Commit graph

691,473 commits

Author SHA1 Message Date
Viresh Kumar
0a12a187fd greybus: usb: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
a94e144864 greybus: uart: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
3fb0c8f516 greybus: spi: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
7071ca1df5 greybus: sdio: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
f06eda1b17 greybus: raw: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
2e93d02c18 greybus: pwm: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
47d3cfbbad greybus: loopback: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
d8886f4a06 greybus: i2c: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
2dad338c9c greybus: hid: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
03490fdbe7 greybus: gpio: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
507d75c4f4 greybus: control: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
f8cbc30de0 greybus: battery: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Viresh Kumar
9937a60a06 greybus: audio: Drop get_version support
This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 19:33:05 -07:00
Geert Uytterhoeven
60c0745a80 ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 11:15:28 +09:00
Geert Uytterhoeven
4b31bad51f ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 11:15:27 +09:00
Geert Uytterhoeven
797a0626e0 ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.  Notable
exceptions are the "display" and "sound" nodes, which represent multiple
SoC devices, each having their own MSTP clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 11:15:27 +09:00
Geert Uytterhoeven
484adb0058 ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.  Notable
exceptions are the "display" and "sound" nodes, which represent multiple
SoC devices, each having their own MSTP clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 11:15:27 +09:00
Geert Uytterhoeven
33c3632a3f ARM: shmobile: r8a7779 dtsi: Add CPG/MSTP Clock Domain
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 11:15:26 +09:00
Geert Uytterhoeven
a670f3667a ARM: shmobile: r8a7778 dtsi: Add CPG/MSTP Clock Domain
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.  A notable
exception is the "sound" node, which represents multiple SoC devices,
each having their own MSTP clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 11:15:26 +09:00
Geert Uytterhoeven
cbe1f83818 ARM: shmobile: r7s72100 dtsi: Add CPG/MSTP Clock Domain
Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.

Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock.  This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 11:15:26 +09:00
Simon Horman
3f3f0ea0af Merge branch 'clk-for-v4.3' into dt-for-v4.3 2015-08-12 11:15:19 +09:00
Geert Uytterhoeven
f04b486d34 clk: shmobile: rz: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the RZ Clock Pulse Generator (CPG) driver
using the generic PM Domain.  This allows to power-manage the module
clocks of SoC devices that are part of the CPG/MSTP Clock Domain using
Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:28 +09:00
Geert Uytterhoeven
63e05d9365 clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the R-Car Gen2 Clock Pulse Generator (CPG)
driver using the generic PM Domain.  This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:28 +09:00
Geert Uytterhoeven
b31fc90c14 clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the R-Car H1 Clock Pulse Generator (CPG)
driver using the generic PM Domain.  This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Also update the reg property in the DT binding doc example to match the
actual dtsi, which uses #address-cells and #size-cells == 1, not 2.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:27 +09:00
Geert Uytterhoeven
8bc964aa25 clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the R-Car M1A Clock Pulse Generator (CPG)
driver using the generic PM Domain.  This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:27 +09:00
Geert Uytterhoeven
752b5ed5f6 clk: shmobile: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the Clock Pulse Generator (CPG) Module Stop
(MSTP) Clocks driver using the generic PM Domain.  This allows to
power-manage the module clocks of SoC devices that are part of the
CPG/MSTP Clock Domain using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a
proper "power-domains" property.

The CPG/MSTP Clock Domain code will scan such devices for clocks that
are suitable for power-managing the device, by looking for a clock that
is compatible with "renesas,cpg-mstp-clocks".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:26 +09:00
Viresh Kumar
7ba26a8ced greybus: connection: request protocol version before initializing connection
This can (should) be done from a common place as its required for most
of the protocols. Do it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 17:53:43 -07:00
Viresh Kumar
d653f4b191 greybus: connection: Save major/minor supported by module
Save major/minor number supported by the module inside connection
structure, as this can be used later.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 17:53:43 -07:00
Viresh Kumar
2b11a45d29 greybus: define greybus wide protocol request numbers
Some request numbers (like invalid and get_version) are same across all
protocols. Create common macros for them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 17:48:32 -07:00
Viresh Kumar
1869065902 greybus: connection: disconnect connection on failures during initialization
Its possible for connection_init() to fail, in such cases the
disconnected event must be sent to the module.

