With new binutils, gcc may get smart with its optimization and change a jmp
from a 5 byte jump to a 2 byte one even though it was jumping to a global
function. But that global function existed within a 2 byte radius, and gcc
was able to optimize it. Unfortunately, that jump was also being modified
when function graph tracing begins. Since ftrace expected that jump to be 5
bytes, but it was only two, it overwrote code after the jump, causing a
crash.
This was fixed for x86_64 with commit 8329e818f1, with the same subject as
this commit, but nothing was done for x86_32.
Cc: stable@vger.kernel.org
Fixes: d61f82d066 ("ftrace: use dynamic patching for updating mcount calls")
Reported-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace event start up selftests fails when the trace benchmark is
enabled, because it is disabled during boot. It really only needs to be
disabled before scheduling is set up, as it creates a thread.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If one of the events within a system fails to enable when "1" is written
to the system "enable" file, it should return an error. Note, some events
may still be enabled, but the user should know that something did go wrong.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace events are enabled very early on boot up via the boot command line
parameter. The benchmark tool creates a new thread to perform the trace
event benchmarking. But at start up, it is called before scheduling is set
up and because it creates a new thread before the init thread is created,
this crashes the kernel.
Have the benchmark fail to register when started via the kernel command
line.
Also, since the registering of a tracepoint now can handle failure cases,
return -ENOMEM instead of warning if the thread cannot be created.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some tracepoints have a registration function that gets enabled when the
tracepoint is enabled. There may be cases that the registraction function
must fail (for example, can't allocate enough memory). In this case, the
tracepoint should also fail to register, otherwise the user would not know
why the tracepoint is not working.
Cc: David Howells <dhowells@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Module test reports:
temp1_max: Suspected overflow: [160000 vs. 0]
temp1_min: Suspected overflow: [160000 vs. 0]
This is seen because the values passed when writing temperature limits
are unbound.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Fixes: 6099469805 ("hwmon: Support for Dallas Semiconductor DS620")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Module test reports:
in0_min: Suspected overflow: [3320 vs. 0]
in0_max: Suspected overflow: [3320 vs. 0]
in4_min: Suspected overflow: [15938 vs. 0]
in4_max: Suspected overflow: [15938 vs. 0]
temp1_max: Suspected overflow: [127000 vs. 0]
temp1_max_hyst: Suspected overflow: [127000 vs. 0]
aout_output: Suspected overflow: [1250 vs. 0]
Code analysis reveals that the overflows are caused by conversions
from unsigned long to long to int, combined with multiplications on
passed values.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
btrfs_transaction_abort() has a WARN() to help us nail down whatever
problem lead to the abort. But most of the time, we're aborting for EIO,
and the warning just adds noise.
Signed-off-by: Chris Mason <clm@fb.com>
Function hid_post_reset() should return negative error codes on failures.
However, in its implementation, it incorrectly returns 1. This patch fixes the
bug, returning proper error codes on failures.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
gmame archive does not longer exist. Use the message id and
generic redirector instead.
Reported-by: John Donnelly <john.donnelly@canonical.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
post input_sync only when there are input events posted
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make sure everything reported from pad are registered
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sometime valid events may not be supported by the driver yet. Make
sure we don't process them when the code is not ready.
This fix prevents a kernel panic due to unsupported HID events.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is unnecessary to return a value since nothing is expecting a
value from it.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When mac80211 abandons an association attempt, it may free
all the data structures, but inform cfg80211 and userspace
about it only by sending the deauth frame it received, in
which case cfg80211 has no link to the BSS struct that was
used and will not cfg80211_unhold_bss() it.
Fix this by providing a way to inform cfg80211 of this with
the BSS entry passed, so that it can clean up properly, and
use this ability in the appropriate places in mac80211.
This isn't ideal: some code is more or less duplicated and
tracing is missing. However, it's a fairly small change and
it's thus easier to backport - cleanups can come later.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_ATTR_MAC was used to set both the specific BSSID to be scanned
and the random MAC address to be used when privacy is enabled. When both
the features are enabled, both the BSSID and the local MAC address were
getting same value causing Probe Request frames to go with unintended
DA. Hence, this has been fixed by using a different NL80211_ATTR_BSSID
attribute to set the specific BSSID (which was the more recent addition
in cfg80211) for a scan.
Backwards compatibility with old userspace software is maintained to
some extent by allowing NL80211_ATTR_MAC to be used to set the specific
BSSID when scanning without enabling random MAC address use.
Scanning with random source MAC address was introduced by commit
ad2b26abc1 ("cfg80211: allow drivers to support random MAC addresses
for scan") and the issue was introduced with the addition of the second
user for the same attribute in commit 818965d391 ("cfg80211: Allow a
scan request for a specific BSSID").
