In RC QP there is no need to resolve the outgoing interface
for each packet, as this does not change during QP life cycle.
Instead cache the interface on the socket and use that one.
This improves performance by 12% by sparing redundant
calls to rxe_find_route.
ib_send_bw -d rxe0 -x 1 -n 9000 -e -s $((1024 * 1024 )) -l 100
----------------------------------------------------------------------------------------
| | bytes | iterations | BW peak[MB/sec] | BW average[MB/sec] | MsgRate[Mpps] |
----------------------------------------------------------------------------------------
| before | 1048576 | 9000 | inf | 551.21 | 0.000551 |
| after | 1048576 | 9000 | inf | 615.54 | 0.000616 |
----------------------------------------------------------------------------------------
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
NFS attempts to wait for read and write completion before unlocking in
order to ensure that the data returned was protected by the lock. When
this waiting is interrupted by a signal, the unlock may be skipped, and
messages similar to the following are seen in the kernel ring buffer:
[20.167876] Leaked locks on dev=0x0:0x2b ino=0x8dd4c3:
[20.168286] POSIX: fl_owner=ffff880078b06940 fl_flags=0x1 fl_type=0x0 fl_pid=20183
[20.168727] POSIX: fl_owner=ffff880078b06680 fl_flags=0x1 fl_type=0x0 fl_pid=20185
For NFSv3, the missing unlock will cause the server to refuse conflicting
locks indefinitely. For NFSv4, the leftover lock will be removed by the
server after the lease timeout.
This patch fixes this issue by skipping the usual wait in
nfs_iocounter_wait if the FL_CLOSE flag is set when signaled. Instead, the
wait happens in the unlock RPC task on the NFS UOC rpc_waitqueue.
For NFSv3, use lockd's new nlmclnt_operations along with
nfs_async_iocounter_wait to defer NLM's unlock task until the lock
context's iocounter reaches zero.
For NFSv4, call nfs_async_iocounter_wait() directly from unlock's
current rpc_call_prepare.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS would enjoy the ability to modify the behavior of the NLM client's
unlock RPC task in order to delay the transmission of the unlock until IO
that was submitted under that lock has completed. This ability can ensure
that the NLM client will always complete the transmission of an unlock even
if the waiting caller has been interrupted with fatal signal.
For this purpose, a pointer to a struct nlmclnt_operations can be assigned
in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on
the nlm_host. The struct nlmclnt_operations defines three callback
operations that will be used in a following patch:
nlmclnt_alloc_call - used to call back after a successful allocation of
a struct nlm_rqst in nlmclnt_proc().
nlmclnt_unlock_prepare - used to call back during NLM unlock's
rpc_call_prepare. The NLM client defers calling rpc_call_start()
until this callback returns false.
nlmclnt_release_call - used to call back when the NLM client's struct
nlm_rqst is freed.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
By sleeping on a new NFS Unlock-On-Close waitqueue, rpc tasks may wait for
a lock context's iocounter to reach zero. The rpc waitqueue is only woken
when the open_context has the NFS_CONTEXT_UNLOCK flag set in order to
mitigate spurious wake-ups for any iocounter reaching zero.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Set FL_CLOSE in fl_flags as in locks_remove_posix() when clearing locks.
NFS will check for this flag to ensure an unlock is sent in a following
patch.
Fuse handles flock and posix locks differently for FL_CLOSE, and so
requires a fixup to retain the existing behavior for flock.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We only need to check lock exclusive/shared types against open mode when
flock() is used on NFS, so move it into the flock-specific path instead of
checking it for all locks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
flock64_to_posix_lock() is already doing this check
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Function rxe_rcv is used internally in RXE and don't need to be
exported. This patch removes such export declaration.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids RNR NAK timer and retransmit timer initialization and
cleanup for non RC QPs (such as UD QP, GSI QP).
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Expose new counters using the get_hw_stats callback.
