Flush the mmio writes before releasing spin locks.
if the maintained counts get too high > 2M force
writeback of the counts to clear them
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull crypto fixes from Herbert Xu:
"This fixes a bug in CBC/CTR on ARM64 that breaks chaining as well as a
bug in the core API that causes registration failures when a driver
unloads and then reloads an algorithm"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes
crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg
Few late fixes for this cycle
- pl330 double lock fix
- more fixes for runtime pm handling on cppi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4hDL
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A couple of fixes showed up late in the cycle so sending them up and
sending early in the week and not on Friday :).
They fix a double lock in pl330 driver and runtime pm fixes for cppi
driver"
* tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: pl330: fix double lock
dmaengine: cppi41: Clean up pointless warnings
dmaengine: cppi41: Fix oops in cppi41_runtime_resume
dmaengine: cppi41: Fix runtime PM timeouts with USB mass storage
We can get audio errors if hitting deeper idle states on omaps:
[alsa.c:230] error: Fatal problem with alsa output, error -5.
[audio.c:614] error: Error in writing audio (Input/output error?)!
This seems to happen with off mode idle enabled as power for the
whole SoC may get cut off between filling the McBSP fifo using DMA.
While active DMA blocks deeper idle states in hardware, McBSP
activity does not seem to do so.
Basing the QoS latency calculation on the FIFO size, threshold,
sample rate, and channels.
Based on the original patch by Tony Lindgren
Link: https://patchwork.kernel.org/patch/9305867/
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
IPv6 does not set the NLM_F_APPEND flag in notifications to signal that
a NEWROUTE is an append versus a new route or a replaced one. Add the
flag if the request has it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit cdba756f58 ("net: move ndo_features_check() close to
ndo_start_xmit()") inadvertently moved the doc comment for
.ndo_fix_features instead of .ndo_features_check. Fix the comment
ordering.
Fixes: cdba756f58 ("net: move ndo_features_check() close to ndo_start_xmit()")
Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In switch mode on struct cpsw_slave->ndev field will be initialized with
proper value only for the one cpsw slave port, as result
cpsw_get_usage_count() will generate "Unable to handle kernel NULL pointer
dereference" exception when first ethernet interface is opening
cpsw_ndo_open(). This issue causes boot regression on AM335x EVM and
reproducible on am57xx-evm (switch mode).
Fix it by adding additional check for !cpsw->slaves[i].ndev in
cpsw_get_usage_count().
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Fixes: 03fd01ad0e ("net: ethernet: ti: cpsw: don't duplicate ndev_running")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry reported warnings occurring in __skb_gso_segment() [1]
All SKB_GSO_DODGY producers can allow user space to feed
packets that trigger the current check.
We could prevent them from doing so, rejecting packets, but
this might add regressions to existing programs.
It turns out our SKB_GSO_DODGY handlers properly set up checksum
information that is needed anyway when packets needs to be segmented.
By checking again skb_needs_check() after skb_mac_gso_segment(),
we should remove these pesky warnings, at a very minor cost.
