Commit graph

691,473 commits

Author SHA1 Message Date
Zhaoyang Liu
39df5e8233 mwifiex: get rid of BA setup helper functions
This patch removes BA setup helper routines
mwifiex_is_bastream_setup and  mwifiex_is_amsdu_in_ampdu_allowed.

Current code will use two functions to check bastream setup and
amsdu in ampdu. This patch change these functions to flags, thus
avoiding redundant spin_lock check while dequeuing TX packets.

Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Reviewed-by: Cathy Luo <cluo@marvell.com>
Reviewed-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:12:27 +02:00
Shengzhen Li
b2713f67f7 mwifiex: avoid queue_work while work is ongoing
Current code does not check whether main_work_queue or
rx_work_queue is running when preparing to do queue_work,
this code fix add check before calling queue_work, reducing
unnecessary queue_work switch.

This change instead sets more_task flag to ensure we run main_process
superloop once again.

Signed-off-by: Shengzhen Li <szli@marvell.com>
Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Reviewed-by: Cathy Luo <cluo@marvell.com>
Reviewed-by: Amitkumar Karwar <akarwar@marvell.com>
Reviewed-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:12:25 +02:00
Avinash Patil
ea44f4d04c mwifiex: enhance SD8897 MP aggregation limits
SD8897 support buffers of 4K and 16 such ports can be accomodated.
So basically 64K buffer size in single aggregation is supported.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:12:22 +02:00
Avinash Patil
621599446d mwifiex: rename alloc_rx_buf to alloc_dma_aligned_buf
Rename this function to reflect its purpose correctly.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:12:17 +02:00
Avinash Patil
a9adbcb335 mwifiex: lock main process till reinitialization of vif is over
A crash was detected while changing virtual interface type is in
progress. This was tracked to race condition in accessing bss_priority
table while change is in progress. This patch ensures that main_process
and rx_process works are locked while we change virtual interface.

Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:12:15 +02:00
Nicolas Iooss
a3fa71c40f wl18xx: show rx_frames_per_rates as an array as it really is
In struct wl18xx_acx_rx_rate_stat, rx_frames_per_rates field is an
array, not a number.  This means WL18XX_DEBUGFS_FWSTATS_FILE can't be
used to display this field in debugfs (it would display a pointer, not
the actual data).  Use WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY instead.

This bug has been found by adding a __printf attribute to
wl1271_format_buffer.  gcc complained about "format '%u' expects
argument of type 'unsigned int', but argument 5 has type 'u32 *'".

Fixes: c5d94169e8 ("wl18xx: use new fw stats structures")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:07:03 +02:00
Sebastian Andrzej Siewior
7daa54b747 rt2x00usb: drop rt2x00usb_disable_radio() from rt2800usb_disable_radio()
I have here FRITZ!WLAN USB Stick N v2 / idVendor=057c, idProduct=8501
and every single of this requests ends up with:

|ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x0c  failed for offset 0x0000 with error -32

I was browsing the the vedor code and I haven't seen such request so I
remove it with this patch. If I wasn't look enough or if this error is
expected then please excuse :)

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:06:04 +02:00
Sebastian Andrzej Siewior
92d5e2456d rt2x00usb: check USB's request error code in rt2800usb_autorun_detect()
rt2800usb_autorun_detect() blindly assumes assumes that it worked while
it could have failed. Check the error code here.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:06:01 +02:00
Sebastian Andrzej Siewior
e4fcfaf802 rt2x00usb: initialize the read value in case of failure
My understanding ist that rt2x00usb_register_read() is void and so the
reader is unaware of read errors and assumes that whatever was on the
stack as it was about to read.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:05:56 +02:00
Amitkumar Karwar
6e9344fd8e mwifiex: use del_timer variant in interrupt context
We might be in interrupt context at few places. So replace
del_timer_sync() with del_timer(). This patch fixes a kernel
trace problem seen occasionally during our testing.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:05:01 +02:00
Maithili Hinge
b533be1897 mwifiex: Add support for auto ARP in mwifiex.
This patch adds support for auto ARP feature in mwifiex.
The device will respond to ARP requests from the network
with ARP response in suspended state without waking up the host.
This feature is enabled in the driver by default.

Signed-off-by: Maithili Hinge <maithili@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:04:59 +02:00
Cathy Luo
2c11ab9006 mwifiex: fix a bug in Rx multiport aggregation logic
It's been observed Rx aggregated packets are always followed
by a single Rx packet. This patch improves our logic to add
that extra packet in next aggregation.

Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 18:04:20 +02:00
Alexandre Belloni
8590ca655a ARM: at91: remove useless include
Both drivers using the system timer are now converted to an MFD. mach/at91_st.h
is now useless.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:08 +01:00
Alexandre Belloni
0afb46b248 clocksource: atmel-st: remove mach/hardware dependency
Remove the mach/hardware dependency to prepare the driver for multiplatform
support.
Also switch from setup_irq() to request_irq()

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:07 +01:00
Alexandre Belloni
adf2edfd60 clocksource: atmel-st: use syscon/regmap
The register range from the system timer is also used by the watchdog driver.
Use a regmap to handle concurrent accesses.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:06 +01:00
Alexandre Belloni
b53cdd0322 ARM: at91: time: move the system timer driver to drivers/clocksource
Import at91rm9200_time.c from mach-at91 as timer-atmel-st.c. Further cleanup is
required to get rid of the mach-at91 headers.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:05 +01:00
Alexandre Belloni
bbfc97e1b1 ARM: at91: properly initialize timer
Use clocksource_of_init to initialize the system timer instead of relying on a
custom function.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:04 +01:00
Alexandre Belloni
d8d1c6c8b0 ARM: at91: at91rm9200: remove deprecated arm_pm_restart
Now that a proper driver is available, remove at91rm9200_restart.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:03 +01:00
Alexandre Belloni
9ab45f3fb2 watchdog: at91rm9200: implement restart handler
Restarting the at91rm9200 is done through programming the watchdog and waiting
for it to reset.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:02 +01:00
Alexandre Belloni
8432f9e5e8 watchdog: at91rm9200: use the system timer syscon
Use a syscon regmap to access the system timer registers.

Also, rename the driver atmel_st_watchdog to stop conflicting with
at91sam9_wdt.c

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:01 +01:00
Alexandre Belloni
1aa15f4e00 mfd: syscon: Add atmel system timer registers definition
AT91RM920 has a memory range reserved for timer and watchdog configuration.
Expose those registers so that drivers can make use of the system timer syscon
declared in at91 DTs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:00 +01:00
Alexandre Belloni
b595809b98 ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
The system timer register range is used to handle three different
functionalities: Periodic Interval Timer, Real Time Timer and watchdog. Declare
it as a syscon to be able to get a regmap.
Also declare it as a simple-mfd and its watchdog subnode.

Finally, document the watchdog compatible string.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:02:59 +01:00
Priit Laes
52f119ddea rtlwifi: No need to export rtl_evm_dbm_jaguar anymore
This function is used only by rtl8821ae so move it there

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 17:55:41 +02:00
Priit Laes
54fb66d6fe rtlwifi: Clean rtl_evm_db_to_percentage a bit
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 17:54:11 +02:00
Zefir Kurtisi
387f149a2a ath9k: allow 40MHz radar detection width
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 17:53:10 +02:00
Zefir Kurtisi
58766977ad ath9k: add DFS support for extension channel
In HT40 modes, pulse events on primary and extension
channel are processed individually. If valid, a pulse
event will be fed into the detector
* for primary frequency, or
* for extension frequency (+/-20MHz based on HT40-mode)
* or both

With that, a 40MHz radar will result in two individual
radar events.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 17:53:07 +02:00
Zefir Kurtisi
8252a35ab4 ath9k: restart only triggering DFS detector line
To support HT40 DFS mode, a triggering detector must
reset only itself but not other detector lines.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16 17:53:05 +02:00
Alex Dowad
40346a0327 metag: copy_thread(): rename 'arg' argument to 'kthread_arg'
The 'arg' argument to copy_thread() is only ever used when forking a new
kernel thread. Hence, rename it to 'kthread_arg' for clarity.

Signed-off-by: Alex Dowad <alexinbeijing@gmail.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2015-03-16 15:48:32 +00:00
Andy Shevchenko
9a836c0a63 staging: unisys: print MAC address via %pM
This patch converts code to use %pM specifier instead of placing each
byte on stack.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:36:37 +01:00
Dan Carpenter
bdbceb4de3 staging: unisys: fix some debugfs output
When we removed the ERRDEV() macro we made a small mistake so now it
doesn't print the "Virtual PCI devices" section header.

Fixes: 0aca78449b ('staging: unisys: remove ERRDEV macros')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:36:36 +01:00
Michel von Czettritz
549fb6e399 staging: unisys: fix checkpatch warnings
This fixes "braces {} are not necessary for single statement blocks" in uislib.

