Verify that profiles in a load set specify the same policy ns and
audit the name of the policy ns that policy is being loaded for.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Store loaded policy and allow introspecting it through apparmorfs. This
has several uses from debugging, policy validation, and policy checkpoint
and restore for containers.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Policy management will be expanded beyond traditional unconfined root.
This will require knowning the profile of the task doing the management
and the ns view.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Prepare for a tighter pairing of user namespaces and apparmor policy
namespaces, by making the ns to be viewed available.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Prepare for a tighter pairing of user namespaces and apparmor policy
namespaces, by making the ns to be viewed available and checking
that the user namespace level is the same as the policy ns level.
This strict pairing will be relaxed once true support of user namespaces
lands.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add support for new codec of ALC1220.
It's compatible with ALC882 & co.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Borrow the special null device file from selinux to "close" fds that
don't have sufficient permissions at exec time.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Commit 9f834ec18d ("binfmt_elf: switch to new creds when switching to new mm")
changed when the creds are installed by the binfmt_elf handler. This
affects which creds are used to mmap the executable into the address
space. Which can have an affect on apparmor policy.
Add a flag to apparmor at
/sys/kernel/security/apparmor/features/domain/fix_binfmt_elf_mmap
to make it possible to detect this semantic change so that the userspace
tools and the regression test suite can correctly deal with the change.
BugLink: http://bugs.launchpad.net/bugs/1630069
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of testing whether a given dfa exists in every code path, have
a default null dfa that is used when loaded policy doesn't provide a
dfa.
This will let us get rid of special casing and avoid dereference bugs
when special casing is missed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Newer policy will combine the file and policydb dfas, allowing for
better optimizations. However to support older policy we need to
keep the ability to address the "file" dfa separately. So dup
the policydb as if it is the file dfa and set the appropriate start
state.
Signed-off-by: John Johansen <john.johansen@canonical.com>
The dfa is currently setup to be shared (has the basis of refcounting)
but currently can't be because the count can't be increased.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Newer policy encodes more than just version in the version tag,
so add masking to make sure the comparison remains correct.
Note: this is fully compatible with older policy as it will never set
the bits being masked out.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When possible its better to name a learning profile after the missing
profile in question. This allows for both more informative names and
for profile reuse.
Signed-off-by: John Johansen <john.johansen@canonical.com>
prepare_ns() will need to be called from alternate views, and namespaces
will need to be created via different interfaces. So refactor and
allow specifying the view ns.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Rename to indicate the test is only about whether path mediation is used,
not whether other types of mediation might be used.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Uninitialized char* causes a sparse build-warning, fix it up by
initializing it to NULL.
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
USBTrdTim must be programmed to 0x5 when phy has a UTMI+ 16-bit wide
interface or 0x9 when it has a 8-bit wide interface.
GUSBCFG reset value (Value After Reset: 0x1400) sets USBTrdTim to 0x5.
In case of 8-bit UTMI+, without clearing GUSBCFG.USBTRDTIM mask, USBTrdTim
results in 0xD (0x5 | 0x9).
That's why we need to clear GUSBCFG.USBTRDTIM mask before setting USBTrdTim
value, to ensure USBTrdTim is correctly set in case of 8-bit UTMI+.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Policy namespaces will be diverging from profile management and
expanding so put it in its own file.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Dan reports following smatch warning:
net/xfrm/xfrm_state.c:659
error: we previously assumed 'afinfo' could be null (see line 651)
649 struct xfrm_state_afinfo *afinfo = xfrm_state_afinfo_get_rcu(family);
651 if (afinfo)
...
658 }
659 afinfo->init_temprop(x, tmpl, daddr, saddr);
I am resonably sure afinfo cannot be NULL here.
xfrm_state4.c and state6.c are both part of ipv4/ipv6 (depends on
CONFIG_XFRM, a boolean) but even if ipv6 is a module state6.c can't
be removed (ipv6 lacks module_exit so it cannot be removed).
The only callers for xfrm6_fini that leads to state backend unregister
are error unwinding paths that can be called during ipv6 init function.
So after ipv6 module is loaded successfully the state backend cannot go
away anymore.
The family value from policy lookup path is taken from dst_entry, so
that should always be AF_INET(6).
However, since this silences the warning and avoids readers of this
code wondering about possible null deref it seems preferrable to
be defensive and just add the old check back.
Fixes: 711059b975 ("xfrm: add and use xfrm_state_afinfo_get_rcu")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull an urgent RCU fix from Paul E. McKenney:
"This series contains a pair of commits that permit RCU synchronous grace
periods (synchronize_rcu() and friends) to work correctly throughout boot.
This eliminates the current "dead time" starting when the scheduler spawns
its first taks and ending when the last of RCU's kthreads is spawned
(this last happens during early_initcall() time). Although RCU's
synchronous grace periods have long been documented as not working
during this time, prior to 4.9, the expedited grace periods worked by
accident, and some ACPI code came to rely on this unintentional behavior.
(Note that this unintentional behavior was -not- reliable. For example,
failures from ACPI could occur on !SMP systems and on systems booting
with the rcu_normal kernel boot parameter.)
Either way, there is a bug that needs fixing, and the 4.9 switch of RCU's
expedited grace periods to workqueues could be considered to have caused
a regression. This series therefore makes RCU's expedited grace periods
operate correctly throughout the boot process. This has been demonstrated
to fix the problems ACPI was encountering, and has the added longer-term
benefit of simplifying RCU's behavior."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After we already allocated the jit.prg_buf image via
bpf_jit_binary_alloc() and filled it out with instructions,
jit.prg_buf cannot be NULL anymore. Thus, remove the
unnecessary check. Tested on s390x with test_bpf module.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This is a leftover from the 31 bit era to avoid 64 bit divisions.
Get rid of it.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