With help from Willem de Bruijn
[1]
WARNING: CPU: 1 PID: 6768 at net/core/dev.c:2439 skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434
lo: caps=(0x000000a2803b7c69, 0x0000000000000000) len=138 data_len=0 gso_size=15883 gso_type=4 ip_summed=0
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 6768 Comm: syz-executor1 Not tainted 4.9.0 #5
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
ffff8801c063ecd8 ffffffff82346bdf ffffffff00000001 1ffff100380c7d2e
ffffed00380c7d26 0000000041b58ab3 ffffffff84b37e38 ffffffff823468f1
ffffffff84820740 ffffffff84f289c0 dffffc0000000000 ffff8801c063ee20
Call Trace:
[<ffffffff82346bdf>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffffff82346bdf>] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
[<ffffffff81827e34>] panic+0x1fb/0x412 kernel/panic.c:179
[<ffffffff8141f704>] __warn+0x1c4/0x1e0 kernel/panic.c:542
[<ffffffff8141f7e5>] warn_slowpath_fmt+0xc5/0x100 kernel/panic.c:565
[<ffffffff8356cbaf>] skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434
[<ffffffff83585cd2>] __skb_gso_segment+0x482/0x780 net/core/dev.c:2706
[<ffffffff83586f19>] skb_gso_segment include/linux/netdevice.h:3985 [inline]
[<ffffffff83586f19>] validate_xmit_skb+0x5c9/0xc20 net/core/dev.c:2969
[<ffffffff835892bb>] __dev_queue_xmit+0xe6b/0x1e70 net/core/dev.c:3383
[<ffffffff8358a2d7>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3424
[<ffffffff83ad161d>] packet_snd net/packet/af_packet.c:2930 [inline]
[<ffffffff83ad161d>] packet_sendmsg+0x32ed/0x4d30 net/packet/af_packet.c:2955
[<ffffffff834f0aaa>] sock_sendmsg_nosec net/socket.c:621 [inline]
[<ffffffff834f0aaa>] sock_sendmsg+0xca/0x110 net/socket.c:631
[<ffffffff834f329a>] ___sys_sendmsg+0x8fa/0x9f0 net/socket.c:1954
[<ffffffff834f5e58>] __sys_sendmsg+0x138/0x300 net/socket.c:1988
[<ffffffff834f604d>] SYSC_sendmsg net/socket.c:1999 [inline]
[<ffffffff834f604d>] SyS_sendmsg+0x2d/0x50 net/socket.c:1995
[<ffffffff84371941>] entry_SYSCALL_64_fastpath+0x1f/0xc2
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is just a cleanup, no functional change.
The fixup code for 1366x768 in drm_mode_create_from_cmdline_mode() is
basically a copy of the existing code in drm_edid.c. Make the latter
code public so that it can be called from the former function.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170117164329.10551-1-tiwai@suse.de
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[vsyrjala: include drm_crtc_internal.h to make sparse happy]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
In the current version, the matchall internal state is split into two
structs: cls_matchall_head and cls_matchall_filter. This makes little
sense, as matchall instance supports only one filter, and there is no
situation where one exists and the other does not. In addition, that led
to some races when filter was deleted while packet was processed.
Unify that two structs into one, thus simplifying the process of matchall
creation and deletion. As a result, the new, delete and get callbacks have
a dummy implementation where all the work is done in destroy and change
callbacks, as was done in cls_cgroup.
Fixes: bf3994d2ed ("net/sched: introduce Match-all classifier")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow a master interface to be specified as one of the parameters when
creating a new interface via rtnl_newlink. Previously this would
require invoking interface creation, waiting for it to complete, and
then separately binding that new interface to a master.
In particular, this is used when creating a macvlan child interface for
VRRP in a VRF configuration, allowing the interface creator to specify
directly what master interface should be inherited by the child,
without having to deal with asynchronous complications and potential
race conditions.
Signed-off-by: Theuns Verwoerd <theuns.verwoerd@alliedtelesis.co.nz>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit d9c728949d ("vfio/spapr: Postpone default window creation")
added an additional exit to the VFIO_IOMMU_SPAPR_TCE_CREATE case and
made it possible to return from tce_iommu_ioctl() without unlocking
container->lock; this fixes the issue.
Fixes: d9c728949d ("vfio/spapr: Postpone default window creation")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Driver fixes only:
- One fix to the Berlin driver making the SD card work fully
again.
- One fix to the Allwinner/sunxi bias function: one premature
change needs to be partially reverted.
- The remaining four patches are to Intel embedded SoCs: baytrail
(three patches) and merrifield (one patch): register access
debounce fixes and a missing spinlock.
-----BEGIN PGP SIGNATURE-----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=Smhk
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Another week, another set of pin control fixes. The subsystem has seen
high patch-spot activity recently.
The majority of the patches are for Intel, I vaguely think it mostly
concern phones, tablets and maybe chromebooks and even laptops with
this Intel Atom family chips.
Driver fixes only:
- one fix to the Berlin driver making the SD card work fully again.
- one fix to the Allwinner/sunxi bias function: one premature change
needs to be partially reverted.
