Commit graph

691,473 commits

Author SHA1 Message Date
Andy Shevchenko
108cc2e7d2 SFI: fix compiler warnings
drivers/sfi/sfi_core.c:164:26: warning: no previous prototype for ‘sfi_map_table’ [-Wmissing-prototypes]
drivers/sfi/sfi_core.c:192:6: warning: no previous prototype for ‘sfi_unmap_table’ [-Wmissing-prototypes]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2014-12-03 18:49:20 -05:00
Rafael J. Wysocki
d30d819dc8 PM: Drop CONFIG_PM_RUNTIME from the driver core
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM or even may be dropped entirely in some cases.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in the PM core code.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:46:58 +01:00
Ulf Hansson
cffa91380d ARM: shmobile: Convert to genpd flags for PM clocks for R-mobile
Instead of using the dev_ops ->stop|start() callbacks for genpd, let's
convert to use genpd's flag field and set it to GENPD_FLAG_PM_CLK.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:44:44 +01:00
Ulf Hansson
9c6a973629 ARM: shmobile: Convert to genpd flags for PM clocks for r8a7779
Instead of using the dev_ops ->stop|start() callbacks for genpd, let's
convert to use genpd's flag field and set it to GENPD_FLAG_PM_CLK.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:44:44 +01:00
Ulf Hansson
c11f6f5bb1 PM / Domains: Initial PM clock support for genpd
It's quite common for PM domains to use PM clocks. Typically from SOC
specific code, the per device PM clock list is created and
pm_clk_suspend|resume() are invoked to handle clock gating/ungating.

A step towards consolidation is to integrate PM clock support into
genpd, which is what this patch does.

In this initial step, the calls to the pm_clk_suspend|resume() are
handled within genpd, but the per device PM clock list still needs to
be created from SOC specific code. It seems reasonable to have gendp to
handle that as well, but that left to future patches to address.

It's not every users of genpd that are keen on using PM clocks, thus we
need to provide this a configuration option for genpd. Therefore let's
add flag field in the genpd struct to keep this information and define
a new GENDP_FLAG_PM_CLK bit for it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:44:44 +01:00
Bartlomiej Zolnierkiewicz
0c570c183a cpuidle: add MAINTAINERS entry for ARM Exynos cpuidle driver
Since there has been quite a lot of development going on for
ARM Exynos cpuidle driver recently I would like to add separate
MAINTAINERS entry for it and add myself as the primary maintainer.

The merging process would remain (almost) unchanged with patches
going (with my Ack) through Daniel's or Kukjin's tree.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-04 00:41:13 +01:00
Dudley Du
f68a95cda6 Input: cyapa - fix resuming the device
Chage b1cfa7b438 tried to get away form using
irq in cyapa structure and use client->irq instead, but missed a couple of
spots making the touchpad inoperative after resume.

Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Dudley Du <dudley.dulixin@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03 15:39:14 -08:00
Alexander Stein
f2d347ff70 Input: gpio_keys - add device tree support for interrupt only keys
This features already exists for board config setups. Add support for
device tree based systems.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03 15:28:39 -08:00
Geert Uytterhoeven
e147af492e Input: amikbd - allocate temporary keymap buffer on the stack
Allocate the temporary buffer needed for initialization of the console
keyboard maps (512 bytes, as NR_KEYS = 256) on the stack instead of
statically, to reduce kernel size.

add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-512 (-512)
function                                     old     new   delta
temp_map                                     512       -    -512

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03 15:28:27 -08:00
Geert Uytterhoeven
545e625325 Input: amikbd - fix build if !CONFIG_HW_CONSOLE
If CONFIG_HW_CONSOLE is not set:

drivers/built-in.o: In function `amikbd_probe':
amikbd.c:(.init.text+0x3e4e): undefined reference to `key_maps'
amikbd.c:(.init.text+0x3dd4): undefined reference to `key_maps'

To fix this, extract the initialization of the console keyboard maps
into amikbd_init_console_keymaps(), protected by #ifdef
CONFIG_HW_CONSOLE.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03 15:28:27 -08:00
Dan Carpenter
3b5005e920 Input: lm8323 - missing error check in lm8323_set_disable()
The missing error handling here is not especially harmful but static
checkers complain that "i" can be used uninitialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03 15:28:26 -08:00
Aniroop Mathur
939ffb1712 Input: initialize device counter variables with -1
Let's initialize atomic_t variables keeping track of number of various
devices created so far with -1 in order to avoid extra subtraction
operation.

