Commit graph

691,473 commits

Author SHA1 Message Date
Markus Elfring
11cc9f56a1 jbd: Deletion of an unnecessary check before the function call "iput"
The iput() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-18 10:15:29 +01:00
Neerav Parikh
3ffa037d7f i40e: Set XPS bit mask to zero in DCB mode
Due to DCBX configuration change if the VSI needs to use more than 1 TC;
it needs to disable the XPS maps that were set when operating in 1 TC mode.
Without disabling XPS the netdev layer will select queues based on those
settings and not use the TC queue mapping to make the queue selection.

This patch allows the driver to enable/disable the XPS based on the number
of TCs being enabled for the given VSI.

Change-ID: Idc4dec47a672d2a509f6d7fe11ed1ee65b4f0e08
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:09:35 -08:00
Neerav Parikh
4b7698cb95 i40e: Prevent link flow control settings when PFC is enabled
When PFC is enabled we should not proceed with setting the link flow control
parameters.  Also, always report the link flow Tx/Rx settings as off when
PFC is enabled.

Change-ID: Ib09ec58afdf0b2e587ac9d8851a5c80ad58206c4
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:09:27 -08:00
Neerav Parikh
d341b7a52b i40e: Do not disable/enable FCoE VSI with DCB reconfig
FCoE VSI Tx queue disable times out when reconfiguring as a result of
DCB TC configuration change event.

The hardware allows us to skip disabling and enabling of Tx queues for
VSIs with single TC enabled. As FCoE VSI is configured to have only
single TC we skip it from disable/enable flow.

Change-ID: Ia73ff3df8785ba2aa3db91e6f2c9005e61ebaec2
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:09:22 -08:00
Neerav Parikh
69129dc39f i40e: Modify Tx disable wait flow in case of DCB reconfiguration
When DCB TC configuration changes the firmware suspends the port's Tx.
Now, as DCB TCs may have changed the PF driver tries to reconfigure the
TC configuration of the VSIs it manages. As part of this process it disables
the VSI queues but the Tx queue disable will not complete as the port's
Tx has been suspended. So, waiting for Tx queues to go to disable state
in this flow may lead to detection of Tx queue disable timeout errors.

Hence, this patch adds a new PF state so that if a port's Tx is in
suspended state the Tx queue disable flow would just put the request for
the queue to be disabled and return without waiting for the queue to be
actually disabled.
Once the VSI(s) TC reconfiguration has been done and driver has called
firmware AQC "Resume PF Traffic" the driver checks the Tx queues requested
to be disabled are actually disabled before re-enabling them again.

Change-ID: If3e03ce4813a4e342dbd5a1eb1d2861e952b7544
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:09:17 -08:00
Neerav Parikh
23cd1f095a i40e: Update VEB's enabled_tc after reconfiguration
When the port TC configuration changes as a result of DCBx the driver
modifies the enabled TCs for the VEBs it manages. But, in the process
it did not update the enabled_tc value that it caches on a per VEB basis.

So, when the next reconfiguration event occurs where the number of TC
value is same as the value cached in enabled_tc for a given VEB; driver
does not modify it's TC configuration by calling appropriate AQ command
believing it is running with the same configuration as requested.
Now, as the VEB is not actually enabled for the TCs that are there any
TC configuration command for VSI attached to that VEB with TCs that are
not enabled for the VEB fails.

This patch fixes this issue.

Change-ID: Ife5694469b05494228e0d850429ea1734738cf29
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:09:09 -08:00
Neerav Parikh
e1c4751ee2 i40e: Check for LLDP AdminStatus before querying DCBX
This patch adds a check whether LLDP Agent's default AdminStatus is
enabled or disabled on a given port. If it is disabled then it sets
the DCBX status to disabled as well; and would not query firmware for
any DCBX configuration data.

