The check for I40E_CONFIG_BUSY state bit in the i40e_set_link_ksettings
function is fishy. First we can notice a few things about the check here.
First a similar check was introduced by commit
'c7d05ca89f ("i40e: driver ethtool core")'
Later a commit introducing the link settings was added by commit
'bf9c71417f ("i40e: Implement set_settings for ethtool")'
However, this second check was against vsi->state instead of pf->state,
and also failed to set the bit, it only checks. That indicates the locking
was not quite correct. The only other place that the state bit
in vsi->state gets used is to protect the filter list.
Since this code does not care about the mac filter list, and seems
clear the original code should have set the pf->state bit. Fix these
issues by using pf->state correctly, and by actually setting the bit
so that we properly lock as expected.
Since these checks occur while holding the rtnl_lock(), lets also add a
timeout so that we don't potentially softlock the system.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
and then two Allwinner clk driver build fixes and two CPU clk driver fixes
where we see random CPUFreq crashes because the CPU's PLL locks up sometimes
when we change the rate.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=EujZ
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd"
- one stm32f4 fix for a change that introduced the PLL_I2S and PLL_SAI
boards
- two Allwinner clk driver build fixes
- two Allwinner CPU clk driver fixes where we see random CPUFreq
crashes because the CPU's PLL locks up sometimes when we change the
rate
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change
clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks
clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver
clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER
clk: stm32f4: fix: exclude values 0 and 1 for PLLQ
A future patch will need to be able to handle controlling queues without
waiting until all VSIs are handled. Factor out the direct queue
modification so that we can easily re-use this code. The result is also
a bit easier to read since we don't embed multiple single-letter loop
counters.
Change-ID: Id923cbfa43127b1c24d8ed4f809b1012c736d9ac
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pull CIFS fix from Steve French:
"One more cifs fix for stable"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not send echoes before Negotiate is complete
We made some effort to reduce the RTNL lock scope when resetting and
rebuilding the PF. Unfortunately we still held the RTNL lock during the
VF reset operation, which meant that multiple PFs could not reset in
parallel due to the global lock. For now, further reduce the scope by
not holding the RTNL lock while resetting VFs. This allows multiple PFs
to reset in a timely manner.
Change-ID: I2fbf823a0063f24dff67676cad09f0bbf83ee4ce
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds tracepoints to the i40e and i40evf drivers to which
BPF programs can be attached for feature testing and verification.
It's expected that an attached BPF program will identify and count or
log some interesting subset of traffic. The bcc-tools package is
helpful there for containing all the BPF arcana in a handy Python
wrapper. Though you can make these tracepoints log trace messages, the
messages themselves probably won't be very useful (other to verify the
tracepoint is being called while you're debugging your BPF program).
The idea here is that tracepoints have such low performance cost when
disabled that we can leave these in the upstream drivers. This may
eventually enable the instrumentation of unmodified customer systems
should the need arise to verify a NIC feature is working as expected.
In general this enables one set of feature verification tools to be
used on these drivers whether they're built with the kernel or
separately.
Users are advised against using these tracepoints for anything other
than a diagnostic tool. They have a performance impact when enabled,
and their exact placement and form may change as we see how well they
work in practice for the purposes above.
Change-ID: Id6014a7322c0e6d08068114dd20bd156f2f6435e
Signed-off-by: Scott Peterson <scott.d.peterson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since ioprio_best() translates IOPRIO_CLASS_NONE into IOPRIO_CLASS_BE
and since lower numerical priority values represent a higher priority
a simple numerical comparison is sufficient.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Tested-by: Adam Manzanares <adam.manzanares@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since only a single caller remains, inline blk_rq_set_prio(). Initialize
req->ioprio even if no I/O priority has been set in the bio nor in the
I/O context.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Adam Manzanares <adam.manzanares@wdc.com>
Tested-by: Adam Manzanares <adam.manzanares@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch changes the behavior of the lightnvm driver as follows:
* REQ_FAILFAST_MASK is set for read-ahead requests.
* If no I/O priority has been set in the bio, the I/O priority is
copied from the I/O context.
* The rq_disk member is initialized if bio->bi_bdev != NULL.
* The bio sector offset is copied into req->__sector instead of
retaining the value -1 set by blk_mq_alloc_request().
* req->errors is initialized to zero.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <m@bjorling.me>
Cc: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch changes the behavior of the null_blk driver for the
LightNVM mode as follows:
* REQ_FAILFAST_MASK is set for read-ahead requests.
