Commit graph

691,473 commits

Author SHA1 Message Date
Shaohua Li
5067c0469c ata: Add a new flag to destinguish sas controller
SAS controller has its own tag allocation, which doesn't directly match to ATA
tag, so SAS and SATA have different code path for ata tags. Originally we use
port->scsi_host (98bd4be1) to destinguish SAS controller, but libsas set
->scsi_host too, so we can't use it for the destinguish, we add a new flag for
this purpose.

Without this patch, the following oops can happen because scsi-mq uses
a host-wide tag map shared among all devices with some integer tag
values >= ATA_MAX_QUEUE.  These unexpectedly high tag values cause
__ata_qc_from_tag() to return NULL, which is then dereferenced in
ata_qc_new_init().

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
  IP: [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120
  PGD 32adf0067 PUD 32adf1067 PMD 0
  Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
  Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi igb
  i2c_algo_bit ptp pps_core pm80xx libsas scsi_transport_sas sg coretemp
  eeprom w83795 i2c_i801
  CPU: 4 PID: 1450 Comm: cydiskbench Not tainted 4.0.0-rc3 #1
  Hardware name: Supermicro X8DTH-i/6/iF/6F/X8DTH, BIOS 2.1b       05/04/12
  task: ffff8800ba86d500 ti: ffff88032a064000 task.ti: ffff88032a064000
  RIP: 0010:[<ffffffff804fd46e>]  [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120
  RSP: 0018:ffff88032a067858  EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffff8800ba0d2230 RCX: 000000000000002a
  RDX: ffffffff80505ae0 RSI: 0000000000000020 RDI: ffff8800ba0d2230
  RBP: ffff88032a067868 R08: 0000000000000201 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ba0d0000
  R13: ffff8800ba0d2230 R14: ffffffff80505ae0 R15: ffff8800ba0d0000
  FS:  0000000041223950(0063) GS:ffff88033e480000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000058 CR3: 000000032a0a3000 CR4: 00000000000006e0
  Stack:
   ffff880329eee758 ffff880329eee758 ffff88032a0678a8 ffffffff80502dad
   ffff8800ba167978 ffff880329eee758 ffff88032bf9c520 ffff8800ba167978
   ffff88032bf9c520 ffff88032bf9a290 ffff88032a0678b8 ffffffff80506909
  Call Trace:
   [<ffffffff80502dad>] ata_scsi_translate+0x3d/0x1b0
   [<ffffffff80506909>] ata_sas_queuecmd+0x149/0x2a0
   [<ffffffffa0046650>] sas_queuecommand+0xa0/0x1f0 [libsas]
   [<ffffffff804ea544>] scsi_dispatch_cmd+0xd4/0x1a0
   [<ffffffff804eb50f>] scsi_queue_rq+0x66f/0x7f0
   [<ffffffff803e5098>] __blk_mq_run_hw_queue+0x208/0x3f0
   [<ffffffff803e54b8>] blk_mq_run_hw_queue+0x88/0xc0
   [<ffffffff803e5c74>] blk_mq_insert_request+0xc4/0x130
   [<ffffffff803e0b63>] blk_execute_rq_nowait+0x73/0x160
   [<ffffffffa0023fca>] sg_common_write+0x3da/0x720 [sg]
   [<ffffffffa0025100>] sg_new_write+0x250/0x360 [sg]
   [<ffffffffa0025feb>] sg_write+0x13b/0x450 [sg]
   [<ffffffff8032ec91>] vfs_write+0xd1/0x1b0
   [<ffffffff8032ee54>] SyS_write+0x54/0xc0
   [<ffffffff80689932>] system_call_fastpath+0x12/0x17

tj: updated description.

Fixes: 12cb5ce101 ("libata: use blk taging")
Reported-and-tested-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-19 14:14:43 -04:00
Michael Ellerman
5744de542d selftests/timers: Use shared logic to run and install tests
Change the timers Makefile to make use of shared run and install logic
in lib.mk. Destructive tests are installed but not run by default.

