Commit graph

691,473 commits

Author SHA1 Message Date
Liam Girdwood
b891f62fcd ASoC: Intel: Add debug output when boot fails.
Add the debug output from IPCD and IPCX when booting fails.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-30 15:46:05 +00:00
Marcelo Leitner
8ac2bde2a4 netfilter: log: protect nf_log_register against double registering
Currently, despite the comment right before the function,
nf_log_register allows registering two loggers on with the same type and
end up overwriting the previous register.

Not a real issue today as current tree doesn't have two loggers for the
same type but it's better to get this protected.

Also make sure that all of its callers do error checking.

Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-10-30 16:41:48 +01:00
Alexandre Courbot
2071d0968e Documentation: gpio: guidelines for bindings
Now that ACPI supports named GPIO properties, either through ACPI 5.1 or
the per-driver ACPI GPIO mappings, we can be more narrow about the way
GPIOs should be specified in Device Tree bindings.

This patch updates the GPIO DT bindings documentation to highlight the
following rules for new GPIO bindings:

- All new bindings must have a meaningful name (e.g. the "gpios"
  property must not be used)
- The only suffix allowed is "-gpios", no matter the number of
  descriptors in the property
- GPIOs can only be grouped under the same property when they serve the
  same purpose, a case that should remain exceptional (e.g. bit-banged
  data lines).

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-30 16:41:47 +01:00
Marcelo Leitner
0c26ed1c07 netfilter: nf_log: Introduce nft_log_dereference() macro
Wrap up a common call pattern in an easier to handle call.

Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-10-30 16:39:40 +01:00
Maxime Ripard
888366fa17 ARM: sun9i: optimus: Set UART0 muxing
Enable the UART0 muxing, as set up by the bootloader.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-30 16:36:49 +01:00
Maxime Ripard
43d024d36a ARM: sun9i: Enable the A80 pinctrl driver
The A80 pinctrl driver is just as usual our pinctrl/gpio/external interrupt
controller.

Nothing really out of the extraordinary here...

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-30 16:36:45 +01:00
Tony Lindgren
e2c5eb78a3 ARM: dts: Fix wrong GPMC size mappings for omaps
The GPMC binding is obviously very confusing as the values
are all over the place. People seem to confuse the GPMC partition
size for the chip select, and the device IO size within the GPMC
partition easily.

The ranges entry contains the GPMC partition size. And the
reg entry contains the size of the IO registers of the
device connected to the GPMC.

Let's fix the issue according to the following table:

Device          GPMC partition size     Device IO size
connected       in the ranges entry     in the reg entry

NAND            0x01000000 (16MB)       4
16550           0x01000000 (16MB)       8
smc91x          0x01000000 (16MB)       0xf
smc911x         0x01000000 (16MB)       0xff
OneNAND         0x01000000 (16MB)       0x20000 (128KB)
16MB NOR        0x01000000 (16MB)       0x01000000 (16MB)
32MB NOR        0x02000000 (32MB)       0x02000000 (32MB)
64MB NOR        0x04000000 (64MB)       0x04000000 (64MB)
128MB NOR       0x08000000 (128MB)      0x08000000 (128MB)
256MB NOR       0x10000000 (256MB)      0x10000000 (256MB)

Let's also add comments to the fixed entries while at it.

Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-30 08:35:17 -07:00
Roger Quadros
8bf9be566e ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe
This prevents potential division by zero errors
if GPMC fck turns out to be zero due to faulty clock
data.

Use resource managed clk_get() API.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2014-10-30 17:21:55 +02:00
Roger Quadros
4cf27d2ec7 ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it
As per the OMAP reference manual [1], the Chip Select must be
disabled (i.e. CSVALID is 0) while configuring any of the
Chip select parameters.