Change-ID: I73c0b9f0adbf4cae177d14914b20a48c9a8f50fd
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:09:06 -08:00
Neerav Parikh
9fa61dd215 i40e: Add support to firmware CEE DCBX mode
This patch allows i40e driver to query and use DCB configuration from
firmware when firmware DCBX agent is in CEE mode.

Change-ID: I30f92a67eb890f0f024f35339696e6e83d49a274
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:09:02 -08:00
Neerav Parikh
2fd75f31f6 i40e: Resume Port Tx after DCB event
When there are DCB configuration changes based on DCBX the firmware suspends
the port's Tx and generates an event to the PF. The PF is then responsible
to reconfigure the PF VSIs and switching topology as per the updated DCB
configuration and then resume the port's Tx by calling the "Resume Port Tx"
AQ command.

This patch adds this call to the flow that handles DCB re-configuration in
the PF.

Change-ID: I5b860ad48abfbf379b003143c4d3453e2ed5cc1c
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:08:56 -08:00
Catherine Sullivan
7bda87c7fb i40e: Bump version to 1.1.23
Bumping minor version as this will be the second SW release and it
should be 1.

Change-ID: If0bd102095d2f059ae0c9b7f4ad625535ffbbdee
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:08:45 -08:00
Mitch Williams
c5c2f7c360 i40e: re-enable VFLR interrupt sooner
VF interrupt processing takes a looooong time, and it's possible that we
could lose a VFLR event if it happens while we're processing a VFLR on
another VF. This would leave the VF in a semi-permanent reset state,
which would not be cleared until yet another VF experiences a VFLR.

To correct this situation, we enable the VFLR interrupt cause before we
begin processing any pending resets. This means that any VFLR that
occurs during reset processing will generate another interrupt and this
routine will get called again.

This change may cause a spurious interrupt when multiple VFLRs occur
very close together in time. If this happens, then this routine will be
called again and it will detect no outstanding VFLR events and do
nothing. No harm, no foul.

Change-ID: Id0451f3e6e73a2cf6db1668296c71e129b59dc19
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:08:33 -08:00
Shannon Nelson
e684fa34c3 i40e: only warn once of PTP nonsupport in 100Mbit speed
Only warn once that PTP is not supported when linked at 100Mbit.

Yes, using a static this way means that this once-only message is not
port specific, but once only for the life of the driver, regardless of
the number of ports.  That should be plenty.

Change-ID: Ie6476530056df408452e195ef06afd4f57caa4b2
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-18 01:08:23 -08:00
Johannes Berg
760a52e80f Merge remote-tracking branch 'wireless-next/master' into mac80211-next
This brings in some mwifiex changes that further patches will
need to work on top to not cause merge conflicts.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-18 09:32:44 +01:00
Jesse Barnes
cbc572a9a5 drm/i915/ddi: add break in DDI mode select switch
The lack of a break here wasn't for falling through to some other
important code, so made me do a double take.  Add a break just to make
things a little less confusing.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-18 09:14:32 +01:00
Daniel Vetter
70b0ea8656 drm/i915: Drop return value from lrc_setup_hardware_status_page
kmap never fails.

Spotted-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-11-18 09:09:32 +01:00
Tejun Heo
eeecbd1971 cgroup: implement cgroup_get_e_css()
Implement cgroup_get_e_css() which finds and gets the effective css
for the specified cgroup and subsystem combination.  This function
always returns a valid pinned css.  This will be used by cgroup
writeback support.

While at it, add comment to cgroup_e_css() to explain why that
function is different from cgroup_get_e_css() and has to test
cgrp->child_subsys_mask instead of cgroup_css(cgrp, ss).