Add a new variable, TEST_PROGS_EXTENDED, which is a list of extra
programs to install, but which are not run by the default run_tests
logic.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-19 12:03:58 -06:00
John Stultz
1c0a7498c7 kselftest/timers: Set default threadtest values to simplify execution scripts
In order to keep the kselftest Makefiles simpler, set the threadtest
default values to the ones used in standard run_tests

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-19 12:03:34 -06:00
Mark Jackson
10709c0858 ARM: dts: Update Nanobone dts file
Update dts file to reflect:-
* new flash memory layout
* add missing phy-mode property
* dual_emac now just a boolean
* rename mcp to microchip
* update gpio definition

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 10:59:28 -07:00
Sakari Ailus
80a4158136 ARM: dts: n950, n9: Add primary camera support
Add support for the primary camera of the Nokia N950 and N9.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 10:59:28 -07:00
Sakari Ailus
e52117638b ARM: dts: omap3: Add DT entries for OMAP 3 ISP
The resources the ISP needs are slightly different on 3[45]xx and 3[67]xx.
Especially the phy-type property is different.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[tony@atomide.com: use omap3_scm_general instead of scm_conf for now]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 10:59:28 -07:00
Sakari Ailus
7eec52db36 Documentation: DT: Add bindings for omap3isp
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 10:25:40 -07:00
Nathaniel W Filardo
5e71fc8629 USB: keyspan_pda: add new device id
Add USB VID/PID for Xircom PGMFHUB USB/serial component.  (The hub and SCSI
bridge on that hardware are recognized out of the box by existing drivers.)
Tested VID/PID using new_id and loopback connection and was met with
success, but that's all the testing done.

Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-19 18:04:01 +01:00
Wang Nan
0c8c20779c perf report: Don't allow empty argument for '-t'.
Without this patch, perf report cause segfault if pass "" as '-t':

  $ perf report -t ""

   # To display the perf.data header info, please use --header/--header-only options.
   #
   # Samples: 37  of event 'syscalls:sys_enter_write'
   # Event count (approx.): 37
   #
   # Children    SelfCommand   Shared Object         Symbol
   Segmentation fault

Since -t is used to add field-separator for generate table, -t "" is
actually meanless. This patch defines a new OPT_STRING_NOEMPTY() option
generator to ensure user never pass empty string to that option.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426251114-198991-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:53:28 -03:00
Wang Nan
303cb89a6d perf callchain: Separate eh/debug frame offset cache.
Commit f1f13af99a ("perf callchain: Cache eh/debug frame offset for
dwarf unwind") introduces a cache for .debug_frame and .eh_frame_hdr.
Unfortunately, it makes them share a same cache (dso->frame_offset).
Which causes unwind failure on ARM:

   $ perf test unwind
  Test dwarf unwind: FAILED!

The reason is that, if a dso has '.debug_frame' but doesn't have
'.eh_frame_hdr' (like ARM), dso->frame_offset will be filled by offset
of '.debug_frame' during the first time calling of find_proc_info() ->
read_unwind_spec_debug_frame(), and be regarded to '.eh_frame_hdr' when
the second time calling of find_proc_info() ->
read_unwind_spec_eh_frame(), since '.eh_frame_hdr' is checked prior to
'.debug_frame'.

This patch solves the problem by creating two cache fields for
'.eh_frame_hdr' and '.debug_frame'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/55028BA0.1030701@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:53:27 -03:00
Yunlong Song
1312c8a8fb perf tools: Avoid confusion with preloaded bash function for perf bash completion
Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash
completion script are originally taken from git bash completion script,
these functions may be preloaded before perf bash completion script
runs.

In order to avoid repeating loading the same function twice, some test
constraints are used before these function definitions in the perf bash
completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||').

The problem is that, if these functions in perf bash completion script
are changed for some reason, perf will still use the preloaded bash
functions rather than the customized functions of its own.

As a result, the perf bash completion will behave incorrectly. To get
rid of this problem, a flag can be defined to determine the proper
situation.