- the remaining four patches are to Intel embedded SoCs: baytrail
(three patches) and merrifield (one patch): register access
debounce fixes and a missing spinlock"
* tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler
pinctrl: baytrail: Debounce register is one per community
pinctrl: baytrail: Rectify debounce support (part 2)
pinctrl: intel: merrifield: Add missed check in mrfld_config_set()
pinctrl: sunxi: Don't enforce bias disable (for now)
pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-02-01
1) Some typo fixes, from Alexander Alemayhu.
2) Don't acquire state lock in get_mtu functions.
The only rece against a dead state does not matter.
From Florian Westphal.
3) Remove xfrm4_state_fini, it is unused for more than
10 years. From Florian Westphal.
4) Various rcu usage improvements. From Florian Westphal.
5) Properly handle crypto arrors in ah4/ah6.
From Gilad Ben-Yossef.
6) Try to avoid skb linearization in esp4 and esp6.
7) The esp trailer is now set up in different places,
add a helper for this.
8) With the upcomming usage of gro_cells in IPsec,
a gro merged skb can have a secpath. Drop it
before freeing or reusing the skb.
9) Add a xfrm dummy network device for napi. With
this we can use gro_cells from within xfrm,
it allows IPsec GRO without impact on the generic
networking code.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent commit 3439352916 ("be2net: fix MAC addr setting on privileged
BE3 VFs") allows privileged BE3 VFs to set its MAC address during
initialization. Although the initial MAC for such VFs is already
programmed by parent PF the subsequent setting performed by VF is OK,
but in certain cases (after fresh boot) this command in VF can fail.
The MAC should be initialized only when:
1) no MAC is programmed (always except BE3 VFs during first init)
2) programmed MAC is different from requested (e.g. MAC is set when
interface is down). In this case the initial MAC programmed by PF
needs to be deleted.
The adapter->dev_mac contains MAC address currently programmed in HW so
it should be zeroed when the MAC is deleted from HW and should not be
filled when MAC is set when interface is down in be_mac_addr_set() as
no programming is performed in this case.
Example of failure without the fix (immediately after fresh boot):
# ip link set eth0 up <- eth0 is BE3 PF
be2net 0000:01:00.0 eth0: Link is Up
# echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create 1 VF
...
be2net 0000:01:04.0: Emulex OneConnect(be3): VF port 0
# ip link set eth8 up <- eth8 is created privileged VF
be2net 0000:01:04.0: opcode 59-1 failed:status 1-76
RTNETLINK answers: Input/output error
# echo 0 > /sys/class/net/eth0/device/sriov_numvfs <- Delete VF
iommu: Removing device 0000:01:04.0 from group 33
...
# echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create it again
iommu: Removing device 0000:01:04.0 from group 33
...
# ip link set eth8 up
be2net 0000:01:04.0 eth8: Link is Up
Initialization is now OK.
v2 - Corrected the comment and condition check suggested by Suresh & Harsha
Fixes: 3439352916 ("be2net: fix MAC addr setting on privileged BE3 VFs")
Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ivan Vecera <cera@cera.cz>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Macro to select a clock was not correct.
Offset of enable register starts at 0x30, then calculation to select a bit is:
(@enable_reg - 0x30) / 4 * 32 + bit_to_select
Tested-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Define and enable pwm1 and pwm3 for stm32f469 discovery board
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Add Timers and it sub-nodes into DT for stm32f429 family.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
During a TLB invalidate sequence targeting the inner shareable domain,
Falkor may prematurely complete the DSB before all loads and stores using
the old translation are observed. Instruction fetches are not subject to
the conditions of this erratum. If the original code sequence includes
multiple TLB invalidate instructions followed by a single DSB, onle one of
the TLB instructions needs to be repeated to work around this erratum.
While the erratum only applies to cases in which the TLBI specifies the
inner-shareable domain (*IS form of TLBI) and the DSB is ISH form or
stronger (OSH, SYS), this changes applies the workaround overabundantly--
to local TLBI, DSB NSH sequences as well--for simplicity.
Based on work by Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
To support unprivileged users mounting filesystems two permission
checks have to be performed: a test to see if the user allowed to
create a mount in the mount namespace, and a test to see if
the user is allowed to access the specified filesystem.