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2014-11-18 02:49:52 -05:00
Tejun Heo
56c807ba4e cgroup: add cgroup_subsys->css_e_css_changed()
Add a new cgroup_subsys operatoin ->css_e_css_changed().  This is
invoked if any of the effective csses seen from the css's cgroup may
have changed.  This will be used to implement cgroup writeback
support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2014-11-18 02:49:51 -05:00
Tejun Heo
7d172cc89b cgroup: add cgroup_subsys->css_released()
Add a new cgroup subsys callback css_released().  This is called when
the reference count of the css (cgroup_subsys_state) reaches zero
before RCU scheduling free.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2014-11-18 02:49:51 -05:00
Tejun Heo
db6e305345 cgroup: fix the async css offline wait logic in cgroup_subtree_control_write()
When a subsystem is offlined, its entry on @cgrp->subsys[] is cleared
asynchronously.  If cgroup_subtree_control_write() is requested to
enable the subsystem again before the entry is cleared, it has to wait
for the previous offlining to finish and clear the @cgrp->subsys[]
entry before trying to enable the subsystem again.

This is currently done while verifying the input enable / disable
parameters.  This used to be correct but f63070d350 ("cgroup: make
interface files visible iff enabled on cgroup->subtree_control")
breaks it.  The commit is one of the commits implementing subsystem
dependency.

Through subsystem dependency, some subsystems may be enabled and
disabled implicitly in addition to the explicitly requested ones.  The
actual subsystems to be enabled and disabled are determined during
@css_enable/disable calculation.  The current offline wait logic skips
the ones which are already implicitly enabled and then waits for
subsystems in @enable; however, this misses the subsystems which may
be implicitly enabled through dependency from @enable.  If such
implicitly subsystem hasn't yet finished offlining yet, the function
ends up trying to create a css when its @cgrp->subsys[] slot is
already occupied triggering BUG_ON() in init_and_link_css().

Fix it by moving the wait logic after @css_enable is calculated and
waiting for all the subsystems in @css_enable.  This fixes the above
bug as the mask contains all subsystems which are to be enabled
including the ones enabled through dependencies.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: f63070d350 ("cgroup: make interface files visible iff enabled on cgroup->subtree_control")
Acked-by: Zefan Li <lizefan@huawei.com>
2014-11-18 02:49:51 -05:00
Tejun Heo
755bf5ee86 cgroup: restructure child_subsys_mask handling in cgroup_subtree_control_write()
Make cgroup_subtree_control_write() first calculate new
subtree_control (new_sc), child_subsys_mask (new_ss) and
css_enable/disable masks before applying them to the cgroup.  Also,
store the original subtree_control (old_sc) and child_subsys_mask
(old_ss) and use them to restore the orignal state after failure.

This patch shouldn't cause any behavior changes.  This prepares for a
fix for a bug in the async css offline wait logic.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2014-11-18 02:49:50 -05:00
Tejun Heo
0f060deb5c cgroup: separate out cgroup_calc_child_subsys_mask() from cgroup_refresh_child_subsys_mask()
cgroup_refresh_child_subsys_mask() calculates and updates the
effective @cgrp->child_subsys_maks according to the current
@cgrp->subtree_control.  Separate out the calculation part into
cgroup_calc_child_subsys_mask().  This will be used to fix a bug in
the async css offline wait logic.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
2014-11-18 02:49:50 -05:00
Fabio K
a86c02ea38 Bluetooth: Add support for Broadcom BCM20702A1 variant
This variant requires the flag BTUSB_BCM_PATCHRAM to work.

Relevant details from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3404 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=240A646F1XXX
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

The firmware was extracted from a Windows 8.1 64-bit installation
and converted from 'hex' to 'hcd' for use in Linux.

Under Windows it also identifies itself as BCM20702A0,
but the firmware is named "BCM20702A1_001.002.014.1315.1356.hex"
and is located in "%SYSTEMROOT%\system32\drivers\"
(md5 67cf6bfdae61c4bb819a66da984f7913)
(sha1 5f74cc6a9a3bf19ee0f8c3d01e4be34c609b188f)

The same firmware file is also available as a download at
http://www.asrock.com/mb/Intel/Z87E-ITX/?cat=Download&os=All
marked as "Bluetooth driver ver:12.0.0.7820"

'hcd' file should be placed at "brcm/BCM20702A0-13d3-3404.hcd"
inside the firmware directory (e.g. "/lib/firmware")