And to avoid overwriting the preloaded functions, the names of these
functions in perf bash completion script should be renamed to the
perf-customized ones.

Example:

Before this patch:

 $ type _get_comp_words_by_ref
 _get_comp_words_by_ref is a function
 _get_comp_words_by_ref ()
 {
     local exclude flag i OPTIND=1;
     local cur cword words=();
     local upargs=() upvars=() vcur vcword vprev vwords;
     while getopts "c:i:n:p:w:" flag "$@"; do
         case $flag in
             c)
                 vcur=$OPTARG
             ;;
             i)
                 vcword=$OPTARG
             ;;
             n)
                 exclude=$OPTARG
             ;;
             p)
                 vprev=$OPTARG
             ;;
             w)
                 vwords=$OPTARG
             ;;
         esac;
     done;
     while [[ $# -ge $OPTIND ]]; do
         case ${!OPTIND} in
             cur)
                 vcur=cur
             ;;
             prev)
                 vprev=prev
             ;;
             cword)
                 vcword=cword
             ;;
             words)
                 vwords=words
             ;;
             *)
                 echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2;
                 return 1
             ;;
         esac;
         let "OPTIND += 1";
     done;
     __get_cword_at_cursor_by_ref "$exclude" words cword cur;
     [[ -n $vcur ]] && {
         upvars+=("$vcur");
         upargs+=(-v $vcur "$cur")
     };
     [[ -n $vcword ]] && {
         upvars+=("$vcword");
         upargs+=(-v $vcword "$cword")
     };
     [[ -n $vprev && $cword -ge 1 ]] && {
         upvars+=("$vprev");
         upargs+=(-v $vprev "${words[cword - 1]}")
     };
     [[ -n $vwords ]] && {
         upvars+=("$vwords");
         upargs+=(-a${#words[@]} $vwords "${words[@]}")
     };
     (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}"
 }

As shown above, the _get_comp_words_by_ref is the preloaded function in
fact, rather than the function defined in perf-completion.sh. So if we
happen to change the function for some reason, the result will behave in
a wrong state.

After this patch:

We can set preload_get_comp_words_by_ref="false" to not use the preloaded
function. Instead, it will use the function defined in perf-completion.sh,
which is renamed as __perf_get_comp_words_by_ref to avoid overwriting
the preloaded function _get_comp_words_by_ref.

 $ type __perf_get_comp_words_by_ref
 __perf_get_comp_words_by_ref is a function
 __perf_get_comp_words_by_ref ()
 {
     local exclude cur_ words_ cword_;
     if [ "$1" = "-n" ]; then
         exclude=$2;
         shift 2;
     fi;
     __my_reassemble_comp_words_by_ref "$exclude";
     cur_=${words_[cword_]};
     while [ $# -gt 0 ]; do
         case "$1" in
             cur)
                 cur=$cur_
             ;;
             prev)
                 prev=${words_[$cword_-1]}
             ;;
             words)
                 words=("${words_[@]}")
             ;;
             cword)
                 cword=$cword_
             ;;
         esac;
         shift;
     done
 }

As shown above, the function __perf_get_comp_words_by_ref is loaded and
can work this time.

Note that we do not change the original behavior when those functions are
not preloaded before perf bash completion script runs. In this case,
although the flag is set to "true", the code will still change it to
"false" to use the function defined in perf-completion.sh.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:53:27 -03:00
Yunlong Song
6fdd9cb700 perf tools: Add the bash completion for listing subsubcommands of perf trace
The bash completion does not support listing subsubcommands for 'perf
trace <TAB>', so fix it.

Example:

Before this patch:

 $ perf trace <TAB>
 $

As shown above, the subsubcommands of perf trace does not come out.

After this patch:

 $ perf trace <TAB>
 record

As shown above, the subsubcommands of perf trace can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-13-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:53:26 -03:00
Yunlong Song
33ec0caf6a perf tools: Add the bash completion for listing subsubcommands of perf timechart
The bash completion does not support listing subsubcommands for 'perf
timechart <TAB>', so fix it.

