46 -07:00
Iyappan Subramanian
149e9ab495 driver: net: xgene: Add support for 2nd 10GbE port
Adding support for the second 10GbE port on APM X-Gene SoC

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:47:46 -07:00
Oliver Neukum
7b6ee48d3f cdc-phonet: use common parser
This moves cdc-phonet to the common parser for CDC users
to reduce code duplication.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:43:49 -07:00
Oliver Neukum
8492ed45aa qmi-wwan: use common parser
This moves qmi-wwan to the common parser for CDC user
to reduce code duplication.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:43:38 -07:00
Oliver Neukum
823bd34334 cdc-ether: switch to common CDC parser
This patch uses the common parser to parse extra CDC
headers in order to reduce code duplication.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:43:27 -07:00
Oliver Neukum
77b0a09967 cdc-ncm: use common parser
This moves cdc-ncm to the common parser for CDC user
to reduce code duplication.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:43:19 -07:00
Oliver Neukum
c40a2c8817 CDC: common parser for extra headers
CDC drivers all implement their own parser for the extra headers.
This patch fixes the code duplication introducing a single common
parser in usbnet.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:43:11 -07:00
Mugunthan V N
1d147ccbfc drivers: net: cpsw: Add support to drive gpios for ethernet to be functional
In DRA72x EVM, by default slave 1 is connected to the onboard
phy, but slave 2 pins are also muxed with video input module
which is controlled by pcf857x gpio and currently to select slave
0 to connect to phy gpio hogging is used, but with
omap2plus_defconfig the pcf857x gpio is built as module. So when
using NFS on DRA72x EVM, board doesn't boot as gpio hogging do
not set proper gpio state to connect slave 0 to phy as it is
built as module and you do not see any errors for not setting
gpio and just mentions dhcp reply not got.

To solve this issue, introducing "mode-gpios" in DT when gpio
based muxing is required. This will throw a warning when gpio
get fails and returns probe defer. When gpio-pcf857x module is
installed, cpsw probes again and ethernet becomes functional.
Verified this on DRA72x with pcf as module and ramdisk.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:38:01 -07:00
David S. Miller
6e75f3c39d Merge branch 'dsa-mv88e6xxx-ATU'
Vivien Didelot says:

====================
net: dsa: mv88e6xxx: improve ATU move operations

This patchset completes the set of available Address Translation Unit
operations.

These Marvell switches have 4 operations to flush or (re)move, all or
only non-static MAC addresses, from the entire set of databases or from
just a particular one.

The first 3 patches introduce a generic _mv88e6xxx_atu_flush_move
function. The 4 remaining patches update a few FID operations in the
driver on setup, when a port join or leave a VLAN, or change state.

This is a step forward improving the hardware bridging support in DSA
and 88E6352-compatible switches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:04:22 -07:00
Vivien Didelot
2b8157b1c2 net: dsa: mv88e6xxx: remove all MACs when disabling a port
When we're moving a port from Learning or Forwarding state to Disabled
or Blocking or Listening state, remove all non-static MAC addresses
mapped to this port in the entire set of databases, not only one.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:04:22 -07:00
Vivien Didelot
9f4d55d286 net: dsa: mv88e6xxx: remove addresses when a port leaves a VLAN
Add a new _mv88e6xxx_atu_move function to prepare the ATU data register
for the move operation. The ports vector will contain the source port
and destination port of the Move operation. If the destination port is
0xF, the MAC addresses mapped to the source port are removed for the
address database(s).

Then add a _mv88e6xxx_atu_remove wrapper to remove the MAC addresses
from a VLAN database that are mapped to a given port, when it leaves it.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:04:22 -07:00
Vivien Didelot
7c400018c0 net: dsa: mv88e6xxx: flush all addresses when adding a VLAN
When choosing an address database for a new VLAN, flush every entries,
not only the non-static ones.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:04:21 -07:00
Vivien Didelot
c161d0a5ed net: dsa: mv88e6xxx: flush ATU on initial setup
Purge all MAC addresses from the entire set of address databases when
the driver initializes the device.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:04:21 -07:00
Vivien Didelot
7fb5e75515 net: dsa: mv88e6xxx: rework ATU Flush operation
These Marvell switches have 4 operations to flush or (re)move, all or
only non-static MAC addresses, from the entire set of databases or from
just a particular one.

The value of the EntryState bits will determine if the operation is
either a Flush (0x0) or a Move (0xF).

When moving entries from one port to another, entries will be removed if
the destination port is 0xF.