Signed-off-by: Fabio K <healthkit@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-18 08:32:14 +01:00
Johan Hedberg
76727c02c1 Bluetooth: Call drain_workqueue() before resetting state
Doing things like hci_conn_hash_flush() while holding the hdev lock is
risky since its synchronous pending work cancellation could cause the
L2CAP layer to try to reacquire the hdev lock. Right now there doesn't
seem to be any obvious places where this would for certain happen but
it's already enough to cause lockdep to start warning against the hdev
and the work struct locks being taken in the "wrong" order:

[  +0.000373] mgmt-tester/1603 is trying to acquire lock:
[  +0.000292]  ((&conn->pending_rx_work)){+.+.+.}, at: [<c104266d>] flush_work+0x0/0x181
[  +0.000270]
but task is already holding lock:
[  +0.000000]  (&hdev->lock){+.+.+.}, at: [<c13b9a80>] hci_dev_do_close+0x166/0x359
[  +0.000000]
which lock already depends on the new lock.

[  +0.000000]
the existing dependency chain (in reverse order) is:
[  +0.000000]
-> #1 (&hdev->lock){+.+.+.}:
[  +0.000000]        [<c105ea8f>] lock_acquire+0xe3/0x156
[  +0.000000]        [<c140c663>] mutex_lock_nested+0x54/0x375
[  +0.000000]        [<c13d644b>] l2cap_recv_frame+0x293/0x1a9c
[  +0.000000]        [<c13d7ca4>] process_pending_rx+0x50/0x5e
[  +0.000000]        [<c1041a3f>] process_one_work+0x21c/0x436
[  +0.000000]        [<c1041e3d>] worker_thread+0x1be/0x251
[  +0.000000]        [<c1045a22>] kthread+0x94/0x99
[  +0.000000]        [<c140f801>] ret_from_kernel_thread+0x21/0x30
[  +0.000000]
-> #0 ((&conn->pending_rx_work)){+.+.+.}:
[  +0.000000]        [<c105e158>] __lock_acquire+0xa07/0xc89
[  +0.000000]        [<c105ea8f>] lock_acquire+0xe3/0x156
[  +0.000000]        [<c1042696>] flush_work+0x29/0x181
[  +0.000000]        [<c1042864>] __cancel_work_timer+0x76/0x8f
[  +0.000000]        [<c104288c>] cancel_work_sync+0xf/0x11
[  +0.000000]        [<c13d4c18>] l2cap_conn_del+0x72/0x183
[  +0.000000]        [<c13d8953>] l2cap_disconn_cfm+0x49/0x55
[  +0.000000]        [<c13be37a>] hci_conn_hash_flush+0x7a/0xc3
[  +0.000000]        [<c13b9af6>] hci_dev_do_close+0x1dc/0x359
[  +0.012038]        [<c13bbe38>] hci_unregister_dev+0x6e/0x1a3
[  +0.000000]        [<c12d33c1>] vhci_release+0x28/0x47
[  +0.000000]        [<c10dd6a9>] __fput+0xd6/0x154
[  +0.000000]        [<c10dd757>] ____fput+0xd/0xf
[  +0.000000]        [<c1044bb2>] task_work_run+0x6b/0x8d
[  +0.000000]        [<c1001bd2>] do_notify_resume+0x3c/0x3f
[  +0.000000]        [<c140fa70>] work_notifysig+0x29/0x31
[  +0.000000]
other info that might help us debug this:

[  +0.000000]  Possible unsafe locking scenario:

[  +0.000000]        CPU0                    CPU1
[  +0.000000]        ----                    ----
[  +0.000000]   lock(&hdev->lock);
[  +0.000000]                                lock((&conn->pending_rx_work));
[  +0.000000]                                lock(&hdev->lock);
[  +0.000000]   lock((&conn->pending_rx_work));
[  +0.000000]
 *** DEADLOCK ***

Fully fixing this would require some quite heavy refactoring to change
how the hdev lock and hci_conn instances are handled together. A simpler
solution for now which this patch takes is to try ensure that the hdev
workqueue is empty before proceeding with the various cleanup calls,
including hci_conn_hash_flush().

