On the Allwinner A80 SoC, the PLL lock status indicators are grouped
together in a separate register, as opposed to being scattered in each
PLL's configuration register.
Add a flag to support this.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
If the CLK_SET_RATE_PARENT flag is set, we want to try getting the
closest parent rate.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch adds support for the CLK_SET_RATE_NO_REPARENT flag to the
mux determine_rate helper, based on examples from clk-composite and
clk-mux.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The determine_rate helper used ccu_mux_helper_adjust_parent_for_prediv()
to adjust the parent_rate to account for pre-dividers, but then passed
the pristine parent clock rate from clk_hw_get_rate() to the round()
callback, thereby ignoring the pre-divider adjustment. In addition,
it was saving the adjusted parent rate back into struct
clk_rate_request.
This patch fixes this by saving the pristine parent clock rate, and
adding a copy that is adjusted and passed to the round() callback.
The pristine copy, if it is the best solution, would be saved back
to struct clk_rate_request.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Intel Gemini Lake PWM is pretty much same as used in Intel Broxton. Add
this new PCI ID to the list of supported devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PWM LPSS probe drivers just pass a pointer to the exported board
info structures to pwm_lpss_probe() based on device PCI or ACPI ID.
In order to remove the knowledge of specific devices from library part of
the driver and reduce noise in exported namespace just duplicate the
board info structures and stop exporting them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
PWM Configuration register has SW_UPDATE bit that is set when a new
configuration is written to the register. The bit is automatically
cleared at the start of the next output cycle by the IP block.
If one writes a new configuration to the register while it still has
the bit enabled, PWM may freeze. That is, while one can still write
to the register, it won't have an effect. Thus, we try to sleep long
enough that the bit gets cleared and make sure the bit is not
enabled while we update the configuration.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Richard Griffiths <richard.a.griffiths@intel.com>
Signed-off-by: Ilkka Koskinen <ilkka.koskinen@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Instead of doing things separately, which is not so reliable on some platforms,
switch the driver to use new atomic API, i.e. ->apply() callback.
The change has been tested on Intel platforms such as Broxton, BayTrail, and
Merrifield.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
A duty cycle is represented by values [0..<period>] which reflects [0%..100%].
0% of the duty cycle means always off (logical "0") on output. Allow this in
the driver.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The resolution of base_unit is derived from base_unit_bits and thus must be
equal to (2^base_unit_bits - 1). Otherwise frequency and therefore base_unit
might potentially overflow.
Prevent the above by substracting 1 in all cases where base_unit_bits or
derivative is used.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Relax the check preventing us from hotplugging into an offline node.
This limitation was added in commit 482ec7c403 ("[PATCH] powerpc numa:
Support sparse online node map") to prevent adding resources to an
uninitialized node.
These days, there is no harm in doing so. The addition will actually
cause the node to be initialized and onlined; add_memory_resource()
calls hotadd_new_pgdat() (if necessary) and node_set_online().
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The flow of the main loop in parse_numa_properties() is overly
complicated. Simplify it to be less confusing and easier to read.
No functional change.
The end of the main loop in parse_numa_properties() looks like this:
for_each_node_by_type(...) {
...
if (!condition) {
if (--ranges)
goto new_range;
else
continue;
}
statement();
if (--ranges)
goto new_range;
/* else
* continue; <- implicit, this is the end of the loop
*/
}
The only effect of !condition is to skip execution of statement(). This
can be rewritten in a simpler way:
for_each_node_by_type(...) {
...
if (condition)
statement();
if (--ranges)
goto new_range;
}
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a dummy network device so that we can
use gro_cells for IPsec GRO. With this, we handle IPsec
GRO with no impact on the generic networking code.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
With a followup patch, a gro merged skb can have a secpath.
So drop it before freeing or reusing the skb.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
There are chances that multiple CPUs can call crash_fadump() simultaneously
and would start duplicating same info to vmcoreinfo ELF note section. This
causes makedumpfile to fail during kdump capture. One example is,
triggering dumprestart from HMC which sends system reset to all the CPUs at
once.
makedumpfile --dump-dmesg /proc/vmcore
read_vmcoreinfo_basic_info: Invalid data in /tmp/vmcoreinfoyjgxlL: CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971
makedumpfile Failed.
Running makedumpfile --dump-dmesg /proc/vmcore failed (1).
makedumpfile -d 31 -l /proc/vmcore
read_vmcoreinfo_basic_info: Invalid data in /tmp/vmcoreinfo1mmVdO: CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971
makedumpfile Failed.
Running makedumpfile -d 31 -l /proc/vmcore failed (1).
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The proto VSID is built using both the MMU context id and effective
segment ID (ESID). We should not have overlapping bits between those.
That could result in us having a VSID collision. With the current code
we missed masking the top bits of the ESID. This implies for kernel
address we ended up using the top 4 bits of the ESID as part of the
proto VSID, which is wrong.