It is missing currently, fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 17:48:32 -07:00
Viresh Kumar
0c32d2a5b2 greybus: svc: error out only for smaller payloads received
!= was used in place of <, while comparing expected and actual payload
size. The module may be running a higher version of the protocol and
might have some extra fields (towards the end) in the structure, and the
AP needs to ignore them.

This also updates the print (expected-payload-size <
actual-payload-size), when the size doesn't match for requests received
by the module. This gives more details required for debugging.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 17:46:57 -07:00
Viresh Kumar
10c7ae04e3 greybus: audio: Add '<' to the print message for short messages
This increases readability a bit more, as it tells which value is actual
size and which one is expected size.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 17:46:57 -07:00
Viresh Kumar
33f06a75ee greybus: svc: Remove FIXME for firmware download
Its handled by the firmware driver now, drop the FIXME comment from svc
code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2015-08-11 17:46:57 -07:00
Krzysztof Kozlowski
2b347c6494 ARM: exynos_defconfig: Enable cpufreq-dt driver
With the latest patches the cpufreq-dt can be used on multiple
Exynos SoCs: 3250, 4210, 4212, 4412 and 5250.

Enable it along with default ondemand governor to conserve the energy,
reduce temperature while maintaining acceptable performance.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-08-12 08:17:31 +09:00
Javier Martinez Canillas
c3e71f4b5f ARM: multi_v7_defconfig: Enable max77802 regulator
The Exynos5420 based Peach Pit and Exynos5800 based Peach Pi Chromebooks
use the Maxim max77802 Power Management IC (PMIC). This PMIC has besides
other devices, a set of regulators that can be controller over I2C.

Commit f3caa529c6 ("ARM: multi_v7_defconfig: Enable max77802 regulator,
rtc and clock drivers") was supposed to enable the config option for the
regulator driver as a module but the final version that landed did not
include this. The commit was modified and the REGULATOR_MAX77802 removed
since it was thought to be useless.

Unfortunately that's not the case for the mentioned reason above so this
patch enables the needed Kconfig option.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: fixed ordering according to make savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-08-12 08:15:02 +09:00
Mauro Carvalho Chehab
ca05189716 [media] c8sectpfe: use a new Kconfig menu for DVB platform drivers
While this is the first DVB platform drivers, let's keep the
Kconfig options well organized, adding it on its own DVB menu.

Of course, it should depend on MEDIA_DIGITAL_TV_SUPPORT, as
this enables all DVB-related menus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 19:28:23 -03:00
Mauro Carvalho Chehab
7d0ddc91c8 [media] tda10071: use div_s64() when dividing a s64 integer
Otherwise, it will break on 32 bits archs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 19:19:30 -03:00
Mauro Carvalho Chehab
53cc7c9043 [media] c8sectpfe: fix pinctrl dependencies
compiling on some archs fail with:

drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:540:8: error: implicit declaration of function ‘pinctrl_select_state’ [-Werror=implicit-function-declaration]
  ret = pinctrl_select_state(fei->pinctrl, tsin->pstate);

That's due the need of including pinctrl.h header and because
CONFIG_PINCTRL needs to be true.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 19:19:08 -03:00
Linus Torvalds
58ccab9134 Leonidas Spyropoulos found that modules like nouveau were being unselected
by make localmodconfig even though their configs were set and the module
 was loaded and visible by lsmod. The reason for this was because
 streamline-config.pl only looks at Makefiles, and not Kbuild files. As
 these modules use Kbuild for their names, they too need to be checked
 by localmodconfig. This was fixed by Richard Weinberger.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVymvhAAoJEEjnJuOKh9ldSM4IAJlSMMqJ3cfYFBBpEPXc6cKw
 1hSgbX3FF8BDk/YKskBYm3qmFPTNZT/lLA/lG5w5Yt2Nf3jWKgVou/j1f0sboigl
 9fkoXgUXBRi8myubWHLAqvsNCxCLjTTjXRV+AWxTiPaGh6vnKX7393WFdvlLKhQz
 CVLRzbPfvVqSH+R1oxAeapmQ8TA3A7IPW5v1HtkrnWXqJOt1A1/4UnZ+Es/jgd7L
 1Syvf26C3kseWcqeUXIrvOBa4AgDS4kR8pdZJpvvSWbQRgebgEMH6gEk5jyI4JVd
 6RpoTUSgVwhFof6cblvlNs9ROZYCUJLzlxgiDD2tOYIwtrtc23QgY8a+WEE2eG8=
 =4S3x
 -----END PGP SIGNATURE-----

Merge tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig fix from Steven Rostedt:
 "Leonidas Spyropoulos found that modules like nouveau were being
  unselected by make localmodconfig even though their configs were set
  and the module was loaded and visible by lsmod.

