Whilst the driver currently creates one IOMMU group per device, this
will soon change when we start supporting non-transparent PCI bridges
which require all upstream masters to be assigned to the same address
space.
This patch reworks our IOMMU group code so that we can easily support
multi-master groups. The master configuration (streamids and smrs) is
stored as private iommudata on the group, whilst the low-level attach/detach
code is updated to avoid double alloc/free when dealing with multiple
masters sharing the same SMMU configuration. This unifies device
handling, regardless of whether the device sits on the platform or pci
bus.
Signed-off-by: Will Deacon <will.deacon@arm.com>
When debugging and testing code on an SMMU that supports nested
translation, it can be useful to restrict the driver to a particular
stage of translation.
This patch adds a module parameter to the ARM SMMU driver to allow this
by restricting the ability of the probe() code to detect support for
only the specified stage.
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch adds ability to configure delay between transmission of
words over SPI bus if it's required by SPI slave devices.
New optional SPI slave property:
- ti,spi-word-delay : delay between transmission of words
(SPIFMTn.WDELAY, SPIDAT1.WDEL)
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove empty function davinci_spi_cleanup().
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
... to just 'torture_runnable'. It follows other variable naming
and is shorter.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The NOCB follower wakeup ordering depends on the store to the tail
pointer happening before the wakeup. However, because atomic_long_add()
does not return a value, it does not provide ordering guarantees, and
the locking in wake_up() only guarantees that the store will happen
before the unlock, which might be too late. Even though this is only a
theoretical issue, this commit adds a smp_mb__after_atomic() after the
final atomic_long_add() to provide the needed ordering guarantee.
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
If an RCU callback is queued on a no-CBs CPU from idle code with irqs
disabled, and if that CPU stays idle forever after, the callback will
never be invoked. This commit therefore adds a check for this situation
in ____call_rcu_nocb(), invoking the RCU core solely for the purpose
of the ensuing return-to-idle transition. (If the CPU doesn't return
to idle, the next scheduling-clock interrupt will fix things up.)
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The NOCB leader wakeup ordering depends on the store to the header
happening before the check for the leader already being awake. However,
because atomic_long_add() does not return a value, it does not provide
ordering guarantees, the incorrect comment in wake_nocb_leader()
notwithstanding. This commit therefore adds a smp_mb__after_atomic()
after the final atomic_long_add() to provide the needed ordering
guarantee.
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
If there are no nohz_full= CPUs, then there is currently no reason to
track sysidle state. This commit therefore short-circuits this state
tracking if !tick_nohz_full_enabled().
Note that these checks will need to be revisited if nohz_full= state
can ever be changed at runtime.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Now that we have rcu_state_p, which references rcu_preempt_state for
TREE_PREEMPT_RCU and rcu_sched_state for TREE_RCU, we don't need a
separate rcu_sysidle_state variable. This commit therefore eliminates
rcu_preempt_state in favor of rcu_state_p.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
If we configure a kernel with CONFIG_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_NONE=y and
CONFIG_CPUMASK_OFFSTACK=n and do not pass in a rcu_nocb= boot parameter, the
cpumask rcu_nocb_mask can be garbage instead of NULL.
Hence this commit replaces checks for rcu_nocb_mask == NULL with a check for
have_rcu_nocb_mask.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
RCU currently uses for_each_possible_cpu() to spawn rcuo kthreads,
which can result in more rcuo kthreads than one would expect, for
example, derRichard reported 64 CPUs worth of rcuo kthreads on an
8-CPU image. This commit therefore creates rcuo kthreads only for
those CPUs that actually come online.
This was reported by derRichard on the OFTC IRC network.
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Currently, RCU spawns kthreads from several different early_initcall()
functions. Although this has served RCU well for quite some time,
as more kthreads are added a more deterministic approach is required.