The current code use the top 4 context values (0x7fffc - 0x7ffff) for
the kernel. With those context IDs used for the kernel, we don't run
into VSID collisions because we get the same proto VSID irrespective of
whether we mask the ESID bits or not. eg:
ea = 0xf000000000000000
context = 0x7ffff
w/out masking:
proto_vsid = (0x7ffff << 6 | 0xf000000000000000 >> 40)
= (0x1ffffc0 | 0xf00000)
= 0x1ffffc0
with masking:
proto_vsid = (0x7ffff << 6 | ((0xf000000000000000 >> 40) & 0x3f))
= (0x1ffffc0 | (0xf00000 & 0x3f))
= 0x1ffffc0 | 0)
= 0x1ffffc0
So although there is no bug, the code is still overly subtle, so fix it
to save ourselves pain in future.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
1. Remove mach code for Exynos4415 as a continuation of removal
of this SoC.
2. Remove obsolete property from the bindings documentation.
-----BEGIN PGP SIGNATURE-----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=kl+X
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc
Samsung mach/soc update for v4.11, second round:
1. Remove mach code for Exynos4415 as a continuation of removal
of this SoC.
2. Remove obsolete property from the bindings documentation.
* tag 'samsung-soc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
ARM: EXYNOS: Remove Exynos4415 arch code (SoC not supported anymore)
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Use bigger reserved memory region for Multi Format Codec on all Exynos
chipsets so it could decode FullHD easily.
-----BEGIN PGP SIGNATURE-----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=E4FL
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DeviceTree update for v4.11, second round:
1. Use bigger reserved memory region for Multi Format Codec on all Exynos
chipsets so it could decode FullHD easily.
* tag 'samsung-dt-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Fix indentation of EHCI and OHCI ports
ARM: dts: exynos: Increase MFC left reserved memory region size
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add support for Exynos5433 to Power Management Unit (PMU) and Power
Domains drivers.
2. Cleanups of duplicated and unused defines.
-----BEGIN PGP SIGNATURE-----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=pXm9
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-soc-pmu-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Continuation of improvements for Exynos PM drivers for v4.11:
1. Add support for Exynos5433 to Power Management Unit (PMU) and Power
Domains drivers.
2. Cleanups of duplicated and unused defines.
* tag 'samsung-drivers-soc-pmu-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register
soc: samsung: pmu: Remove unused and duplicated defines
soc: samsung: pm_domains: Add new Exynos5433 compatible
soc: samsung: pmu: Add dummy support for Exynos5433 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the NAND framework and the Denali NAND controller driver.
This NAND controller is used on UniPhier SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the block layer support for MTD devices.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- It includes a series which adds DT bindings and PM domain driver for
PCU (Power Control Unit) block found on ZTE ZX2967 family SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjW7hAAoJEFBXWFqHsHzOCN8H/jVJo7Rnx4zwL8sx+2pjuceN
ecTTu2l9U5Nh2Y1uRqDf914rquJteDNYoe0oWz71W7UxpJMl20X3zjfso7SWDqx8
uSEgad6V/qHkgQQnLL9S9WdFQEGhfjVYvnMoVjBQEb1jpwdIm+nr8PIZ+Fqhh8u0
3OLOjXk40PvzKcYwkxqeJQajP0pE6UFUOXQesolcCr+ilTvoqqQ9chPY4Jvsc7Qf
ffC+ueSUymAhIqof2kEfy3PS5NA/ltQjokDpKjvU2+e3uJtM3qwstzt1kPCgX/d7
azOuNNdif4hT2J26qIBG5H/wS/dFEvxnA0P4J/XUwkQ4FPRpa2Er1+F+03n5sPc=
=XwPV
-----END PGP SIGNATURE-----
Merge tag 'zte-pd-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
ZTE PM domain driver support for 4.11:
- It includes a series which adds DT bindings and PM domain driver for
PCU (Power Control Unit) block found on ZTE ZX2967 family SoC.
* tag 'zte-pd-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: zte: pm_domains: Add support for zx296718
soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family
soc: zte: Add header for PM domains specifiers
MAINTAINERS: add zx2967 SoC drivers to ARM ZTE architecture
dt-bindings: zte: add bindings document for zx2967 power domain controller
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable cpufreq support for zx296718 by using new operating-points-v2
bindings, so that it works with the generic cpufreq-dt driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjW1hAAoJEFBXWFqHsHzOkYUH/RNoyrOb3+KWfy0pczLBj98F
SmF966hsGNPPKNZ+NFhqWdd1/iT9UzdIax09858HQzvyWSL7LSZNwbkHJU/2McKy
zFo71IAnMNiNti6USiKVNX0HGx9ndnCChzJBUAcum46fJ7Kt0g8zjfBZfGjRq1cQ
b3b1sJXt5P9+ebjUhrGXAykkS4zwpTHCdRAwmtKQEhU8Q5ri2+pqMtwvrt8XDfxl
vFbckTpA0byd60TGvl/HecmafpYhXvOU7QGQaknzOnlH2o5dmwf0/i7Cw0sqyQn7
JeBopKi7N2S2hN7ZlUYcEQ87FRGdf2u5WbQtcTRiYrZwvUf508hNMxGclMKUHNg=
=EYrK
-----END PGP SIGNATURE-----
Merge tag 'zte-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
ZTE arm64 device tree update for 4.11:
- Enable cpufreq support for zx296718 by using new operating-points-v2
bindings, so that it works with the generic cpufreq-dt driver.