[1] - 10.1.5.1 Chip-Select Base Address and Region Size Configuration
http://www.ti.com/lit/pdf/swpu177

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2014-10-30 17:21:46 +02:00
Roger Quadros
e378d22b9c ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices
Although RESET state of LIMITEDADDRESS bit in GPMC_CONFIG register
is 0 (i.e. A26-A11 enabled), faulty bootloaders might accidentally
set this bit. e.g. u-boot 2014.07 with CONFIG_NOR disabled.

Explicity disable LIMITEDADDRESS bit for non NAND devices so that
they can always work.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2014-10-30 17:21:08 +02:00
Roger Quadros
7604baf365 ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child()
gpmc_cs_set_timings() returns non-zero if there was
an error while setting the GPMC timings. e.g. Timing was too
large to be accomodated with current GPMC clock frequency and available
timing range. Fail in this case, else we risk operating a NOR device
with non compliant timings.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2014-10-30 17:20:58 +02:00
Roger Quadros
80323742ea ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg()
Simplify set_gpmc_timing_reg() and always print error message
if the requested timing cannot be achieved due to a too fast
GPMC functional clock, irrespective if whether DEBUG is defined
or not. This should help us debug timing configuration issues,
which were otherwise simply not being displayed in the kernel log.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2014-10-30 17:20:18 +02:00
Lad, Prabhakar
cc040ba269 MAINTAINERS: drop list entry for davinci
As davinci-linux-open-source@linux.davincidsp.com is now
shut and no more maintained by TI, drop this entry from
DAVINCI MACHINE SUPPORT and DAVINCI SERIES MEDIA DRIVER.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: arm@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-10-30 08:12:25 -07:00
Daniel Thompson
bd1dbc3b9d gpio: msm-v1: Fix typo in function argument
irq_set_irq_wake() treats its second argument as a boolean. It is much
easier to read code when constant booleans are either 0 or 1!

This particular line of code distracted me somewhat when I was doing a bit of
work in a code browser since it (spuriously) got me worried that I had
misunderstood how irq_set_irq_wake() worked.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-30 15:59:51 +01:00
Maxime Ripard
d5e9fb31ba pinctrl: sunxi: Add A80 pinctrl muxing options
The A80 has a rather usual pin controller, the only thing out of the ordinary
being that it has 5 interrupts banks, and that some pins have several options
for the same functions.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-30 15:56:16 +01:00
Maxime Ripard
4f6bd5cfc6 pinctrl: sunxi: Add PN bank base pin
The A80 R-PIO controller has one more bank that what we've seen so far, add the
PN pin bank.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-30 15:55:26 +01:00
Jan Kara
ae9e9c6aee ext4: make ext4_ext_convert_to_initialized() return proper number of blocks
ext4_ext_convert_to_initialized() can return more blocks than are
actually allocated from map->m_lblk in case where initial part of the
on-disk extent is zeroed out. Luckily this doesn't have serious
consequences because the caller currently uses the return value
only to unmap metadata buffers. Anyway this is a data
corruption/exposure problem waiting to happen so fix it.

Coverity-id: 1226848
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30 10:53:17 -04:00
Jan Kara
4f879ca687 ext4: bail early when clearing inode journal flag fails
When clearing inode journal flag, we call jbd2_journal_flush() to force
all the journalled data to their final locations. Currently we ignore
when this fails and continue clearing inode journal flag. This isn't a
big problem because when jbd2_journal_flush() fails, journal is likely
aborted anyway. But it can still lead to somewhat confusing results so
rather bail out early.

Coverity-id: 989044
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30 10:53:17 -04:00
Jan Kara
6050d47adc ext4: bail out from make_indexed_dir() on first error
When ext4_handle_dirty_dx_node() or ext4_handle_dirty_dirent_node()
fail, there's really something wrong with the fs and there's no point in
continuing further. Just return error from make_indexed_dir() in that
case. Also initialize frames array so that if we return early due to
error, dx_release() doesn't try to dereference uninitialized memory
(which could happen also due to error in do_split()).

