Make sure connection is fully initialised before registering the
connection device and adding it to the host-device and bundle lists.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add connection variable to greybus_message_sent.
This will be put to more use by a follow-up up patch.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make the operation work queue single threaded.
The operation work queue was meant to be single threaded, but due to a
missing flag instead allowed one active task per CPU, something which
could lead to requests being processed out of order on SMP systems.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Account for the configuration FIB_RULES=y && INET=n as FIB_RULES can
be selected by IPV6 or DECNET without INET.
Fixes: e7030878fc ("fib: Add fib rule match on tunnel id")
Fixes: 3093fbe7ff ("route: Per route IP tunnel metadata via lightweight tunnel")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Per RFC 6724, section 4, "Candidate Source Addresses":
It is RECOMMENDED that the candidate source addresses be the set
of unicast addresses assigned to the interface that will be used
to send to the destination (the "outgoing" interface).
Add a sysctl to enable this behaviour.
Signed-off-by: Erik Kline <ek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fix for:
net/mpls/mpls_iptunnel.c:73:19: sparse: incompatible types in comparison
expression (different address spaces)
remove incorrect rcu_dereference possibly left over from
earlier revisions of the code.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz says:
====================
bnx2x: update FW, rebrand and more
This patch series does several things - it updates the bnx2x FW into
7.12.30 which both contains some small fixes as well as opening the door
for several new features for the device - mainly vxlan/geneve offloads
and vlan filtering offload.
It then adds a new Multi-function mode [BD] which requires this FW in
order to operate.
In addition, this finally rebrands the driver from a 'broadcom' driver
into a 'qlogic' driver [although it would still reside under Broadcom's
tree in the kernel].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devices with up-to-date management FW will be able to store register dumps
on their persistent storage - in case management FW identifies a fatal
error it would gather and store such dumps, which could later be retrieved
using specific debug tools.
This patch adds the necessary part in the driver in order to make the
feature operational, as well as update users [under debug] during load
in case their device contains a dump of a previous crash.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support to a new multi-function mode, enabling driver to
initialize such devices and correctly interacting with management FW
for fully utilizing their features.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support to a new copper phy.
Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x still appears as a Broadcom driver even though the devices it
utilizes belong to Qlogic for more than a year.
This patch changes the various headers and the device strings to indicate
the correct ownership of the device.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This moves bnx2x into using 7.12.30 FW. Said firmware fixes the following:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- FCoE traffic might not recover after a failue while there's traffic
to another function.
In addition, this FW opens the door for the driver to implement several
new features; Specifically, this enhances the device's support for
encapsulated packets and will allow vxlan/geneve offloads to be added in
the future, as well as vlan filtering offload.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The name frequency does not adequately describe the data-point tracking the
number of greybus operations performed in a second by the loopback code.
Firmware team is moving towards calling this variable requests-per-second
or similar. This patch renames to keep the namespace consistent.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add some missing comments.
Add a TODO to look at doing iteration_count with KOBJ_CHANGE event instead
of having user-space poll the value reported in iteration_count to
determine when a test set is complete.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In order to extract a meaningful set of data out of loopback metrics it
makes sense to have the ability to specify how many times a loopback
operation should run and then to stop when the threshold is hit.
This will allow exactly the same loopback data pattern to be run again and
again, which is a fundamental prerequisite to instrumenting and
characterizing the loopback interface over time.
This patch introduces a simple sysfs controlled variable iteration_max.
iteration_max is the maximum number of iterations to run for a given set.
iteration_count is used internally to count from zero to iteration_max
if-and-only-if iteration_max is non zero. If iteration_max is zero then the
original behaviour of running the test command ad infinitum is maintained.
User-space should incrementally poll the iteration_count to determine when
the sequence is finished.
To accomplish this we move away from running as many commands as possible
in a one second window and instead run a fixed number of commands and log
the time it takes for those commands to complete in aggregate. Since we are
no longer resetting counters every one second, the tracker variables have
been moved from u32 to u64 to allow for reasonably long tests to gather
reasonably large amounts of data, without fear of over-flowing the
data-points.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Old comment needs updating to match 8a282c411ba0 ('greybus/loopback: make
loopback type input equivalent to protocol type')
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In the current code if the ts variable is not initialized then any data
already gathered in a previous loopback command is dropped instead of
logged. Also the timestamping of ts is done after the greybus operation.
