Commit graph

691,473 commits

Author SHA1 Message Date
Dominik Dingel
3ac8e38015 s390/mm: disable KSM for storage key enabled pages
When storage keys are enabled unmerge already merged pages and prevent
new pages from being merged.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27 13:27:26 +01:00
Dominik Dingel
2faee8ff9d s390/mm: prevent and break zero page mappings in case of storage keys
As soon as storage keys are enabled we need to stop working on zero page
mappings to prevent inconsistencies between storage keys and pgste.

Otherwise following data corruption could happen:
1) guest enables storage key
2) guest sets storage key for not mapped page X
   -> change goes to PGSTE
3) guest reads from page X
   -> as X was not dirty before, the page will be zero page backed,
      storage key from PGSTE for X will go to storage key for zero page
4) guest sets storage key for not mapped page Y (same logic as above
5) guest reads from page Y
   -> as Y was not dirty before, the page will be zero page backed,
      storage key from PGSTE for Y will got to storage key for zero page
      overwriting storage key for X

While holding the mmap sem, we are safe against changes on entries we
already fixed, as every fault would need to take the mmap_sem (read).

Other vCPUs executing storage key instructions will get a one time interception
and be serialized also with mmap_sem.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27 13:27:25 +01:00
Dominik Dingel
593befa6ab mm: introduce mm_forbids_zeropage function
Add a new function stub to allow architectures to disable for
an mm_structthe backing of non-present, anonymous pages with
read-only empty zero pages.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27 13:27:24 +01:00
Dominik Dingel
a13cff318c s390/mm: recfactor global pgste updates
Replace the s390 specific page table walker for the pgste updates
with a call to the common code walk_page_range function.
There are now two pte modification functions, one for the reset
of the CMMA state and another one for the initialization of the
storage keys.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27 13:27:23 +01:00
Martin Schwidefsky
e43b49a0cb s390: update default configuration
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27 13:27:03 +01:00
Heiko Carstens
9b2efe035e s390/vdso: fix stack corruption
The kernel provided vdso functions do not get a stack frame from the
calling function and therefore may not change the stack contents, unless
they allocate space on their own.

This problem was exposed with 070b7be633 "s390/vdso: replace stck with
stcke" which writes 16 bytes instead of 8 bytes into the stack frame. These
additional 8 bytes however were indeed used by the caller (glibc) to save
data and therefore this data was corrupted by the vdso code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27 13:27:02 +01:00
Martin Schwidefsky
1f759bb3a2 s390/time: use stck clock fast for do_account_vtime
The last high frequency call site of the STCK instruction is
do_account_vtime. Replace it with the faster STCKF instruction.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27 13:27:01 +01:00
Weijie Yang
dda02fd627 mm, cma: make parameters order consistent in func declaration and definition
In the current code, the base and size parameters order is not consistent
in functions declaration and definition. If someone calls these functions
according to the declaration parameters order in cma.h, he will run into
some bug and it's hard to find the reason.

This patch makes the parameters order consistent in functions declaration
and definition.

Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-10-27 13:00:55 +01:00
Laurent Pinchart
56fa4f609b mm: cma: Use %pa to print physical addresses
Casting physical addresses to unsigned long and using %lu truncates the
values on systems where physical addresses are larger than 32 bits. Use
%pa and get rid of the cast instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-10-27 13:00:55 +01:00
Laurent Pinchart
16195ddd4e mm: cma: Ensure that reservations never cross the low/high mem boundary
Commit 95b0e655f9 ("ARM: mm: don't limit default CMA region only to
low memory") extended CMA memory reservation to allow usage of high
memory. It relied on commit f7426b983a ("mm: cma: adjust address limit
to avoid hitting low/high memory boundary") to ensure that the reserved
block never crossed the low/high memory boundary. While the
implementation correctly lowered the limit, it failed to consider the
case where the base..limit range crossed the low/high memory boundary
with enough space on each side to reserve the requested size on either
low or high memory.