Fixes: 818965d391 ("cfg80211: Allow a scan request for a specific BSSID")
Signed-off-by: Vamsi Krishna <vamsin@qti.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Arend inadvertently inverted the logic while converting to
wdev_running(), fix that.
Fixes: 73c7da3dae ("cfg80211: add generic helper to check interface is running")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The resume code must deal with a clocksource delta which is potentially big
enough to overflow the 64bit mult.
Replace the open coded handling with the proper function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Parit Bhargava <prarit@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: "Christopher S. Hall" <christopher.s.hall@intel.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Liav Rehana <liavr@mellanox.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20161208204228.921674404@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
cycle_t is defined as u64, so casting it to u64 is a pointless and
confusing exercise. cycle_t should simply go away and be replaced with a
plain u64 to avoid further confusion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Parit Bhargava <prarit@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: "Christopher S. Hall" <christopher.s.hall@intel.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Liav Rehana <liavr@mellanox.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20161208204228.844699737@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Propagating a unsigned value through signed variables and functions makes
absolutely no sense and is just prone to (re)introduce subtle signed
vs. unsigned issues as happened recently.
Clean it up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Parit Bhargava <prarit@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: "Christopher S. Hall" <christopher.s.hall@intel.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Liav Rehana <liavr@mellanox.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20161208204228.765843099@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The clocksource delta to nanoseconds conversion is using signed math, but
the delta is unsigned. This makes the conversion space smaller than
necessary and in case of a multiplication overflow the conversion can
become negative. The conversion is done with scaled math:
s64 nsec_delta = ((s64)clkdelta * clk->mult) >> clk->shift;
Shifting a signed integer right obvioulsy preserves the sign, which has
interesting consequences:
- Time jumps backwards
- __iter_div_u64_rem() which is used in one of the calling code pathes
will take forever to piecewise calculate the seconds/nanoseconds part.
This has been reported by several people with different scenarios:
David observed that when stopping a VM with a debugger:
"It was essentially the stopped by debugger case. I forget exactly why,
but the guest was being explicitly stopped from outside, it wasn't just
scheduling lag. I think it was something in the vicinity of 10 minutes
stopped."
When lifting the stop the machine went dead.
The stopped by debugger case is not really interesting, but nevertheless it
would be a good thing not to die completely.
But this was also observed on a live system by Liav:
"When the OS is too overloaded, delta will get a high enough value for the
msb of the sum delta * tkr->mult + tkr->xtime_nsec to be set, and so
after the shift the nsec variable will gain a value similar to
0xffffffffff000000."
Unfortunately this has been reintroduced recently with commit 6bd58f09e1
("time: Add cycles to nanoseconds translation"). It had been fixed a year
ago already in commit 35a4933a89 ("time: Avoid signed overflow in
timekeeping_get_ns()").
Though it's not surprising that the issue has been reintroduced because the
function itself and the whole call chain uses s64 for the result and the
propagation of it. The change in this recent commit is subtle:
s64 nsec;
- nsec = (d * m + n) >> s:
+ nsec = d * m + n;
+ nsec >>= s;
d being type of cycle_t adds another level of obfuscation.
This wouldn't have happened if the previous change to unsigned computation
would have made the 'nsec' variable u64 right away and a follow up patch
had cleaned up the whole call chain.
There have been patches submitted which basically did a revert of the above
patch leaving everything else unchanged as signed. Back to square one. This
spawned a admittedly pointless discussion about potential users which rely
on the unsigned behaviour until someone pointed out that it had been fixed
before. The changelogs of said patches added further confusion as they made
finally false claims about the consequences for eventual users which expect
signed results.
Despite delta being cycle_t, aka. u64, it's very well possible to hand in
a signed negative value and the signed computation will happily return the
correct result. But nobody actually sat down and analyzed the code which
was added as user after the propably unintended signed conversion.
Though in sensitive code like this it's better to analyze it proper and
make sure that nothing relies on this than hunting the subtle wreckage half
a year later. After analyzing all call chains it stands that no caller can
hand in a negative value (which actually would work due to the s64 cast)
and rely on the signed math to do the right thing.
Change the conversion function to unsigned math. The conversion of all call
chains is done in a follow up patch.
This solves the starvation issue, which was caused by the negative result,
but it does not solve the underlying problem. It merily procrastinates
it. When the timekeeper update is deferred long enough that the unsigned
multiplication overflows, then time going backwards is observable again.
It does neither solve the issue of clocksources with a small counter width
which will wrap around possibly several times and cause random time stamps
to be generated. But those are usually not found on systems used for
virtualization, so this is likely a non issue.
I took the liberty to claim authorship for this simply because
analyzing all callsites and writing the changelog took substantially
more time than just making the simple s/s64/u64/ change and ignore the
rest.