This delayed time-stamping means that the delta between the before and
after timestamps is incorrect and if a delay in-between loopback operations
has been specified by the user, the ts timestamp will be very skewed
indeed.
- Move the ts initialization directly before the greybus operation.
- Remove the continue statement on first initialization of the ts variable.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch converts a dangling pr_err in the manifest parsing error path to
a dev_err in order to remain consistent with similar error messages
elsewhere.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
5ae6906e ('interface: Get manifest using Control protocol') in
gb_create_control_connection introduces the concept that the Control
Protocol is at cport_id 2 and bundle_id 0. Currently the manifest parsing
code does not enforce that concept and as a result it is possible for a
manifest to declare the Control Protocol at a different address.
Based on that change 6a6945c9684e ('greybus-spec/control: Formally define
Control Protocol reserved addresses') makes the above coding convention a
formal requirement of the greybus specification. This patch implements the
change introduced in the specification @ 6a6945c9684e.
This patch will reject a manifest if it doesn't match the critiera laid
down in the spec.
This patch makes three changes:
- Changes gb_manifest_parse_cports so that only GB_CONTROL_CPORT_ID may
have a protocol_id of GREYBUS_PROTOCOL_CONTROL, otherwise the manifest
will be rejected.
- Changes gb_manifest_parse_bundles so that only GB_CONTROL_BUNDLE_ID may
have a class of GREYBUS_CLASS_CONTROL, otherwise the manifest will be
rejected.
- gb_connection_exit() and gb_connection_destroy() are removed from
gb_manifest_parse_cports on error - since gb_manifest_parse_bundles()
already has a call into gb_bundle_destroy() which will again call
gb_connection_exit() and gb_connection_destroy() leading to an oops.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
SVC already provided version to the AP on version-request, no need to
ask for that again. Drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Some of the SVC request are already partially implement, whereas few
others are not. This patch implements and updates these requests.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
SVC connection is required before the AP knows its position on the endo
and type of endo. To enable message processing between the AP and SVC at
this time, we need a partially initialized connection which can handle
these messages.
Once the AP receives more information from the SVC, it can discard this
partially initialized connection and create a proper one, tied to a
bundle and interface.
Destroying the partially initialized connection is a bit tricky, as it
is required to send a response to svc-hello. That part will be properly
fixed separately.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We need to create bundle/connection for svc cport after the endo layout
and interface id is known to the AP. gb_create_control_connection() can
be reused for this, but it should be renamed to something more
appropriate, as its not about control-connection anymore.
Lets name it gb_create_bundle_connection().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We need a bundle-less connection for AP's SVC protocol, as that will be
used much before the endo layout and interface-id of the AP is known to
greybus core.
This updates gb_connection_create_range() to take few more arguments,
which were earlier fetched from the 'bundle' pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We need to allocate specific hd-cport-id for AP's control/svc protocols.
Support that by splitting functionality of gb_connection_create() into a
new routine, which takes range of hd_cport_id's to allocate from.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
SVC is also a special protocol (like control) and AP doesn't need to
send (dis)connected events for its cport.
Lets skip them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
For now, the plan is to use a single cport for both control and svc
protocol. Defining separate macros for control and svc protocol's
cport/bundle would make the code more flexible, in case we need two
separate cports in future.
Lets define cport/bundle for svc protocol as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Version response structure is also required by external entities like
gbsim and so its structure should be moved to greybus_protocols.h.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Class types aren't in sync with protocol types, lets keep them in sync
for now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We don't do what the comment says, drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Only four fixes this time so I'll describe them all.
We have an iomen resource leak fix in mv_udc_core. This bug
exists since v3.3.
Renesas got a fix for how they use dma_map_single() with IOMMU.
The new ulpi bus got an ordering fix, so drivers don't try to
probe ahead of the bus.
And finally, we have a fix for a really old regression with
dwc3, one which could only be exposed by a recent patch from
Subbaraya. Basically, we were startving the controller of
transfer resources.