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-18 08:32:08 +01:00
Michael Ellerman
35891d40bf Merge remote-tracking branch 'scottwood/next' into next
Scott says:

"Highlights include a bunch of 8xx optimizations, device tree bindings
for Freescale BMan, QMan, and FMan datapath components, misc device tree
updates, and inbound rio window support."
2014-11-18 17:00:38 +11:00
Dmitry Kasatkin
6fb5032ebb VFS: refactor vfs_read()
integrity_kernel_read() duplicates the file read operations code
in vfs_read(). This patch refactors vfs_read() code creating a
helper function __vfs_read(). It is used by both vfs_read() and
integrity_kernel_read().

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:14:22 -05:00
Dmitry Kasatkin
c57782c13e ima: require signature based appraisal
This patch provides CONFIG_IMA_APPRAISE_SIGNED_INIT kernel configuration
option to force IMA appraisal using signatures. This is useful, when EVM
key is not initialized yet and we want securely initialize integrity or
any other functionality.

It forces embedded policy to require signature. Signed initialization
script can initialize EVM key, update the IMA policy and change further
requirement of everything to be signed.

Changes in v3:
* kernel parameter fixed to configuration option in the patch description

Changes in v2:
* policy change of this patch separated from the key loading patch

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:12:01 -05:00
Dmitry Kasatkin
c9cd2ce2bc integrity: provide a hook to load keys when rootfs is ready
Keys can only be loaded once the rootfs is mounted. Initcalls
are not suitable for that. This patch defines a special hook
to load the x509 public keys onto the IMA keyring, before
attempting to access any file. The keys are required for
verifying the file's signature. The hook is called after the
root filesystem is mounted and before the kernel calls 'init'.

Changes in v3:
* added more explanation to the patch description (Mimi)

Changes in v2:
* Hook renamed as 'integrity_load_keys()' to handle both IMA and EVM
  keys by integrity subsystem.
* Hook patch moved after defining loading functions

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:12:01 -05:00
Dmitry Kasatkin
fd5f4e9054 ima: load x509 certificate from the kernel
Define configuration option to load X509 certificate into the
IMA trusted kernel keyring. It implements ima_load_x509() hook
to load X509 certificate into the .ima trusted kernel keyring
from the root filesystem.

Changes in v3:
* use ima_policy_flag in ima_get_action()
  ima_load_x509 temporarily clears ima_policy_flag to disable
  appraisal to load key. Use it to skip appraisal rules.
* Key directory path changed to /etc/keys (Mimi)
* Expand IMA_LOAD_X509 Kconfig help

Changes in v2:
* added '__init'
* use ima_policy_flag to disable appraisal to load keys

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:12:00 -05:00
Dmitry Kasatkin
65d543b233 integrity: provide a function to load x509 certificate from the kernel
Provide the function to load x509 certificates from the kernel into the
integrity kernel keyring.

Changes in v2:
* configuration option removed
* function declared as '__init'

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:11:59 -05:00
Dmitry Kasatkin
e3c4abbfa9 integrity: define a new function integrity_read_file()
This patch defines a new function called integrity_read_file()
to read file from the kernel into a buffer. Subsequent patches
will read a file containing the public keys and load them onto
the IMA keyring.

This patch moves and renames ima_kernel_read(), the non-security
checking version of kernel_read(), to integrity_kernel_read().