* tag 'zte-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zx: support cpu-freq for zx296718
Signed-off-by: Olof Johansson <olof@lixom.net>
- Select wireless extensions option for imx_v6_v7_defconfig, so that
wireless works out of box with userspace tools such as 'iwconfig'.
- Enable EXT4 filesystem support for vf610m4_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjWf2AAoJEFBXWFqHsHzOSicH/Rg+X7Qat+pMxINB7+enJqlw
mIM5WTUwhO4txugFD84ybcBitC/+t/kS5ffEM7ckkDDn6p6bN0K9vcU137V/CkE2
cMHgnuawXs3qCu4D+h4X3MsdF/AWTOD20dv1W5QMhC9/kANP2emQ6ohB5Wee0Gmx
5Mi4UaD0QNYrFsukayWhQ45i0RbsNRdiyzAntIpY1Xz8JJGL/ufTk233wtfxihsV
8MQw/Ar1Q3Hz8+eIKj+9dqDKV5AUrXQ3GvrvTfwlXlLM+NNSN5UWfJsbzob9754P
h02zRhjtQfjFKTUVAJKQPTNPci8b+8InnKyLgqSNSAnb/2PXtJB0AlFXJfaZ/LM=
=VjCo
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig updates for 4.11:
- Select wireless extensions option for imx_v6_v7_defconfig, so that
wireless works out of box with userspace tools such as 'iwconfig'.
- Enable EXT4 filesystem support for vf610m4_defconfig.
* tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: vf610m4: defconfig: enable EXT4 filesystem
ARM: imx_v6_v7_defconfig: Select wireless extensions option
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add support for LS1012A SoC which is an ARMv8 SoC with single
Cortex-A53 core, and the corresponding board support: FRDM, QDS
and RDB.
- Enable TMU (Thermal Monitoring Unit) support for LS1046A SoC.
- Enable PCA9547 device for ls2080a-rdb board by removing 'disabled'
status setting.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjWZxAAoJEFBXWFqHsHzOvGQIAJpdglbg/r997PFL43gODNaU
RfF/userRtzsm3PZ9Uyf2EMg2Q66O92g9lqlr6+QNDSBuLl6iyyIomiCE3P9D/8A
IggNiTKYuEFqWQUCQL6VSoOK5Ha9sa4D23rrGoRGbfKeiiM8M/gn7gNjOAmbbZx6
VwVAAmkLObGmrkxq9IN++u7rIpTWLyOX+6wzQUYFfTD8OqGBrkpFpKOGTZXgzmeE
Q8EebPh/ti2lFjGw1lWECjI4kEXIz7TMnKFsS/fYf7o6s778JQ/uocUl2UtTon1E
aIIU72OMq6Mp/EoaMq3l9t1pgoEZMPVzyGiYPVypfEzkKTh26wb9POc6KiDO0JE=
=g8mg
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Freescale arm64 device tree updates for 4.11:
- Add support for LS1012A SoC which is an ARMv8 SoC with single
Cortex-A53 core, and the corresponding board support: FRDM, QDS
and RDB.
- Enable TMU (Thermal Monitoring Unit) support for LS1046A SoC.
- Enable PCA9547 device for ls2080a-rdb board by removing 'disabled'
status setting.
* tag 'imx-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: clockgen: Add compatible string for LS1012A
Documentation: DT: add LS1012A compatible for SCFG and DCFG
Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards
arm64: dts: ls1046a: Add TMU device tree support
arm64: dts: Add support for FSL's LS1012A SoC
arm64: dts: ls2080a-rdb: remove disable status of pca9547
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
- A patch from Alexandre to correct the mangled license text which
has been copied & pasted all over the i.MX device tree files.
- Update cpu nodes of some i.MX SoCs to make them consistent and match
ePAPR spec.
- Add OCOTP device for i.MX6UL SoC.
- Add security violation interrupt for i.MX25 DryIce.
- Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
board.
- Enable S/PDIF and 2nd display pipeline support for CompuLab board..
- Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
- A few random device addition for various boards: TVE DAC regulators
for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
i.MX6UL Engicam boards.
