Move the uart nodes over to use the label form to reference the serial
devices, rather than replicating the device node path.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Move the ethernet, buffer manager, and mdio nodes over to use label form
to reference the devices rather than replicating the device path.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Move the I2C nodes over to use the label form to reference the I2C
controllers, rather than replicating the device node path.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Move the device specific pinctrl nodes over to use the label form to
reference the pin mux controller, rather than replicating the device
node path.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the DTS file to describe the clearfog pro model - we update the
platform name and compatible string compared to the original version.
The original version remains for compatibility for the time being as
the name of the file has become established, and the machine name
and/or compatible may be used by userspace.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the DTS file to describe the clearfog base model.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
There are literally dozens of Insyde devices with a different
name but with the same audio routing. Use a generic quirk to
match on vendor name only to avoid recurring edits of the
same thing.
Signed-off-by: youling257 <youling257@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Frequency value of zero did not make sense, use same 24.576MHz
setting and only change the clock source in idle mode
Suggested-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the clock tree definition for the new rk3328 SoC.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The DAI ID defines are back from the time when DAIs were referenced by a
numerical ID. These days a string is used instead and the defines are
unused. The last user of these defines was removed in commit f0fba2ad1b
("ASoC: multi-component - ASoC Multi-Component Support"). So remove the
defines as well.
This also means the pxa2xx-ac97.h file no longer has any content and can be
removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> (for mioa701_wm9713)
Signed-off-by: Mark Brown <broonie@kernel.org>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
implement sctp_error to let nf_conntrack_in validate crc32c on the packet
transport header. Assign skb->ip_summed to CHECKSUM_UNNECESSARY and return
NF_ACCEPT in case of successful validation; otherwise, return -NF_ACCEPT to
let netfilter skip connection tracking, like other protocols do.
Besides preventing corrupted packets from matching conntrack entries, this
fixes functionality of REJECT target: it was not generating any ICMP upon
reception of SCTP packets, because it was computing RFC 1624 checksum on
the packet and systematically mismatching crc32c in the SCTP header.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_conntrack needs to compute crc32c when dealing with SCTP packets.
Moreover, NF_NAT_PROTO_SCTP (currently selecting LIBCRC32C) can be enabled
only if conntrack support for SCTP is enabled. Therefore, move enabling of
kernel support for crc32c so that it is selected when NF_CT_PROTO_SCTP=y.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Adjust regs property for the FPGA manager data register to
properly reflect that it is a single 32 bit register.
Signed-off-by: Dalon Westergreen <dwesterg@altera.com>
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add devicetree bindings for Rockchip cru which found on
Rockchip SoCs.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the dt-bindings header for the rk3328, that gets shared between
the clock controller and the clock references in the dts.
Add softreset ID for rk3328.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Regenerate the parser after d920f7c662 ("genksyms: Fix segfault with
invalid declarations").
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Do not try to recover too early and segfault when parsing invalid
declarations such as
echo 'int (int);' | scripts/genksyms/genksyms
echo 'int a, (int);' | scripts/genksyms/genksyms
echo 'extern void *__inline_memcpy((void *), (const void *), (__kernel_size_t));' | scripts/genksyms/genksyms
The last one was a real-life bug with
include/asm-generic/asm-prototypes.h on x86_64.