Signed-off-by: Aniroop Mathur <aniroop.mathur@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03 15:27:17 -08:00
Christian König
6d2d13dd0e drm/radeon: use pointers instead of indexes for CS chunks
Nobody is interested at which index the chunk is. What's needed is
a pointer to the chunk. Remove unused chunk_id field as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03 18:26:53 -05:00
Christian König
466be3386f drm/radeon: remove duplicates check
Completely unnecessary since the ww_mutex used to reserve a buffer
can detect double reservations from the same thread anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03 18:26:53 -05:00
Christian König
aa35071c59 drm/ttm: optionally move duplicates to a separate list
This patch adds an optional list_head parameter to ttm_eu_reserve_buffers.
If specified duplicates in the execbuf list are no longer reported as errors,
but moved to this list instead.

Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03 18:26:52 -05:00
Alex Deucher
5e5c21cac1 drm/radeon: check the right ring in radeon_evict_flags()
Check the that ring we are using for copies is functional
rather than the GFX ring.  On newer asics we use the DMA
ring for bo moves.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2014-12-03 18:26:51 -05:00
Alex Deucher
6554d9a0e6 drm/radeon: fix copy paste typos in fan control for si/ci
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03 18:26:51 -05:00
Tomeu Vizoso
61c7cddfad clk: change clk_debugfs_add_file to take a struct clk_hw
Instead of struct clk, as this should be only used by providers.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03 15:15:35 -08:00
Tomeu Vizoso
920f1c7472 clk: Don't expose __clk_get_accuracy
As it's only used internally, in drivers/clk/clk.c.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03 15:15:34 -08:00
Tomeu Vizoso
10cdfe54da clk: Don't try to use a struct clk* after it could have been freed
As __clk_release could call kfree on clk and then we wouldn't have a safe way
of getting the module that owns the clock.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Fixes: fcb0ee6a3d ("clk: Implement clk_unregister")
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03 15:15:34 -08:00
Tomeu Vizoso
4afbe1760d clk: Remove unused function __clk_get_prepare_count
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03 15:15:34 -08:00
Markus Elfring
c46ca3c831 of: Delete unnecessary check before calling "of_node_put()"
The of_node_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-03 23:12:41 +00:00
Grant Likely
70161ff336 of: Drop ->next pointer from struct device_node
The ->next pointer in struct device_node is a hanger-on from when it was
used to iterate over the whole tree by a particular device_type property
value. Those days are long over, but the fdt unflattening code still
uses it to put nodes in the unflattened tree into the same order as node
in the flat tree. By reworking the unflattening code to reverse the list
after unflattening all the children of a node, the pointer can be
dropped which gives a small amount of memory savings.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Frank Rowand <frank.rowand@sonymobile.com>
Cc: Gaurav Minocha <gaurav.minocha.os@gmail.com>
2014-12-03 23:12:40 +00:00
Fabio Estevam
5267720e75 spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y
Since commit ce79d54ae4 ("spi/of: Add OF notifier handler") the
following warning is seen on a imx53 system that has CONFIG_OF_DYNAMIC=n:

