Instead of using i40e_add_filter or i40e_del_filter directly, when
adding a MAC address, we should normally be using i40e_add_mac_filter or
i40e_del_mac_filter. These functions correctly handle the various cases
of VLAN mode or PVID settings. This ensures consistency and avoids the
issues that can occur with the recent addition of a WARN_ON() in
i40e_sync_vsi_filters.
Change-ID: I7fe62db063391fdd1180b2d6a6a3c5ab4307eeee
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Use __i40e_del_filter instead of using i40e_del_filter() which will
avoid doing an additional search to delete a filter we already have the
pointer for.
Change-ID: Iea5a7e3cafbf8c682ed9d3b6c69cf5ff53f44daf
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
These functions purpose is to add a new MAC filter correctly, whether
we're using VLANs or not. Their goal is to ensure that all active VLANs
get the new MAC filter. Rename them so that their intent is clear. They
function correctly regardless of whether we have any active VLANs or
only have I40E_VLAN_ANY filters. The new names convey how they function
in a more clear manner.
Change-ID: Iec1961f968c0223a7132724a74e26a665750b107
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This function won't be appreciably slower when in VLAN mode, so there is
no real reason to not just call it directly. In either case, we still
must search the full table for a MAC/VLAN pair. We do get to stop
searching a tiny bit early in the case of knowing we are not in VLAN
mode, but this is a minor savings and we can avoid the code complexity
by not having to worry about the check.
Change-ID: I533412195b3a42f51cf629e3675dd5145aea8625
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fold the check for determining when to call i40e_put_mac_in_vlan directly
into the function so that we don't need to decide which function to use
ahead of time. This allows us to just call i40e_put_mac_in_vlan directly
without having to check ahead of time.
Change-ID: Ifff526940748ac14b8418be5df5a149502eed137
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Now that we have the separate i40e_(add|rm)_vlan_all_mac functions, we
should not be using the i40e_vsi_kill_vlan or i40e_vsi_add_vlan
functions when PVID is set or when VID is less than 1. This allows us to
remove some checks in i40e_vsi_add_vlan and ensures that callers which
need to handle VID=0 or VID=-1 don't accidentally invoke the VLAN mode
handling used to convert filters when entering VLAN mode. We also update
the functions to take u16 instead of s16 as well since they no longer
expect to be called with VID=I40E_VLAN_ANY.
Change-ID: Ibddf44a8bb840dde8ceef2a4fdb92fd953b05a57
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Debugging issues caused by pfmemalloc is often tedious.
Add a new SNMP counter to more easily diagnose these problems.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Acked-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nothing in devinet.c relies on fib_lookup.h; remove it from the includes
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When __alloc_skb() allocates an skb from fast clone cache,
setting pfmemalloc on the clone is not needed.
Clone will be properly initialized later at skb_clone() time,
including pfmemalloc field, as it is included in the
headers_start/headers_end section which is fully copied.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If process forks some children when it has is_child_subreaper
flag enabled they will inherit has_child_subreaper flag - first
group, when is_child_subreaper is disabled forked children will
not inherit it - second group. So child-subreaper does not reparent
all his descendants when their parents die. Having these two
differently behaving groups can lead to confusion. Also it is
a problem for CRIU, as when we restore process tree we need to
somehow determine which descendants belong to which group and
much harder - to put them exactly to these group.
To simplify these we can add a propagation of has_child_subreaper
flag on PR_SET_CHILD_SUBREAPER, walking all descendants of child-
subreaper to setup has_child_subreaper flag.
In common cases when process like systemd first sets itself to
be a child-subreaper and only after that forks its services, we will
have zero-length list of descendants to walk. Testing with binary
subtree of 2^15 processes prctl took < 0.007 sec and has shown close
to linear dependency(~0.2 * n * usec) on lower numbers of processes.
Moreover, I doubt someone intentionaly pre-forks the children whitch
should reparent to init before becoming subreaper, because some our
ancestor migh have had is_child_subreaper flag while forking our
sub-tree and our childs will all inherit has_child_subreaper flag,
and we have no way to influence it. And only way to check if we have
no has_child_subreaper flag is to create some childs, kill them and
see where they will reparent to.
