Irq_dispose_mapping should be called in err path to release
the resources that irq_of_parse_and_map requested.
Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for PF0200 coin cell/super capacitor charger which works as
a current limited voltage source via the LICELL pin. When VIN goes below
a certain threshold LICELL is used to provide power for VSNVS which is
usually used to hold up secure non-volatile storage and the real-time
clock on the SoC.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As it is quite common to use a stereo pair of amps but share the IRQ
line between them both add the IRQF_SHARED flag whilst requesting
cs35l35's IRQ.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tidy up the code a little by adding a local variable for i2c_client->dev
rather than referring to it explicitly everytime.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for setting how the I2S pins are driven in unused slots,
currently the chip will just use the default of drive 0, however this
causes issues when multiple devices are attached to the same bus.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a binding for setting how the I2S pins are driven in unused slots,
currently the chip will just use the default of drive 0, however
this causes issues when multiple devices are attached to the same bus.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A return statement is missing just before the error paths at the end of
probe. This causes us to fall straight into the error path and disable
the supplies and re-enable reset, as these are only controlled during
probe this causes the part to no longer function.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As a commit 4cd9899f0d ("ASoC: Intel: Skylake: Add multiple pin
formats") describes, 'fixups is applied to pin 0 only'. On the other
hand, the commit left some codes as what they were. This might
confuses readers.
This commit fixes the issue. This doesn't change driver behaviour at all.
Fixes: 4cd9899f0d ("ASoC: Intel: Skylake: Add multiple pin formats")
Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Check that the sink really declared 12bpc support before we enable it.
This should not actually never happen since it's mandatory for HDMI
sinks to support 12bpc if they support any deep color modes. But
reality disagrees with the theory and there are actually sinks in
the wild that violate the spec.
v2: Fix the output_types check
Update commit message to state that these things are in fact real
Cc: stable@vger.kernel.org
Cc: Nicholas Sielicki <nicholas.sielicki@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99250
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170213175818.24958-1-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
gup_p4d_range() should call gup_pud_range(), not itself.
[ This was not noticed on x86: this is the HAVE_GENERIC_RCU_GUP code
used by arm[64] and powerpc - Linus ]
Fixes: c2febafc67 ("mm: convert generic code to 5-level paging")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reported-by: Anton Blanchard <anton@samba.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'store' function for the "event_char" device attribute currently
expects a base 10 value. The value is composed of an enable bit in bit
8 and an 8-bit "event character" code in bits 7 to 0. It seems
reasonable to allow hexadecimal and octal numbers to be written to the
device attribute in addition to decimal. Make it so.
Change the debug message to show the value in hexadecimal, rather than
decimal.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
The "event_char" device attribute value, when written, is interpreted as
an enable bit in bit 8, and an "event character" in bits 7 to 0.
Return an error -EINVAL for out-of-range values. Use kstrtouint() to
parse the integer instead of the obsolete simple_strtoul().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Valid latency timer values are between 1 ms and 255 ms in 1 ms steps.
The store function for the "latency_timer" device attribute currently
allows any value, although only the lower 16 bits will be sent to the
device, and the device only stores the lower 8 bits. The hardware
appears to accept the (invalid) value 0 and treats it the same as 1
(resulting in a latency of 1 ms).
Change the latency_timer_store() function to accept only the values 0 to
255, returning an error -EINVAL for out-of-range values. Call
kstrtou8() to parse the integer instead of the obsolete
simple_strtoul().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
If a BM type chip has iSerialNumber set to 0 in its EEPROM, an incorrect
value is read from the bcdDevice field of the USB descriptor, making it
look like an AM type chip. Attempt to correct this in
ftdi_determine_type() by attempting to read the latency timer for an AM
type chip if it has iSerialNumber set to 0. If that succeeds, assume it
is a BM type chip.
Currently, read_latency_timer() bails out without reading the latency
timer for an AM type chip, so factor out the guts of
read_latency_timer() into a new function _read_latency_timer() that
attempts to read the latency timer regardless of chip type, and returns
either the latency timer value or a negative error number.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add required binding support to probe through device tree.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add documentation for the bindings of the high speed SPI controller found
on newer bcm63xx SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The HSSPI block actually has two clock inputs, one for gating the block,
and one for the PLL rate. To allow these to be represented as two clocks,
add support for retrieving the rate from a separate "pll" clock, if the
"hsspi" clock does not provide one.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 003342a500 ("drm/i915: Keep track of active
forcewake domains in a bitmask") I forgot to adjust the
newly introduce fw_domains_active state across reset.