Example:

Before this patch:

 $ perf timechart <TAB>
 $

As shown above, the subsubcommands of perf timechart does not come out.

After this patch:

 $ perf timechart <TAB>
 record

As shown above, the subsubcommands of perf timechart can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-12-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:53:25 -03:00
Yunlong Song
1f9975f14c perf tools: Add the bash completion for listing subsubcommands of perf test
The bash completion does not support listing subsubcommands for 'perf
test <TAB>', so fix it.

Example:

Before this patch:

 $ perf test <TAB>
 $

As shown above, the subsubcommands of perf test does not come out.

After this patch:

 $ perf test <TAB>
 list

As shown above, the subsubcommands of perf test can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-11-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:52:54 -03:00
Yunlong Song
40cae2b779 perf tools: Add the bash completion for listing subsubcommands of perf script
The bash completion does not support listing subsubcommands for 'perf
script <TAB>', so fix it.

Example:

Before this patch:

 $ perf script <TAB>
 $

As shown above, the subsubcommands of perf script does not come out.

After this patch:

 $ perf script <TAB>
 record  report

As shown above, the subsubcommands of perf script can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-10-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:49:39 -03:00
Yunlong Song
e24a110882 perf tools: Add the bash completion for listing subsubcommands of perf help
The bash completion does not support listing subsubcommands for 'perf
help <TAB>', so fix it.

Example:

Before this patch:

 $ perf help <TAB>
 $

As shown above, the subsubcommands of perf help does not come out.

After this patch:

 $ perf help <TAB>
 annotate       buildid-cache  data           evlist         inject
 kvm            lock           probe          report         script
 test           top
 bench          buildid-list   diff           help           kmem
 list           mem            record         sched          stat
 timechart      trace

As shown above, the subsubcommands of perf help can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-9-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:49:39 -03:00
Yunlong Song
01b7160bc6 perf tools: Add the bash completion for listing subsubcommands of perf data
The bash completion does not support listing subsubcommands for 'perf
data <TAB>', so fix it.

Example:

Before this patch:

 $ perf data <TAB>
 $

As shown above, the subsubcommands of perf data does not come out.

After this patch:

 $ perf data <TAB>
 convert

As shown above, the subsubcommands of perf data can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:49:38 -03:00
Yunlong Song
e003ce54d2 perf tools: Fix the bash completion for listing subcommands of perf
The bash completion does not support listing subcommands for 'perf
--<long option> <TAB>'.

Example:

Before this patch:

 $ perf --debug <TAB>
 $

As shown above, the subcommands of perf does not come out.

After this patch:

 $ perf --debug <TAB>
 annotate       buildid-cache  data           evlist         inject
 kvm            lock           probe          report         script
 test           top            version
 bench          buildid-list   diff           help           kmem
 list           mem            record         sched          stat
 timechart      trace

As shown above, the subcommands of perf can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:49:38 -03:00
Yunlong Song
3346b542f4 perf tools: Fix the bash completion to support listing events for --event
The bash completion only supports -e rather than --event, so fix it.

Example:

Before this patch:

 $ perf record --event <TAB>
 $

As shown above, the events of record does not come out.

After this patch:

 $ perf record --event <TAB>
 lignment-faults                   cpu/instructions/
 L1-dcache-prefetch-misses          node-prefetches
 uncore_rbox_0/qpi0_idle_filt/
 branch-instructions                cpu/mem-loads/
 L1-dcache-store-misses             node-prefetch-misses
 uncore_rbox_0/qpi1_date_response/
 branch-load-misses                 cpu-migrations
 L1-dcache-stores                   node-store-misses
 uncore_rbox_0/qpi1_filt_send/
 branch-loads                       dTLB-load-misses
 L1-icache-load-misses              node-stores
 uncore_rbox_0/qpi1_idle_filt/
 ...