Rework the base and limit adjustment to fix the problem. The function
now starts by rejecting the reservation altogether for fixed
reservations that cross the boundary, tries to reserve from high memory
first and then falls back to low memory.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-10-27 13:00:54 +01:00
Laurent Pinchart
800a85d3d2 mm: cma: Always consider a 0 base address reservation as dynamic
The fixed parameter to cma_declare_contiguous() tells the function
whether the given base address must be honoured or should be considered
as a hint only. The API considers a zero base address as meaning any
base address, which must never be considered as a fixed value.

Part of the implementation correctly checks both fixed and base != 0,
but two locations check the fixed value only. Set fixed to false when
base is 0 to fix that and simplify the code.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-10-27 13:00:54 +01:00
Laurent Pinchart
f022d8cb7e mm: cma: Don't crash on allocation if CMA area can't be activated
If activation of the CMA area fails its mutex won't be initialized,
leading to an oops at allocation time when trying to lock the mutex. Fix
this by setting the cma area count field to 0 when activation fails,
leading to allocation returning NULL immediately.

Cc: <stable@vger.kernel.org>  # v3.17
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-10-27 13:00:54 +01:00
Takashi Iwai
d5432503bf ASoC: Fixes for v3.18
A few small driver fixes for v3.18 plus the removal of the s6000 support
 since the relevant chip is no longer supported in mainline.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUTiqwAAoJECTWi3JdVIfQpswH/1pP9jyGe7XjT73m9QfodcZT
 nIpKd1Hm06vyi74Yehryq/ows9vBQOhDA1pkF6j3ti6Q0Fdpu1Ko9Co64t+9EL47
 iIUixRrQFsN0BDJvmlkHuH047x9OLnhgaegC/RgSu/ReIrpoL5AxP8LcJhgT7K8j
 tG1YrBg+wVv/lLr2UV216bXpS/dU430G/uGPj3NC4llDiP4U10YXkr1QBSbGcRo9
 2YgJV7TIO3fitjn7fZFQYjRUtwXnyjxxDN9jMWUJnbCkfuTPMyecIqoS9xGj5VyB
 YMOlFdrkBVqeqkXjks1K6k6hBSVbmLit7dBxJ64ly7+Vf1+8HK+ha7GulEe7WwM=
 =TSKi
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.18

A few small driver fixes for v3.18 plus the removal of the s6000 support
since the relevant chip is no longer supported in mainline.
2014-10-27 12:52:29 +01:00
Ville Syrjälä
6be1e3d3ea drm/i915: Fix GMBUSFREQ on vlv/chv
vlv_cdclk_freq is in kHz but we need MHz for the GMBUSFREQ divider.

This is a regression from:
commit f8bf63fdcb
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Fri Jun 13 13:37:54 2014 +0300

    drm/i915: Kill duplicated cdclk readout code from i2c

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-10-27 13:37:13 +02:00
Ville Syrjälä
7a7f84ccb8 drm/i915: Ignore long hpds on eDP ports
Turning vdd on/off can generate a long hpd pulse on eDP ports. In order
to handle hpd we would need to turn on vdd to perform aux transfers.
This would lead to an endless cycle of
"vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..."

So ignore long hpd pulses on eDP ports. eDP panels should be physically
tied to the machine anyway so they should not actually disappear and
thus don't need long hpd handling. Short hpds are still needed for link
re-train and whatnot so we can't just turn off the hpd interrupt
entirely for eDP ports. Perhaps we could turn it off whenever the panel
is disabled, but just ignoring the long hpd seems sufficient.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-10-27 13:37:13 +02:00
Ville Syrjälä
f6a1906674 drm/i915: Do a dummy DPCD read before the actual read
Sometimes we seem to get utter garbage from DPCD reads. The resulting
buffer is filled with the same byte, and the operation completed without
errors. My HP ZR24w monitor seems particularly susceptible to this
problem once it's gone into a sleep mode.

The issue seems to happen only for the first AUX message that wakes the
sink up. But as the first AUX read we often do is the DPCD receiver
cap it does wreak a bit of havoc with subsequent link training etc. when
the receiver cap bw/lane/etc. information is garbage.