This caused the assert_forcewakes_inactive to trigger
during suspend and resume if there were user held
forcewakes.
v2: Bitmask checks are required since vfuncs are not
always present.
v3: Move bitmask tracking to get/put vfunc for simplicity.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 003342a500 ("drm/i915: Keep track of active forcewake domains in a bitmask")
Testcase: igt/drv_suspend/forcewake
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Paneri, Praveen" <praveen.paneri@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: v4.10+ <stable@vger.kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310093249.4484-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit b847305080)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
printks are slow so we should not be doing them from the vblank evade
critical section. These could explain why we sometimes seem to
blow past our 100 usec deadline.
The problem has been there ever since commit c331879ce8 ("drm/i915:
skylake sprite plane scaling using shared scalers.") but it may not have
been readily visible until commit e1edbd44e2 ("drm/i915: Complain
if we take too long under vblank evasion.") increased our chances
of noticing it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488974407-25175-1-git-send-email-maarten.lankhorst@linux.intel.com
Fixes: c331879ce8 ("drm/i915: skylake sprite plane scaling using shared scalers")
Cc: <stable@vger.kernel.org> # v4.2+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[mlankhorst: Add missing tags, point to the correct offending commit]
(cherry picked from commit d38146b9ee)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It looks like we were incorrectly comparing vma->node against itself
instead of the target node, when evicting for a node on systems where we
need guard pages between regions with different cache domains. As a
consequence we can end up trying to needlessly evict neighbouring nodes,
even if they have the same cache domain, and if they were pinned we
would fail the eviction.
Fixes: 625d988acc ("drm/i915: Extract reserving space in the GTT to a helper")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306235414.23407-3-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit fe65cbdbc9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The latency timer was introduced with the FT232BM and FT245BM chips. Do
not bother attempting to read or write it for older chip versions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Commit 2f3f9bcf00 ("perf tools: Add +field argument support for
--field option") by Jiri Olsa <jolsa@kernel.org> introduced +field style
argument support for --field option.
This is useful but not updated documentation. This add a little
description there.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170313083252.23644-1-changbin.du@intel.com
[ Slightly improved the phrase structure ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skip the sample which doesn't have branch_info to avoid segmentation
fault:
The fault can be reproduced by:
perf record -a
perf report -F cycles
Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 0e332f033a ("perf tools: Add support for cycles, weight branch_info field")
Link: http://lkml.kernel.org/r/20170313083148.23568-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When WB_registered flag is not set, wb_queue_work() skips queuing the
work, but does not perform the necessary clean up. In particular, if
work->auto_free is true, it should free the memory.
The leak condition can be reprouced by following these steps:
mount /dev/sdb /mnt/sdb
/* In qemu console: device_del sdb */
umount /dev/sdb
Above will result in a wb_queue_work() call on an unregistered wb and
thus leak memory.
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
In case cpu was unplugged, we need to make sure not to assume
that the tags for that cpu are still allocated. so check
for null tags when reinitializing a tagset.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Ignore two files: pmu-events/{jevents,pmu-events.c} which are generated
during the build.
Committer notes:
Testing it:
$ make -C tools/perf/
$ git status
On branch perf/core
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/perf/pmu-events/jevents
tools/perf/pmu-events/pmu-events.c
nothing added to commit but untracked files present (use "git add" to track)
$
After the patch:
$ git status
On branch perf/core
nothing to commit, working tree clean
$
Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170313083026.23487-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the c2c command to command-list.txt so perf help can list this
command.
Committer notes:
Before:
# perf help | grep c2c
#
After:
# perf help | grep c2c
c2c Shared Data C2C/HITM Analyzer.
#
Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170313082845.23373-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
mmap(MAP_32BIT) is broken due to the dependency on the TIF_ADDR32 thread
flag.
For 64bit applications MAP_32BIT will force legacy bottom-up allocations and
the 1GB address space restriction even if the application issued a compat
syscall, which should not be subject of these restrictions.
For 32bit applications, which issue 64bit syscalls the newly introduced
mmap base separation into 64-bit and compat bases changed the behaviour
because now a 64-bit mapping is returned, but due to the TIF_ADDR32
dependency MAP_32BIT is ignored. Before the separation a 32-bit mapping was
returned, so the MAP_32BIT handling was irrelevant.
Replace the check for TIF_ADDR32 with a check for the compat syscall. That
solves both the 64-bit issuing a compat syscall and the 32-bit issuing a
64-bit syscall problems.
[ tglx: Massaged changelog ]
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170306141721.9188-5-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
mmap() uses a base address, from which it starts to look for a free space
for allocation.