- Cleanups on obsoleted or unused properties.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjWLQAAoJEFBXWFqHsHzOGt0H/2WCsuRi6WU7i7Wyk/S0Xq5t
HzA/9m2f7z1vb1tzFknbpcWYa9bdofI7Dz+6KW2vp4fxhMyJn8SQxWwQjVNya2ba
z8XLdEMlIuozBebPcH84ovNzqoBIOEFahGm5smm40s/o7XL8ua9tOEFaUc+jY0Pd
n/3TPmoyBTlbrgiCZfLXCVsczHtEVW5JoQmXT7aDsxT0BQpnwLbgXKVOxgDvsWXM
WtAKjpGvdiApD3znbFjYmRKak+2uilkV5B4jrL4mZf8dxCliykP4XA/LbiMLKAMN
voMpTtTK7UYp59GrwKbqfJ+pPU7b6ndKK59f7FWrTDNgtDGe+J4ExjWwsDnuLfI=
=HAbg
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree updates for 4.11:
- New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
- A patch from Alexandre to correct the mangled license text which
has been copied & pasted all over the i.MX device tree files.
- Update cpu nodes of some i.MX SoCs to make them consistent and match
ePAPR spec.
- Add OCOTP device for i.MX6UL SoC.
- Add security violation interrupt for i.MX25 DryIce.
- Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
board.
- Enable S/PDIF and 2nd display pipeline support for CompuLab board..
- Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
- A few random device addition for various boards: TVE DAC regulators
for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
i.MX6UL Engicam boards.
- Cleanups on obsoleted or unused properties.
* tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: udoo_neo: Add Bluetooth support
ARM: dts: udoo_neo: Add Wifi support
ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support
ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
ARM: dts: vf610-zii-dev: add EEPROM entry to Rev C
ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support
ARM: dts: imx6q-utilite-pro: enable 2nd display pipeline
ARM: dts: vf610-zii-dev: Add .dts file for rev. C
ARM: dts: vf610-zii-dev-rev-b: Remove leftover PWM pingroup
ARM: dts: imx6: Support Savageboard quad
ARM: dts: imx6: Support Savageboard dual
ARM: dts: imx6: Add Savageboard common file
ARM: dts: imx53-qsb: Provide the TVE DAC regulators
ARM: dts: imx6q: Add mccmon6 board support
Doc: devicetree: bindings: Add vendor prefix entry - lwn
ARM: dts: imx/vf: Correct license text
ARM: dts: imx25.dtsi: DryIce security violation interrupt
ARM: dts: imx: Add ocotp node for imx6ul
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Remove unused flexcan and esdhc device definitions for i.MX25.
- A series from Fabio to remove camera device initialization code from
i.MX platform support, since the corresponding media driver has been
deprecated and removed from kernel tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjVZ8AAoJEFBXWFqHsHzOiW8IAKucWgP/WbNyi4AOJf7fyXts
USevVUrv5PMpeekb/EoLilYXNZaaUSnmx/zsAGfG2tBd94FPrDEFcDJLmEmBVKwO
fYxFEBddVJkT+zsXgAkffaEI447tV9Hgaxb91vqc25LKqj85uxzeo3t4YZadHO22
xFIc/hE3GDTiu0L4P0cqAE9hJl7pZGiENta0KZO6g8nvYpFvPddtfQ/GpbKGOJW1
9h/iMP4CbnTgU9pQkm/IwGopejsvWHzlCVrOPJz5Fj7B7Mrf6xQigo5ZovPnPF+m
GYp5C4wZ9oQCsIeaBLEKubgzJA+xXwp1TpzPbGdDPp5rqfsGEKfJiPnzNJK/x68=
=t+pS
-----END PGP SIGNATURE-----
Merge tag 'imx-cleanup-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
i.MX cleanup for 4.11:
- Remove unused flexcan and esdhc device definitions for i.MX25.
- A series from Fabio to remove camera device initialization code from
i.MX platform support, since the corresponding media driver has been
deprecated and removed from kernel tree.
* tag 'imx-cleanup-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: mach-mx27_3ds: Remove camera support
ARM: mach-pcm037: Remove camera support
ARM: mach-mx35_3ds: Remove camera support
ARM: mx31moboard-smartbot: Remove camera support
ARM: mx31moboard-marxbot: Remove camera support
ARM: mach-mx31_3ds: Remove camera support
ARM: imx: remove unused device definitions
Signed-off-by: Olof Johansson <olof@lixom.net>
- A couple of fixes on anatop regulator voltage and constraints
according to hardware datasheet.
- Correct FEC interrupt routing for i.MX6QP which has got the hardware
bug found on i.MX6Q fixed.
- Remove unit address from i.MX6 LDB device node to fix DTC warning.
- A fix on imx53-qsb board FEC pinmux config to remove the dependency
on firmware for setting up pins.