A sufficient workaround seems to be to perform a single byte dummy read
before reading the actual data. I suppose that just wakes up the sink
sufficiently and we can just throw away the returned data in case it's
crap. DP_DPCD_REV seems like a sufficiently safe location to read here.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-10-27 13:37:12 +02:00
Mark Brown
1e2cf73e6b Merge remote-tracking branches 'spi/fix/dw', 'spi/fix/orion', 'spi/fix/pl022', 'spi/fix/rockchip' and 'spi/fix/spidev' into spi-linus 2014-10-27 11:26:54 +00:00
Mark Brown
bc02871b45 Merge remote-tracking branch 'regulator/fix/rk808' into regulator-linus 2014-10-27 11:26:24 +00:00
Mark Brown
f3d5c5d8aa Merge remote-tracking branch 'regulator/fix/core' into regulator-linus 2014-10-27 11:26:23 +00:00
Mark Brown
a7339126fd Linux 3.18-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUTYhlAAoJEHm+PkMAQRiG/0EIAIH7EnEdRojqYvnu0ndh3+vM
 exEd8X9gnHTx2u7nKR+6J1/c96pFMK2Ap9x0ucipnIpeB7mBdY3/tSAU1oyxdSrY
 IxbKb1wSpbvFP2gRUDeBpTWYLraYl0w5mNgbMKJ0Y3/52JtrHOKQmtHql3WTKtXu
 x9S3cp5M6KJmqbPTKfVxPsiO14KQ4tX5HbxSy0NxUgBBCK/0M92j6XCJpF9F0aGW
 esfhmYYFhvdxXWsacowCw44md/J6fsxGS2E7VTSnjUV7+NwqxNevc1opNY2givNI
 v2rEKfFiYF8qpVyBB/tp9O253KCthj63ZRjC3TwFPY9uo2KklhIukelrUb8poXY=
 =0UfP
 -----END PGP SIGNATURE-----

Merge tag 'v3.18-rc2' into asoc-sgtl5000

Linux 3.18-rc2
2014-10-27 11:18:55 +00:00
Mark Brown
c0d018bd5b Merge remote-tracking branches 'asoc/fix/adau1761', 'asoc/fix/fsl', 'asoc/fix/intel', 'asoc/fix/s6000' and 'asoc/fix/sgtl5000' into asoc-linus 2014-10-27 11:17:41 +00:00
Tina Ruchandani
c650ba7377 Staging: lustre: llite: Simplify error handling
This patch fixes the following checkpatch error:
ERROR: do not use assignment in if condition
2172: FILE: drivers/staging/lustre/lustre/llite/llite_lib.c:2172:
        if (!inode || !(sbi = ll_i2sbi(inode))) {

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:55:00 +08:00
Tina Ruchandani
f526b20adf Staging: lustre: lnet: Make functions static
This patch makes the following functions static
as they are only used in their respective files.
These functions were detected by sparse.
- lib-md.c   : lnet_md_validate
- lib-move.c : lnet_ni_*
               lnet_setpayloadbuffer
               lnet_peer_alive_locked
               lnet_msg2bufpool
               lnet_post_routed_recv_locked
               lnet_configure / lnet_unconfigure
               lnet_ioctl
               init_lnet
               fini_lnet

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:53:33 +08:00
Jiayi Ye
3247c4e5ef staging: lustre: lnet: klnds: o2iblnd: fix null dereference on failed path in o2iblnd.c
If net is null and failed path is executed, dereference null may happen.
This patch fixes it. The following Coccinelle semantic patch was used.

@@
expression E, E1;
identifier f;
statement S1,S2,S3;
@@

* if (E == NULL)
{
  ... when != if (E == NULL) S1 else S2
      when != E = E1
* E->f
  ... when any
  return ...;
}
else S3

Signed-off-by: Jiayi Ye <yejiayily@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:52:37 +08:00
Roberta Dobrescu
85b4260ddf staging: rtl8723au: Remove duplicated argument to ||
This patch removes duplicated argument to ||, fixing the
following warning detected using coccinelle tool:
duplicated argument to && or ||.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:47:22 +08:00
Roberta Dobrescu
038b70395a staging: rtl8723au: core: Remove uneeded return variable
This patch removes uneeded return variables, using only
'return _SUCCESS' instead.
It fixes the following warning detected by coccinelle:
Unneeded variable.