The base address is stored in mm->mmap_base, which is calculated during
exec(). The address depends on task's size, set rlimit for stack, ASLR
randomization. The base depends on the task size and the number of random
bits which are different for 64-bit and 32bit applications.
Due to the fact, that the base address is fixed, its mmap() from a compat
(32bit) syscall issued by a 64bit task will return a address which is based
on the 64bit base address and does not fit into the 32bit address space
(4GB). The returned pointer is truncated to 32bit, which results in an
invalid address.
To solve store a seperate compat address base plus a compat legacy address
base in mm_struct. These bases are calculated at exec() time and can be
used later to address the 32bit compat mmap() issued by 64 bit
applications.
As a consequence of this change 32-bit applications issuing a 64-bit
syscall (after doing a long jump) will get a 64-bit mapping now. Before
this change 32-bit applications always got a 32bit mapping.
[ tglx: Massaged changelog and added a comment ]
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To correctly handle 32-bit and 64-bit mmap() syscalls in 64bit applications
its required to have separate address bases to place a mapping.
The tasksize can be used as an indicator to select the proper parameters
for mmap_base().
This requires the following changes:
- Add task_size argument to mmap_base() and make the calculation based on it.
- Provide mmap_legacy_base() as a seperate function
- Use the new functions in arch_pick_mmap_layout()
[ tglx: Massaged changelog ]
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170306141721.9188-3-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The compat (32bit) mmap() sycall issued by a 64-bit task results in a
mapping above 4GB. That's outside the compat mode address space and
prevents CRIU to restore 32bit processes from a 64bit application.
As a first step to address this, split out the address base randomizing
calculation from arch_mmap_rnd() into a helper function, which can be used
independent of mmap_ia32() based decisions.
[ tglx: Massaged changelog ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170306141721.9188-2-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
UV4 does not employ a software-timeout as in previous generations so a new
wait_completion routine without this logic is required. Certain completion
statuses require the AUX status bit in addition to ERROR and BUSY.
Add the read_status routine to construct the full completion status. Use
read_status in the uv4_wait_completion routine to handle all possible
completion statuses.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: sivanich@hpe.com
Cc: rja@hpe.com
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/1489077734-111753-7-git-send-email-abanman@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove the present wait_completion routine and add a function pointer by
the same name to the bau_operations struct. Rather than switching on the
UV hub version during message processing, set the architecture-specific
uv*_wait_completion during initialization.
The uv123_bau_ops struct must be split into uv1 and uv2_3 versions to
accommodate the corresponding wait_completion routines.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: sivanich@hpe.com
Cc: rja@hpe.com
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/1489077734-111753-6-git-send-email-abanman@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The location of the ERROR and BUSY status bits depends on the descriptor
index, i.e. the CPU, of the message. Since this index does not change,
there is no need to calculate the mmr and index location during message
processing. The less work we do in the hot path the better.
Add status_mmr and status_index fields to bau_control and compute their
values during initialization. Add kerneldoc descriptions for the new
fields. Update uv*_wait_completion to use these fields rather than
receiving the information as parameters.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: sivanich@hpe.com
Cc: rja@hpe.com
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/1489077734-111753-5-git-send-email-abanman@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the bau_operations declaration after bau struct declarations so the
bau structs can be referenced when adding new functions to
bau_operations. That way we avoid forward declarations of the bau
structs.
Likewise, move uv*_bau_ops structs down to avoid forward declarations of
new functions defined in the same file. Declare these structs __initconst
since they are only used during initialization. Similarly, declare the
bau_operations ops instance __ro_after_init as it is read-only after
initialization.
This is a preparatory patch for adding wait_completion to bau_operations.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: sivanich@hpe.com
Cc: rja@hpe.com
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/1489077734-111753-4-git-send-email-abanman@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On UV4, the destination agent verifies each message by checking the
descriptor qualifier field of the message payload. Messages without this
field set to 0x534749 will cause a hub error to assert. Split
bau_message_payload into uv1_2_3 and uv4 versions to account for the
different payload formats.
Enforce the size of each field by using the appropriate u** integer type.
Replace extraneous comments with KernelDoc comment.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: sivanich@hpe.com
Cc: rja@hpe.com
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/1489077734-111753-3-git-send-email-abanman@hpe.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The patch 791ff39ae3: "drm/i915: Live testing for context
execution" from Feb 13, 2017, leads to the following static checker
warning:
drivers/gpu/drm/i915/selftests/i915_gem_context.c:347 igt_ctx_exec()
error: 'file' dereferencing possible ERR_PTR()
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 791ff39ae3 ("drm/i915: Live testing for context execution")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313124724.10614-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This patch fixes the problem that the missing value of the route path
setting table and incorrect values are set in the CMD_ROUTE_SELECT
register.