This patch renames these operations for consistency, add a new generic
_mv88e6xxx_atu_flush_move function, and change _mv88e6xxx_flush_fid to
use it.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:04:21 -07:00
Vivien Didelot
37705b7315 net: dsa: mv88e6xxx: extract ATU data write access
Other ATU commands need to write the ATU data register. To ease the
introduction of such commands, extract the ATU data write access from
_mv88e6xxx_atu_load to its own function.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:04:21 -07:00
Vivien Didelot
70cc99d10c net: dsa: mv88e6xxx: extract FID write from ATU command
Not every ATU commands apply to an FID, thus remove the FID writing from
mv88e6xxx_atu_cmd and write it explicitly where needed, in order to ease
introduction of such commands.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:04:21 -07:00
David Ahern
c36ba6603a net: Allow user to get table id from route lookup
rt_fill_info which is called for 'route get' requests hardcodes the
table id as RT_TABLE_MAIN which is not correct when multiple tables
are used. Use the newly added table id in the rtable to send back
the correct table similar to what is done for IPv6.

To maintain current ABI a new request flag, RTM_F_LOOKUP_TABLE, is
added to indicate the actual table is wanted versus the hardcoded
response.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:01:41 -07:00
David Ahern
b7503e0cdb net: Add FIB table id to rtable
Add the FIB table id to rtable to make the information available for
IPv4 as it is for IPv6.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:01:41 -07:00
David Ahern
d08c4f3554 net: Refactor rtable initialization
All callers to rt_dst_alloc have nearly the same initialization following
a successful allocation. Consolidate it into rt_dst_alloc.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15 12:01:40 -07:00
Bjorn Helgaas
237865f195 PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
Revert dff22d2054 ("PCI: Call pci_read_bridge_bases() from core instead
of arch code").

Reading PCI bridge windows is not arch-specific in itself, but there is PCI
core code that doesn't work correctly if we read them too early.  For
example, Hannes found this case on an ARM Freescale i.mx6 board:

  pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
  pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window)
  pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000]
  pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000]
  pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100]

The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs
0x204100 of space, and mem windows are megabyte-aligned.

Bus sizing can increase a bridge window size, but never *decrease* it (see
d65245c329 ("PCI: don't shrink bridge resources")).  Prior to
dff22d2054, ARM didn't read bridge windows at all, so the "original size"
was zero, and we assigned a 3MB window.

After dff22d2054, we read the bridge windows before sizing the bus.  The
firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since
we never decrease the size, we kept 16MB even though we only needed 3MB.
But 16MB doesn't fit in the host bridge aperture, so we failed to assign
space for the window and the downstream devices.

I think this is a defect in the PCI core: we shouldn't rely on the firmware
to assign sensible windows.

Ray reported a similar problem, also on ARM, with Broadcom iProc.

Issues like this are too hard to fix right now, so revert dff22d2054.

Reported-by: Hannes <oe5hpm@gmail.com>
Reported-by: Ray Jui <rjui@broadcom.com>
Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com
Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-09-15 13:18:04 -05:00
Rui Miguel Silva
2498050b03 greybus: svc: fix endianness for svc message
Some fields in svc request were not being set with the correct
endianness, which will trigger the following sparse issues as example:

greybus/svc.c:116:22: warning: incorrect type in assignment (different base types)
greybus/svc.c:116:22:    expected unsigned short [unsigned] [assigned] [usertype] attr
greybus/svc.c:116:22:    got restricted __le16 [usertype] <noident>

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-09-15 09:05:33 -07:00
Russell King
fecfdb2db8 drm/armada: factor out retirement of old fb
We have two identical places in the overlay code which retire the drm
framebuffer.  Factor these out into a common function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15 16:26:50 +01:00
Russell King
28a2aebed6 drm/armada: rename overlay identifiers
Include an _ovl infix into the overlay identifiers to separate them from
the primary plane.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15 16:26:50 +01:00
Russell King
709ffd82fc drm/armada: redo locking and atomics for armada_drm_crtc_complete_frame_work()
We can do better with armada_drm_crtc_complete_frame_work() - we can
avoid taking the event lock unless a call to drm_send_vblank_event()
is required, and using cmpxchg() and xchg(), we can eliminate the
locking around dcrtc->frame_work entirely.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15 16:26:50 +01:00
Russell King
e0ac5e9b4b drm/armada: disable CRTC clock during DPMS
When the CRTC is in low power mode, it isn't running, and so there's
no point keeping the CRTC clock enabled.  Disable the CRTC clock during
DPMS.

We need to re-enable it in the mode_set callback to ensure that the
variant's compute_clock() continues to see its clock in the expected
state (enabled).

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15 16:26:50 +01:00
Russell King
f8e1406982 drm/armada: use drm_plane_force_disable() to disable the overlay plane
Use drm_plane_force_disable() to disable the overlay plane on a mode_set
rather than coding this ourselves.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15 16:26:50 +01:00
Russell King
7c8f7e1abc drm/armada: move vbl code into armada_crtc
Our vblank event code belongs in armada_crtc.c rather than the core of
the driver.  Move it there.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15 16:26:49 +01:00