We expose the following counters:
+---------------------+----------------------------------------+
| Name | Description |
|---------------------+----------------------------------------|
|sent_pkts | number of sent pkts |
|---------------------+----------------------------------------|
|rcvd_pkts | number of received packets |
|---------------------+----------------------------------------|
|out_of_sequence | number of errors due to packet |
| | transport sequence number |
|---------------------+----------------------------------------|
|duplicate_request | number of received duplicated packets. |
| | A request that previously executed is |
| | named duplicated. |
|---------------------+----------------------------------------|
|rcvd_rnr_err | number of received RNR by completer |
|---------------------+----------------------------------------|
|send_rnr_err | number of sent RNR by responder |
|---------------------+----------------------------------------|
|rcvd_seq_err | number of out of sequence packets |
| | received |
|---------------------+----------------------------------------|
|ack_deffered | number of deferred handling of ack |
| | packets. |
|---------------------+----------------------------------------|
|retry_exceeded_err | number of times retry exceeded |
|---------------------+----------------------------------------|
|completer_retry_err | number of times completer decided to |
| | retry |
|---------------------+----------------------------------------|
|send_err | number of failed send packet |
+---------------------+----------------------------------------+
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently most IOs which return the nvme error codes are retried on
the other path if those IOs returns EIO from NVMe driver. This
patch let Multipath distinguish nvme media error codes and some
generic or cmd-specific nvme error codes so that multipath will
not retry those kinds of IO, to save bandwidth.
Signed-off-by: Junxiong Guan <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If an IO timeout occurs, it's helpful to know if the controller did not
post a completion or the driver missed an interrupt. While we never expect
the latter, this patch will make it possible to tell the difference so
we don't have to guess.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
The FC-NVME spec revised syntax to avoid comma separators.
Sync with the change in the parser for traddr on port attachments.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
remoteport teardown never aborted the LS opertions. Add support.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Link LS's on the remoteport rather than the controller. LS's are
between nport's. Makes more sense, especially on async teardown where
the controller is torn down regardless of the LS (LS is more of a notifier
to the target of the teardown), to have them on the remoteport.
While revising ls send/done routines, issues were seen relative to
refcounting and cleanup, especially in async path. Reworked these code
paths.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
target transport:
----------------------
There are cases when there is a need to abort in-progress target
operations (writedata) so that controller termination or errors can
clean up. That can't happen currently as the abort is another target
op type, so it can't be used till the running one finishes (and it may
not). Solve by removing the abort op type and creating a separate
downcall from the transport to the lldd to request an io to be aborted.
The transport will abort ios on queue teardown or io errors. In general
the transport tries to call the lldd abort only when the io state is
idle. Meaning: ops that transmit data (readdata or rsp) will always
finish their transmit (or the lldd will see a state on the
link or initiator port that fails the transmit) and the done call for
the operation will occur. The transport will wait for the op done
upcall before calling the abort function, and as the io is idle, the
io can be cleaned up immediately after the abort call; Similarly, ios
that are not waiting for data or transmitting data must be in the nvmet
layer being processed. The transport will wait for the nvmet layer
completion before calling the abort function, and as the io is idle,
the io can be cleaned up immediately after the abort call; As for ops
that are waiting for data (writedata), they may be outstanding
indefinitely if the lldd doesn't see a condition where the initiatior
port or link is bad. In those cases, the transport will call the abort
function and wait for the lldd's op done upcall for the operation, where
it will then clean up the io.
Additionally, if a lldd receives an ABTS and matches it to an outstanding
request in the transport, A new new transport upcall was created to abort
the outstanding request in the transport. The transport expects any
outstanding op call (readdata or writedata) will completed by the lldd and
the operation upcall made. The transport doesn't act on the reported
abort (e.g. clean up the io) until an op done upcall occurs, a new op is
attempted, or the nvmet layer completes the io processing.
fcloop:
----------------------
Updated to support the new target apis.
On fcp io aborts from the initiator, the loopback context is updated to
NULL out the half that has completed. The initiator side is immediately
called after the abort request with an io completion (abort status).