Signed-off-by: Michel von Czettritz <michel.von.czettritz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:36:36 +01:00
Somya Anand
4c42d97981 Staging: nvec: use !x instead of x == NULL
Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:28:47 +01:00
Somya Anand
6e3f3bb863 Staging: goldfish: use !x instead of x == NULL
Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:28:47 +01:00
Somya Anand
87e3dbc27c Staging: gdm72xx: use !x instead of x == NULL
Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:28:47 +01:00
Somya Anand
9d877fdbf3 staging: gdm724x: use !x instead of x == NULL
Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
	S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:28:47 +01:00
Haneen Mohammed
93275c8068 Staging: emuxx_udc: replace pr_* with dev_*
dev_* is prefered over pr_* when appropriate dev structure is present.
This patch replace pr_info and pr_warn with its dev_ counterpart.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:28:31 +01:00
Srinivas Pandruvada
62fad137bb HID: hid-sensor-hub: Fix sparse warning
Since I can't change the type of hid_set_field argument 3, using __force __s32 to remove
this warning.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16 16:24:55 +01:00
Haneen Mohammed
964308a6b4 Staging: ft1000: Remove parentheses around right side an assignment
Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:24:19 +01:00
Haneen Mohammed
8126e17f89 Staging: media: Remove parentheses around right side an assignment
Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:24:19 +01:00
Haneen Mohammed
acc4b97b3b Staging: rtl8723au: Remove parentheses around right side an assignment
Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:23:44 +01:00
Somya Anand
7e6eaa9041 Staging: gdm72xx: Iterate list using list_for_each_entry
Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:23:43 +01:00
Somya Anand
ca3d253eb9 Staging: emxx_udc: Iterate list using list_for_each_entry
Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:23:43 +01:00
Somya Anand
d19cb86294 Staging: ft1000: Iterate list using list_for_each_entry
Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:22:16 +01:00
Somya Anand
68f4b73796 Staging: i2o: Move assignment out of if statement
Checkpatch.pl suggest to avoid assignment in if statement.

This patch moves assignments out of the if statement and place
it before the if statement. This is done using following coccinelle
script.

@@
expression E1;
identifier p;
statement S;
@@
- if ((p = E1))
+ p = E1;
+ if (p)
	S

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:22:16 +01:00
Srinivas Pandruvada
eb96483349 HID: hid-sensor-hub: fix attribute read for logical usage id
For defining enumeration values like report or power status events, the
enumeration usage ids are enclosed in a logical collection.  In this case we
need to match logical usage id for pending read on this usage id. For example,
in the below field, when read is requested for 0319, the report will
contain one of the status usages like 850, 851 etc. In this case the raw
event will not match 0319. So when logical collection matches, then wake
up the pending thread.

      Physical(Sensor.OtherCustom)
      Logical(Sensor.0319)
      Application(Sensor.Sensor)
      Usage(6)
        Sensor.0850
        Sensor.0851
        Sensor.0852
        Sensor.0853
        Sensor.0854
        Sensor.0855
      Logical Minimum(1)
      Logical Maximum(5)
      Report Size(8)
      Report Count(1)
      Report Offset(24)
      Flags( Array Absolute )

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16 16:21:18 +01:00
Vatika Harlalka
afbd19eea3 Staging: fbtft: Remove unnecessary print messages
These print functions are called at the beginning
of the function and do not indicate any abnormal condition.

Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:20:49 +01:00
Ksenija Stanojevic
956ff8213b Staging: rtl8192u: Simplify if condition
This patch removes macro true from if condition since variable
priv->ieee80211->LinkDetectInfo.bBusyTraffic is already of type bool.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:20:26 +01:00
Vaishali Thakkar
eb7403756f Staging: rts5208: Use module_pci_driver
Macro module_pci_driver is used for drivers whose init
and exit paths does only register and unregister to pci
API. So, here remove some boilerplate code by using
module_pci_driver. Also, change driver to rtsx_driver,
to avoid implicitly redefining driver_init.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:17:31 +01:00
Vaishali Thakkar
5cc8c56841 Staging: ft1000: Use module_pcmcia_driver
Macro module_pcmcia_driver is used for drivers whose init
and exit paths does only register and unregister to pcmcia
API. So, here remove some boilerplate code by using
module_pcmcia_driver.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:17:31 +01:00
Supriya Karanth
e719bba855 staging: rtl8723au: remove intialization of static ints
static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.

Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL

changes made using coccinelle script:
@@
type T;
identifier var;
@@
static T var
- =0
;

Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 16:17:31 +01:00