[    0.048119] ------------[ cut here ]------------
[    0.048146] WARNING: CPU: 0 PID: 1 at drivers/spi/spi.c:2419 spi_init+0x60/0xa8()
[    0.048158] Modules linked in:
[    0.048183] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-next-20141126-00003-g9388e85 #2080
[    0.048193] Hardware name: Freescale i.MX53 (Device Tree Support)
[    0.048203] Backtrace:
[    0.048235] [<80011f74>] (dump_backtrace) from [<80012110>] (show_stack+0x18/0x1c)
[    0.048246]  r6:00000973 r5:00000000 r4:00000000 r3:00000000
[    0.048284] [<800120f8>] (show_stack) from [<806b3ad8>] (dump_stack+0x88/0xa4)
[    0.048312] [<806b3a50>] (dump_stack) from [<8002a55c>] (warn_slowpath_common+0x80/0xbc)
[    0.048320]  r5:8096cfcc r4:00000000
[    0.048343] [<8002a4dc>] (warn_slowpath_common) from [<8002a5bc>] (warn_slowpath_null+0x24/0x2c)
[    0.048354]  r8:8096cf6c r7:809355ec r6:ddcd7c00 r5:812029e4 r4:00000000
[    0.048389] [<8002a598>] (warn_slowpath_null) from [<8096cfcc>] (spi_init+0x60/0xa8)
[    0.048405] [<8096cf6c>] (spi_init) from [<80008a7c>] (do_one_initcall+0x88/0x1e0)
[    0.048415]  r5:8099e018 r4:8099e018
[    0.048438] [<800089f4>] (do_one_initcall) from [<80935e38>] (kernel_init_freeable+0x110/0x1e0)
[    0.048448]  r10:80980700 r9:809806e4 r8:000000cc r7:809355ec r6:809f8940 r5:00000002
[    0.048478]  r4:8098d744
[    0.048508] [<80935d28>] (kernel_init_freeable) from [<806ae574>] (kernel_init+0x10/0xf4)
[    0.048517]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:806ae564
[    0.048547]  r4:00000000
[    0.048565] [<806ae564>] (kernel_init) from [<8000ed68>] (ret_from_fork+0x14/0x2c)
[    0.048574]  r4:00000000 r3:00000000
[    0.048616] ---[ end trace 405a65d177dae4fd ]---

Only check of_reconfig_notifier_register() in the CONFIG_OF_DYNAMIC=y case,
as intended by commit ce79d54ae4.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-03 23:12:39 +00:00
Leif Lindholm
7914a7c565 of: support passing console options with stdout-path
Support specifying console options (like with console=ttyXN,<options>)
by appending them to the stdout-path property after a separating ':'.

Example:
        stdout-path = "uart0:115200";

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
[grant.likely: minor rework to shorten the diffstat]
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-03 23:12:37 +00:00
Leif Lindholm
75c28c09af of: add optional options parameter to of_find_node_by_path()
Update of_find_node_by_path():
1) Rename function to of_find_node_opts_by_path(), adding an optional
   pointer argument. Provide a static inline wrapper version of
   of_find_node_by_path() which calls the new function with NULL as
   the optional argument.
2) Ignore any part of the path beyond and including the ':' separator.
3) Set the new provided pointer argument to the beginning of the string
   following the ':' separator.
4: Add tests.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-03 23:12:36 +00:00
Leif Lindholm
2a9d832cc9 of: Add bindings for chosen node, stdout-path
Add a global binding for the chosen node.  Include a description of the
stdout-path, and an explicit statement on its extra options in the
context of a UART console.

Opening description stolen from www.devicetree.org, and part of the
remaining text provided by Mark Rutland.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
[grant.likely: remove reference to uart_parse_options]
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-12-03 23:12:35 +00:00
Alex Elder
82b5e3feb7 greybus: record type in operation structure
I've gone back and forth on this, but now that I'm looking at
asynchronous operations I know that the asynchronous callback will
want to know what type of operation it is handling, and right now
that's only available in the message header.

So record an operation's type in the operation structure, and use
it in a few spots where the header type was being used previously.
Pass the type to gb_operation_create_incoming() so it can fill
it in after the operation has been created.