This commit therefore causes all of RCU's early-boot kthreads to be
spawned from a single early_initcall() function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Return false instead of 0 in rcu_nocb_adopt_orphan_cbs() as this has
bool as return type.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Return false instead of 0 in __call_rcu_nocb() as this has bool as
return type.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Return true/false in rcu_nocb_adopt_orphan_cbs() instead of 0/1 as
this function has return type of bool.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Return true/false instead of 0/1 in __call_rcu_nocb() as this returns a
bool type.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This commit checks the return value of the zalloc_cpumask_var() used for
allocating cpumask for rcu_nocb_mask.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Commit b58cc46c5f (rcu: Don't offload callbacks unless specifically
requested) failed to adjust the callback lists of the CPUs that are
known to be no-CBs CPUs only because they are also nohz_full= CPUs.
This failure can result in callbacks that are posted during early boot
getting stranded on nxtlist for CPUs whose no-CBs property becomes
apparent late, and there can also be spurious warnings about offline
CPUs posting callbacks.
This commit fixes these problems by adding an early-boot rcu_init_nohz()
that properly initializes the no-CBs CPUs.
Note that kernels built with CONFIG_RCU_NOCB_CPU_ALL=y or with
CONFIG_RCU_NOCB_CPU=n do not exhibit this bug. Neither do kernels
booted without the nohz_full= boot parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Fix a copy'n'paste error making the rk3188 emmc pinctrl nodes reference
the pcfg_pull_default setting that is not available on rk3188.
Reported-by: Naoki FUKAUMI <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The regulator constraints already provide a field for the ramp_delay, so
there is no need to set this manually. Therefore implement the set_ramp_delay
callback and convert the pdata value to the constraint value if necessary.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Call stack of regcache_sync calls may not emit any error message even if
operation was cancelled due an error in I/O driver. One such a silent error
is for instance if I2C bus driver doesn't receive ACK from the I2C device
and returns -EREMOTEIO.
Since many users of regcache_sync() don't check and print the error there is
no any indication that HW registers are potentially out of sync.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The host and otg regulator pinctrl settings got swapped, making the host
reference the otg pinctrl and the other way round. The actual pins are
correct (gpio0-3 for host and gpio2-31 for otg).
Reported-by: Naoki FUKAUMI <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Contributors are not listed in alphabetical order as claimed by documentation.
Signed-off-by: Oscar Utbult <oscar@oscr.io>
Signed-off-by: Mark Brown <broonie@kernel.org>
As Acme Systems Fox G20 is available in Device Tree flavor and that we plan to
remove all the board files soon, we can remove this one without problem.
If you use this board, please use a DT-enabled at91sam9g20 kernel with
at91-foxg20.dts.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Sergio Tanzilli <tanzilli@acmesystems.it>
Call scsi_scan_host at the end of host initialization and fix and error path
to free allocated resource.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add code to support the new Areca Raid ARC12x4 series adapters.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Revise comment and some character strings.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Rewrite ioctl entry and its relate function. This patch fix ioctl data
read/write error and change data I/O access from byte to Dword.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This modification is for consistency with upcoming adapter type D.
Both adapter type B and D have similar H/W and S/W structure.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Rename some variable and function names for readability and consistency.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Clear outbound doorbell buffer completely for adapter type C. This is to
prevent getting bad data input from IOP before ioctl command processing
starts.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Adjust printing order of adapter model name and firmware version.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove calling arcmsr_hbb_enable_driver_mode by in-lining the code into
the caller.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Revise message_isr_bh_fn to remove the duplicate code for each adapter type.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch fixes the wrong return status of abort command.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch limits the max. number of SCSI commmand request to avoid command
overflow.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds code to support system hibernation.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds code to support MSI and MSI-X interrupt.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch rewrites the interrupt service routine relate function to fix
a command timeout under heavy controller load.
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Pvcv
-----END PGP SIGNATURE-----
Merge tag 'keys-pkcs7-20140916' into keys-next
Changes for next to improve the matching of asymmetric keys and to improve the
handling of PKCS#7 certificates:
(1) Provide a method to preparse the data supplied for matching a key. This
permits they key type to extract out the bits it needs for matching once
only.