* If no I/O priority has been set in the bio, the I/O priority is
copied from the I/O context.
* The rq_disk member is initialized if bio->bi_bdev != NULL.
* req->errors is initialized to zero.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <m@bjorling.me>
Cc: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Export this function such that it becomes available to block
drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <m@bjorling.me>
Cc: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Dump some internal state about VFs through debugfs. This provides
information not available with 'ip link show'. To use, write "dump vf
<id>" to the command file, or just "dump vf" to dump information on all
of the VFs.
Change-ID: Ibe32b7f4ae55d4358c0b903217475f708ada1ecd
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch fixes an issue I introduced when I converted the code over to
using the length field to determine if a descriptor was done or not. It
turns out that we are also processing programming descriptors in the Rx
path and need to have these processed even though the length field will be
0 on these packets. What will happen with a programming descriptor is that
we will receive a descriptor that has the SPH bit set, and the header
length and packet length fields cleared.
To account for this we should be checking for the bit for split header
being set even though we aren't actually using header split. This bit is
set in the length field to indicate if a programming descriptor response is
contained in the descriptor. Since we don't support header split we don't
need to perform the extra checks of using a fixed value for the entire
length field.
In addition I am moving the function for checking if a filter is a
programming status filter into the i40e_txrx.c file since there is no
longer support for FCoE it doesn't make sense to keep this file in i40e.h.
Change-ID: I12c359c3dc70adb9d6b92b27324bb2c7f04c1a06
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Rx checksum offload for tunneled packets was never being negotiated or
requested by VF. This capability was assumed by default and enabled in
current hardware for VF. Going forward, this feature needs to be disabled
or advanced ptypes should be negotiated with PF in the future.
Change-ID: I9e54cfa8a90e03ab6956db4412f1e337ccd2c2e0
Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Instead of using a private copy of struct net_device_stats in
struct i40evf_adapter, use stats from struct net_device. Also remove the
now unnecessary .ndo_get_stats function.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Included in the current storvsc driver for Hyper-V is the ability to
access luns on an FC fabric via a virtualized fiber channel adapter
exposed by the Hyper-V host. The driver also attaches to the FC
transport to allow host and port names to be published under
/sys/class/fc_host/hostX. Current customer tools running on the VM
require that these names be available in the well known standard
location under fc_host/hostX.
This patch stubs in an rport per fc_host and sets its rport role as
FC_PORT_ROLE_FCP_DUMMY_INITIATOR to indicate to the fc_transport that it
is a pseudo rport in order to scan the scsi stack via echo "- - -" >
/sys/class/scsi_host/hostX/scan.
Signed-off-by: Cathy Avery <cavery@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch allows scsi drivers that expose virturalized fibre channel
devices but that do not expose rports to successfully rescan the scsi
bus via echo "- - -" > /sys/class/scsi_host/hostX/scan. Drivers can
create a pseudo rport and indicate FC_PORT_ROLE_FCP_DUMMY_INITIATOR as
the rport's role in fc_rport_identifiers. This insures that a valid
scsi_target_id is assigned to the newly created rport and it can meet
the requirements of fc_user_scan_tgt calling scsi_scan_target.
Signed-off-by: Cathy Avery <cavery@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Passed through SCSI targets may have transfer limits which come from the
host SCSI controller or something on the host side other than the target
itself.
To make this work properly, the hypervisor can adjust the target's VPD
information to advertise these limits. But for that to work, the guest
has to look at the VPD pages, which we won't do by default if it is an
SPC-2 device, even if it does actually support it.
This adds a workaround to address this, forcing devices attached to a
virtio-scsi controller to always check the VPD pages. This is modelled
on a similar workaround for the storvsc (Hyper-V) SCSI controller,
although that exists for slightly different reasons.
A specific case which causes this is a volume from IBM's IPR RAID
controller (which presents as an SPC-2 device, although it does support
VPD) passed through with qemu's 'scsi-block' device.