It was done using the following semantic patch:

@@
identifier ret;
type T;
expression e;
@@

-T ret = e;
 ... when != ret
     when strict
-return ret;
+return e;

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:47:22 +08:00
Roberta Dobrescu
35a0072771 staging: rtl8723au: os_dep: Remove uneeded return variable
This patch removes uneeded return variables, using only
'return _SUCCESS' instead.
It fixes the following warning detected by coccinelle:
Unneeded variable.

It was done using the following semantic patch:

@@
identifier ret;
type T;
expression e;
@@

-T ret = e;
 ... when != ret
     when strict
-return ret;
+return e;

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:45:03 +08:00
Roberta Dobrescu
147e45d921 staging: rtl8723au: hal: Remove uneeded return variable
This patch removes uneeded return variables, just using
'return _SUCCESS' or 'return HCI_STATUS_SUCCESS' instead.
This fixes the following warning detected using coccinelle:
Unneeded variable.

It was done using the following semantic patch:

@@
identifier ret;
type T;
expression e;
@@

-T ret = e;
 ... when != ret
     when strict
-return ret;
+return e;

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:45:03 +08:00
Roberta Dobrescu
b9b4224b13 staging: rtl8723au: Remove uneeded semicolon
This patch fixes the following warning detected using coccinelle:
Unneeded semicolon.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:45:03 +08:00
Roberta Dobrescu
08551cbb17 staging: rtl8723au: Do not use comparisons on bool tests
This patch removes unnecessary comparisons to bool.
It fixes the following warning detected using coccinelle tool:
WARNING: Comparison to bool.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:45:03 +08:00
Tina Ruchandani
de1de2f68b Staging: rtl8723au: core: Add braces around macro
This patch fixes the following checkpatch warning:
ERROR: Macros with complex values should be enclosed
in parentheses
1535: FILE: drivers/staging/rtl8723au/core/rtw_mlme.c:1535:

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:43:36 +08:00
Jiayi Ye
8a0aa750c1 staging: rtl8723au: delete successive assignments to the same location
Successive assignments to the same location is meaningless and can be
deleted. The Coccinelle semantic patch was used to find cases.

@@
expression e1,e2,e3;
@@

(
 (<+...e1++...+>)=e2;
|
 (<+...e1--...+>)=e2;
|
 (<+...++e1...+>)=e2;
|
 (<+...--e1...+>)=e2;
|
e1=e2;
e1 = <+...e1...+>;
|
*e1=e2;
*e1=e3;
)

Signed-off-by: Jiayi Ye <yejiayily@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:42:37 +08:00
Vaishali Thakkar
94d2fc6361 Staging: rtl8723au: Use USB API functions
This patch replaces driver specific functions(RT_usb_endpoint_is_bulk_in,
RT_usb_endpoint_is_bulk_out, RT_usb_endpoint_is_int_in) with USB API
functions(usb_endpoint_is_bulk_in, usb_endpoint_is_bulk_out,
usb_endpoint_is_int_in).

Also, this patch removes these three RT functions as they are no longer
needed after replacement.

This patch also have one line over 80 characters as limiting it to 80
characters does not make code look good.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:42:36 +08:00
Geert Uytterhoeven
bcf8eb09b5 nubus: Remove superfluous interrupt disable/restore
As of commit e4dc601bf9 ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-10-27 11:03:19 +01:00
Geert Uytterhoeven
f7bbd12a4b m68k: Wire up bpf
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
2014-10-27 11:02:19 +01:00
Greg Kroah-Hartman
eec5883f51 greybus: module: remove unneeded XXX comment about module id values
We do properly check for duplicate module ids, as fixed in
008d85d90ae1ab31f1f7b80f245f6ee2eb5aed49 "module: don't create duplicate
module ids", so remove the XXX marker.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-27 18:00:13 +08:00
Greg Kroah-Hartman
6507cced6b greybus: FIXME/XXX removals: We have proper reference counting now
Now that we have proper reference counting for modules, interfaces, and
connections, no need to worry about grabbing a pointer to your "parent"
structure, all is good.