Using walk_process_tree helper to walk subtree, thanks to Oleg! Timing
seems to be the same.
Optimize:
a) When descendant already has has_child_subreaper flag all his subtree
has it too already.
* for a) to be true need to move has_child_subreaper inheritance under
the same tasklist_lock with adding task to its ->real_parent->children
as without it process can inherit zero has_child_subreaper, then we
set 1 to it's parent flag, check that parent has no more children, and
only after child with wrong flag is added to the tree.
* Also make these inheritance more clear by using real_parent instead of
current, as on clone(CLONE_PARENT) if current has is_child_subreaper
and real_parent has no is_child_subreaper or has_child_subreaper, child
will have has_child_subreaper flag set without actually having a
subreaper in it's ancestors.
b) When some descendant is child_reaper, it's subtree is in different
pidns from us(original child-subreaper) and processes from other pidns
will never reparent to us.
So we can skip their(a,b) subtree from walk.
v2: switch to walk_process_tree() general helper, move
has_child_subreaper inheritance
v3: remove csr_descendant leftover, change current to real_parent
in has_child_subreaper inheritance
v4: small commit message fix
Fixes: ebec18a6d3 ("prctl: add PR_{SET,GET}_CHILD_SUBREAPER to allow simple process supervision")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add the new helper to walk the process tree, the next patch adds a user.
Note that it visits the group leaders only, proc_visitor can do
for_each_thread itself or we can trivially extend walk_process_tree() to
do this.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add the device tree entries needed to support the EMAC AXI
bus settings on the Arria10 SoCFPGA chip.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Andrew Lunn says:
====================
MV88E6390 fixes
Two patches, which have been posted before. Fix simple issues in the
mv88e6390 support. These don't need to go to stable, since the
mv88e6390 support in stable is insufficient to be usable.
To apply cleanly, these patches rely on "net: dsa: mv88e6xxx:
Workaround missing PHY".
v2: Added Reviewed-by.
Removed a redundant "the"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to enable 2.5Gbps mode, we need the base speed of 10G, plus
the Alt bit setting. Fix a typ0 that used 1Gb base speed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MV88E6390 family uses a different ATU age timer coefficient.
Fix the info structures.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 88e1545 PHYs are discrete Marvell PHYs, found in a quad package on
the zii-devel-b board. Add support for it to the Marvell PHY driver.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most likely a copy & paste error in referenced commit.
Restore the debug message to what it was before.
Fixes: f573c0b9c4 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chips like Amlogic S905GXBB are supported by this driver but don't
have support for PTP. Add a separate warning for missing HW support
to differentiate it from other actual failures.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As documented in Documentation/devicetree/bindings/net/ethernet.txt,
in RGMII_ID and RGMII_TXID mode the MAC should not add a tx delay.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This ioctl opens a file to which a socket is bound and
returns a file descriptor. The caller has to have CAP_NET_ADMIN
in the socket network namespace.
Currently it is impossible to get a path and a mount point
for a socket file. socket_diag reports address, device ID and inode
number for unix sockets. An address can contain a relative path or
a file may be moved somewhere. And these properties say nothing about
a mount namespace and a mount point of a socket file.
With the introduced ioctl, we can get a path by reading
/proc/self/fd/X and get mnt_id from /proc/self/fdinfo/X.
In CRIU we are going to use this ioctl to dump and restore unix socket.
Here is an example how it can be used:
$ strace -e socket,bind,ioctl ./test /tmp/test_sock
socket(AF_UNIX, SOCK_STREAM, 0) = 3
bind(3, {sa_family=AF_UNIX, sun_path="test_sock"}, 11) = 0
ioctl(3, SIOCUNIXFILE, 0) = 4
^Z
$ ss -a | grep test_sock
u_str LISTEN 0 1 test_sock 17798 * 0
$ ls -l /proc/760/fd/{3,4}
lrwx------ 1 root root 64 Feb 1 09:41 3 -> 'socket:[17798]'
l--------- 1 root root 64 Feb 1 09:41 4 -> /tmp/test_sock
$ cat /proc/760/fdinfo/4
pos: 0
flags: 012000000
mnt_id: 40
$ cat /proc/self/mountinfo | grep "^40\s"
40 19 0:37 / /tmp rw shared:23 - tmpfs tmpfs rw
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn says:
====================
Work around missing PHY prodcut ID in mv88e6390
The internal PHYs of the MV88E6390 have a Marvell OUI, but the product
ID is zero. Work around this by trapping reads to the ID, and if it is
zero, return the MV88E6390 family ID.
v2: Move the workaround into the central mdio read function.