The automount case is special in that mounting the original filesystem
grants permission to mount the sub-filesystems, to any user who
happens to stumble across the their mountpoint and satisfies the
ordinary filesystem permission checks.
Attempting to handle the automount case by using override_creds
almost works. It preserves the idea that permission to mount
the original filesystem is permission to mount the sub-filesystem.
Unfortunately using override_creds messes up the filesystems
ordinary permission checks.
Solve this by being explicit that a mount is a submount by introducing
vfs_submount, and using it where appropriate.
vfs_submount uses a new mount internal mount flags MS_SUBMOUNT, to let
sget and friends know that a mount is a submount so they can take appropriate
action.
sget and sget_userns are modified to not perform any permission checks
on submounts.
follow_automount is modified to stop using override_creds as that
has proven problemantic.
do_mount is modified to always remove the new MS_SUBMOUNT flag so
that we know userspace will never by able to specify it.
autofs4 is modified to stop using current_real_cred that was put in
there to handle the previous version of submount permission checking.
cifs is modified to pass the mountpoint all of the way down to vfs_submount.
debugfs is modified to pass the mountpoint all of the way down to
trace_automount by adding a new parameter. To make this change easier
a new typedef debugfs_automount_t is introduced to capture the type of
the debugfs automount function.
Cc: stable@vger.kernel.org
Fixes: 069d5ac9ae ("autofs: Fix automounts by using current_real_cred()->uid")
Fixes: aeaa4a79ff ("fs: Call d_automount with the filesystems creds")
Reviewed-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Primarily this serves as a sanity check that the bit has been cleared
before we suspend (and hasn't reappeared after resume).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170201131222.11882-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
As we now flag when the GPU signals a context-switch and do not read the
status register before we see that signal, we do not have to ensure that
it is cleared upon reset (and can leave it to the GPU to reset it from
the power context).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170201125338.12932-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
This allows the LPE HDMI driver to clean up its global variable
reference.
Also drop to pass the eld pointer because the connection status and
the ELD bytes can be retrieved from the attached pdata.
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now the pipe that is being used is passed over i915 notification, we
can re-setup the relevant register offset depending on pipe assignments
during hotplug.
This allows playback on single port machines such Zotac Pi330 or
dual-port machines such as Dell Wyse 3040 box
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Imported from legacy patches
Note: the new code doesn't assume a modified ELD but
an explicit notification that DP is present. It appears
that the i915 code does change the ELD so we could use
the ELD-based tests to check for DP audio
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The LPE audio configuration depends on the pipe, thus we need to pass
the currently used pipe. It's now embedded in struct
intel_hdmi_lpe_audio_eld as well as port id.
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pipe gets cleared to -1 for non-MST before the ELD audio
notification due to the MST audio support. This makes sense for
HD-audio that received the MST handling, but it's useless for LPE
audio. Handle the MST pipe hack conditionally only for HD-audio.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable unmute/mute amp notification. This doesn't seem to affect
HDMI support so this is done unconditionally.
An earlier version of this patch set a chicken bit at address 0x62F38
prior to the mute/unmute but this register doesn't seem to do anything
so this phase was removed.
v1->v2: Drop needless pipe A check, avoid temporary reg offset variable.
v2->v3: Add "_" prefix to VLV_AUD_PORT_EN_X_DBG as they are internal.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If DisplayPort is detected, pass flag and link rate to audio driver
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the WinSystems WS16C48.
This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the Diamond Systems
GPIO-MM. This should make it easier for users to identify which GPIO
line corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the ACCES 104-IDIO-16.
This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit "reset: make optional functions really optional" missed to
adjust one check in reset_control_put, causing a NULL pointer
access for optional resets.
Fixes: bb475230b8 "reset: make optional functions really optional"
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the ACCES 104-IDI-48.
This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch sets the gpio_chip names option with an array of GPIO line
names that match the manual documentation for the ACCES 104-DIO-48E.