Coverity-id: 741300
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-30 10:53:17 -04:00
Theodore Ts'o
d48458d4a7 jbd2: use a better hash function for the revoke table
The old hash function didn't work well for 64-bit block numbers, and
used undefined (negative) shift right behavior.  Use the generic
64-bit hash function instead.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com>
2014-10-30 10:53:17 -04:00
Dmitry Monakhov
a41537e69b ext4: prevent bugon on race between write/fcntl
O_DIRECT flags can be toggeled via fcntl(F_SETFL). But this value checked
twice inside ext4_file_write_iter() and __generic_file_write() which
result in BUG_ON inside ext4_direct_IO.

Let's initialize iocb->private unconditionally.

TESTCASE: xfstest:generic/036  https://patchwork.ozlabs.org/patch/402445/

#TYPICAL STACK TRACE:
kernel BUG at fs/ext4/inode.c:2960!
invalid opcode: 0000 [#1] SMP
Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod
CPU: 6 PID: 5505 Comm: aio-dio-fcntl-r Not tainted 3.17.0-rc2-00176-gff5c017 #161
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011
task: ffff88080e95a7c0 ti: ffff88080f908000 task.ti: ffff88080f908000
RIP: 0010:[<ffffffff811fabf2>]  [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0
RSP: 0018:ffff88080f90bb58  EFLAGS: 00010246
RAX: 0000000000000400 RBX: ffff88080fdb2a28 RCX: 00000000a802c818
RDX: 0000040000080000 RSI: ffff88080d8aeb80 RDI: 0000000000000001
RBP: ffff88080f90bbc8 R08: 0000000000000000 R09: 0000000000001581
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88080d8aeb80
R13: ffff88080f90bbf8 R14: ffff88080fdb28c8 R15: ffff88080fdb2a28
FS:  00007f23b2055700(0000) GS:ffff880818400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f23b2045000 CR3: 000000080cedf000 CR4: 00000000000407e0
Stack:
 ffff88080f90bb98 0000000000000000 7ffffffffffffffe ffff88080fdb2c30
 0000000000000200 0000000000000200 0000000000000001 0000000000000200
 ffff88080f90bbc8 ffff88080fdb2c30 ffff88080f90be08 0000000000000200
Call Trace:
 [<ffffffff8112ca9d>] generic_file_direct_write+0xed/0x180
 [<ffffffff8112f2b2>] __generic_file_write_iter+0x222/0x370
 [<ffffffff811f495b>] ext4_file_write_iter+0x34b/0x400
 [<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410
 [<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410
 [<ffffffff810990e5>] ? local_clock+0x25/0x30
 [<ffffffff810abd94>] ? __lock_acquire+0x274/0x700
 [<ffffffff811f4610>] ? ext4_unwritten_wait+0xb0/0xb0
 [<ffffffff811bd756>] aio_run_iocb+0x286/0x410
 [<ffffffff810990e5>] ? local_clock+0x25/0x30
 [<ffffffff810ac359>] ? lock_release_holdtime+0x29/0x190
 [<ffffffff811bc05b>] ? lookup_ioctx+0x4b/0xf0
 [<ffffffff811bde3b>] do_io_submit+0x55b/0x740
 [<ffffffff811bdcaa>] ? do_io_submit+0x3ca/0x740
 [<ffffffff811be030>] SyS_io_submit+0x10/0x20
 [<ffffffff815ce192>] system_call_fastpath+0x16/0x1b
Code: 01 48 8b 80 f0 01 00 00 48 8b 18 49 8b 45 10 0f 85 f1 01 00 00 48 03 45 c8 48 3b 43 48 0f 8f e3 01 00 00 49 83 7c
24 18 00 75 04 <0f> 0b eb fe f0 ff 83 ec 01 00 00 49 8b 44 24 18 8b 00 85 c0 89
RIP  [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0
 RSP <ffff88080f90bb58>

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
2014-10-30 10:53:16 -04:00
Darrick J. Wong
50460fe8c6 ext4: remove extent status procfs files if journal load fails
If we can't load the journal, remove the procfs files for the extent
status information file to avoid leaking resources.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-30 10:53:16 -04:00
Darrick J. Wong
6b992ff256 ext4: disallow changing journal_csum option during remount
ext4 does not permit changing the metadata or journal checksum feature
flag while mounted.  Until we decide to support that, don't allow a
remount to change the journal_csum flag (right now we silently fail to
change anything).