[mkp: fixed typo]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Andrey reported a use-after-free in __ns_get_path():
spin_lock include/linux/spinlock.h:299 [inline]
lockref_get_not_dead+0x19/0x80 lib/lockref.c:179
__ns_get_path+0x197/0x860 fs/nsfs.c:66
open_related_ns+0xda/0x200 fs/nsfs.c:143
sock_ioctl+0x39d/0x440 net/socket.c:1001
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1bf/0x1780 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
We are under rcu read lock protection at that point:
rcu_read_lock();
d = atomic_long_read(&ns->stashed);
if (!d)
goto slow;
dentry = (struct dentry *)d;
if (!lockref_get_not_dead(&dentry->d_lockref))
goto slow;
rcu_read_unlock();
but don't use a proper RCU API on the free path, therefore a parallel
__d_free() could free it at the same time. We need to mark the stashed
dentry with DCACHE_RCUACCESS so that __d_free() will be called after all
readers leave RCU.
Fixes: e149ed2b80 ("take the targets of /proc/*/ns/* symlinks to separate fs")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert has reported a freeze during PM resume and some additional
debugging has shown that the device_resume worker cannot make a forward
progress because it waits for an event which is stuck waiting in
drain_all_pages:
INFO: task kworker/u4:0:5 blocked for more than 120 seconds.
Not tainted 4.11.0-rc7-koelsch-00029-g005882e53d62f25d-dirty #3476
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u4:0 D 0 5 2 0x00000000
Workqueue: events_unbound async_run_entry_fn
__schedule
schedule
schedule_timeout
wait_for_common
dpm_wait_for_superior
device_resume
async_resume
async_run_entry_fn
process_one_work
worker_thread
kthread
[...]
bash D 0 1703 1694 0x00000000
__schedule
schedule
schedule_timeout
wait_for_common
flush_work
drain_all_pages
start_isolate_page_range
alloc_contig_range
cma_alloc
__alloc_from_contiguous
cma_allocator_alloc
__dma_alloc
arm_dma_alloc
sh_eth_ring_init
sh_eth_open
sh_eth_resume
dpm_run_callback
device_resume
dpm_resume
dpm_resume_end
suspend_devices_and_enter
pm_suspend
state_store
kernfs_fop_write
__vfs_write
vfs_write
SyS_write
[...]
Showing busy workqueues and worker pools:
[...]
workqueue mm_percpu_wq: flags=0xc
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=0/0
delayed: drain_local_pages_wq, vmstat_update
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=0/0
delayed: drain_local_pages_wq BAR(1703), vmstat_update
Tetsuo has properly noted that mm_percpu_wq is created as WQ_FREEZABLE
so it is frozen this early during resume so we are effectively
deadlocked. Fix this by dropping WQ_FREEZABLE when creating
mm_percpu_wq. We really want to have it operational all the time.
Fixes: ce612879dd ("mm: move pcp and lru-pcp draining into single wq")
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OF core code provides helpers for counting strings and reading them so
use them instead of doing this manually. This simplifies the code a bit.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Setup a dax_dev to have the same lifetime as the dcssblk block device
and add a ->direct_access() method that is equivalent to
dcssblk_direct_access(). Once fs/dax.c has been converted to use
dax_operations the old dcssblk_direct_access() will be removed.
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Setup a dax_inode to have the same lifetime as the brd block device and
add a ->direct_access() method that is equivalent to
brd_direct_access(). Once fs/dax.c has been converted to use
dax_operations the old brd_direct_access() will be removed.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Setup a dax_device to have the same lifetime as the axon_ram block
device and add a ->direct_access() method that is equivalent to
axon_ram_direct_access(). Once fs/dax.c has been converted to use
dax_operations the old axon_ram_direct_access() will be removed.
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Setup a dax_device to have the same lifetime as the pmem block device
and add a ->direct_access() method that is equivalent to
pmem_direct_access(). Once fs/dax.c has been converted to use
dax_operations the old pmem_direct_access() will be removed.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Track a set of dax_operations per dax_device that can be set at
alloc_dax() time. These operations will be used to stop the abuse of
block_device_operations for communicating dax capabilities to
filesystems. It will also be used to replace the "pmem api" and move
pmem-specific cache maintenance, and other dax-driver-specific
filesystem-dax operations, to dax device methods. In particular this
allows us to stop abusing __copy_user_nocache(), via memcpy_to_pmem(),
with a driver specific replacement.
This is a standalone introduction of the operations. Follow on patches
convert each dax-driver and teach fs/dax.c to use ->direct_access() from
dax_operations instead of block_device_operations.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For the current block_device based filesystem-dax path, we need a way
for it to lookup the dax_device associated with a block_device. Add a
'host' property of a dax_device that can be used for this purpose. It is
a free form string, but for a dax_device associated with a block device
it is the bdev name.