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
The supported band structure contains the band is applies to
so no need to pass it separately. Also added a default case
to the switch for completeness. The current code base does not
call this function with NUM_NL80211_BANDS but kept that case
statement although default case would cover that.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The asm-prototypes.h file is used to provide dummy function declarations
for genksyms, when processing asm files with EXPORT_SYMBOL. Make sure
that any architecture defines get out of our way. x86 currently has an
issue with memcpy on 64bit with CONFIG_KMEMCHECK=y and with
memset/__memset on 32bit:
$ cat init/test.c
#include <asm/asm-prototypes.h>
$ make -s init/test.o
In file included from ./arch/x86/include/asm/string.h:4:0,
from ./include/linux/string.h:18,
from ./include/linux/bitmap.h:8,
from ./include/linux/cpumask.h:11,
from ./arch/x86/include/asm/cpumask.h:4,
from ./arch/x86/include/asm/msr.h:10,
from ./arch/x86/include/asm/processor.h:20,
from ./arch/x86/include/asm/cpufeature.h:4,
from ./arch/x86/include/asm/thread_info.h:52,
from ./include/linux/thread_info.h:25,
from ./arch/x86/include/asm/preempt.h:6,
from ./include/linux/preempt.h:59,
from ./include/linux/spinlock.h:50,
from ./include/linux/seqlock.h:35,
from ./include/linux/time.h:5,
from ./include/uapi/linux/timex.h:56,
from ./include/linux/timex.h:56,
from ./include/linux/sched.h:19,
from ./include/linux/uaccess.h:4,
from ./arch/x86/include/asm/asm-prototypes.h:2,
from init/test.c:1:
./arch/x86/include/asm/string_64.h:52:47: error: expected declaration specifiers or ‘...’ before ‘(’ token
#define memcpy(dst, src, len) __inline_memcpy((dst), (src), (len))
./include/asm-generic/asm-prototypes.h:6:14: note: in expansion of macro ‘memcpy’
extern void *memcpy(void *, const void *, __kernel_size_t);
^
...
During real build, this manifests itself by genksyms segfaulting.
Fixes: 334bb77387 ("x86/kbuild: enable modversions for symbols exported from asm")
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Michal Marek <mmarek@suse.com>
Show a call's hard-ACK cursors in /proc/net/rxrpc_calls so that a call's
progress can be more easily monitored.
Signed-off-by: David Howells <dhowells@redhat.com>
Add the following extra tracing information:
(1) Modify the rxrpc_transmit tracepoint to record the Tx window size as
this is varied by the slow-start algorithm.
(2) Modify the rxrpc_rx_ack tracepoint to record more information from
received ACK packets.
(3) Add an rxrpc_rx_data tracepoint to record the information in DATA
packets.
(4) Add an rxrpc_disconnect_call tracepoint to record call disconnection,
including the reason the call was disconnected.
(5) Add an rxrpc_improper_term tracepoint to record implicit termination
of a call by a client either by starting a new call on a particular
connection channel without first transmitting the final ACK for the
previous call.
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the way enum values are translated into strings in AF_RXRPC
tracepoints. The problem with just doing a lookup in a normal flat array
of strings or chars is that external tracing infrastructure can't find it.
Rather, TRACE_DEFINE_ENUM must be used.
Also sort the enums and string tables to make it easier to keep them in
order so that a future patch to __print_symbolic() can be optimised to try
a direct lookup into the table first before iterating over it.
A couple of _proto() macro calls are removed because they refered to tables
that got moved to the tracing infrastructure. The relevant data can be
found by way of tracing.
Signed-off-by: David Howells <dhowells@redhat.com>
A single netlink socket might own multiple interfaces *and* a
scheduled scan request (which might belong to another interface),
so when it goes away both may need to be destroyed.
Remove the schedule_scan_stop indirection to fix this - it's only
needed for interface destruction because of the way this works
right now, with a single work taking care of all interfaces.
Cc: stable@vger.kernel.org
Fixes: 93a1e86ce1 ("nl80211: Stop scheduled scan if netlink client disappears")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't return from the open() call on the crc/data file until the HW has
produced a first frame, as there's great variability in when the HW is
able to do that and userspace shouldn't have to guess when this specific
HW is ready to start giving frame CRCs.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170102125912.22305-3-tomeu.vizoso@collabora.com
There's no reason any more for callers of this function to take the lock
themselves, so just move the lock to the function to avoid confusion and
bugs when more callers are contributed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170102125912.22305-2-tomeu.vizoso@collabora.com
SYSRET to a noncanonical address will blow up on Intel CPUs. Linux
needs to prevent this from happening in two major cases, and the
criteria will become more complicated when support for larger virtual
address spaces is added.
A fast-path SYSCALL will fall through to the following instruction
using SYSRET without any particular checking. To prevent fall-through
to a noncanonical address, Linux prevents the highest canonical page
from being mapped. This test case checks a variety of possible maximum
addresses to make sure that either we can't map code there or that
SYSCALL fall-through works.
A slow-path system call can return anywhere. Linux needs to make sure
that, if the return address is non-canonical, it won't use SYSRET.