On fcp io aborts from the target, the io is stopped and the initiator side
sees it as an aborted io. Target side ops, perhaps in progress while the
initiator side is done, continue but noop the data movement as there's no
structure on the initiator side to reference.
patch also contains:
----------------------
Revised lpfc to support the new abort api
commonized rsp buffer syncing and nulling of private data based on
calling paths.
errors in op done calls don't take action on the fod. They're bad
operations which implies the fod may be bad.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Current design has the fcloop job struct, used for both initiator and
target processing, allocated as part of the initiator request structure.
On aborts, the initiator side (based on the request) may terminate, yet
the target side wants to continue processing. the target side can't do
that if the initiator side goes away.
Revise fcloop to allocate an independent target side structure when it
starts an io from the initiator.
Added a lock to the request struct as well to synchronize pointer updates
on abort calls.
Modified target downcalls to recognize conditions where initiator has
aborted the io (thus nulled the pointer between job structs), thus
avoid referencing sgl lists which are gone and no longer making upcalls
to the initiator.
In conditions where the targetport is no longer connected, have the
initiator return an access failure rather than simulating a command
completion.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
With the advent of the opdone calls changing context, the lldd can no
longer assume that once the op->done call returns for RSP operations
that the request struct is no longer being accessed.
As such, revise the lldd api for a req_release callback that the
transport will call when the job is complete. This will also be used
with abort cases.
Fixed text in api header for change in io complete semantics.
Revised lpfc to support the new req_release api.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Two new feature flags were added to control whether upcalls to the
transport result in context switches or stay in the calling context.
NVMET_FCTGTFEAT_CMD_IN_ISR:
By default, if the flag is not set, the transport assumes the
lldd is in a non-isr context and in the cpu context it should be
for the io queue. As such, the cmd handler is called directly in the
calling context.
If the flag is set, indicating the upcall is an isr context, the
transport mandates a transition to a workqueue. The workqueue assigned
to the queue is used for the context.
NVMET_FCTGTFEAT_OPDONE_IN_ISR
By default, if the flag is not set, the transport assumes the
lldd is in a non-isr context and in the cpu context it should be
for the io queue. As such, the fcp operation done callback is called
directly in the calling context.
If the flag is set, indicating the upcall is an isr context, the
transport mandates a transition to a workqueue. The workqueue assigned
to the queue is used for the context.
Updated lpfc for flags
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This is safer as it doesn't rely on the data being stored in
a single page in an sgl.
It also aids our effort to start phasing out users of sg_page. See [1].
For this we kmalloc some memory, copy to it and free at the end. Note:
we can't allocate this memory on the stack as the kbuild test robot
reports some frame size overflows on i386.
[1] https://lwn.net/Articles/720053/
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
This change provides a mechanism to reduce the number of MMIO doorbell
writes for the NVMe driver. When running in a virtualized environment
like QEMU, the cost of an MMIO is quite hefy here. The main idea for
the patch is provide the device two memory location locations:
1) to store the doorbell values so they can be lookup without the doorbell
MMIO write
2) to store an event index.
I believe the doorbell value is obvious, the event index not so much.
Similar to the virtio specification, the virtual device can tell the
driver (guest OS) not to write MMIO unless you are writing past this
value.
FYI: doorbell values are written by the nvme driver (guest OS) and the
event index is written by the virtual device (host OS).
The patch implements a new admin command that will communicate where
these two memory locations reside. If the command fails, the nvme
driver will work as before without any optimizations.
Contributions:
Eric Northup <digitaleric@google.com>
Frank Swiderski <fes@google.com>
Ted Tso <tytso@mit.edu>
Keith Busch <keith.busch@intel.com>
Just to give an idea on the performance boost with the vendor
extension: Running fio [1], a stock NVMe driver I get about 200K read
IOPs with my vendor patch I get about 1000K read IOPs. This was
running with a null device i.e. the backing device simply returned
success on every read IO request.