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-10-27 17:58:54 +08:00
Greg Kroah-Hartman
4d98098942 greybus: uart-gb: remove global init functions
The uart-gb code needs to init the tty core before it can add devices.
Previously we hard-coded this in the greybus core, move this to be
"dynamic" and self-contained within the uart-gb.c file.

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-10-27 17:42:45 +08:00
Greg Kroah-Hartman
aed0bc6e68 greybus: uart-gb: convert over to the connection interface
Move the uart code over to use the "new" connection interface, instead
of the "old" module interface.

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-10-27 17:32:34 +08:00
Kailang Yang
6a98e34b58 ALSA: hda/realtek - New SSID for Headset quirk
It is lite version of AIO machine(0x0626).
The audio layout of this machine was similar with SSID 0x0626.
The audio was same as commit ad8ff99e6b.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-27 09:54:23 +01:00
Alex Elder
81f4e22732 greybus: embed the i2c adapter struct
We don't need to dynamically allocate the i2c adapter structure, we
can just embed it right in struct gb_i2c_device.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-10-27 16:53:10 +08:00
Alex Elder
81d631cae8 greybus: gpio: kill gpio_controller->gpio
This field is never used (and not needed) so get rid of it.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-10-27 16:53:10 +08:00
Michal Simek
a4f174dee4 microblaze: Wire up bpf syscall
Add new bpf syscall.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-10-27 09:25:34 +01:00
Karl Beldan
9ffe904405 mac80211: minstrel_ht: do not always skip ht rates vht_only is true
When CONFIG_MAC80211_RC_MINSTREL_VHT is set, the module param
minstrel_vht_only tells minstrel_ht whether to allow the mix of ht rates
with vht rates.
ATM, minstrel_ht skips ht rates when minstrel_vht_only is true, but it does
that even if vht is not supported, which makes the sta rates fallback to
legacy as no ht rate gets enabled.

Fixes: 9208247d74 ("mac80211: minstrel_ht: add basic support for VHT rates <= 3SS@80MHz")
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27 08:48:35 +01:00
Emmanuel Grumbach
cfede0d80d mac80211: don't flush when probing the AP
All the callers of ieee80211_mgd_probe_ap_send return right
after they call the flush() callback. This means that calling
flush() is uneeded since its meaning is to wait until the
queues of the device are empty.

Devices that know how to report status on Tx will do so using
the regular path (ieee80211_tx_status) and this status will
trigger the continuation of the flow of the probe
(ieee80211_sta_tx_notify).

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27 08:48:34 +01:00
Ben Greear
b5dfae020b mac80211: support creating vifs with specified mac address
This is useful when creating virtual interfaces.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27 08:48:34 +01:00
Ben Greear
e8f479b112 cfg80211: support configuring vif mac addr on create
This is useful when creating virtual interfaces.
Keeps udev from mucking with things it shouldn't, since
the default MAC is never seen by udev when specified on
the cmd-line during creation.

Signed-off-by: Ben Greear <greearb@candelatech.com>
[check for feature flag in nl80211 to force drivers to set it]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27 08:48:33 +01:00
Ben Greear
9a0cb89a8a mac80211-hwsim: support creating wiphy w/out creating wlanX
Good for automated testing, where user can create wlan
interfaces with specified names.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27 08:48:33 +01:00
Ben Greear
e27513fbd0 mac80211: support creating wiphy w/out creating wlanX
This will be helpful when using the mac80211_hwsim
wiphys and automated testing.  Let user create the
vifs as needed, and named as expected.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27 08:48:32 +01:00
Ben Greear
5cd8926bbf mac80211-hwsim: support creating radios with specific name
Otherwise, it can be very difficult to know which is which
if you are trying to do detailed testing.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-27 08:48:32 +01:00