Clean up the crap comments above the definition of the operation
structure.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:09:12 -08:00
Alex Elder
746e0ef95a greybus: use null pointer for empty payload
Currently message->payload always points to the address immediately
following the header in a message.  If the payload length is 0, this
is not a valid pointer.

Change the code to assign a null pointer to the payload in this
case.  I have verified that no code dereferences the payload pointer
unless the payload is known to have non-zero size.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:08:17 -08:00
Alex Elder
7cfa699556 greybus: only record message payload size
An asynchronous operation will want to know how big the response
message it receives is.  Rather than require the sender to record
that information, expose a new field "payload_size" available to
the protocol code for this purpose.

An operation message consists of a header and a payload.  The size
of the message can be derived from the size of the payload, so
record only the payload size and not the size of the whole message.
Reorder the fields in a message structure.

Update the description of the message header structure.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:08:17 -08:00
Alex Elder
7a9366aa1e greybus: don't let i2c code assume non-null payload pointer
This is in preparation for an upcoming patch, which makes the
payload pointer be NULL when a message has zero bytes of payload.

It ensures a null payload pointer never gets dereferenced.  To do
this we pass the response structure to gb_i2c_transfer_response()
rather than just its data, and if it's null, returning immediately.

Rearrange the logic in gb_i2c_transfer_operation() a bit.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:08:17 -08:00
Alex Elder
93bbe859b7 greybus: set up connection->private properly
The connection->private pointer should refer to a protocol-specific
data structure.  Change two protocol drivers (USB and vibrator) so
they now set this.

In addition, because the setup routine may need access to the
data structure, the private pointer should be set early--as
early as possible.  Make the UART, i2c, and GPIO protocol drivers
set the private pointer earlier.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:08:17 -08:00
Alex Elder
62749a056a greybus: fix an error message
The error message printed by gb_operation_sync() if the operation
fails is wrong.  Fix it.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:08:17 -08:00
Alex Elder
c25572ca94 greybus: introduce gb_operation_request_send_sync()
Define a new function used to initiate a synchronous operation.
It sends the operation request message and doesn't return until
the response has been received and/or the operation's result
has been set.

This gets rid of the convention that a null callback pointer
signifies a synchronous operation.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:05:58 -08:00
Alex Elder
4afb7fd015 greybus: make op_cycle atomic (again)
There's no need to protect updating a connections operation id cycle
counter with the operations spinlock.   That spinlock protects
connection lists, which do not interact with the cycle counter.
All that we require is that it gets updated atomically, and we
can express that requirement in its type.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:05:58 -08:00
Alex Elder
afb2e1342e greybus: get rid of pending operations list
A connection has two lists of operations, and an operation is always
on one or the other of them.  One of them contains the operations
that are currently "in flight".

We really don't expect to have very many in-flight operations on any
given connection (in fact, at the moment it's always exactly one).
So there's no significant performance benefit to keeping these in a
separate list.  An in-flight operation can also be distinguished by
its errno field holding -EINPROGRESS.

Get rid of the pending list, and search all operations rather than
the pending list when looking up a response message's operation.
Rename gb_pending_operation_find() accordingly.

There's no longer any need to remove operations from the pending
list, and the insertion function no longer has anything to do with a
pending list.  Just open code what was the insertion function (it
now has only to do with assigning the operation id).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:05:58 -08:00
Alex Elder
0ba02c4d16 greybus: don't use 0 as an operation id
Stop allowing 0x0000 to be used as an operation id.  That id will be
reserved for use by operations that will return no response message.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-12-03 15:05:58 -08:00
Dave Chinner
6044e4386c Merge branch 'xfs-misc-fixes-for-3.19-2' into for-next
Conflicts:
	fs/xfs/xfs_iops.c
2014-12-04 09:46:17 +11:00
Brian Foster
b29c70f598 xfs: split metadata and log buffer completion to separate workqueues
XFS traditionally sends all buffer I/O completion work to a single
workqueue. This includes metadata buffer completion and log buffer
completion. The log buffer completion requires a high priority queue to
prevent stalls due to log forces getting stuck behind other queued work.