This is a stop-gap until filesystems are able to mount on a dax-inode
directly.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fix a single bug in the PWM backlight driver and make it play nice
with a wider range of GPIO devices. This bug is a regression and was
independently discovered by Geert Uytterhoevan and Paul Kocialkowski
(and is tested by both).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=XVXE
-----END PGP SIGNATURE-----
Merge tag 'backlight-for-v4.11' of git://git.linaro.org/people/daniel.thompson/linux
Pull backlight fix from Daniel Thompson:
"Normally pull requests for backlight come from Lee Jones (and will
continue to do so) but the bug fixed here is annoying for few people
so I'm providing a little holiday cover.
Fix a single bug in the PWM backlight driver and make it play nice
with a wider range of GPIO devices. This bug is a regression and was
independently discovered by Geert Uytterhoevan and Paul Kocialkowski
(and is tested by both)"
* tag 'backlight-for-v4.11' of git://git.linaro.org/people/daniel.thompson/linux:
backlight: pwm_bl: Fix GPIO out for unimplemented .get_direction()
Document the fact that the autosuspend delay and enable helpers may
change the power.usage_count and resume or suspend a device depending on
the values of power.autosuspend_delay and power.use_autosuspend.
Note that this means that a driver must disable autosuspend before
disabling runtime pm on probe errors and on driver unbind if the device
is to be suspended upon return (as a negative delay may otherwise keep
the device resumed).
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update the autosuspend documentation which claimed that the autosuspend
delay is not taken into account when using the non-autosuspend helper
functions, something which is no longer true since commit d66e6db28d
("PM / Runtime: Respect autosuspend when idle triggers suspend").
This specifically means that drivers must now disable autosuspend before
disabling runtime pm in probe error paths and remove callbacks if
pm_runtime_put_sync was being used to suspend the device before
returning. (If an idle callback can prevent suspend,
pm_runtime_put_sync_suspend must be used instead of pm_runtime_put_sync
as before.)
Also remove the claim that the autosuspend helpers behave "just like
the non-autosuspend counterparts", something which have never really
been true as some of the latter use idle notifications.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
BootGraph and SleepGraph man pages
- includes full descriptions of tool arguments and commands
- includes examples of common use cases
Makefile
- no build required, used only for install
- installs man pages and tools as libraries with links
- includes an uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
First release into the kernel tools source
- pulls in analyze_suspend.py as as library, same html formatting
- supplants scripts/bootgraph.pl, outputs HTML instead of SVG
- enables automatic reboot and collection for easy timeline capture
- enables ftrace callgraph collection from early boot
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Moved from scripts into tools, and updated from 4.5 to 4.6
- Changed the tool title to SleepGraph
- Reformatted the code so analyze_suspend can be used as a library
- Reorganized all html/js/css handling code to be used by other tools
- upgraded the -summary feature to work faster with better readability
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a new cpufreq driver for Tegra186 (and likely later).
The CPUs are organized into two clusters, Denver and A57,
with two and four cores respectively. CPU frequency can be
adjusted by writing the desired rate divisor and a voltage
hint to a special per-core register.
The frequency of each core can be set individually; however,
this is just a hint as all CPUs in a cluster will run at
the maximum rate of non-idle CPUs in the cluster.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the previous error handling code, it is likely that
'goto out_free_opp' is expected here in order to avoid a memory leak in
error handling path.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the cpufreq driver tries to modify voltage/freq during suspend/resume
it might need to control an external PMIC via I2C or SPI but those
devices might be already suspended. This issue is likely to happen
whenever the LDOs have their vin-supply set.
To avoid this scenario we just increase cpufreq to the maximum before
suspend.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If there are any errors in getting the cpu0 regulators, the driver returns
-ENOENT. In case the regulators are not yet available, the devm_regulator_get
calls will return -EPROBE_DEFER, so that the driver can be probed later.
If we return -ENOENT, the driver will fail its initialization and will
not try to probe again (when the regulators become available).
Return the actual error received from regulator_get in probe. Print a
differentiated message in case we need to probe the device later and
in case we actually failed. Also add a message to inform when the
driver has been successfully registered.
Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When in the snooze_loop() we want to take up the least amount of
resources. On my version of gcc (6.3), we end up with an extra
branch because it predicts snooze_timeout_en to be false, whereas it
is almost always true.