As shown above, the events of record can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:49:37 -03:00
Yunlong Song
bc81fad125 perf tools: Fix the bash completion for listing events of perf subcommand record|stat|top -e
The bash completion does not support listing events for 'perf kvm|kmem|
mem|lock|sched record|stat|top -e <TAB>', where 'kvm|kmem|mem|lock|sched'
are all subcommands of perf.

Example:

Before this patch:

 $ perf kvm record -e <TAB>
 $

As shown above, the events of record does not come out.

After this patch:

 $ perf kvm record -e <TAB>
 alignment-faults                   cpu/instructions/
 L1-dcache-prefetch-misses          node-prefetches
 uncore_rbox_0/qpi0_idle_filt/
 branch-instructions                cpu/mem-loads/
 L1-dcache-store-misses             node-prefetch-misses
 uncore_rbox_0/qpi1_date_response/
 branch-load-misses                 cpu-migrations
 L1-dcache-stores                   node-store-misses
 uncore_rbox_0/qpi1_filt_send/
 branch-loads                       dTLB-load-misses
 L1-icache-load-misses              node-stores
 uncore_rbox_0/qpi1_idle_filt/
 ...

As shown above, the events of record can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:49:37 -03:00
Yunlong Song
eee200a6c4 perf tools: Provide the right bash completion for listing options of perf subcommand subsubcommand
The bash completion gives wrong options for 'perf kvm|kmem|mem|lock|
sched subsubcommand --<TAB>', where 'kvm|kmem|mem|lock|sched' are all
subcommands of perf and 'subsubcommand' is a subcommand of 'kvm|kmem|mem
|lock|sched'. In fact, the result incorrectly lists the bash completion
of 'perf subcommand' rather than 'perf subcommand subsubcommand'.

Example:

Before this patch:

 $ perf kvm record --<TAB>
 --guest          --guestkallsyms  --guestmodules   --guestmount
 --guestvmlinux   --host           --input          --output
 --verbose

As shown above, the result is the options of kvm rather than record.

After this patch:

 $ perf kvm record --<TAB>
 --all-cpus          --cgroup            --delay             --group
 --no-buildid        --output            --quiet             --stat
 --uid
 --branch-any        --count             --event             --intr-regs
 --no-buildid-cache  --period            --raw-samples       --tid
 --verbose
 --branch-filter     --cpu               --filter            --mmap-pages
 --no-inherit        --per-thread        --realtime          --timestamp
 --weight
 --call-graph        --data              --freq
 --no-buffering      --no-samples        --pid
 --running-time      --transaction

As shown above, the result is exactly the options of record as we wished.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:49:28 -03:00
Yunlong Song
67afff485b perf tools: Fix the bash completion for listing subsubcommands of perf subcommand
The bash completion does not support listing subsubcommands for 'perf
kvm|kmem|mem|lock|sched --<long option> <TAB>', where 'kvm|kmem|mem|
lock|sched' are all subcommands of perf.

Example:

Before this patch:

 $ perf kvm --verbose <TAB>
 $

As shown above, the subsubcommands of perf kvm does not come out.

After this patch:

 $ perf kvm --verbose <TAB>
 buildid-list  diff          record        report        stat
 top

As shown above, the subsubcommands of perf kvm can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:49:20 -03:00
Yunlong Song
02fde323b9 perf tools: Fix the bash completion for listing options of perf subcommand
The bash completion does not support listing options for 'perf
kvm|kmem|mem|lock|sched --<TAB>', where 'kvm|kmem|mem|lock|sched' are
all subcommands of perf.

Example:

Before this patch:

 $ perf kvm --<TAB>
 $

As shown above, the options of perf kvm does not come out.

After this patch:

 $ perf kvm --<TAB>
 --alloc    --caller   --input    --line     --raw-ip   --sort
 --verbose

As shown above, the options of perf kvm can come out now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:48:56 -03:00
Steven J. Hill
c5b367835c MIPS: Add support for XPA.
Add support for extended physical addressing (XPA) so that
32-bit platforms can access equal to or greater than 40 bits
of physical addresses.