Enable the temperature sensor, even though it does not work on the 6390,
but it does on the 6341, which has the same ID problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The mv88e6390 Ethernet switch has internal PHYs. These PHYs don't have
an model ID in the ID2 register. So the MDIO driver in the switch
intercepts reads to this register, and returns the switch family ID.
Extend the Marvell PHY driver by including this ID, and treat the PHY
as a 88E1540.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The internal PHYs of the mv88e6390 do not have a model ID. Trap any
calls to the ID register, and if it is zero, return the ID for the
mv88e6390. The Marvell PHY driver can then bind to this ID.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau says:
====================
mlx4: Misc bug fixes after reinitializing queues
This patchset fixes misc bugs after reinitializing
queues (e.g. by ethtool -L).
v2:
* Add another fix to mem leak in tx_ring[t] and tx_cq[t]
* In mlx4_en_try_alloc_resources(),
move all xdp_prog logic after calling mlx4_en_alloc_resources()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After calling mlx4_en_try_alloc_resources (e.g. by changing the
number of rx-queues with ethtool -L), the existing xdp_prog becomes
inactive.
The bug is that the xdp_prog ptr has not been carried over from
the old rx-queues to the new rx-queues
Fixes: 47a38e1550 ("net/mlx4_en: add support for fast rx drop bpf program")
Cc: Brenden Blanco <bblanco@plumgrid.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Kerrisk <<mtk.manpages@gmail.com> writes:
I would like to write code that discovers the namespace setup on a live
system. The NS_GET_PARENT and NS_GET_USERNS ioctl() operations added in
Linux 4.9 provide much of what I want, but there are still a couple of
small pieces missing. Those pieces are added with this patch series.
Here's an example program that makes use of the new ioctl() operations.
8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---
/* ns_capable.c
(C) 2016 Michael Kerrisk, <mtk.manpages@gmail.com>
Licensed under the GNU General Public License v2 or later.
Test whether a process (identified by PID) might (subject to LSM checks)
have capabilities in a namespace (identified by a /proc/PID/ns/xxx file).
*/
} while (0)
exit(EXIT_FAILURE); } while (0)
/* Display capabilities sets of process with specified PID */
static void
show_cap(pid_t pid)
{
cap_t caps;
char *cap_string;
caps = cap_get_pid(pid);
if (caps == NULL)
errExit("cap_get_proc");
cap_string = cap_to_text(caps, NULL);
if (cap_string == NULL)
errExit("cap_to_text");
printf("Capabilities: %s\n", cap_string);
}
/* Obtain the effective UID pf the process 'pid' by
scanning its /proc/PID/file */
static uid_t
get_euid_of_process(pid_t pid)
{
char path[PATH_MAX];
char line[1024];
int uid;
snprintf(path, sizeof(path), "/proc/%ld/status", (long) pid);
FILE *fp;
fp = fopen(path, "r");
if (fp == NULL)
errExit("fopen-/proc/PID/status");
for (;;) {
if (fgets(line, sizeof(line), fp) == NULL) {
/* Should never happen... */
fprintf(stderr, "Failure scanning %s\n", path);
exit(EXIT_FAILURE);
}
if (strstr(line, "Uid:") == line) {
sscanf(line, "Uid: %*d %d %*d %*d", &uid);
return uid;
}
}
}
int
main(int argc, char *argv[])
{
int ns_fd, userns_fd, pid_userns_fd;
int nstype;
int next_fd;
struct stat pid_stat;
struct stat target_stat;
char *pid_str;
pid_t pid;
char path[PATH_MAX];
if (argc < 2) {
fprintf(stderr, "Usage: %s PID [ns-file]\n", argv[0]);
fprintf(stderr, "\t'ns-file' is a /proc/PID/ns/xxxx file; "
"if omitted, use the namespace\n"
"\treferred to by standard input "
