Commit graph

691,473 commits

Author SHA1 Message Date
Anton Blanchard
5cca4ace0f netfilter: Don't hide NETFILTER_XT_MATCH_ADDRTYPE behind NETFILTER_ADVANCED
Docker needs NETFILTER_XT_MATCH_ADDRTYPE, so move it out from behind
NETFILTER_ADVANCED and make it default to a module.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-02-11 16:09:29 +01:00
Steven Rostedt (Red Hat)
1e0d6714ac ring-buffer: Do not wake up a splice waiter when page is not full
When an application connects to the ring buffer via splice, it can only
read full pages. Splice does not work with partial pages. If there is
not enough data to fill a page, the splice command will either block
or return -EAGAIN (if set to nonblock).

Code was added where if the page is not full, to just sleep again.
The problem is, it will get woken up again on the next event. That
is, when something is written into the ring buffer, if there is a waiter
it will wake it up. The waiter would then check the buffer, see that
it still does not have enough data to fill a page and go back to sleep.
To make matters worse, when the waiter goes back to sleep, it could
cause another event, which would wake it back up again to see it
doesn't have enough data and sleep again. This produces a tremendous
overhead and fills the ring buffer with noise.

For example, recording sched_switch on an idle system for 10 seconds
produces 25,350,475 events!!!

Create another wait queue for those waiters wanting full pages.
When an event is written, it only wakes up waiters if there's a full
page of data. It does not wake up the waiter if the page is not yet
full.

After this change, recording sched_switch on an idle system for 10
seconds produces only 800 events. Getting rid of 25,349,675 useless
events (99.9969% of events!!), is something to take seriously.

Cc: stable@vger.kernel.org # 3.16+
Cc: Rabin Vincent <rabin@rab.in>
Fixes: e30f53aad2 "tracing: Do not busy wait in buffer splice"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 07:41:42 -05:00
Tom O'Rourke
46efa4abe5 drm/i915: Clamp efficient frequency to valid range
The efficient frequency (RPe) should stay in the range
RPn <= RPe <= RP0.  The pcode clamps the returned value
internally on Broadwell but not on Haswell.

Fix for missing range check in
commit 93ee29203f
Author: Tom O'Rourke <Tom.O'Rourke@intel.com>
Date:   Wed Nov 19 14:21:52 2014 -0800

    drm/i915: Use efficient frequency for HSW/BDW

Reference: http://lists.freedesktop.org/archives/intel-gfx/2015-February/059802.html
Reported-by: Michael Auchter <a@phire.org>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v3.19
Signed-off-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-11 14:09:51 +02:00
Ville Syrjälä
a8b3d52f8b drm/i915: Really ignore long HPD pulses on eDP
Return IRQ_HANDLED from intel_dp_hpd_pulse() to properly
ignore the long HPD pulse on eDP to avoid the never ending
VDD off->HPD->VDD on->VDD off->HPD... cycle.

This fixes a regression intoduced by
 commit b2c5c181ed
 Author: Daniel Vetter <daniel.vetter@ffwll.ch>
 Date:   Fri Jan 23 06:00:31 2015 +0100

    drm/i915: Use symbolic irqreturn for ->hpd_pulse

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-11 14:09:51 +02:00
Ajay Kumar
96976c3d9a drm/exynos: Add DECON driver
This patch is based on exynos-drm-next branch of Inki Dae's tree at:
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git

DECON(Display and Enhancement Controller) is the new IP
in exynos7 SOC for generating video signals using pixel data.

DECON driver can be used to drive 2 different interfaces on Exynos7:
DECON-INT(video controller) and DECON-EXT(Mixer for HDMI)

The existing FIMD driver code was used as a template to create
DECON driver. Only DECON-INT is supported as of now, and
DECON-EXT support will be added later.

The current version of the driver supports video mode displays.

Changelog v2:
- Change config name, DRM_EXYNOS_DECON to DRM_EXYNOS7_DECON.

Signed-off-by: Akshu Agrawal <akshua@gmail.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-02-11 20:27:08 +09:00
Chris Rorvick
0e806151e8 ALSA: line6: toneport: Use explicit type for firmware version
The firmware version is a single byte so have the variable type agree.
Since the address to this member is passed to the read function, using
an int is not even portable.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:41:59 +01:00
Chris Rorvick
12b00157fd ALSA: line6: Use explicit type for serial number
The serial number (aka ESN) is a 32-bit value.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:39:05 +01:00
Chris Rorvick
e474e7fd40 ALSA: line6: Return EIO if read/write not successful
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:37:43 +01:00
Chris Rorvick
f3dfd1be08 ALSA: line6: Return error if device not responding
Put an upper bound on how long we will wait for the device to respond to
a read/write request (i.e., 100 milliseconds) and return an error if
this is reached.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:37:30 +01:00
Chris Rorvick
e64e94df99 ALSA: line6: Add delay before reading status
The device indicates the result of a read/write operation by making the
status available on a subsequent request from the driver.  This is not
ready immediately, though, so the driver is currently slamming the
device with hundreds of pointless requests before getting the expected
response.  Add a two millisecond delay before each attempt.  This is
approximately the behavior observed with version 4.2.7.1 of the Windows
driver.

Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 10:33:55 +01:00
Libin Yang
1b006996b6 ASoC: Intel: Clean data after SST fw fetch
The BDW audio firmware DSP manages the DMA and the DMA cannot be
stopped exactly at the end of the playback stream. This means
stale samples may be played at PCM stop unless the driver copies
silence to the subsequent periods.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-11 09:58:15 +01:00
Rusty Russell
d9bab50aa4 lguest: remove NOTIFY call and eventfd facility.
Disappointing, as this was kind of neat (especially getting to use RCU
to manage the address -> eventfd mapping).  But now the devices are PCI
handled in userspace, we get rid of both the NOTIFY hypercall and
the interface to connect an eventfd.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:46 +10:30
Rusty Russell
00f8d54651 lguest: remove NOTIFY facility from demonstration launcher.
This was only used for early console, now we can get rid of it altogether.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:45 +10:30
Rusty Russell
a561adfaec lguest: use the PCI console device's emerg_wr for early boot messages.
This involves manually checking the console device (which is always in
slot 1 of bus 0) and using the window in VIRTIO_PCI_CAP_PCI_CFG to
program it (as we can't map the BAR yet).

We could in fact do this much earlier, but we wait for the first
write from the virtio_cons_early_init() facility.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:44 +10:30
Rusty Russell
713e3f7224 lguest: always put console in PCI slot #1.
This simplifies the early probe.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:44 +10:30
Rusty Russell
59eba788db lguest: support backdoor window.
The VIRTIO_PCI_CAP_PCI_CFG in the PCI virtio 1.0 spec allows access to
the BAR registers without mapping them.  This is a compulsory feature,
and we implement it here.

There are some subtleties involving access widths which we should
note:

4.1.4.7.1 Device Requirements: PCI configuration access capability

...
   Upon detecting driver write access to pci_cfg_data, the device MUST
   execute a write access at offset cap.offset at BAR selected by
   cap.bar using the first cap.length bytes from pci_cfg_data.

   Upon detecting driver read access to pci_cfg_data, the device MUST
   execute a read access of length cap.length at offset cap.offset at
   BAR selected by cap.bar and store the first cap.length bytes in
   pci_cfg_data.

So, for a write, we copy into the pci_cfg_data window, then write from
there out to the BAR.  This works correctly if cap.length != width of
write.  Similarly, for a read, we read into window from the BAR then
read the value from there.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:43 +10:30
Rusty Russell
e8330d9bc1 lguest: support emerg_wr in console device in example launcher.
This is a magic register which causes a character to be outputted: it can
be used even before the device is configured.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:43 +10:30
Rusty Russell
b3e28b65de lguest: remove lguest bus definitions from header.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:42 +10:30
Rusty Russell
d9028eda7b lguest: remove support for lguest bus in demonstration launcher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:42 +10:30
Rusty Russell
e68ccd1f9d lguest: remove support for lguest bus.
The demonstration launcher now uses PCI entirely.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:41 +10:30
Rusty Russell
eb39f83372 lguest: define VIRTIO_CONFIG_NO_LEGACY in example launcher.
We only support virtio 1.0 now

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:40 +10:30
Rusty Russell
ebff01137a lguest: Convert console device to virtio 1.0 PCI.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:40 +10:30
Rusty Russell
0d5b5d399f lguest: Convert entropy device to virtio 1.0 PCI.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:39 +10:30
Rusty Russell
bf6d40344d lguest: Convert net device to virtio 1.0 PCI.
The only real change here (other than using the PCI bus) is that we
didn't negotiate VIRTIO_NET_F_MRG_RXBUF before, so the format of the
packet header changed with virtio 1.0; we need TUNSETVNETHDRSZ on the
tun fd to tell it about the extra two bytes.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:39 +10:30
Rusty Russell
5051654764 lguest: Convert block device to virtio 1.0 PCI.
We remove SCSI support (which was removed for 1.0) and VIRTIO_BLK_F_FLUSH
feature flag (removed too, since it's compulsory for 1.0).

The rest is mainly mechanical.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:38 +10:30
Rusty Russell
8e70946943 lguest: add a dummy PCI host bridge.
Otherwise Linux fails to find the bus.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:38 +10:30
Rusty Russell
3e0e5f2640 lguest: fix failure to find linux/virtio_types.h
We want to use the local kernel headers, but -I../../include/uapi leads us into
a world of hurt.  Instead we create a dummy include/ dir with symlinks.