NOTE:
      1) XPA and EVA are not the same and cannot be used
         simultaneously.
      2) If you configure your kernel for XPA, the PTEs
         and all address sizes become 64-bit.
      3) Your platform MUST have working HIGHMEM support.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-19 17:39:49 +01:00
H.J. Lu
76aea7731e perf tools: Fix perf-read-vdsox32 not building and lib64 install dir
Commit:

  c6e5e9fbc3 ("perf tools: Fix building error in x86_64 when dwarf unwind is on")

removed the definition of IS_X86_64 but not all places using it, with
the consequence that perf-read-vdsox32 would not be built anymore, and
the default lib install directory was 'lib' instead of 'lib64'.

Also needs to go to v3.19.

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org # 3.19
Link: http://lkml.kernel.org/r/CAMe9rOqpGVq3D88w+D15ef7sv6G6k57ZeTvxBm46=WFgzo9p1w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-19 13:38:05 -03:00
Brian Norris
0c02acec74 ARM: dts: brcmstb: add IRQ0 controller
This L2 controller handles multiplexing a few different interrupts. We
also need it for configuring the interrupt forwarding masks for the
UART.

With this, we can *now* boot BCM7445 to a prompt using the upstream
kernel + DTB.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-19 09:34:14 -07:00
Pali Rohár
d1f2e5a135 ARM: dts: Remove files omap34xx-hs.dtsi and omap36xx-hs.dtsi
These files are not used by any DTS file anymore.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel  Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 09:34:13 -07:00
Brian Norris
e36fcd13c2 ARM: dts: brcmstb: un-hexify clock frequency
This value makes much more sense in decimal.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-19 09:34:08 -07:00
Johan Hovold
792c17e643 greybus: gpio: add error messages to callbacks not propagating errors
Add error messages on failures to deactivate, set and get operation
handlers as any errors would not be detected by the upper layers (either
because the callbacks are declared void or expected to return a boolean
value).

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:30:38 +01:00
Johan Hovold
7bfa078140 greybus: gpio: refuse to set value of input pins
Add warning and refuse to set output value for pin configured as input,
as the result of such an operation is undefined.

Remove incorrect todo-comment suggesting that the driver could
implicitly switch direction as part of the call.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:30:38 +01:00
Johan Hovold
64d2f4e5f9 greybus: gpio: clean up line-state allocation
Clean up allocation of line-state array.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:30:38 +01:00
Johan Hovold
e5032d8511 greybus: gpio: use dev_err and dev_warn
Use the more informative dev_err and dev_warn for messages, and make the
messages more uniform.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:30:38 +01:00
Johan Hovold
86c6816158 greybus: gpio: fix error handling
Make sure to propagate any errors detected up the call chain.

This specifically means that we will detect failed connection init,
something which is now handled more gracefully by greybus core.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:30:38 +01:00
Johan Hovold
8aff1aceb2 greybus: gpio: make gb_gpio_controller pointer naming consistent
Rename all struct gb_gpio_controller-pointer variables "ggc" for
consistency and readability reason.

This also fixes a bunch of lines that exceeded the 80 columns limit.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:29:40 +01:00
Johan Hovold
bda7e2d112 greybus: gpio: remove unnecessary explicit cast
Remove unnecessary explicit cast of line value.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:29:40 +01:00
Johan Hovold
83d9cddb85 greybus: gpio: remove overly defensive argument verification
Remove overly defensive argument verification in gpio-chip callbacks. We
should trust gpiolib to get this right (or we would not even get any
callback) just like the other gpio drivers do.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:29:40 +01:00
Johan Hovold
65f5a5f161 greybus: gpio: remove redundant argument verification
Remove redundant verification of gpio numbers (which have already been
verified in the gpio-chip callbacks) from greybus-operation helpers.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:29:40 +01:00
Johan Hovold
56c2da1873 greybus: gpio: remove incorrect todo comments
The module reference count is incremented by gpiolib when a gpio is
requested, and the driver callbacks certainly do sleep.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:29:40 +01:00
Johan Hovold
c2a6610686 greybus: gpio: fix truncated debounce times
Fix set_debounce, which silently truncated the time argument to 255us
even though we support 16-bit values.