"(file descriptor 0)\n");
exit(EXIT_FAILURE);
}
pid_str = argv[1];
pid = atoi(pid_str);
if (argc <= 2) {
ns_fd = STDIN_FILENO;
} else {
ns_fd = open(argv[2], O_RDONLY);
if (ns_fd == -1)
errExit("open-ns-file");
}
/* Get the relevant user namespace FD, which is 'ns_fd' if 'ns_fd' refers
to a user namespace, otherwise the user namespace that owns 'ns_fd' */
nstype = ioctl(ns_fd, NS_GET_NSTYPE);
if (nstype == -1)
errExit("ioctl-NS_GET_NSTYPE");
if (nstype == CLONE_NEWUSER) {
userns_fd = ns_fd;
} else {
userns_fd = ioctl(ns_fd, NS_GET_USERNS);
if (userns_fd == -1)
errExit("ioctl-NS_GET_USERNS");
}
/* Obtain 'stat' info for the user namespace of the specified PID */
snprintf(path, sizeof(path), "/proc/%s/ns/user", pid_str);
pid_userns_fd = open(path, O_RDONLY);
if (pid_userns_fd == -1)
errExit("open-PID");
if (fstat(pid_userns_fd, &pid_stat) == -1)
errExit("fstat-PID");
/* Get 'stat' info for the target user namesapce */
if (fstat(userns_fd, &target_stat) == -1)
errExit("fstat-PID");
/* If the PID is in the target user namespace, then it has
whatever capabilities are in its sets. */
if (pid_stat.st_dev == target_stat.st_dev &&
pid_stat.st_ino == target_stat.st_ino) {
printf("PID is in target namespace\n");
printf("Subject to LSM checks, it has the following capabilities\n");
show_cap(pid);
exit(EXIT_SUCCESS);
}
/* Otherwise, we need to walk through the ancestors of the target
user namespace to see if PID is in an ancestor namespace */
for (;;) {
int f;
next_fd = ioctl(userns_fd, NS_GET_PARENT);
if (next_fd == -1) {
/* The error here should be EPERM... */
if (errno != EPERM)
errExit("ioctl-NS_GET_PARENT");
printf("PID is not in an ancestor namespace\n");
printf("It has no capabilities in the target namespace\n");
exit(EXIT_SUCCESS);
}
if (fstat(next_fd, &target_stat) == -1)
errExit("fstat-PID");
/* If the 'stat' info for this user namespace matches the 'stat'
* info for 'next_fd', then the PID is in an ancestor namespace */
if (pid_stat.st_dev == target_stat.st_dev &&
pid_stat.st_ino == target_stat.st_ino)
break;
/* Next time round, get the next parent */
f = userns_fd;
userns_fd = next_fd;
close(f);
}
/* At this point, we found that PID is in an ancestor of the target
user namespace, and 'userns_fd' refers to the immediate descendant
user namespace of PID in the chain of user namespaces from PID to
the target user namespace. If the effective UID of PID matches the
owner UID of descendant user namespace, then PID has all
capabilities in the descendant namespace(s); otherwise, it just has
the capabilities that are in its sets. */
uid_t owner_uid, uid;
if (ioctl(userns_fd, NS_GET_OWNER_UID, &owner_uid) == -1) {
perror("ioctl-NS_GET_OWNER_UID");
exit(EXIT_FAILURE);
}
uid = get_euid_of_process(pid);
printf("PID is in an ancestor namespace\n");
if (owner_uid == uid) {
printf("And its effective UID matches the owner "
"of the namespace\n");
printf("Subject to LSM checks, PID has all capabilities in "
"that namespace!\n");
} else {
printf("But its effective UID does not match the owner "
"of the namespace\n");
printf("Subject to LSM checks, it has the following capabilities\n");
show_cap(pid);
}
exit(EXIT_SUCCESS);
}
8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---8x---
Michael Kerrisk (2):
nsfs: Add an ioctl() to return the namespace type
nsfs: Add an ioctl() to return owner UID of a userns
fs/nsfs.c | 13 +++++++++++++
include/uapi/linux/nsfs.h | 9 +++++++--
2 files changed, 20 insertions(+), 2 deletions(-)
I'd like to write code that discovers the user namespace hierarchy on a
running system, and also shows who owns the various user namespaces.