[1] Running on a 4 core machine:
fio --time_based --name=benchmark --runtime=30
--filename=/dev/nvme0n1 --nrfiles=1 --ioengine=libaio --iodepth=32
--direct=1 --invalidate=1 --verify=0 --verify_fatal=0 --numjobs=4
--rw=randread --blocksize=4k --randrepeat=false
Signed-off-by: Rob Nelson <rlnelson@google.com>
[mlin: port for upstream]
Signed-off-by: Ming Lin <mlin@kernel.org>
[koike: updated for upstream]
Signed-off-by: Helen Koike <helen.koike@collabora.co.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
The QPRIO field is only valid if weighted round robin arbitration is used,
and this driver doesn't enable that controller configuration option.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
tag_lan9303.c does check for a NULL dst but that's already checked by
dsa_switch_rcv() one layer above.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move scsi_remove_host call into sas_remove_host and remove it from SAS
HBA drivers, so we don't mess up the ordering. This solves an issue with
double deleting sysfs entries that was introduced by the change of sysfs
behaviour from commit bcdde7e221 ("sysfs: make __sysfs_remove_dir()
recursive").
[mkp: addressed checkpatch complaints]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Jinpu Wang <jinpu.wang@profitbricks.com>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trivial fix to spelling mistake, adatper_reset_req should be
adapter_reset_req. Also break up very long seq_printf statement into
multiple lines.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. This also initializes the
array members using the enum used to look up __port_action entries.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
No point in providing and exporting this helper. There's just
one (real) user of it, just use rq_data_dir().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a call to schedule() acts as a Tasks RCU quiescent state
only if a context switch actually takes place. However, just the
call to schedule() guarantees that the calling task has moved off of
whatever tracing trampoline that it might have been one previously.
This commit therefore plumbs schedule()'s "preempt" parameter into
rcu_note_context_switch(), which then records the Tasks RCU quiescent
state, but only if this call to schedule() was -not- due to a preemption.
To avoid adding overhead to the common-case context-switch path,
this commit hides the rcu_note_context_switch() check under an existing
non-common-case check.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although Tree SRCU does reduce delays when there is at least one
synchronize_srcu_expedited() invocation pending, srcu_schedule_cbs_snp()
still waits for SRCU_INTERVAL before invoking callbacks. Since
synchronize_srcu_expedited() now posts a callback and waits for
that callback to do a wakeup, this destroys the expedited nature of
synchronize_srcu_expedited(). This destruction became apparent to
Marc Zyngier in the guise of a guest-OS bootup slowdown from five
seconds to no fewer than forty seconds.
This commit therefore invokes callbacks immediately at the end of the
grace period when there is at least one synchronize_srcu_expedited()
invocation pending. This brought Marc's guest-OS bootup times back
into the realm of reason.
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Peter Zijlstra proposed using SRCU to reduce mmap_sem contention [1,2],
however, there are workloads that could result in a high volume of
concurrent invocations of call_srcu(), which with current SRCU would
result in excessive lock contention on the srcu_struct structure's
->queue_lock, which protects SRCU's callback lists. This commit therefore
moves SRCU to per-CPU callback lists, thus greatly reducing contention.
Because a given SRCU instance no longer has a single centralized callback
list, starting grace periods and invoking callbacks are both more complex
than in the single-list Classic SRCU implementation. Starting grace
periods and handling callbacks are now handled using an srcu_node tree
that is in some ways similar to the rcu_node trees used by RCU-bh,
RCU-preempt, and RCU-sched (for example, the srcu_node tree shape is
controlled by exactly the same Kconfig options and boot parameters that
control the shape of the rcu_node tree).
In addition, the old per-CPU srcu_array structure is now named srcu_data
and contains an rcu_segcblist structure named ->srcu_cblist for its
callbacks (and a spinlock to protect this). The srcu_struct gets
an srcu_gp_seq that is used to associate callback segments with the
corresponding completion-time grace-period number. These completion-time
grace-period numbers are propagated up the srcu_node tree so that the
grace-period workqueue handler can determine whether additional grace
periods are needed on the one hand and where to look for callbacks that
are ready to be invoked.