- A series from Sascha to fix LPSR pins for i.MX7 boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjVP+AAoJEFBXWFqHsHzOcvEIAKmxLYG5bmXkUNm+cJQ0oJde
MPh984lN1Xzx0PFlXJoC3mMC4W0RCibLjjSMS3s28ddzw0AKyAWHVkPDzUtuFQOT
s7iUjgXhfpwxeIt5DGZUXbzfZVXjRrVgWfYSMPnc2Q+PUAHQDhqTqylCTz5yF6qf
/XpN5uBaq/h++CJ+e06h9xSuIaCcEtGzLoUA+qXJBseBCLxlaR7zlt5bVL338oOt
P8LuKk8Xcmc6QstpC5HyH8XuHQ8h+Gj0tLKkFeEnLY5JFmRo6e1wOq9EPW+AHfBp
vgW5cI5cgdtn7/TuAbmCOoE052jd8oVK3LnKEfFXHxcBCDIDYz580CdbTFe06+g=
=tRE+
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-nc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX non-critical device tree fixes for 4.11:
- A couple of fixes on anatop regulator voltage and constraints
according to hardware datasheet.
- Correct FEC interrupt routing for i.MX6QP which has got the hardware
bug found on i.MX6Q fixed.
- Remove unit address from i.MX6 LDB device node to fix DTC warning.
- A fix on imx53-qsb board FEC pinmux config to remove the dependency
on firmware for setting up pins.
- A series from Sascha to fix LPSR pins for i.MX7 boards.
* tag 'imx-fixes-nc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx53-qsb-common: fix FEC pinmux config
ARM: imx6: remove unit address from LDB node
ARM: imx6qp: adapt DT to changed FEC interrupts
ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5
ARM: imx6: fix min/max voltage of anatop 2p5 regulator
ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names
ARM: dts: imx7d-cl-som: Fix OTG power pinctrl
ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmux
ARM: dts: imx7s-warp: Fix watchdog pinmux
Signed-off-by: Olof Johansson <olof@lixom.net>
- more EBI fixes
-----BEGIN PGP SIGNATURE-----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=udxv
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.11-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers
Drivers for 4.11 #2:
- more EBI fixes
* tag 'at91-ab-4.11-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
memory: atmel-ebi: Enable the SMC clock if specified
memory: atmel-ebi: Properly handle multiple reference to the same CS
memory: atmel-ebi: Fix the test to enable generic SMC logic
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add a new Armada 8K based board: MACCHIATOBin
- Enable AHCI on the Armada 7K/8K SoCs
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWIt9MyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71Zw/AJ9NEi6v2zy2
F16VJxKCgnhcJd++zwCfXA4/Z8eBtxXwsIPNLPMCTc9FtC0=
=JDKj
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.11-2' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.11 (part 2)
- Add a new Armada 8K based board: MACCHIATOBin
- Enable AHCI on the Armada 7K/8K SoCs
* tag 'mvebu-dt64-4.11-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
arm64: dts: marvell: Add DT for MACCHIATOBin board
Signed-off-by: Olof Johansson <olof@lixom.net>
Switch device tree files to the new DSA binding
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWIt8ZyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71fx4AJ4mibAO0PUJ
Hbts4+PNC5f8PMYHlQCeIDfqtqLKlfJMVH3YFasSLYmb0lo=
=PRxv
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.11 (part 2)
Switch device tree files to the new DSA binding
* tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding
ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding
ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding
ARM: dts: kirkwood-dir665: Utilize new DSA binding
ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding
ARM: dts: armada-388-clearfog: Utilize new DSA binding
ARM: dts: armada-385-linksys: Utilize new DSA binding
ARM: dts: armada-370-rd: Utilize new DSA binding
Signed-off-by: Olof Johansson <olof@lixom.net>
Cleanup up on dove pmu and mv78x00 pci
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWIt76SMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71ei+AKCfHdyZYwW1
uRXvVqdkSgOYQ8hAiwCfd2NeIfkr/7rEufrswNvqcmVc078=
=FdKA
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-4.11-1' of git://git.infradead.org/linux-mvebu into next/soc
mvebu soc for 4.11 (part 1)
Cleanup up on dove pmu and mv78x00 pci
* tag 'mvebu-soc-4.11-1' of git://git.infradead.org/linux-mvebu:
soc: dove: constify reset_control_ops structures
ARM: mv78xx0: fix possible PCI buffer overflow
Signed-off-by: Olof Johansson <olof@lixom.net>
Since v4.10-rc1, xhci is complaining in loop with :
[ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[ 801.966611] usb usb6-port1: cannot disable (err = -32)
set property "snps,dis_u3_susphy_quirk" in DT fix it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+Frf
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v4.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into fixes
STi DT fix:
Since v4.10-rc1, xhci is complaining in loop with :
[ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[ 801.966611] usb usb6-port1: cannot disable (err = -32)
set property "snps,dis_u3_susphy_quirk" in DT fix it.