Changes in v3:
* Patch descriptions improved (Mimi)
* Add missing cast (kbuild test robot)

Changes in v2:
* configuration option removed
* function declared as '__init'

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:09:18 -05:00
Kevin Hao
d7ce437749 powerpc/fsl_msi: mark the msi cascade handler IRQF_NO_THREAD
The commit 543c043cba ("powerpc/fsl_msi: change the irq handler from
chained to normal") changes the msi cascade handler from chained to
normal. Since cascade handler must run in hard interrupt context, this
will cause kernel panic if we force threading of all the interrupt
handler via kernel command parameter 'threadirqs'. So mark the irq
handler IRQF_NO_THREAD explicitly.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-17 22:00:30 -06:00
Michael Neuling
80fa93fce3 cxl: Name interrupts in /proc/interrupt
Currently all interrupts generated by cxl are named "cxl".  This is not very
informative as we can't distinguish between cards, AFUs, error interrupts, user
contexts and user interrupts numbers.  Being able to distinguish them is useful
for setting affinity.

This patch gives each of these names in /proc/interrupts.

A two card CAPI system, with afu0.0 having 2 active contexts each with 4 user
IRQs each, will now look like this:

    % grep cxl /proc/interrupts
    444:          0  OPAL ICS 141312 Level     cxl-card1-err
    445:          0  OPAL ICS 141313 Level     cxl-afu1.0-err
    446:          0  OPAL ICS 141314 Level     cxl-afu1.0
    462:          0  OPAL ICS 2052 Level     cxl-afu0.0-pe0-1
    463:      75517  OPAL ICS 2053 Level     cxl-afu0.0-pe0-2
    468:          0  OPAL ICS 2054 Level     cxl-afu0.0-pe0-3
    469:          0  OPAL ICS 2055 Level     cxl-afu0.0-pe0-4
    470:          0  OPAL ICS 2056 Level     cxl-afu0.0-pe1-1
    471:      75506  OPAL ICS 2057 Level     cxl-afu0.0-pe1-2
    472:          0  OPAL ICS 2058 Level     cxl-afu0.0-pe1-3
    473:          0  OPAL ICS 2059 Level     cxl-afu0.0-pe1-4
    502:       1066  OPAL ICS 2050 Level     cxl-afu0.0
    514:          0  OPAL ICS 2048 Level     cxl-card0-err
    515:          0  OPAL ICS 2049 Level     cxl-afu0.0-err

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-18 13:01:39 +11:00
Ian Munsie
bc78b05bb4 cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.

The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.

It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.

This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.

It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-18 12:58:38 +11:00
Pankaj Dubey
7d3dcd042c PM: Kconfig: fix unmet dependency for CPU_PM
If BL_SWITCHER is enabled but SUSPEND and CPU_IDLE is not enabled
we are getting following config warning.

warning: (BL_SWITCHER) selects CPU_PM which has unmet direct
dependencies (SUSPEND || CPU_IDLE)

It has been noticed that CPU_PM dependencies in this file are not really
required so let's remove these dependencies from CPU_PM.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18 02:51:17 +01:00
Markus Elfring
6c45de0d51 PM / hibernate: Deletion of an unnecessary check before the function call "vfree"
The vfree() function performs also input parameter validation. Thus the test
around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18 02:49:40 +01:00
Viresh Kumar
f41f4815f8 cpufreq: Kconfig: Remove architecture specific menu entries
CPUFreq driver's Kconfig entries are added in Kconfig.<arch> files and they are
all included from the main Kconfig file using a menu entry. This creates another
level of (unnecessary) hierarchy within the menuconfig entries.

The problem occurs when there are drivers usable across architectures. Either
their config entry is duplicated in all the supported architectures or is put
into the main Kconfig entry. With the later one, we have menuconfig entries for
drivers at two levels then.

Fix these issues by getting rid of another level of menuconfig hierarchy and
populate all drivers within the main cpufreq menu. To clearly distinguish where
the drivers start from, also add a comment that will appear in menuconfig.

Reported-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18 02:47:42 +01:00
Prabhakar Kushwaha
76f3e2929b powerpc/config: Enable memory driver
As Freescale IFC controller has been moved to driver to driver/memory.

So enable memory driver in powerpc config

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-17 19:36:42 -06:00
Alex Elder
374e6a269c greybus: kill off the last of gbuf.c
Only three functions remain in "gbuf.c".  Move one of them into
"connection.c" and the other two into "operation.c".