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30 10:53:16 -04:00
Darrick J. Wong
98c1a7593f ext4: enable journal checksum when metadata checksum feature enabled
If metadata checksumming is turned on for the FS, we need to tell the
journal to use checksumming too.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-30 10:53:16 -04:00
Jan Kara
599a9b77ab ext4: fix oops when loading block bitmap failed
When we fail to load block bitmap in __ext4_new_inode() we will
dereference NULL pointer in ext4_journal_get_write_access(). So check
for error from ext4_read_block_bitmap().

Coverity-id: 989065
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30 10:53:16 -04:00
Jan Kara
9378c6768e ext4: fix overflow when updating superblock backups after resize
When there are no meta block groups update_backups() will compute the
backup block in 32-bit arithmetics thus possibly overflowing the block
number and corrupting the filesystem. OTOH filesystems without meta
block groups larger than 16 TB should be rare. Fix the problem by doing
the counting in 64-bit arithmetics.

Coverity-id: 741252
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2014-10-30 10:52:57 -04:00
Uwe Kleine-König
fdaaf6d660 pinctrl: mxs: warn if functions are not grouped by name
The mxs pinctrl driver cannot handle when functions are not grouped by
name (which IMO is a bug). This happens for example if a
imx28-somemachine.dts provides a function that has the same name as a
function defined in imx28.dtsi.

The proper way to fix that would be to check for duplicates in the loops
(which increases parsing time) or parse the groups first and sort the
resulting array.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-30 15:52:39 +01:00
Johannes Berg
46238845bd mac80211: properly flush delayed scan work on interface removal
When an interface is deleted, an ongoing hardware scan is canceled and
the driver must abort the scan, at the very least reporting completion
while the interface is removed.

However, if it scheduled the work that might only run after everything
is said and done, which leads to cfg80211 warning that the scan isn't
reported as finished yet; this is no fault of the driver, it already
did, but mac80211 hasn't processed it.

To fix this situation, flush the delayed work when the interface being
removed is the one that was executing the scan.

Cc: stable@vger.kernel.org
Reported-by: Sujith Manoharan <sujith@msujith.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-30 15:48:32 +01:00
Takashi Iwai
67faa6ebd7 ALSA: doc: Fix missing "I" for kerneldoc inclusion
Fixes: 90446d0746 ('ALSA: doc: Add missing headers and compress stuff to alsa-driver-api.tmpl')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 15:42:33 +01:00
Takashi Iwai
eb9c38d54c ALSA: doc: More kerneldoc comments on core components
Some functions missed the proper kerneldoc comments.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 15:42:32 +01:00
Takashi Iwai
85926e0fe8 ALSA: pcm: Convert params_*() with static inline functions
... and add proper kerneldoc comments.
There is no big reason to keep them as macros.  Static inline
functions are safer in general, and suitable for kerneldoc, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 15:42:32 +01:00
Takashi Iwai
30b771cf8c ALSA: pcm: More kerneldoc updates
Add proper kerneldoc comments to the exported functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 15:42:27 +01:00
Jani Nikula
7809a61176 drm/i915/dp: only use training pattern 3 on platforms that support it
Ivybridge + 30" monitor prints a drm error on every modeset, since IVB
doesn't support DP3 we should even bother trying to use it.