* tag 'sti-dt-for-v4.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains three patches that reintroduce symbolic identifiers for
clocks, resets and mailboxes. These had been converted to literals in
the v4.10 release to avoid complicated dependencies between branches.
-----BEGIN PGP SIGNATURE-----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=eeee
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.11-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
arm64: tegra: Device tree changes for v4.11-rc1
This contains three patches that reintroduce symbolic identifiers for
clocks, resets and mailboxes. These had been converted to literals in
the v4.10 release to avoid complicated dependencies between branches.
* tag 'tegra-for-4.11-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Use symbolic reset identifiers
arm64: tegra: Use symbolic clock identifiers
arm64: tegra: Use symbolic HSP identifiers
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a set of patches that add hardware compatibility for newer
revisions of the Toradex Apalis TK1. Also included is a fix to the PAZ00
that stabilizes panel initialization on boot as well as a patch to add
card detection for the µSD card slot on TrimSlice.
To round things off there are a couple of fixes and changes to the Nyan
device tree files to fix the battery charger, add compatibility with new
revisions of Nyan Blaze and Nyan Big, as well as properly support the
TPM.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAliLDnETHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoQ8VEACrXqha5c4/lbDW1MIzD90McHHAL3U1
UtyvDp8lyOYXWMhwgraJvfHM0VVyyGsjzxn+DflKFo4LF9iro2nOOSJqeMxVIxhC
EC7kbJ1jjoc81sYTMy7oPtgMDy3eYnKzsf3Ua7mo7yFR+zQ4S1HovEF4xqOSyGfC
rPwrwvgl+KuVj4KkEY71DAqMXmuSEBRbgW03IPa1yEJhQ5KCH7gE8ox1HZBtorrl
ITf8up/YUvA/HzBhZTPjn8D65QJIH2g7ehOAlMvIfM8qshCH+mPfBNR2pVKzFP7B
r51RRpUlSriZVMXglq6cQ7zyEoGTMph3h33DLnPbYTcDGJz7ETVp/TS8sGG6YNHg
KsVmmgbS+sQGEKz1/Eq9LRv4xnQm0x2oOTRO96oD+WAs9r8csJlnSbWfQOPRgXgz
fL/X7SW229eXrejg4faxH2jVX9qWwnWua0TkUFMArmall/iFjqhFfc/0GIdVFpmU
wXXuKTtHyAHQBwgXUVe3Y3SSIHT5qS9yRMHJyaTt/c25gdgCMDtZVTyNbY05Lcv6
f3RLdJEEvm0xIPneRpF7FDZIohvlGnTidHgSp8CaJkk1KNett/DiK7N5NN6wjOVF
EZZm2tPY/nXL3pyspt0ZsZhVsp97p50rkkAKBHu+u+h2K1f39NX3Qm6886a/J/h4
ijqExw48RGedig==
=QqnB
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.11-rc1
This contains a set of patches that add hardware compatibility for newer
revisions of the Toradex Apalis TK1. Also included is a fix to the PAZ00
that stabilizes panel initialization on boot as well as a patch to add
card detection for the µSD card slot on TrimSlice.
To round things off there are a couple of fixes and changes to the Nyan
device tree files to fix the battery charger, add compatibility with new
revisions of Nyan Blaze and Nyan Big, as well as properly support the
TPM.
* tag 'tegra-for-4.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: nyan-blaze: Proper pinmux for TPM I2C
ARM: tegra: nyan-big: Proper pinmux for TPM I2C
ARM: tegra: nyan-blaze: Include compatible revisions for proper detection
ARM: tegra: nyan-big: Include compatible revisions for proper detection
ARM: tegra: nyan: Use external control for bq24735 charger
ARM: tegra: nyan: Use proper IRQ type definitions
ARM: dts: tegra: Fix missing card detection in Trimslice µSD card slot
ARM: tegra: paz00: Mark panel regulator as enabled on boot
ARM: tegra: apalis-tk1: Update compatibility comment
ARM: tegra: apalis-tk1: Fix SD card detect on v1.1 HW
ARM: tegra: apalis-tk1: Adjust pin muxing for v1.1 HW
ARM: tegra: apalis-tk1: Optional DisplayPort hot-plug detect
ARM: tegra: apalis-tk1: Pull-up temperature alert
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a single cleanup patch for the placement of the __initdata
annotation, as suggested by checkpatch.
-----BEGIN PGP SIGNATURE-----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=NF/K
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
ARM: tegra: Core SoC changes for v4.11-rc1
This contains a single cleanup patch for the placement of the __initdata
annotation, as suggested by checkpatch.
* tag 'tegra-for-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: paz00: Fix __initdata placement
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a single commit that plugs a potential device node leak in
error handling code.