The srcu_barrier() function must now wait on all instances of the per-CPU
->srcu_cblist. Because each ->srcu_cblist is protected by ->lock,
srcu_barrier() can remotely add the needed callbacks. In theory,
it could also remotely start grace periods, but in practice doing so
is complex and racy. And interestingly enough, it is never necessary
for srcu_barrier() to start a grace period because srcu_barrier() only
enqueues a callback when a callback is already present--and it turns out
that a grace period has to have already been started for this pre-existing
callback. Furthermore, it is only the callback that srcu_barrier()
needs to wait on, not any particular grace period. Therefore, a new
rcu_segcblist_entrain() function enqueues the srcu_barrier() function's
callback into the same segment occupied by the last pre-existing callback
in the list. The special case where all the pre-existing callbacks are
on a different list (because they are in the process of being invoked)
is handled by enqueuing srcu_barrier()'s callback into the RCU_DONE_TAIL
segment, relying on the done-callbacks check that takes place after all
callbacks are inovked.
Note that the readers use the same algorithm as before. Note that there
is a separate srcu_idx that tells the readers what counter to increment.
This unfortunately cannot be combined with srcu_gp_seq because they
need to be incremented at different times.
This commit introduces some ugly #ifdefs in rcutorture. These will go
away when I feel good enough about Tree SRCU to ditch Classic SRCU.
Some crude performance comparisons, courtesy of a quickly hacked rcuperf
asynchronous-grace-period capability:
Callback Queuing Overhead
-------------------------
# CPUS Classic SRCU Tree SRCU
------ ------------ ---------
2 0.349 us 0.342 us
16 31.66 us 0.4 us
41 --------- 0.417 us
The times are the 90th percentiles, a statistic that was chosen to reject
the overheads of the occasional srcu_barrier() call needed to avoid OOMing
the test machine. The rcuperf test hangs when running Classic SRCU at 41
CPUs, hence the line of dashes. Despite the hacks to both the rcuperf code
and that statistics, this is a convincing demonstration of Tree SRCU's
performance and scalability advantages.
[1] https://lwn.net/Articles/309030/
[2] https://patchwork.kernel.org/patch/5108281/
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix initialization if synchronize_srcu_expedited() called first. ]
Add powerpc support for mmap_rnd_bits and mmap_rnd_compat_bits, which are two
sysctls that allow a user to configure the number of bits of randomness used for
ASLR.
Because of the way the Kconfig for ARCH_MMAP_RND_BITS is defined, we have to
construct at least the MIN value in Kconfig, vs in a header which would be more
natural. Given that we just go ahead and do it all in Kconfig.
At least according to the code (the documentation makes no mention of it), the
value is defined as the number of bits of randomisation *of the page*, not the
address. This makes some sense, with larger page sizes more of the low bits are
forced to zero, which would reduce the randomisation if we didn't take the
PAGE_SIZE into account. However it does mean the min/max values have to change
depending on the PAGE_SIZE in order to actually limit the amount of address
space consumed by the randomisation.
The result of that is that we have to define the default values based on both
32-bit vs 64-bit, but also the configured PAGE_SIZE. Furthermore now that we
have 128TB address space support on Book3S, we also have to take that into
account.
Finally we can wire up the value in arch_mmap_rnd().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Parallelizing SRCU callback handling will increase the size of
srcu_struct, which will move the kvm structure's kvm_arch field out
of reach of powerpc's current assembly code, which will result in the
following sort of build error:
arch/powerpc/kvm/book3s_hv_rmhandlers.S:617: Error: operand out of range (0x000000000000b328 is not between 0xffffffffffff8000 and 0x0000000000007fff)
This commit moves the srcu_struct fields in the kvm structure to follow
the kvm_arch field, which will allow powerpc's assembly code to continue
to be able to reach the kvm_arch field.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <michaele@au1.ibm.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[ paulmck: Moved this commit to precede SRCU callback parallelization,
and reworded the commit log into future tense, all in the name of
bisectability. ]
Ensure that we disable interrupts first when shutting down
the driver.