Fixes: 6bd58f09e1 ("time: Add cycles to nanoseconds translation")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Liav Rehana <liavr@mellanox.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Parit Bhargava <prarit@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: "Christopher S. Hall" <christopher.s.hall@intel.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20161208204228.688545601@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
New inode operations were forgotten to be added to bad_inode. Most of the
time the op is checked for NULL before being called but marking the inode
bad and the check can race (very unlikely).
However in case of ->get_link() only DCACHE_SYMLINK_TYPE is checked before
calling the op, so there's no race and will definitely oops when trying to
follow links on such a beast.
Also remove comments about extinct ops.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A.
Since the interface positions are the same than the ones used
for other Telit compositions, previous defined blacklists are used.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the
following warning.
[ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072),
cval->res is probably wrong.
[ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val =
4608/7680/1
Adding it to the list of devices in volume_control_quirks makes it work
properly, fixing related typo.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Axe-Fx II implicit feedback end point and the data sync endpoint
are in different interface descriptors. Add quirk to ensure a sync
endpoint is properly configured.
Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of requesting a new slot on the ring to the backend early, do
so only after all has been setup for the request to be sent. This
makes error handling easier as we don't need to undo the request id
allocation and ring slot allocation.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
On systems with sufficiently large e820 tables, and several IOAPICs, it
is possible for the XENMEM_machine_memory_map callback (and its
counterpart, XENMEM_memory_map) to attempt to return an e820 table with
more than 128 entries. This callback adds entries to the BIOS-provided
e820 table to account for IOAPIC registers, which, on sufficiently large
systems, can result in an e820 table that is too large to copy back into
xen_e820_map.
This change simply increases the size of xen_e820_map to E820_X_MAX to
ensure that there is enough room to store the entire e820 map returned
from this callback.
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
It's really not necessary to limit E820_X_MAX to 128 in the non-EFI
case. This commit drops E820_X_MAX's dependency on CONFIG_EFI, so that
E820_X_MAX is always at least slightly larger than E820MAX.
The real motivation behind this is actually to prevent some issues in
the Xen kernel, where the XENMEM_machine_memory_map hypercall can
produce an e820 map larger than 128 entries, even on systems where the
original e820 table was quite a bit smaller than that, depending on how
many IOAPICs are installed on the system.
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Suggested-by: Ingo Molnar <mingo@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
This adds a 'Perf' section to i915.rst with the following sub sections:
- Overview
- Comparison with Core Perf
- i915 Driver Entry Points
- i915 Perf Stream
- i915 Perf Observation Architecture Stream
- All i915 Perf Internals
v2:
section headers in i915.rst (Daniel Vetter)
missing symbol docs + other fixups (Matthew Auld)
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207214033.3581-1-robert@sixbynine.org
A string which did not contain a data format specification should be put
into a sequence. Thus use the corresponding function "seq_puts".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
A string which did not contain a data format specification should be put
into a sequence. Thus use the corresponding function "seq_puts".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The mddev->flags are used for different purposes. There are a lot of
places we check/change the flags without masking unrelated flags, we
could check/change unrelated flags. These usage are most for superblock
write, so spearate superblock related flags. This should make the code
clearer and also fix real bugs.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
When we change level from raid1 to raid5, the MD_FAILFAST_SUPPORTED bit
will be accidentally set, but raid5 doesn't support it. The same is true
for the MD_HAS_JOURNAL bit.
Fix: 46533ff (md: Use REQ_FAILFAST_* on metadata writes where appropriate)
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
This is all unused code, so remove it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use NOFS for allocating btree cursors, since they can be called
under the ilock.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 6552321831 ("xfs: remove i_iolock and use i_rwsem in the
VFS inode instead") introduced a regression that truncate(2) doesn't
check on new size, so it succeeds even if the new size exceeds the
current resource limit. Because xfs_setattr_size() was used instead
of xfs_vn_setattr_size(), and the latter calls xfs_vn_change_ok()
first to do sanity check on permission and new size.
This is found by truncate03 test from ltp, and the following is a
simplified reproducer:
#!/bin/bash
dev=/dev/sda5
mnt=/mnt/xfs
mkfs -t xfs -f $dev
mount $dev $mnt
# set max file size to 16k
ulimit -f 16
truncate -s $((16 * 1024 + 1)) /mnt/xfs/testfile
[ $? -eq 0 ] && echo "FAIL: truncate exceeded max file size"
ulimit -f unlimited
umount $mnt
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We always perform integrity operations now, so these mount options
don't do anything. Deprecate them and mark them for removal in
in a year.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There is no reason anymore for not issuing device integrity
operations when teh filesystem requires ordering or data integrity
guarantees. We should always issue cache flushes and FUA writes
where necessary and let the underlying storage optimise them as
necessary for correct integrity operation.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we create a new attribute, we first create a shortform
attribute, and try to fit the new attribute into it.