-----BEGIN PGP SIGNATURE-----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=vWHP
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.11-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
memory: tegra: Changes for v4.11-rc1
This contains a single commit that plugs a potential device node leak in
error handling code.
* tag 'tegra-for-4.11-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add a missing 'of_node_put()' call
Signed-off-by: Olof Johansson <olof@lixom.net>
r8a779[56] SoCs:
* Mark EthernetAVB device node disabled in DT for r8a779[56] SoCs
- They are enabled as appropriate in board DT files
* Link ARM GIC to clock and clock domain on r8a779[56] SoCs
* Add thermal support
r8a7795 SoC:
* Tidyup audma definition order on r8a7795 SoC
* Add missing power-domains property for SATA
r8a7795/h3ulcb board:
* Add MIX/CTU support as per support present in DT for r8a7796
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KG8o
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Second Round of Renesas ARM64 Based SoC DT Updates for v4.11
r8a779[56] SoCs:
* Mark EthernetAVB device node disabled in DT for r8a779[56] SoCs
- They are enabled as appropriate in board DT files
* Link ARM GIC to clock and clock domain on r8a779[56] SoCs
* Add thermal support
r8a7795 SoC:
* Tidyup audma definition order on r8a7795 SoC
* Add missing power-domains property for SATA
r8a7795/h3ulcb board:
* Add MIX/CTU support as per support present in DT for r8a7796
* tag 'renesas-arm64-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a7796: Mark EthernetAVB device node disabled
arm64: dts: r8a7795: Mark EthernetAVB device node disabled
arm64: dts: r8a7795: tidyup audma definition order
arm64: dts: r8a7796: Link ARM GIC to clock and clock domain
arm64: dts: r8a7795: Link ARM GIC to clock and clock domain
arm64: dts: r8a7796: Add R-Car Gen3 thermal support
arm64: dts: r8a7795: Add R-Car Gen3 thermal support
arm64: dts: r8a7795: Add missing power-domains property for sata
arm64: dts: h3ulcb: follow sound CTU/MIX supports
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the DMA on sama5d2 and sama5d4 xplained to fix an issue seen by
kernelci
-----BEGIN PGP SIGNATURE-----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=MsBR
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.11-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
DT for 4.11 #2:
- Enable the DMA on sama5d2 and sama5d4 xplained to fix an issue seen by
kernelci
* tag 'at91-ab-4.11-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: Enable DMA on sama5d2_xplained console
ARM: dts: at91: Enable DMA on sama5d4_xplained console
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add more register documentation to R-Car Gen2 PM
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WcAl
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Second Round of Renesas ARM Based SoC Updates for v4.11
* Add more register documentation to R-Car Gen2 PM
* tag 'renesas-soc2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: rcar-gen2: Add more register documentation
Signed-off-by: Olof Johansson <olof@lixom.net>
Enhancements:
* Add power-domains to mmcif on r7s72100 SoC
* Add OSTM to rskrza1/r7s72100
* Link ARM GIC to clock and clock domain on r8a774[35] SoCs
Clean-up:
* Correct SATA device status on r8a7779/marzen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYicoiAAoJENfPZGlqN0+++P8P/REww60pI3KHlxzdU/WeMfMi
VEyQCKXJ4x9HVNubJ1f9w8aJBYqSFLCJulYqk4yu1LZJNmTqqD/Z1xtk382z6vmr
uDW3JUj5Vn8kX5FmobN8boU/al4ozildB6Z2r6blnhwC1w3/fZnY88U4PHnKZ9Y2
dJDaYUsjPawf81vJu68MzyEkOXQBfrWrxGr0wdngdOY1BE0ahL7tMvPy3uAtXVC3
YWSJXf25cxiDzDRbmnpMe1dz5nziOq9juaPnDiJCIi8L0Cuf1ZYpvLV2nzrA0MC2
hX+aF94CH8niZW74FMWa8ijjuq7BbgDla9G0R37St29D7/C4c+1mI2cy3qUeJBAn
PKNj+Cmjvrdg/4dFU2X5NaufDXE+wbjsZ8I07iftqhkH6c0EZle6adhAVSlLAQHo
Kk7PRKvTLQV3YsItlW41w0Q13jfkBhtnW3SQtTYQDY88omHytcrM5/EqLdfQxNzQ
6IEUjPuBLLufHfXL0OADAVFitOB6djT5qZDJcGFOcZ1Bh8Fx4+zY2kCpcIi/tAl1
s66kkG8QUiekl0hYcIfviFhkksYmIGVLIrQ17cSB31FCf9jR6b3zUkpPWZChXHDc
jReosGFSfvbxiTdllDyKrDW8CuMaFsc9K/HVMcsRDUwUcCvTdTDF2MruQ5svChyL
axMDOW4cOiSqMko0i4lQ
=5/D6
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.11
Enhancements:
- Add power-domains to mmcif on r7s72100 SoC
- Add OSTM to rskrza1/r7s72100
- Link ARM GIC to clock and clock domain on r8a774[35] SoCs
Clean-up:
- Correct SATA device status on r8a7779/marzen
* tag 'renesas-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r7s72100: add power-domains to mmcif
ARM: dts: rskrza1: add ostm DT support
ARM: dts: r7s72100: add ostm to device tree
ARM: dts: r7s72100: add ostm clock to device tree
ARM: dts: r8a7745: Link ARM GIC to clock and clock domain
ARM: dts: r8a7743: Link ARM GIC to clock and clock domain
ARM: dts: r8a7779, marzen: Fix sata device status
Signed-off-by: Olof Johansson <olof@lixom.net>
When setting a 2MB pte, radix__map_kernel_page() is using the address
ptep = (pte_t *)pudp;
Fix this conversion to use pmdp instead. Use pmdp_ptep() to do this
instead of casting the pointer.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Cc: stable@vger.kernel.org # v4.7+
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since we moved the cdb parts and define out of the block proper,
we need to include scsi/scsi_request.h for the nvme scsi layer.