Rather than continue to prioritize all buffer I/O completion due to the
needs of log completion, split log buffer completion off to
m_log_workqueue and move the high priority flag from m_buf_workqueue to
m_log_workqueue.

Add a b_ioend_wq wq pointer to xfs_buf to allow completion workqueue
customization on a per-buffer basis. Initialize b_ioend_wq to
m_buf_workqueue by default in the generic buffer I/O submission path.
Finally, override the default wq with the high priority m_log_workqueue
in the log buffer I/O submission path.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:43:17 +11:00
Dave Chinner
32296f865e xfs: fix set-but-unused warnings
The kernel compile doesn't turn on these checks by default, so it's
only when I do a kernel-user sync that I find that there are lots of
compiler warnings waiting to be fixed. Fix up these set-but-unused
warnings.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:43:17 +11:00
Dave Chinner
9a2cc41cda xfs: move type conversion functions to xfs_dir.h
These are currently considered private to libxfs, but they are
widely used by the userspace code to decode, walk and check
directory structures. Hence they really form part of the external
API and as such need to bemoved to xfs_dir2.h.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:43:17 +11:00
Dave Chinner
1b767ee386 xfs: move ftype conversion functions to libxfs
These functions are needed in userspace for repair and mkfs to
do the right thing. Move them to libxfs so they can be easily
shared.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:43:17 +11:00
Dave Chinner
2d3d0c53df xfs: lobotomise xfs_trans_read_buf_map()
There's a case in that code where it checks for a buffer match in a
transaction where the buffer is not marked done. i.e. trying to
catch a buffer we have locked in the transaction but have not
completed IO on.

The only way we can find a buffer that has not had IO completed on
it is if it had readahead issued on it, but we never do readahead on
buffers that we have already joined into a transaction. Hence this
condition cannot occur, and buffers locked and joined into a
transaction should always be marked done and not under IO.

Remove this code and re-order xfs_trans_read_buf_map() to remove
duplicated IO dispatch and error handling code.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:43:13 +11:00
Dave Chinner
cdc9cec7c0 xfs: active inodes stat is broken
vn_active only ever gets decremented, so it has a very large
negative number.  Make it track the inode count we currently have
allocated properly so we can easily track the size of the inode
cache via tools like PCP.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:42:40 +11:00
Dave Chinner
4db431f57b xfs: cleanup xfs_bmse_merge returns
Signed-off-by: Dave Chinner <dchinner@redhat.com>

xfs_bmse_merge() has a jump label for return that just returns the
error value. Convert all the code to just return the error directly
and use XFS_WANT_CORRUPTED_RETURN. This also allows the final call
to xfs_bmbt_update() to return directly.

Noticed while reviewing coccinelle return cleanup patches and
wondering why the same return pattern as in xfs_bmse_shift_one()
wasn't picked up by the checker pattern...

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:42:40 +11:00
Dave Chinner
b11bd671ba xfs: cleanup xfs_bmse_shift_one goto mess
xfs_bmse_shift_one() jumps around determining whether to shift or
merge, making the code flow difficult to follow. Clean it up and
use direct error returns (including XFS_WANT_CORRUPTED_RETURN) to
make the code flow better and be easier to read.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:42:24 +11:00
Dave Chinner
7a1df15616 xfs: fix premature enospc on inode allocation
After growing a filesystem, XFS can fail to allocate inodes even
though there is a large amount of space available in the filesystem
for inodes. The issue is caused by a nearly full allocation group
having enough free space in it to be considered for inode
allocation, but not enough contiguous free space to actually
allocation inodes.  This situation results in successful selection
of the AG for allocation, then failure of the allocation resulting
in ENOSPC being reported to the caller.

It is caused by two possible issues. Firstly, we only consider the
lognest free extent and whether it would fit an inode chunk. If the
extent is not correctly aligned, then we can't allocate an inode
chunk in it regardless of the fact that it is large enough. This
tends to be a permanent error until space in the AG is freed.