Currently, there is no way of getting the owner UID of a user namespace.
Therefore, this patch adds a new NS_GET_CREATOR_UID ioctl() that fetches
the UID (as seen in the user namespace of the caller) of the creator of
the user namespace referred to by the specified file descriptor.
If the supplied file descriptor does not refer to a user namespace,
the operation fails with the error EINVAL. If the owner UID does
not have a mapping in the caller's user namespace return the
overflow UID as that appears easier to deal with in practice
in user-space applications.
-- EWB Changed the handling of unmapped UIDs from -EOVERFLOW
back to the overflow uid. Per conversation with
Michael Kerrisk after examining his test code.
Acked-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Michael Kerrisk <mtk-manpages@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
There's a weird inconsistency that flushes are mostly hidden from the
scheduler, but it needs to be aware of them in ->insert_requests().
Instead of having every scheduler call blk_mq_sched_bypass_insert(),
let's do it in the common framework.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A previous commit made the bdi embedded in the request queue
a pointer, but neglected to fixup zram. Fix it up.
Fixes: dc3b17cc8b ("block: Use pointer to backing_dev_info from request_queue")
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Christoph Hellwig pointed out that there's a potentially nasty race when
performing simultaneous nearby directio cow writes:
"Thread 1 writes a range from B to c
" B --------- C
p
"a little later thread 2 writes from A to B
" A --------- B
p
[editor's note: the 'p' denote cowextsize boundaries, which I added to
make this more clear]
"but the code preallocates beyond B into the range where thread
"1 has just written, but ->end_io hasn't been called yet.
"But once ->end_io is called thread 2 has already allocated
"up to the extent size hint into the write range of thread 1,
"so the end_io handler will splice the unintialized blocks from
"that preallocation back into the file right after B."
We can avoid this race by ensuring that thread 1 cannot accidentally
remap the blocks that thread 2 allocated (as part of speculative
preallocation) as part of t2's write preparation in t1's end_io handler.
The way we make this happen is by taking advantage of the unwritten
extent flag as an intermediate step.
Recall that when we begin the process of writing data to shared blocks,
we create a delayed allocation extent in the CoW fork:
D: --RRRRRRSSSRRRRRRRR---
C: ------DDDDDDD---------
When a thread prepares to CoW some dirty data out to disk, it will now
convert the delalloc reservation into an /unwritten/ allocated extent in
the cow fork. The da conversion code tries to opportunistically
allocate as much of a (speculatively prealloc'd) extent as possible, so
we may end up allocating a larger extent than we're actually writing
out:
D: --RRRRRRSSSRRRRRRRR---
U: ------UUUUUUU---------
Next, we convert only the part of the extent that we're actively
planning to write to normal (i.e. not unwritten) status:
D: --RRRRRRSSSRRRRRRRR---
U: ------UURRUUU---------
If the write succeeds, the end_cow function will now scan the relevant
range of the CoW fork for real extents and remap only the real extents
into the data fork:
D: --RRRRRRRRSRRRRRRRR---
U: ------UU--UUU---------
This ensures that we never obliterate valid data fork extents with
unwritten blocks from the CoW fork.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the data fork, we only allow extents to perform the following state
transitions:
delay -> real <-> unwritten
There's no way to move directly from a delalloc reservation to an
/unwritten/ allocated extent. However, for the CoW fork we want to be
able to do the following to each extent:
delalloc -> unwritten -> written -> remapped to data fork
This will help us to avoid a race in the speculative CoW preallocation
code between a first thread that is allocating a CoW extent and a second
thread that is remapping part of a file after a write. In order to do
this, however, we need two things: first, we have to be able to
transition from da to unwritten, and second the function that converts
between real and unwritten has to be made aware of the cow fork. Do
both of those things.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Perform basic sanity checking of the directory free block header
fields so that we avoid hanging the system on invalid data.