Some more cleanup is coming that will further straighten out gbufs
but for now there's no sense in drawing this out any longer.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
4e5007e5c2 greybus: kill the gbuf slab cache
Nobody dynamically allocates gbufs any more, so we can get rid of
the allocation and free routines, as as the slab cache and its
related code.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
bc46fabccd greybus: embed gbufs into operation message structure
Embed the gbuf structures for operation messages into the message
structure rather than pointing to a dynamically allocated one.

Use a null gbuf->transfer_buffer pointer rather than a null gbuf
pointer to indicate an unused gbuf.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
f7935e333a greybus: use null gbuf->transfer_buffer
Make sure gbuf->transfer_buffer gets reset to NULL when the buffer
is freed.  We can leverage that to do a little extra error checking.
We'll also use a null transfer buffer in the next patch to indicate
an unused gbuf.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
bb88896eaf greybus: move gbuf initialization to caller
Change greybus_alloc_gbuf() so all it does is allocate the gbuf data
structure.  Move all of the initialization of the gbuf structure in
the caller.  Do the inverse in the caller prior to freeing the gbuf
structure via greybus_free_gbuf().  Use a null gbuf->transfer_buffer
pointer rather than a null gbuf pointer to indicate an unused gbuf.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
c7f82d5dc0 greybus: start using struct gb_message
This converts some of the operation code to start leveraging the
new gb_message type.  Instead of creating the request and response
gbufs, we initialize (and tear down with a new function) the
request and response message structures.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
3690a826fa greybus: define struct gb_message
A Greybus buffer (gbuf) is a generic buffer used for data transfer
over a Greybus interconnect.  We only ever use gbufs in operations,
which always involve exactly two of them.  The lifetime of a gbuf is
therefore directly connected to the lifetime of an operation, so
there no real need to manage gbufs separate from operations.

This patch begins the process of removing the gbuf abstraction, on
favor of a new data type, gb_message.  The purpose of a gb_message
is--like a gbuf--to represent data to be transferred over Greybus.
However a gb_message is oriented toward the more restrictive way
we do Greybus transfers--as operation messages (either a request or
a response).

This patch simply defines the structure in its initial form, and
defines the request and response fields in a Greybus operation
structure as embedded instances of that type.  The gbuf pointer
is defined within the gb_message structure, and as a result lots
of code needs to be tweaked to reference the request and response
gbufs as subfields of the request and response structures.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
3c3cef400e greybus: move the definition of struct gbuf
We no longer need struct gbuf defined in "greybus.h".  An upcoming
patch will embed a gbuf struct (not a pointer) into the operation
structure, and to do that we'll need the struct defined prior to the
operation.  Just move the gbuf definition into "operation.h".

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
2f528c8bf7 greybus: kill gbuf->kref
Since there is only ever one reference to a gbuf, we don't need a
kref to figure out when it can be freed.  Get rid of the kref and
its supporting code.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Alex Elder
6e5dd0bbbb greybus: kill greybus_{get,put}_gbuf()
These functions are never used, so we can get rid of them.
Since there's no reference-getting function any more, we no
longer need "gbuf_mutex" to avoid racing gets and puts, so
get rid of that too.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:19:20 -08:00
Greg Kroah-Hartman
396671b139 greybus: vibrator-gb: proper allocate minor numbers
Change the driver to allocate minors in a proper manner, using the idr
interface.

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-11-17 17:12:50 -08:00
Dave Hansen
abe1e395f6 fs: Do not include mpx.h in exec.c
We no longer need mpx.h in exec.c.  This will obviously also
break the build for non-x86 builds.  We get the MPX includes that
we need from mmu_context.h now.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20141118003608.837015B3@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-18 02:01:40 +01:00
Fabian Frederick
d93de3455d ACPI: remove unnecessary sizeof(u8)
sizeof(u8) is always 1.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-18 02:01:27 +01:00