Use likely() to avoid the branch and be a little nicer to the
other non idle threads on the core.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The powerpc64 kernel exception handlers have preserved thread priorities
for a long time now, so there is no need to continually set it.
Just set it once on entry and once exit.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The core of snooze_loop() continually bounces between low and very
low thread priority. Changing thread priorities is an expensive
operation that can negatively impact other threads on a core.
All CPUs that can run PowerNV support very low priority, so we can
avoid the change completely.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'core' in cps_cpuidle_init has never been used and is unnecessary, so
remove the dead code.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_bus_attach() does not check the visited flag for devices that
have been enumerated already and some of them may be enumerated
for multiple times as a result, because some callers of
acpi_bus_scan() don't check the visited flag either.
For this reason, modify acpi_bus_attach() to check the visited flag
and avoid enumerating devices that have already been enumerated.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Joey Lee <jlee@suse.com>
The current code in acpi_bus_attach() is inconsistent with respect
to device objects with ACPI drivers bound to them, as it allows
ACPI drivers to bind to device objects with existing "physical"
device companions, but it doesn't allow "physical" device objects
to be created for ACPI device objects with ACPI drivers bound to
them. Thus, in some cases, the outcome depends on the ordering
of events which is confusing at best.
For this reason, modify acpi_bus_attach() to call
acpi_default_enumeration() for device objects with the
pnp.type.platform_id flag set regardless of whether or not
any ACPI drivers are bound to them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Joey Lee <jlee@suse.com>
All the helper functions (i.e. hp_wmi_dock_state, hp_wmi_tablet_state,
...) using hp_wmi_perform_query to perform an HP WMI query shadow the
returned value in case of error.
We return -EINVAL only when the HP WMI query returns a positive value
(the specific error code) to not mix this up with the actual value
returned by the helper function.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
On some devices with an axp288 pmic setting vbus path based on the
id-pin is handled by an ACPI _AIE interrupt on the gpio and the
INT3496 device is disabled.
Instead of returning -EPROBE_DEFER on these devices waiting for the
never to show up INT3496 device, check for its presence and only
request and monitor the matching extcon if the device is there,
otherwise let the firmware handle the vbus path control.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some systems we have a native PMIC driver which provides Mains
monitoring, while the ACPI ac driver is broken on these systems
due to bad DSTDs or because we do not support the proprietary and
undocumented ACPI opregions these ACPI battery devices rely on
(e.g. BMOP opregion).
This leads for example to a ADP1 power_supply which reports
itself as always online even if no mains are connected.
This commit adds a blacklist with PMIC ACPI HIDs for which we've a
native charger or extcon driver and makes the ACPI ac driver not
register itself when a PMIC on this list is present.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some systems we have a native PMIC driver which provides battery
monitoring, while the ACPI battery driver is broken on these systems
due to bad DSDTs or because we do not support the proprietary and
undocumented ACPI opregions these ACPI battery devices rely on
(e.g. BMOP opregion).
This leads to there being 2 battery power_supply-s registed like this:
~$ acpi
Battery 0: Charging, 84%, 00:49:39 until charged
Battery 1: Unknown, 0%, rate information unavailable
Even if the ACPI battery where to function fine (which on systems
where we have a native PMIC driver it often doesn't) we still do not
want to export the same battery to userspace twice.
This commit adds a blacklist with PMIC ACPI HIDs for which we've a
native battery driver and makes the ACPI battery driver not register
itself when a PMIC on this list is present.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194811
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_lock_battery_dir() / acpi_bus_register_driver() calls in
acpi_battery_init_async() may fail.
Check that they succeeded before undoing them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_dev_found just iterates over all ACPI-ids and sees if one matches.
This means that it will return true for devices which are in the DSDT
but disabled (their _STA method returns 0).
For some drivers it is useful to be able to check if a certain HID
is not only present in the namespace, but also actually present as in
acpi_device_is_present() will return true for the device. For example
because if a certain device is present then the driver will want to use
an extcon or IIO ADC channel provided by that device.
This commit adds a new acpi_dev_present helper which drivers can use
to this end.
Like acpi_dev_found, acpi_dev_present take a HID as argument, but
it also has 2 extra optional arguments to only check for an ACPI
device with a specific UID and/or HRV value. This makes it more
generic and allows it to replace custom code doing similar checks
in several places.
Arguably acpi_dev_present is what acpi_dev_found should have been, but
there are too many users to just change acpi_dev_found without the risk
of breaking something.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