If we just use #include "../../include/uapi/linux/virtio_blk.h" we get:

	../../include/uapi/linux/virtio_blk.h:31:32: fatal error: linux/virtio_types.h: No such file or directory
	 #include <linux/virtio_types.h>

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:37 +10:30
Rusty Russell
9315307710 lguest: implement virtio-PCI MMIO accesses.
For each device, We need to include the vendor capabilities to demark
where virtio common, notification and ISR regions are (we put them
all in BAR0).

We need to handle the switching of the virtqueues using the accessors.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:36 +10:30
Rusty Russell
d7fbf6e95e lguest: add PCI config space emulation to example launcher.
This handles ioport 0xCF8 and 0xCFC accesses, which are used to
read/write PCI device config space.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:36 +10:30
Rusty Russell
6a54f9ab0d lguest: decode mmio accesses for PCI in example launcher.
We don't do anything with them yet (emulate_mmio_write and
emulate_mmio_read are stubs), but we decode the instructions and
search for the device they're hitting.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:35 +10:30
Rusty Russell
0a6bcc183f lguest: add MMIO region allocator in example launcher.
This is where we point our PCI BARs, so that we can intercept MMIO
accesses.  We tell the kernel about it so any faults in this area are
directed to us.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:35 +10:30
Rusty Russell
e1b83e2788 lguest: Override pcibios_enable_irq/pcibios_disable_irq to our stupid PIC
This lets us deliver interrupts for our emulated PCI devices using our
dumb PIC, and not emulate an 8259 and PCI irq mapping tables or whatever.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:34 +10:30
Rusty Russell
ee72576c14 lguest: disable ACPI explicitly.
Once we add PCI, it starts trying to manage our interrupts.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:34 +10:30
Rusty Russell
7313d5217e lguest: add iomem region, where guest page faults get sent to userspace.
This lets us implement PCI.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:33 +10:30
Rusty Russell
d1c29465b8 lguest: don't disable iospace.
This no longer speeds up boot (IDE got better, I guess), but it does stop
us probing for a PCI bus.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:32 +10:30
Rusty Russell
48fd6b71d6 lguest: suppress PS/2 keyboard polling.
While hacking on getting I/O out to the lguest launcher, I noticed
that returning 0xFF for the PS/2 keyboard status made it spin for a
while thinking there was a key pending.  Fix this by returning 1
instead of 0xFF.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:32 +10:30
Rusty Russell
c565650b10 lguest: send trap 13 through to userspace.
We copy 7 bytes at eip for userspace's instruction decode; we have to
carefully handle the case where eip is at the end of a page.  We can't
leave this to userspace since kernel has all the page table decode
logic.

The decode logic moves to userspace, basically unchanged.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:31 +10:30
Rusty Russell
c9e433e4b8 lguest: add infrastructure to check mappings.
We normally abort the guest unconditionally when it gives us a bad address,
but in the next patch we want to copy some bytes which may not be mapped.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:31 +10:30
Rusty Russell
8ed313001a lguest: add infrastructure for userspace to deliver a trap to the guest.
This is required for instruction emulation to move to userspace.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:30 +10:30
Rusty Russell
69a09dc174 lguest: write more information to userspace about pending traps.
This is preparation for userspace handling MMIO and ioport accesses.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:30 +10:30
Rusty Russell
18c137371b lguest: add operations to get/set a register from the Launcher.
We use the ptrace API struct, and we currently don't let them set
anything but the normal registers (we'd have to filter the others).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:29 +10:30
Rusty Russell
a454bb36ca lguest: have --rng read from /dev/urandom not /dev/random.
Theoretical debates aside, now it boots.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 16:47:28 +10:30
Nicolin Chen
541b03ad6c ASoC: fsl_ssi: Fix the incorrect limitation of the bit clock rate
According to i.MX Reference Manual, the bit-clock frequency generated
by SSI must be never greater than 1/5 of the peripheral clock frequency.

This peripheral clock, however, is not baudclk but the IPG clock (i.e.
ssi_private->clk in the fsl_ssi driver).

So this patch just simply fixes the incorrect limitation applied to
the bit clock (baudclk) rate.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-11 13:46:07 +08:00
Guenter Roeck
b4e2754522 spi: sc18is602: Support multiple devices on a single I2C bus if DT is configured
The driver currently only supports a single device per I2C bus since it uses
the I2C bus number to set the SPI bus number. This makes it impossible to
connect more than one chip to a single I2C bus.

We don't want to use dynamic bus numbers unconditionally since this would
result in every instantiation getting a different bus number starting with
65,535 counting down unless devicetree is configured. If devicetree is
configured, however, the SPI bus number is obtained from devicetree
data. So we can use dynamic SPI bus numbers in this case.