Signed-off-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eKH4
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.2-rc4
Only four fixes this time so I'll describe them all.
We have an iomen resource leak fix in mv_udc_core. This bug
exists since v3.3.
Renesas got a fix for how they use dma_map_single() with IOMMU.
The new ulpi bus got an ordering fix, so drivers don't try to
probe ahead of the bus.
And finally, we have a fix for a really old regression with
dwc3, one which could only be exposed by a recent patch from
Subbaraya. Basically, we were startving the controller of
transfer resources.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Move alloc_msi_entry() from PCI MSI code into generic MSI code, so it
can be reused by other generic MSI drivers. Also introduce
free_msi_entry() for completeness.
Suggested-by: Stuart Yoder <stuart.yoder@freescale.com>.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/1436428847-8886-13-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reorganize struct msi_desc so it could be reused by other MSI
drivers. We have the following layout now:
struct msi_desc {
/* Shared device/bus independent data */
...
union {
/* PCI specific data */
struct {
...
};
};
};
We need to have anonymous union and a anonymous structure for the PCI
fields, otherwise we would have to change all instances using these
fields.
For non PCI devices we will enforce a proper namespace and a non
anonymous structure.
[ tglx: Added proper comments to the structure and massaged changelog ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/1436428847-8886-12-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Store 'struct device *' instead of 'struct pci_dev *' in struct msi_desc,
so struct msi_desc can be reused by non PCI based MSI drivers.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/1436428847-8886-11-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move msi_list from struct pci_dev into struct device, so we can
support non-PCI-device based generic MSI interrupts.
msi_list is now conditional under CONFIG_GENERIC_MSI_IRQ, which is
selected from CONFIG_PCI_MSI, so no functional change for PCI MSI
users.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/1436428847-8886-10-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use helper functions to access fields in struct msi_desc, so we could
easily refine struct msi_desc later.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Link: http://lkml.kernel.org/r/1436428847-8886-8-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use accessor for_each_pci_msi_entry() to access MSI device list, so we
could easily move msi_list from struct pci_dev into struct device
later.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Link: http://lkml.kernel.org/r/1436428847-8886-7-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use accessor for_each_pci_msi_entry() to access MSI device list, so we
could easily move msi_list from struct pci_dev into struct device
later.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1436428847-8886-6-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use accessor for_each_pci_msi_entry() to access MSI device list, so we could
easily move msi_list from struct pci_dev into struct device later.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Link: http://lkml.kernel.org/r/1436428847-8886-5-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use accessor for_each_pci_msi_entry() to access MSI device list, so we
could easily move msi_list from struct pci_dev into struct device
later.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/1436428847-8886-3-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add helper function msi_desc_to_pci_sysdata() to retrieve sysdata from
an MSI descriptor. To avoid pulling include/linux/pci.h into
include/linux/msi.h, msi_desc_to_pci_sysdata() is implemented as a normal
function instead of an inline function.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/1436428847-8886-2-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Update the last pr_warning callsite in drivers/irqchip.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <wanglong@laoqinren.net>
Cc: <peifeiyue@huawei.com>
Cc: <jason@lakedaemon.net>
Cc: <kgene@kernel.org>
Cc: <k.kozlowski@samsung.com>
Link: http://lkml.kernel.org/r/1437466261-147373-1-git-send-email-long.wanglong@huawei.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
As it turns out the current IRQ number will *always* be available from
SIR register which renders the reads of PENDING registers as plain
unnecessary overhead.
In order to catch any situation where SIR reads as zero, we're adding
a WARN() to turn it into a very verbose error and users actually
report it.
With this patch average running time of omap_intc_handle_irq() reduced
from about 28.5us to 19.8us as measured by the kernel function
profiler.
Tested with BeagleBoneBlack Rev A5C.
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Cc: Linux ARM Kernel Mailing List <linux-arm-kernel@lists.infradead.org>
Link: http://lkml.kernel.org/r/20150720204910.GH5394@saruman.tx.rr.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
The Coccinelle semantic patch that makes this change is as follows:
// <smpl>
@eth_zero_addr@
expression e;
@@
-memset(e,0x00,ETH_ALEN);
+eth_zero_addr(e);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>