Cc: <stable@vger.kernel.org> # 4.9.x+
Signed-off-by: Gary R Hook <ghook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Each CCP queue can product interrupts for 4 conditions:
operation complete, queue empty, error, and queue stopped.
This driver only works with completion and error events.
Cc: <stable@vger.kernel.org> # 4.9.x+
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for hardware random generator on MT7623 SoC
and should also work on other similar Mediatek SoCs. Currently,
the driver is already tested successfully with rng-tools.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the devicetree bindings for Mediatek random number
generator which could be found on MT7623 SoC or other similar
Mediatek SoCs.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In crct10dif_vpmsum() we call enable_kernel_altivec() without first
disabling preemption, which is not allowed.
It used to be sufficient just to call pagefault_disable(), because that
also disabled preemption. But the two were decoupled in commit 8222dbe21e
("sched/preempt, mm/fault: Decouple preemption from the page fault
logic") in mid 2015.
The crct10dif-vpmsum code inherited this bug from the crc32c-vpmsum code
on which it was modelled.
So add the missing preempt_disable/enable(). We should also call
disable_kernel_fp(), although it does nothing by default, there is a
debug switch to make it active and all enables should be paired with
disables.
Fixes: b01df1c16c ("crypto: powerpc - Add CRC-T10DIF acceleration")
Acked-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Compression implementations might return valid outputs that
do not match what specified in the test vectors.
For this reason, the testmgr might report that a compression
implementation failed the test even if the data produced
by the compressor is correct.
This implements a decompress-and-verify test for acomp
compression tests rather than a known answer test.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto_register_acomps and crypto_unregister_acomps to allow
the registration of multiple implementations with one call.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
* Replace the specification of a data structure by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Up to now, 'crypto_alloc_shash()' may return a valid pointer, an error
pointer or NULL (in case of invalid parameter)
Update it to always return an error pointer in case of error. It now
returns ERR_PTR(-EINVAL) instead of NULL in case of invalid parameter.
This simplifies error handling.
Also fix a crash in 'chcr_authenc_setkey()' if 'chcr_alloc_shash()'
returns an error pointer and the "goto out" path is taken.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Per Dan's static checker warning, the code that returns NULL was removed
in 2010, so this patch updates the comments and fixes the code
assumptions.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace existing hw_ranndom/exynos-rng driver with a new, reworked one.
This is a driver for pseudo random number generator block which on
Exynos4 chipsets must be seeded with some value. On newer Exynos5420
chipsets it might seed itself from true random number generator block
but this is not implemented yet.
New driver is a complete rework to use the crypto ALGAPI instead of
hw_random API. Rationale for the change:
1. hw_random interface is for true RNG devices.
2. The old driver was seeding itself with jiffies which is not a
reliable source for randomness.
3. Device generates five random 32-bit numbers in each pass but old
driver was returning only one 32-bit number thus its performance was
reduced.
Compatibility with DeviceTree bindings is preserved.
New driver does not use runtime power management but manually enables
and disables the clock when needed. This is preferred approach because
using runtime PM just to toggle clock is huge overhead.
Another difference is reseeding itself with generated random data
periodically and during resuming from system suspend (previously driver
was re-seeding itself again with jiffies).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Few parts of kernel define their own macro for aligning down so provide
a common define for this, with the same usage and assumptions as existing
ALIGN.
Convert also three existing implementations to this one.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix to return error code -ENOMEM from the kmem_cache_create() error
handling case instead of 0(err is 0 here), as done elsewhere in this
function.
Fixes: 67c2315def ("crypto: caam - add Queue Interface (QI) backend support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fallback to sw when
I AAD length greater than 511
II Zero length payload
II No of sg entries exceeds Request size.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