  The reason for this was because streamline-config.pl only looks at
  Makefiles, and not Kbuild files.  As these modules use Kbuild for
  their names, they too need to be checked by localmodconfig.  This was
  fixed by Richard Weinberger"

* tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Use Kbuild files too
2015-08-11 15:13:41 -07:00
Daniel Wagner
9f61668073 tracing: Allow triggers to filter for CPU ids and process names
By extending the filter rules by more generic fields
we can write triggers filters like

  echo 'stacktrace if cpu == 1' > \
	/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger

or

  echo 'stacktrace if comm == sshd'  > \
	/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger

CPU and COMM are not part of struct trace_entry. We could add the two
new fields to ftrace_common_field list and fix up all depending
sides. But that looks pretty ugly. Another thing I would like to
avoid that the 'format' file contents changes.

All this can be avoided by introducing another list which contains
non field members of struct trace_entry.

Link: http://lkml.kernel.org/r/1439210146-24707-1-git-send-email-daniel.wagner@bmw-carit.de

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-08-11 18:01:06 -04:00
Richard Weinberger
c0ddc8c745 localmodconfig: Use Kbuild files too
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.

Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at

Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-08-11 17:34:35 -04:00
David S. Miller
28eaad7504 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:

====================
pull request: bluetooth 2015-08-11

Here's an important regression fix for the 4.2-rc series that ensures
user space isn't given invalid LTK values. The bug essentially prevents
the encryption of subsequent LE connections, i.e. makes it impossible to
pair devices over LE.

Let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11 14:16:07 -07:00
Shraddha Barke
2696f495bd [media] Staging: media: lirc: use USB API functions rather than constants
This patch introduces the use of the function usb_endpoint_type.

The Coccinelle semantic patch that makes these changes is as follows:

@@ struct usb_endpoint_descriptor *epd; @@

- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 18:00:30 -03:00
pradheep
7229f8c143 [media] staging:media:lirc Remove the extra braces in if statement of lirc_imon
This patche removes the extra braces found in
drivers/staging/media/lirc/lirc_imon.c to fix the warning thrown by
checkpatch.pl

Signed-off-by: Pradheep Shrinivasan <pradheep.sh@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 17:59:35 -03:00
Kishon Vijay Abraham I
73c8f0cbb0 ARM: dts: am57xx-evm: Add 'gpios' property with gpio2_8
gpio2_8 is connected to the PCIe_RESETn line and it has to be driven low to
reset the PCIe cards.  Add gpios property to PCIe DT node.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2015-08-11 15:59:16 -05:00
Zahari Doychev
5473387b93 [media] coda: drop zero payload bitstream buffers
The buffers with zero payload are now dumped in coda_fill_bitstream and not
passed to coda_bitstream_queue. This avoids unnecessary fifo addition and
buffer sequence counter increment.

Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 17:58:25 -03:00
Kishon Vijay Abraham I
78bdcad05e PCI: dra7xx: Add support to make GPIO drive PERST# line
The PERST# line in am57x-evm is connected to a GPIO line and PERST# should
be driven high to indicate the clocks are stable (As per Figure 2-10: Power
Up of the PCIe CEM spec 3.0).

Add support to make GPIO drive PERST# line.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-11 15:57:34 -05:00
Javier Martinez Canillas
efb4b8b60d [media] staging: media: lirc: Export I2C module alias information
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 17:57:09 -03:00
Javier Martinez Canillas
ed8d1cf07c [media] Export I2C module alias information in missing drivers
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 17:51:28 -03:00
Kishon Vijay Abraham I
389c7094ec PCI: dra7xx: Clear MSE bit during suspend so clocks will idle
DRA7xx requires the MSE bit to be cleared to set the master in standby
mode.  (In DRA7xx TRM_vE, section 24.9.4.5.2.2.1 PCIe Controller Master
Standby Behavior advises to use the clearing of the local MSE bit to set
the master in standby.  Without this some of the clocks do not idle).

Clear the MSE bit on suspend and enable it on resume.  Clearing MSE bit is
required to get clocks to be idled after suspend.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
2015-08-11 15:50:20 -05:00