This regression has been introduced in

commit 06ea66b6bb
Author: Todd Previte <tprevite@gmail.com>
Date:   Mon Jan 20 10:19:39 2014 -0700

    drm/i915: Enable 5.4Ghz (HBR2) link rate for Displayport 1.2-capable
devices

Reported-by: Dave Airlie <airlied@redhat.com>
Reference: http://mid.gmane.org/1414566170-9868-1-git-send-email-airlied@gmail.com
Cc: Todd Previte <tprevite@gmail.com>
Cc: stable@vger.kernel.org (3.15+)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-10-30 15:51:11 +02:00
Olli Salonen
24e774092f [media] cx23855: add CI support for DVBSky T980C
Add CI support for DVBSky T980C card. The new host device independent CIMaX SP2 I2C driver was used to implement it.

IRQ handling is not implemented at this point. It could be used to detect the CAM insertion/removal instantly.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 11:50:49 -02:00
Olli Salonen
e450de45f4 [media] cx23885: add I2C client for CI into state and handle unregistering
If the CI chip has an I2C driver, we need to store I2C client into state.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 11:48:39 -02:00
Olli Salonen
b1cb7ad2d2 [media] sp2: improve debug logging
Improve debugging output.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 11:47:21 -02:00
Olli Salonen
9a25d410bb [media] sp2: fix incorrect struct
Incorrect struct used in the SP2 driver.

Reported-by: Max Nibble <nibble.max@gmail.com>
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 11:46:34 -02:00
Olli Salonen
82c10276d4 [media] cx23855: add support for DVBSky T980C (no CI support)
This patch adds basic support for DVBSky T980C card. CI interface is not supported.

DVBSky T980C is a PCIe card with the following components:
- CX23885 PCIe bridge
- Si2168-A20 demodulator
- Si2158-A20 tuner
- CIMaX SP2 CI chip

The demodulator and tuner need firmware. They're the same as used with TT CT2-4650 CI:
https://www.mail-archive.com/linux-media@vger.kernel.org/msg78033.html

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 11:46:04 -02:00
Jie Yang
35c0a8c017 ASoC: Intel: Fix block is enabled multiple times issue
During FW parsing and loading, block_list_prepare() may
be called for each raw data block copying and this may
made the hsw_block_enable() called mutiple times, which
increase block->users many times. The result of this is
hsw_block_disable() can't power gated the related block
when trying to free the blocks during suspend, and the
power gating status also confused.

Here check the block user status, only calling enable()
for those blocks who has no user yet. Remember that
this works correctlly on current case, where there are
enough SRAM memory so different module won't share a
memory block. For further usage, we may need restructure
the struct sst_mem_block to save the module list who is
using it.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-30 13:41:22 +00:00
Tomi Valkeinen
a942535d6e Merge branch '3.18/omapdss-fixes' into 3.18/fbdev-fixes 2014-10-30 14:53:49 +02:00
Marek Belisko
4ee9d9d2c2 omap: dss: connector-analog-tv: Add missing module device table
Without that fix connector-analog-tv driver isn't probed when compiled
as module.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-10-30 14:51:59 +02:00
Takashi Iwai
f213d8f79a ALSA: pcm: Use static inline for snd_pcm_lib_alloc_vmalloc_buffer()
... instead of #if 0 hack.  It's more straightforward and obvious.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 13:48:29 +01:00
Behan Webster
61110fbab1 [media] ti-fpe: LLVMLinux: Remove nested function from ti-vpe
Replace the use of nested functions where a normal function will suffice.

Nested functions are not liked by upstream kernel developers in general. Their
use breaks the use of clang as a compiler, and doesn't make the code any
better.