Also remove the unnecessary explicit cast when verifying the argument.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:29:40 +01:00
Johan Hovold
c0d209a07b greybus: operation: remove unnecessary cast
Remove unnecessary cast of the message size in gb_connection_recv.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:28:19 +01:00
Johan Hovold
ee8f81b096 greybus: operation: use dev_err in gb_operation_sync
Use the more informative dev_err in gb_operation_sync, which includes
the connection device name in the error message (which in turn encodes
the module, interface, bundle and cport ids).

Add missing braces to conditional-construct branches while at it.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:28:19 +01:00
Johan Hovold
25eb732954 greybus: connection: replace custom error function with dev_err
Remove custom connection error function and replace it with dev_err.

The standard error function provides more information in the message
prefix (e.g. includes the interface id), has a well-known semantics
(e.g. does does not add newlines to messages), and is even somewhat
shorter to type.

Note that some uses of the custom function were already adding double
newlines due to the non-standard semantics.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:28:19 +01:00
Ben Dooks
a3dd3befd7 usb: gadget: atmel_usba: use endian agnostic IO on ARM
Change from using the __raw IO accesors to the endian agnostic versions
of readl/writel_relaxed when not on AVR32. This fixes issues with running
big endian on ARMv7.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
--
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Felipe Balbi <balbi@ti.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:28:16 -05:00
John Youn
b48cb02de3 usb: dwc2: pci: Correctly compile dwc2-pci as a module or built-in
The dwc2-pci driver should be compiled as a module when configured to
do so. If the dwc2-pci is configured as a module but actually
built-in, it can cause build errors due to the fact that the
generic-phy will be allowed to compile as a module causing undefined
references.

Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:28:16 -05:00
Fabian Frederick
3463d795bf usb: gadget: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:28:15 -05:00
Joe Perches
557f3586aa usb: gadget: goku_udc: Remove uses of seq_<foo> return values
The seq_printf/seq_puts/seq_putc return values, because they
are frequently misused, will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Miscellanea:

o Coalesce formats, realign arguments
o Create static functions for statement expression macros
o Use c90 style comments instead of c99

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:28:15 -05:00
Yoshihiro Shimoda
00f30d29b4 usb: renesas_usbhs: fix spinlock suspected in a gadget complete function
According to the gadget.h, a "complete" function will always be called
with interrupts disabled. However, sometimes usbhsg_queue_pop() function
is called with interrupts enabled. So, this function should be held by
usbhs_lock() to disable interruption. Also, this driver has to call
spin_unlock() to avoid spinlock recursion by this driver before calling
usb_gadget_giveback_request().
Otherwise, there is possible to cause a spinlock suspected in a gadget
complete function.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:28:15 -05:00
Peter Chen
990919cad5 usb: common: otg-fsm: only signal connect after switching to peripheral
We should signal connect (pull up dp) after we have already
at peripheral mode, otherwise, the dp may be toggled due to
we reset controller or do disconnect during the initialization
for peripheral, then, the host may be confused during the
enumeration, eg, it finds the reset can't succeed, but the
device is still there, see below error message.

hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1

Fixes: the issue existed when the otg fsm code was added.
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:28:15 -05:00
Axel Lin
869aee0f31 usb: phy: Find the right match in devm_usb_phy_match
The res parameter passed to devm_usb_phy_match() is the location where the
pointer to the usb_phy is stored, hence it needs to be dereferenced before
comparing to the match data in order to find the correct match.

Fixes: 410219dcd2 ("usb: otg: utils: devres: Add API's to associate a device with the phy")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: <stable@vger.kernel.org> # v3.6+
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:28:14 -05:00
Johan Hovold
fe4c0e548a greybus: ap: clean up svc link management error path
Return immediately on bundle-init failure when processing SVC link up.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-03-19 17:27:08 +01:00