Reported-and-Tested-by: Marco Menchise <marco.menchise@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-11 13:42:29 +08:00
Dave Airlie
85840c76d8 imx-drm fixes for IPUv3 DC and i.MX5 IPUv3 IC and TVE
- Corrected handling of wait_for_completion_timeout return value
   when disabling IPUv3 DC channels
 - Fixed error return value propagation in TVE mode_set
 - Fixed IPUv3 register offsets for IC module on i.MX51 and i.MX53
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUyJYwAAoJEFDCiBxwnmDr4IsP/2ZoSigCq3vzanc2L15Eb+YQ
 P3Qsy3ZzT+isPoNyG9jblRcZb18mVTHhbC9uD4Nj0EA0C4OwUug6YXgJ4fvoqbD1
 RWhg07k52Adsmv9E87i5ib7MATqznQTvjSu8N19i+G0/zr8Fy7omgrzn5GlGFQby
 1ru3KjhZ7miVBxzKc/W4//V5zMBo2N6dbiHXoh8LA8Xi6fogcPtWLsrR0Eov/0Yi
 6hffPthlTKuXQ9zSmoR4TqEPeRbuBFucX3aS0FslH8JFaS/zcYjIy1H4jqv5tHLV
 JP2Xq1I3U2fEstms1473Qhloq3p74YbdrwchLGyDKacbJi2gOeLV3diogQnk7dXF
 8IphRi+EcV2wq22zBeLMzrizWShpRW/vsoZRwjGJ0ntP8nspSSwNT7ucF5PlAHxH
 Sv4vH6e3gwu+FxE2Q3xVHn8JDWCMMietFG/YyJEqLDBfhPWp716ME3FKEd1aQgVM
 WIuQbYzT0BrCJR9Gx6hHnVZehRaNxy+/gQ1A3Jo7hxyq1O7MmnMspRUOiunv1ZwM
 pOvit+7GYoXrdJ8DJ49+Fce2a3fjLv+z3TAab+LTgM6A4FIK7lfHyft6i8w9eHxp
 6Tf5iZ9i7zR/PJ6Zrglawmjre6C7OpbcgxL++SjD3Xo3uqPZespUMz72suJmEb5k
 80uP9AWX5C/uVIaynoP4
 =tRBf
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-fixes-2015-01-28' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm fixes for IPUv3 DC and i.MX5 IPUv3 IC and TVE

- Corrected handling of wait_for_completion_timeout return value
  when disabling IPUv3 DC channels
- Fixed error return value propagation in TVE mode_set
- Fixed IPUv3 register offsets for IC module on i.MX51 and i.MX53

* tag 'imx-drm-fixes-2015-01-28' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-v3: Fix IC control register offset
  drm: imx: imx-tve: Check and propagate the errors
  gpu: ipu-v3: wait_for_completion_timeout does not return negative status
2015-02-11 15:35:26 +10:00
Dave Airlie
79a44c16b1 Merge branch 'drm-sti-next-2015-02-04' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next
Those patches improve audio info frame management, add pixel formats
support and fix minor issues.

* 'drm-sti-next-2015-02-04' of git://git.linaro.org/people/benjamin.gaignard/kernel:
  drm: sti: HDMI add audio infoframe
  drm: sti: add support of XBGR8888 for gdp plane
  drm: sti: add support of ABGR8888 for gdp plane
  drm: sti: fix static checker warning in sti_awg_utils
  drm: sti: fix check for clk_pix_main
2015-02-11 15:34:02 +10:00
Dave Airlie
ae6d57d12a Merge tag 'topic/drm-misc-2015-02-06' of git://anongit.freedesktop.org/drm-intel into drm-next
Flushing out my drm-misc queue with a few oddball things all over.

* tag 'topic/drm-misc-2015-02-06' of git://anongit.freedesktop.org/drm-intel:
  drm: Use static attribute groups for managing connector sysfs entries
  drm: remove DRM_FORMAT_NV12MT
  drm/modes: Print the mode status in human readable form
  drm/irq: Don't disable vblank interrupts when already disabled
2015-02-11 15:33:02 +10:00
Al Viro
750d8065d8 crypto: Fix regressions caused by iov_iter changes.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-10 21:24:55 -08:00
Rusty Russell
be8ff5952a virtio: don't require a config space on the console device.
Strictly, it's only needed when we have features (size or multiport).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11 15:03:17 +10:30
Rusty Russell
7abb568dbb virtio_pci: use 16-bit accessor for queue_enable.
Since PCI is little endian, 8-bit access might work, but the spec section
is very clear on this:

  4.1.3.1 Driver Requirements: PCI Device Layout

  The driver MUST access each field using the “natural” access method,
  i.e. 32-bit accesses for 32-bit fields, 16-bit accesses for 16-bit
  fields and 8-bit accesses for 8-bit fields.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-11 15:03:16 +10:30