The second issue is that we don't actually lock the AGI or AGF when
we are doing these checks, and so by the time we get to actually
allocating the inode chunk the space we thought we had in the AG may
have been allocated. This tends to be a spurious error as it
requires a race to trigger. Hence this case is ignored in this patch
as the reported problem is for permanent errors.

The first issue could be addressed by simply taking into account the
alignment when checking the longest extent. This, however, would
prevent allocation in AGs that have aligned, exact sized extents
free. However, this case should be fairly rare compared to the
number of allocations that occur near ENOSPC that would trigger this
condition.

Hence, when selecting the inode AG, take into account the inode
cluster alignment when checking the lognest free extent in the AG.
If we can't find any AGs with a contiguous free space large
enough to be aligned, drop the alignment addition and just try for
an AG that has enough contiguous free space available for an inode
chunk. This won't prevent issues from occurring, but should avoid
situations where other AGs have lots of free space but the selected
AG can't allocate due to alignment constraints.

Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:42:21 +11:00
Peter Watkins
76b5730252 xfs: overflow in xfs_iomap_eof_align_last_fsb
If extsize is set and new_last_fsb is larger than 32 bits, the
roundup to extsize will overflow the align variable. Instead,
combine alignments by rounding stripe size up to extsize.

Signed-off-by: Peter Watkins <treestem@gmail.com>
Reviewed-by: Nathaniel W. Turner <nate@houseofnate.net>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-04 09:30:51 +11:00
Linus Torvalds
ebcd241a63 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c bugfixes from Wolfram Sang:
 "A few driver bugfixes for 3.18"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: omap: fix i207 errata handling
  i2c: designware: prevent early stop on TX FIFO empty
  i2c: omap: fix NACK and Arbitration Lost irq handling
2014-12-03 14:27:07 -08:00
Linus Torvalds
5dc626358f PCI update for v3.18:
NVIDIA Tegra
     - Use physical range for I/O mapping (Thierry Reding)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUf1W0AAoJEFmIoMA60/r8wIUP/iFJKucfHJUDo3i/R96vXYhv
 /PEosMwQu2FnfLC13vOnUnx9m2uv2gpthhI255guxm3DUIsurOcdBGR7ZoaQcMkD
 0NMf/UeGlKPFkXk5ltJiO4SHsAv8ITMV7pYcUl4DX0E288kBjM4LV69+aprKw7GY
 ULZDDqIE5x6SkmBv5PopTr7M+Z6omQ+nxZ6txMAM3ks2+rku6SzqPaWZFhpTinqn
 AJlx9gqjN8OLuPNXqHia+hBzPk9xvisCOZ0kOXpS3ipeXvyLVPThqhO1fG9RFY0a
 BXK+l8E7z3zcwIZIQMsVl3zuxYVpjQhgNlPqFyYE+TCW/kG6V3STWzmYW/kCT0ax
 ipVeSKXZnmcf7iKZ78UdW8bXZGHi6WNouaN0/NAtXh9Gln8P2qOuSBwv1H3374in
 NnIFPr8bFNXgSr8OPZWIqhwQEdPZgydxq28DxIEZCdYo4idP3Q+yElQPpmZzBeeC
 8rnFyHsBFdazr7W44jsPnn45Fdy2LEEo07v80buj/RwdwMV2zj2OFLUMT9Nlyu6k
 p7HLM40FZlyeu+OHjzc0zu/GjQ5CAt4SV0DSQ/Gi80Bq1X+qHPVc7u6MoKmS0wYr
 wZ2/DCXHloMRsITZ6fyPVNsUHB9S9M01V4VCnzCSeJ65ArvNeP5+7yzQKUIEKLQ9
 FclPrRsT+jaJUWVpNLjE
 =KWwE
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "This fixes a Tegra20 regression that we introduced during the v3.18
  merge window"

* tag 'pci-v3.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: tegra: Use physical range for I/O mapping
2014-12-03 14:24:10 -08:00