Further, the type of search (direct lookup or iterative) can be set and
the function used to actually check the match can be set by preparse
rather than being hard coded for the type.
(2) Improves asymmetric keys identification.
Keys derived from X.509 certs now get labelled with IDs derived from their
issuer and certificate number (required to match PKCS#7) and from their
SKID and subject (required to match X.509).
IDs are now binary and match criterion preparsing is provided so that
criteria can be turned into binary blobs to make matching faster.
(3) Improves PKCS#7 message handling to permit PKCS#7 messages without X.509
cert lists to be matched to trusted keys, thereby allowing minimally sized
PKCS#7 certs to be used.
(4) Improves PKCS#7 message handling to better handle certificate chains that
are broken due to unsupported crypto that can otherwise by used to
intersect a trust keyring.
These must go on top of the PKCS#7 parser cleanup fixes.
Signed-off-by: David Howells <dhowells@redhat.com>
The X.509 certificate list in a PKCS#7 message is optional. To save space, we
can omit the inclusion of any X.509 certificates if we are sure that we can
look the relevant public key up by the serial number and issuer given in a
signed info block.
This also supports use of a signed info block for which we can't find a
matching X.509 cert in the certificate list, though it be populated.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Provide better handling of unsupported crypto when verifying a PKCS#7 message.
If we can't bridge the gap between a pair of X.509 certs or between a signed
info block and an X.509 cert because it involves some crypto we don't support,
that's not necessarily the end of the world as there may be other ways points
at which we can intersect with a ring of trusted keys.
Instead, only produce ENOPKG immediately if all the signed info blocks in a
PKCS#7 message require unsupported crypto to bridge to the first X.509 cert.
Otherwise, we defer the generation of ENOPKG until we get ENOKEY during trust
validation.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Make use of the new match string preparsing to overhaul key identification
when searching for asymmetric keys. The following changes are made:
(1) Use the previously created asymmetric_key_id struct to hold the following
key IDs derived from the X.509 certificate or PKCS#7 message:
id: serial number + issuer
skid: subjKeyId + subject
authority: authKeyId + issuer
(2) Replace the hex fingerprint attached to key->type_data[1] with an
asymmetric_key_ids struct containing the id and the skid (if present).
(3) Make the asymmetric_type match data preparse select one of two searches:
(a) An iterative search for the key ID given if prefixed with "id:". The
prefix is expected to be followed by a hex string giving the ID to
search for. The criterion key ID is checked against all key IDs
recorded on the key.
(b) A direct search if the key ID is not prefixed with "id:". This will
look for an exact match on the key description.
(4) Make x509_request_asymmetric_key() take a key ID. This is then converted
into "id:<hex>" and passed into keyring_search() where match preparsing
will turn it back into a binary ID.
(5) X.509 certificate verification then takes the authority key ID and looks
up a key that matches it to find the public key for the certificate
signature.
(6) PKCS#7 certificate verification then takes the id key ID and looks up a
key that matches it to find the public key for the signed information
block signature.
Additional changes:
(1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the
cert to be rejected with -EBADMSG.
(2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP
public key fingerprints. If PGP is supported in future, this should
generate a key ID that carries the fingerprint.
(3) Th ca_keyid= kernel command line option is now converted to a key ID and
used to match the authority key ID. Possibly this should only match the
actual authKeyId part and not the issuer as well.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Implement the first step in using binary key IDs for asymmetric keys rather
than hex string keys.
The previously added match data preparsing will be able to convert hex
criterion strings into binary which can then be compared more rapidly.
Further, we actually want more then one ID string per public key. The problem
is that X.509 certs refer to other X.509 certs by matching Issuer + AuthKeyId
to Subject + SubjKeyId, but PKCS#7 messages match against X.509 Issuer +
SerialNumber.
This patch just provides facilities for a later patch to make use of.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>