This code now works for both gcc and clang.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 10:46:17 -02:00
Takashi Iwai
12cddbd869 ALSA: control: Add missing kerneldoc comments to exported functions
A few functions have no proper documentation yet, so let's add them.
Along with it, remove superfluous blank line between the closing brace
and EXPORT_SYMBOL() line.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 13:44:34 +01:00
Aravind Gopalakrishnan
a597d2a5d9 amd64_edac: Add F15h M60h support
This patch adds support for ECC error decoding for F15h M60h processor.
Aside from the usual changes, the patch adds support for some new features
in the processor:
 - DDR4(unbuffered, registered); LRDIMM DDR3 support
   - relevant debug messages have been modified/added to report these
     memory types
 - new dbam_to_cs mappers
   - if (F15h M60h && LRDIMM); we need a 'multiplier' value to find
     cs_size. This multiplier value is obtained from the per-dimm
     DCSM register. So, change the interface to accept a 'cs_mask_nr'
     value to facilitate this calculation
 - switch-casing determine_memory_type()
   - done to cleanse the function of too many if-else statements
     and improve readability
   - This is now called early in read_mc_regs() to cache dram_type

Misc cleanup:
 - amd64_pci_table[] is condensed by using PCI_VDEVICE macro.

Testing details:
Tested the patch by injecting 'ECC' type errors using mce_amd_inj
and error decoding works fine.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Link: http://lkml.kernel.org/r/1414617483-4941-1-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Boris: determine_memory_type() cleanups ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-30 13:42:48 +01:00
Mark Rutland
af66abfe2e arm: perf: fold hotplug notifier into arm_pmu
Handling multiple PMUs using a single hotplug notifier requires a list
of PMUs to be maintained, with synchronisation in the probe, remove, and
notify paths. This is error-prone and makes the code much harder to
maintain.

Instead of using a single notifier, we can dynamically allocate a
notifier block per-PMU. The end result is the same, but the list of PMUs
is implicit in the hotplug notifier list rather than within a perf-local
data structure, which makes the code far easier to handle.

Signed-off-by: Mark Rutland <mark.rutland at arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:17:01 +00:00
Mark Rutland
abdf655a30 arm: perf: dynamically allocate cpu hardware data
To support multiple PMUs, each PMU will need its own accounting data.
As we don't know how (in general) many PMUs we'll have to support at
compile-time, we must allocate the data at runtime dynamically

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:17:00 +00:00
Mark Rutland
5ebd920034 arm: perf: fold percpu_pmu into pmu_hw_events
Currently the percpu_pmu pointers used as percpu_irq dev_id values are
defined separately from the other per-cpu accounting data, which make
dynamically allocating the data (as will be required for systems with
heterogeneous CPUs) difficult.

This patch moves the percpu_pmu pointers into pmu_hw_events (which is
itself allocated per cpu), which will allow for easier dynamic
allocation. Both percpu and regular irqs are requested using percpu_pmu
pointers as tokens, freeing us from having to know whether an irq is
percpu within the handler, and thus avoiding a radix tree lookup on the
handler path.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:17:00 +00:00
Mark Rutland
1167925086 arm: perf: kill get_hw_events()
Now that the arm pmu code is limited to CPU PMUs the get_hw_events()
function is superfluous, as we'll always have a set of per-cpu
pmu_hw_events structures.

This patch removes the get_hw_events() function, replacing it with
a percpu hw_events pointer. Uses of get_hw_events are updated to use
this_cpu_ptr.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:17:00 +00:00
Mark Rutland
a4560846eb arm: perf: limit size of accounting data
Commit 3fc2c83087 (ARM: perf: remove event limit from pmu_hw_events) got
rid of the upper limit on the number of events an arm_pmu could handle,
but introduced additional complexity and places a burden on each PMU
driver to allocate accounting data somehow. So far this has not
generally been useful as the only users of arm_pmu are the CPU backend
and the CCI driver.

Now that the CCI driver plugs into the perf subsystem directly, we can
remove some of the complexities that get in the way of supporting
heterogeneous CPU PMUs.

This patch restores the original limits on pmu_hw_events fields such
that the pmu_hw_events data can be allocated as a contiguous block. This
will simplify dynamic pmu_hw_events allocation in later patches.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-10-30 12:16:59 +00:00