Fixes: 82ed4db499 ("block: split scsi_request out of struct request")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
This cycle is a minor fixes one, covering :
- build fixes from Arnd, mainly include related
- transfer of maintainance of Motorala phone to Robert
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Z3AX
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.11' of https://github.com/rjarzmik/linux into next/soc
This is the pxa changes for v4.11 cycle.
This cycle is a minor fixes one, covering :
- build fixes from Arnd, mainly include related
- transfer of maintainance of Motorala phone to Robert
* tag 'pxa-for-4.11' of https://github.com/rjarzmik/linux:
MAINTAINERS: transfer maintainership for the EZX platform
ARM: pxa: include linux/leds.h
ARM: pxa: ezx: fix a910 camera data
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the Cadence SD/SDIO/eMMC controller. This is used on
Socionext UniPhier SoC family.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Drop the declaration of the unimplemented hip01_cpu_die
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYiNOBAAoJEAvIV27ZiWZcmkIP/jiTcu/KpJDKbhsf04QKvlNr
lHxcH+PuBpvp33Emw2b17dyKqRq5+74LtxShxVIW3KLBipi1w9dsHhlFc1QfnFNb
lxZNvhIOWJshHsnu9Xn23Vbari1cxcpoEZe1R+6ij20UXdg282C7Zj3Hg8oHa5oB
eCGgoSxwnEqh55MmUOTSh+7GG1eSK/MExjZAI/nT8NUu2JIhLopAXCMJVZu3tUUz
BEOrz+76WC3KWkG7aFdBu10/7qRT++Wh2jirguxCEXo9SxaUs1i7G1DGzhy8N9oh
Vs2EKNdYTeKu9IMJAx2RFEcxEusc+oAfTLQBQCSQFaKYKp+K+ZZ3pKF6E7LT1AyL
Sz/xQETtWNjETgE5YVXwfHUlZOB7k9/2q/SoL9gqbQ+302Que1U6a+i747ZLmYH9
/N7HS1WLMLIGGvcp7X/iMwBqZAnVY+vi7KNiqGzRd2YYRnJ/L44fTbEIB/Ve5tvT
vj81yKTLx228VJM9IB0F2Sz6KXsJeW2TcNk2sF88TfGx80FTmxFfdK1lHNQXQWcu
4aRG2o2np3PFXCn1pGW1KoVvvhhnzFRcXQSXlRQTOcc/SBOK9E1hOCvEf3eG0cdj
TSRLbvlg2Gs7BdX8O4axNoN9nbXD1MvF6yuAgbxdavgJGUx72Eq7J7ebzUXNFwTh
nxhqaOtpmPyigm8aS2nb
=XY+A
-----END PGP SIGNATURE-----
Merge tag 'hisi-armv7-soc-for-4.11' of git://github.com/hisilicon/linux-hisi into next/soc
ARM: mach-hisi: Hisilicon SoC updates for 4.11
- Drop the declaration of the unimplemented hip01_cpu_die
* tag 'hisi-armv7-soc-for-4.11' of git://github.com/hisilicon/linux-hisi:
arm: hisi: drop extern hip01_cpu_die
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable ARM_SMMU_V3 in the arm64 defconfig
- Enable NUMA and NUMA_BALANCING in the arm64 defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7Xif
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.11' of git://github.com/hisilicon/linux-hisi into next/defconfig
ARM64: hisilicon: defconfig updates for 4.11
- Enable ARM_SMMU_V3 in the arm64 defconfig
- Enable NUMA and NUMA_BALANCING in the arm64 defconfig
* tag 'hisi-defconfig-for-4.11' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable NUMA and NUMA_BALANCING
arm64: defconfig: enable SMMUv3 config
Signed-off-by: Olof Johansson <olof@lixom.net>