This test cases causes sigreturn() to return to a variety of addresses
(with RCX == RIP) and makes sure that nothing explodes.
Some of this code comes from Kirill Shutemov.
Kirill reported the following output with 5-level paging enabled:
[RUN] sigreturn to 0x800000000000
[OK] Got SIGSEGV at RIP=0x800000000000
[RUN] sigreturn to 0x1000000000000
[OK] Got SIGSEGV at RIP=0x1000000000000
[RUN] sigreturn to 0x2000000000000
[OK] Got SIGSEGV at RIP=0x2000000000000
[RUN] sigreturn to 0x4000000000000
[OK] Got SIGSEGV at RIP=0x4000000000000
[RUN] sigreturn to 0x8000000000000
[OK] Got SIGSEGV at RIP=0x8000000000000
[RUN] sigreturn to 0x10000000000000
[OK] Got SIGSEGV at RIP=0x10000000000000
[RUN] sigreturn to 0x20000000000000
[OK] Got SIGSEGV at RIP=0x20000000000000
[RUN] sigreturn to 0x40000000000000
[OK] Got SIGSEGV at RIP=0x40000000000000
[RUN] sigreturn to 0x80000000000000
[OK] Got SIGSEGV at RIP=0x80000000000000
[RUN] sigreturn to 0x100000000000000
[OK] Got SIGSEGV at RIP=0x100000000000000
[RUN] sigreturn to 0x200000000000000
[OK] Got SIGSEGV at RIP=0x200000000000000
[RUN] sigreturn to 0x400000000000000
[OK] Got SIGSEGV at RIP=0x400000000000000
[RUN] sigreturn to 0x800000000000000
[OK] Got SIGSEGV at RIP=0x800000000000000
[RUN] sigreturn to 0x1000000000000000
[OK] Got SIGSEGV at RIP=0x1000000000000000
[RUN] sigreturn to 0x2000000000000000
[OK] Got SIGSEGV at RIP=0x2000000000000000
[RUN] sigreturn to 0x4000000000000000
[OK] Got SIGSEGV at RIP=0x4000000000000000
[RUN] sigreturn to 0x8000000000000000
[OK] Got SIGSEGV at RIP=0x8000000000000000
[RUN] Trying a SYSCALL that falls through to 0x7fffffffe000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x7ffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x800000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0xfffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x1000000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x1fffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x2000000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x3fffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x4000000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x7fffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x8000000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0xffffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x10000000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x1ffffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x20000000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x3ffffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x40000000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x7ffffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x80000000000000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0xfffffffffff000
[OK] We survived
[RUN] Trying a SYSCALL that falls through to 0x100000000000000
[OK] mremap to 0xfffffffffff000 failed
[RUN] Trying a SYSCALL that falls through to 0x1fffffffffff000
[OK] mremap to 0x1ffffffffffe000 failed
[RUN] Trying a SYSCALL that falls through to 0x200000000000000
[OK] mremap to 0x1fffffffffff000 failed
[RUN] Trying a SYSCALL that falls through to 0x3fffffffffff000
[OK] mremap to 0x3ffffffffffe000 failed
[RUN] Trying a SYSCALL that falls through to 0x400000000000000
[OK] mremap to 0x3fffffffffff000 failed
[RUN] Trying a SYSCALL that falls through to 0x7fffffffffff000
[OK] mremap to 0x7ffffffffffe000 failed
[RUN] Trying a SYSCALL that falls through to 0x800000000000000
[OK] mremap to 0x7fffffffffff000 failed
[RUN] Trying a SYSCALL that falls through to 0xffffffffffff000
[OK] mremap to 0xfffffffffffe000 failed
[RUN] Trying a SYSCALL that falls through to 0x1000000000000000
[OK] mremap to 0xffffffffffff000 failed
[RUN] Trying a SYSCALL that falls through to 0x1ffffffffffff000
[OK] mremap to 0x1fffffffffffe000 failed
[RUN] Trying a SYSCALL that falls through to 0x2000000000000000
[OK] mremap to 0x1ffffffffffff000 failed
[RUN] Trying a SYSCALL that falls through to 0x3ffffffffffff000
[OK] mremap to 0x3fffffffffffe000 failed
[RUN] Trying a SYSCALL that falls through to 0x4000000000000000
[OK] mremap to 0x3ffffffffffff000 failed
[RUN] Trying a SYSCALL that falls through to 0x7ffffffffffff000
[OK] mremap to 0x7fffffffffffe000 failed
[RUN] Trying a SYSCALL that falls through to 0x8000000000000000
[OK] mremap to 0x7ffffffffffff000 failed
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e70bd9a3f90657ba47b755100a20475d038fa26b.1482808435.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The conversion of Intel PMU drivers into modules did not include reference
counting. The machine will crash when attempting to access deleted code
if an event from a module PMU is started and the module removed before the
event is destroyed.