(Granted that just means that now we shutdown on directory write,
but that seems better than hanging...)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We can't handle a bmbt that's taller than BTREE_MAXLEVELS, and there's
no such thing as a zero-level bmbt (for that we have extents format),
so if we see this, send back an error code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't let anybody load an obviously bad btree pointer. Since the values
come from disk, we must return an error, not just ASSERT.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
When we open a directory, we try to readahead block 0 of the directory
on the assumption that we're going to need it soon. If the bmbt is
corrupt, the directory will never be usable and the readahead fails
immediately, so we might as well prevent the directory from being opened
at all. This prevents a subsequent read or modify operation from
hitting it and taking the fs offline.
NOTE: We're only checking for early failures in the block mapping, not
the readahead directory block itself.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We use di_format and if_flags to decide whether we're grabbing the ilock
in btree mode (btree extents not loaded) or shared mode (anything else),
but the state of those fields can be changed by other threads that are
also trying to load the btree extents -- IFEXTENTS gets set before the
_bmap_read_extents call and cleared if it fails.
We don't actually need to have IFEXTENTS set until after the bmbt
records are successfully loaded and validated, which will fix the race
between multiple threads trying to read the same directory. The next
patch strengthens directory bmbt validation by refusing to open the
directory if reading the bmbt to start directory readahead fails.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
two amd fixes.
* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl
drm/amdgpu/si: fix crash on headless asics
here's Maarten's backport of the vma fixes for v4.10.
* tag 'topic/vma-fix-for-4.10-2017-02-02' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Track pinned vma in intel_plane_state
drm/atomic: Unconditionally call prepare_fb.
The device match tables for both the xgene_enet driver and its phy driver
have forward declarations that declare an array without a length, leading
to a clang warning when they are not followed by an actual defitinition:
drivers/net/ethernet/apm/xgene/../../../phy/mdio-xgene.h:135:34: warning: tentative array definition assumed to have one element
drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element
The declarations for the mdio driver are even in a header file, so they
cause duplicate definitions of the tables for each file that includes
them.
This removes all four forward declarations and moves the actual
definitions up a little, so they are in front of their first user. For
the OF match tables, this means having to remove the #ifdef around them,
and passing the actual structure into of_match_device(). This has no
effect on the generated object code though, as the of_match_device
function has an empty stub that does not evaluate its argument, and
the symbol gets dropped either way.
Fixes: 43b3cf6634 ("drivers: net: phy: xgene: Add MDIO driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- two microcode loader fixes
- two FPU xstate handling fixes
- an MCE timer handling related crash fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make timer handling more robust
x86/microcode: Do not access the initrd after it has been freed
x86/fpu/xstate: Fix xcomp_bv in XSAVES header
x86/fpu: Set the xcomp_bv when we fake up a XSAVES area
x86/microcode/intel: Drop stashed AP patch pointer optimization
Pull perf fixes from Ingo Molnar:
"Five kernel fixes:
- an mmap tracing ABI fix for certain mappings
- a use-after-free fix, found via KASAN
- three CPU hotplug related x86 PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Make package handling more robust
perf/x86/intel/uncore: Clean up hotplug conversion fallout
perf/x86/intel/rapl: Make package handling more robust
perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory
perf/core: Fix use-after-free bug
Pull EFI fixes from Ingo Molnar:
"Two EFI boot fixes, one for arm64 and one for x86 systems with certain
firmware versions"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/fdt: Avoid FDT manipulation after ExitBootServices()
x86/efi: Always map the first physical page into the EFI pagetables
Pull objtool fix from Ingo Molnar:
"A fix for a bad opcode in objtool's instruction decoder"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix IRET's opcode
-----BEGIN PGP SIGNATURE-----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=yQ4e
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Three more miscellaneous nfsd bugfixes"
* tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux:
svcrpc: fix oops in absence of krb5 module
nfsd: special case truncates some more
NFSD: Fix a null reference case in find_or_create_lock_stateid()
- fix noMMU build on cores with MMU.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qIDo
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fix from Max Filippov:
"A for an Xtensa build error introduced in reset code refactoring
series in v4.9:
- fix noMMU build on cores with MMU"
* tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix noMMU build on cores with MMU
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1PX1
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Configure ASPM on the link from a PCI-to-PCIe bridge (avoids a NULL
pointer dereference on topologies including these bridges)"
* tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