This should make it easier for users to identify which GPIO line
corresponds to a respective GPIO pin on the device.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Setting driver_data was necessary to access private data in the
ws16c48_remove function. Now that the ws16c48_remove function is gone,
driver_data is no longer used. This patch removes the relevant code.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Setting driver_data was necessary to access private data in the
gpiomm_remove function. Now that the gpiomm_remove function is gone,
driver_data is no longer used. This patch removes the relevant code.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Setting driver_data was necessary to access private data in the
idio_16_remove function. Now that the idio_16_remove function is gone,
driver_data is no longer used. This patch removes the relevant code.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Setting driver_data was necessary to access private data in the
idi_48_remove function. Now that the idi_48_remove function is gone,
driver_data is no longer used. This patch removes the relevant code.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Setting driver_data was necessary to access private data in the
dio48e_remove function. Now that the dio48e_remove function is gone,
driver_data is no longer used. This patch removes the relevant code.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
New features:
. Allow configuring a 'perf ftrace' default --tracer (Taeung Song)
Infrastructure:
. Sync tools/arch/{powerpc,arm}/include/uapi/asm/kvm.h and
tools/arch/x86/include/asm/cpufeatures.h (Ingo Molnar)
. Add BPF program file system pinning APIs and respective
'perf test' entry (Joe Stringer)
. Make tools tree support 'make -s' (Josh Poimboeuf)
. Reference count maps in callchains, fixing SEGFAULT when
referencing maps after it is freed (Krister Johansen)
. Create for_each_event trace points iterator (Taeung Song)
. Do not consider an error not to have any perfconfig file
(Arnaldo Carvalho de Melo
. Propagate perf_config() errors (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=OCSZ
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.11-20170201' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Allow configuring a 'perf ftrace' default --tracer (Taeung Song)
Infrastructure changes:
- Sync tools/arch/{powerpc,arm}/include/uapi/asm/kvm.h and
tools/arch/x86/include/asm/cpufeatures.h (Ingo Molnar)
- Add BPF program file system pinning APIs and respective
'perf test' entry (Joe Stringer)
- Make tools tree support 'make -s' (Josh Poimboeuf)
- Reference count maps in callchains, fixing SEGFAULT when
referencing maps after it is freed (Krister Johansen)
- Create for_each_event trace points iterator (Taeung Song)
- Do not consider an error not to have any perfconfig file
(Arnaldo Carvalho de Melo
- Propagate perf_config() errors (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enable MIPI IO WA for BXT DSI as per bspec and
program the DSI regulators.
v2: Moved IO enable to pre-enable as per Mika's
review comments. Also reused the existing register
definition for BXT_P_CR_GT_DISP_PWRON.
v3: Added Programming the DSI regulators as per disable/enable
sequences.
v4: Restricting regulator changes to BXT as suggested by
Jani/Mika
v5: Removed redundant read/modify for regulator register as
per Jani's comment. Maintain enable/disable symmetry as per spec.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485353603-11260-1-git-send-email-vidya.srinivas@intel.com
COMPILE_TEST was wrongly placed, move it to the "depends on" line.
Also depend on COMMON_CLK as the driver now needs it to be properly
compiled.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Commit 847b8bf62eb4 ("rtc: sun6i: Expose the 32kHz oscillator") adds
a new clock for the rtc block with a 2 step probe mechanism. To share
the register region between both the clock and rtc instance, a static
pointer is used to keep the related data structure.
To preserve compatibility with the old binding, the data structure
should be saved as soon as the registers are mapped in, regardless
of the presence of the clock bindings, so that the rtc device can
retrieve it when it is probed.
This fixes the rtc device not probing when we use the updated driver
with an old device tree blob.
Fixes: 847b8bf62eb4 ("rtc: sun6i: Expose the 32kHz oscillator")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The clear of the LPTA_EN flag should be synced before writing to the
alarm register. Omitting this synchronization creates a race when
trying to change existing alarm.
Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The bq32000 includes a trickle charge circuit to maintain the charge of the
backup supply when a super capacitor is used.
You can enable the charging circuit by setting 'trickle-resistor-ohms',
additionally you can set TCFE to 1 to bypass the internal diode and boost
the charge voltage of the backup supply. You might want to enable/disable
the TCFE switch from userspace (e.g when device is only connected to a
battery)
This patch introduces a new sysfs entry to enable and disable this FET
form userspace.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