i.e. this crashes the machine:
$ insmod intel-rapl-perf.ko
$ perf stat -e power/energy-cores/ -C 0 &
$ rmmod intel-rapl-perf.ko
Set THIS_MODULE to pmu->module in Intel module PMUs so that generic code
can handle reference counting and deny rmmod while an event still exists.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1482455860-116269-1-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current implementation supports only Intel Merrifield platforms. Don't mess
with the rest of the Intel MID family by not registering device with wrong
properties.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170102092450.87229-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The proper spelling of Anniedale SoC with 'e' in the middle. Fix typo in the
comment line in intel-family.h header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170102092229.87036-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit a5ad0fd852.
It results in kconfing complaining about recursive depencies:
drivers/usb/Kconfig:39:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/input/mouse/Kconfig:187: symbol MOUSE_APPLETOUCH depends on INPUT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/input/Kconfig:8: symbol INPUT is selected by VT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/tty/Kconfig:12: symbol VT is selected by FB_STI
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:678: symbol FB_STI depends on FB
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:72: symbol DRM_KMS_FB_HELPER is selected by DRM_KMS_CMA_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:128: symbol DRM_KMS_CMA_HELPER is selected by DRM_HDLCD
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/arm/Kconfig:6: symbol DRM_HDLCD depends on COMMON_CLK
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/clk/Kconfig:9: symbol COMMON_CLK is selected by X86_INTEL_QUARK
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:554: symbol X86_INTEL_QUARK depends on X86_PLATFORM_DEVICES
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/platform/x86/Kconfig:5: symbol X86_PLATFORM_DEVICES is selected by DRM_NOUVEAU
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/nouveau/Kconfig:1: symbol DRM_NOUVEAU depends on LEDS_CLASS
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/leds/Kconfig:16: symbol LEDS_CLASS is selected by ATH9K_HTC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/net/wireless/ath/ath9k/Kconfig:158: symbol ATH9K_HTC depends on USB
warning: (DRM_NOUVEAU && DRM_I915 && DRM_GMA500) selects ACPI_VIDEO which has unmet direct dependencies (ACPI && X86 &&
+BACKLIGHT_CLASS_DEVICE && INPUT)
And there's apparently a better patch available already.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
A negative number can be specified in the cmdline which will be used as
setup_clear_cpu_cap() argument. With that we can clear/set some bit in
memory predceeding boot_cpu_data/cpu_caps_cleared which may cause kernel
to misbehave. This patch adds lower bound check to setup_disablecpuid().
Boris Petkov reproduced a crash:
[ 1.234575] BUG: unable to handle kernel paging request at ffffffff858bd540
[ 1.236535] IP: memcpy_erms+0x6/0x10
Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andi.kleen@intel.com
Cc: bp@alien8.de
Cc: dave.hansen@linux.intel.com
Cc: luto@kernel.org
Cc: slaoub@gmail.com
Fixes: ac72e7888a ("x86: add generic clearcpuid=... option")
Link: http://lkml.kernel.org/r/1482933340-11857-1-git-send-email-lukasz.odzioba@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 6b7e95d133. This commit
is based on a concern about value of the given parameter. It's expected
to be ORed value with some enumeration-constants, thus often it can not be
one of the enumeration-constants. I understood that this is out of
specification and causes implementation-dependent issues.
In C language specification, enumerated type can be interpreted as an
integer type, in which all of enumeration-constants in corresponding
enumerator-list can be stored. Implementations can select one of char,
signed int and unsigned int as its type, and this selection is
implementation-dependent.