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
[Kuninori: shared data on MIX and non-MIX case]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of the actual interface index or name, set destination register
to just 1 or 0 depending on whether the lookup succeeded or not if
NFTA_FIB_F_PRESENT was set in userspace.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
this allows to assign connection tracking helpers to
connections via nft objref infrastructure.
The idea is to first specifiy a helper object:
table ip filter {
ct helper some-name {
type "ftp"
protocol tcp
l3proto ip
}
}
and then assign it via
nft add ... ct helper set "some-name"
helper assignment works for new conntracks only as we cannot expand the
conntrack extension area once it has been committed to the main conntrack
table.
ipv4 and ipv6 protocols are tracked stored separately so
we can also handle families that observe both ipv4 and ipv6 traffic.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
this is needed by the upcoming ct helper object type --
we'd like to be able use the table family (ip, ip6, inet) to figure
out which helper has to be requested.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Element comments may come without any prior set flag, so we have to keep
a list of dummy struct nft_set_ext to keep this information around. This
is only useful for set dumps to userspace. From the packet path, this
set type relies on the bitmap representation. This patch simplifies the
logic since we don't need to allocate the dummy nft_set_ext structure
anymore on the fly at the cost of increasing memory consumption because
of the list of dummy struct nft_set_ext.
Fixes: 665153ff57 ("netfilter: nf_tables: add bitmap set type")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since the nfct and nfctinfo have been combined, the nf_conn structure
must be at least 8 bytes aligned, as the 3 LSB bits are used for the
nfctinfo. But there's a fake nf_conn structure to denote untracked
connections, which is created by a PER_CPU construct. This does not
guarantee that it will be 8 bytes aligned and can break the logic in
determining the correct nfctinfo.
I triggered this on a 32bit machine with the following error:
BUG: unable to handle kernel NULL pointer dereference at 00000af4
IP: nf_ct_deliver_cached_events+0x1b/0xfb
*pdpt = 0000000031962001 *pde = 0000000000000000
Oops: 0000 [#1] SMP
[Modules linked in: ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipv6 crc_ccitt ppdev r8169 parport_pc parport
OK ]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-test+ #75
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
task: c126ec00 task.stack: c1258000
EIP: nf_ct_deliver_cached_events+0x1b/0xfb
EFLAGS: 00010202 CPU: 0
EAX: 0021cd01 EBX: 00000000 ECX: 27b0c767 EDX: 32bcb17a
ESI: f34135c0 EDI: f34135c0 EBP: f2debd60 ESP: f2debd3c
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 80050033 CR2: 00000af4 CR3: 309a0440 CR4: 001406f0
Call Trace:
<SOFTIRQ>
? ipv6_skip_exthdr+0xac/0xcb
ipv6_confirm+0x10c/0x119 [nf_conntrack_ipv6]
nf_hook_slow+0x22/0xc7
nf_hook+0x9a/0xad [ipv6]
? ip6t_do_table+0x356/0x379 [ip6_tables]
? ip6_fragment+0x9e9/0x9e9 [ipv6]
ip6_output+0xee/0x107 [ipv6]
? ip6_fragment+0x9e9/0x9e9 [ipv6]
dst_output+0x36/0x4d [ipv6]
NF_HOOK.constprop.37+0xb2/0xba [ipv6]
? icmp6_dst_alloc+0x2c/0xfd [ipv6]
? local_bh_enable+0x14/0x14 [ipv6]
mld_sendpack+0x1c5/0x281 [ipv6]
? mark_held_locks+0x40/0x5c
mld_ifc_timer_expire+0x1f6/0x21e [ipv6]
call_timer_fn+0x135/0x283
? detach_if_pending+0x55/0x55
? mld_dad_timer_expire+0x3e/0x3e [ipv6]
__run_timers+0x111/0x14b
? mld_dad_timer_expire+0x3e/0x3e [ipv6]
run_timer_softirq+0x1c/0x36
__do_softirq+0x185/0x37c
? test_ti_thread_flag.constprop.19+0xd/0xd
do_softirq_own_stack+0x22/0x28
</SOFTIRQ>
irq_exit+0x5a/0xa4
smp_apic_timer_interrupt+0x2a/0x34
apic_timer_interrupt+0x37/0x3c
By using DEFINE/DECLARE_PER_CPU_ALIGNED we can enforce at least 8 byte
alignment as all cache line sizes are at least 8 bytes or more.
Fixes: a9e419dc7b ("netfilter: merge ctinfo into nfct pointer storage area")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