In GCC, a signed integer is selected when at least one of
enumeration-constants has negative value, else an unsigned integer is
selected. This behaviour can be switched by -fshort-enums to short type.
Anyway, the type can be decided after scanning all of
enumeration-constants.
Totally, there's no rules to constrain the value of enumerated type to
be one of enumeration-constants. In short, in enumerated type, decision
of actual type for the type is the most important and
enumeration-constants are just used for the decision, thus it's permitted
to have an integer value in a range of enumeration-constants. In our case,
actual type for the type is currently deterministic to be either char or
unsigned int. Under GCC, it's unsigned int.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes:
- Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira)
- Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo)
- Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo)
- Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo)
- Fix 'perf record --switch-output' documentation and comment (Jiri Olsa)
- 'perf probe' fixes for cross arch probing (Masami Hiramatsu)
Improvement:
- Show total scheduling time in 'perf sched timehist' (Namhyumg Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=o9KL
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.10-20170104' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes and one improvement from Arnaldo Carvalho de Melo:
Fixes:
- Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira)
- Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo)
- Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo)
- Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo)
- Fix 'perf record --switch-output' documentation and comment (Jiri Olsa)
- Fix 'perf probe' for cross arch probing (Masami Hiramatsu)
Improvement:
- Show total scheduling time in 'perf sched timehist' (Namhyumg Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
UDF encodes symlinks in a more complex fashion and thus i_size of a
symlink does not match the lenght of a string returned by readlink(2).
This confuses some applications (see bug 191241) and may be considered a
violation of POSIX. Fix the problem by reading the link into page cache
in response to stat(2) call and report the length of the decoded path.
Signed-off-by: Jan Kara <jack@suse.cz>
Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion
logic allows us to save a few cpu cycles by returning early, skipping the
pending urb in case the stream was stopped; the stop logic handles the urb
and sets the completion callbacks to NULL.
Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 16200948d8 ("ALSA: usb-audio: Fix race at stopping the stream") was
incomplete causing another more severe kernel panic, so it got reverted.
This fixes both the original problem and its fallout kernel race/crash.
The original fix is to move the endpoint member NULL clearing logic inside
wait_clear_urbs() so the irq triggering the urb completion doesn't call
retire_capture/playback_urb() after the NULL clearing and generate a panic.
However this creates a new race between snd_usb_endpoint_start()'s call
to wait_clear_urbs() and the irq urb completion handler which again calls
retire_capture/playback_urb() leading to a new NULL dereference.
We keep the EP deactivation code in snd_usb_endpoint_start() because
removing it will break the EP reference counting (see [1] [2] for info),
however we don't need the "can_sleep" mechanism anymore because a new
function was introduced (snd_usb_endpoint_sync_pending_stop()) which
synchronizes pending stops and gets called inside the pcm prepare callback.
It also makes sense to remove can_sleep because it was also removed from
deactivate_urbs() signature in [3] so we benefit from more simplification.
[1] commit 015618b90 ("ALSA: snd-usb: Fix URB cancellation at stream start")
[2] commit e9ba389c5 ("ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream")
[3] commit ccc1696d5 ("ALSA: usb-audio: simplify endpoint deactivation code")
Fixes: f8114f8583 ("Revert "ALSA: usb-audio: Fix race at stopping the stream"")
Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Acked-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although on most systems va_end is a no-op, it is good practice to use
va_end on the function return path, especially since the va_start
documenation states:
"Each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function."
Found with static analysis by CoverityScan, CIDs 1389477-1389479
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Version 11.2.1.0
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a warning message to indicate obsolete/unsupported
BE2 Adapter Family devices
Signed-off-by: Ketan Mukadam <ketan.mukadam@avagotech.com>
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After TPE recovery, CID table needs to be repopulated as per CIDs in
WRBQ creation responses.
SGL handles table needs to be recreated for posting and its indices need
to be resetted.
This is achieved by calling beiscsi_cleanup_port when disabling and
beiscsi_init_port in enabling port.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set CID slot to 0xffff to indicate empty.
Check if connection already exists in conn_table before binding.
Check if endpoint already NULL before putting back CID.
Break ep->conn link in free_ep to ignore completions after freeing.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