If that fails, we copy the (empty) attribute into a leaf attribute,
and do the copy again. Thus there can be a transient state where
we have an empty leaf attribute.
If we encounter this during log replay, the verifier will fail.
So add a test to ignore this part of the leaf attr verification
during log replay.
Thanks as usual to dchinner for spotting the problem.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We encountered a deadlock where the SEQUENCE that accompanied the
LAYOUTGET triggered a session drain, while ff_layout_alloc_lseg
triggered a GETDEVICEINFO. The GETDEVICEINFO hung waiting for the
session drain, while the LAYOUTGET held the slot waiting for
alloc_lseg to finish.
Avoid this by moving the call to nfs4_find_get_deviceid out of
ff_layout_alloc_lseg and into nfs4_ff_layout_prepare_ds.
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
[dros@primarydata.com: pNFS/flexfiles: fix races in ff_layout_mirror_valid]
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Some fixes and cleanup, mainly around fbdev emulation. It also adds a
new module parameter which allows to specify the color depth/bpp for
the fbdev emulation (like the IMX DRM driver).
* tag 'drm-fsl-dcu-for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: introduce kernel parameter to specify fbdev depth
drm/fsl-dcu: remove separate compilation unit for fbdev emulation
drm/fsl-dcu: Propagate the real error code
drm/fsl-dcu: Remove unneeded NULL check
drm/fsl-dcu: disable outputs before unloading driver
drm/fsl-dcu: unload driver before disabling clocks
In some configurations, gcc cannot trace the state of variables
across a spin_unlock() barrier, leading to a warning about
correct code:
xgene_enet_main.c: In function 'xgene_enet_start_xmit':
../../../phy/mdio-xgene.h:112:14: error: 'mss_index' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Here we can trivially move the assignment before that spin_unlock,
which reliably avoids the warning.
Fixes: e3978673f5 ("drivers: net: xgene: Fix MSS programming")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The array for initializing the cle is set up on the stack with
almost entirely constant data and then passed to a function that
converts it into HW specific bit patterns. With the latest
addition, the size of this array has grown to the point that
we get a warning about potential stack overflow in allmodconfig
builds:
xgene_enet_cle.c: In function ‘xgene_enet_cle_init’:
xgene_enet_cle.c:836:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Looking a bit deeper at the usage, I noticed that the only modification
of the data is in dead code, as we don't even use the cle module
for phy_mode other than PHY_INTERFACE_MODE_XGMII. This means we
can simply mark the structure constant and access it directly rather
than passing the pointer down through another structure, making
the code more efficient at the same time as avoiding the
warning.
Fixes: a809701fed ("drivers: net: xgene: fix: RSS for non-TCP/UDP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
On 32-bit ARM with 64-bit dma_addr_t I get this warning about an
incorrect format string:
In file included from /git/arm-soc/drivers/net/ethernet/mellanox/mlx5/core/alloc.c:42:0:
drivers/net/ethernet/mellanox/mlx5/core/alloc.c: In function ‘mlx5_frag_buf_alloc_node’:
drivers/net/ethernet/mellanox/mlx5/core/alloc.c:134:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
We have the special %pad format for printing dma_addr_t, so use that
to print the correct address and avoid the warning.
Fixes: 1c1b522808 ("net/mlx5e: Implement Fragmented Work Queue (WQ)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Another pile of misc stuff, final one for 4.10. If there's some serious
bugfix still I'll send you a pull for drm-misc-next-fixes (like we do with
intel), otherwise this is it and next pull next year for 4.11.
Most interesting bits are probably Chris' fb helper fixes against mst
hotplug oopses.
* tag 'drm-misc-next-2016-12-08' of git://anongit.freedesktop.org/git/drm-misc: (22 commits)
drm: Take ownership of the dmabuf->obj when exporting
drm: Allow CAP_PRIME on !MODESET
drm/fence: add drm_crtc_create_fence()
drm/bridge: analogix: Don't return -EINVAL when panel doesn't support PSR
drm/atomic: doc: remove old comment about nonblocking commits
drm: Don't block the kworker waiting for mode_config.mutex in output_poll()
drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver
drm/amdgpu: don't add files at control minor debugfs directory
drm: allow changing DPMS mode
drm/qxl: fix use of uninitialized variable
drm/qxl: Don't register debugfs for control minors
drm/radeon: don't add files at control minor debugfs directory
drm/vmwgfx: Switch to mode_cmd2
drm/vgem: Use ww_mutex_(un)lock even with a NULL context
drm: Make the connector .detect() callback optional
drm/bridge: tc358767: don't warn if display side ASSR enable fails
drm: Initialise drm_mm.head_node.allocated
drm: Fix locking cargo-cult in encoder/plane init/cleanup
drm/doc: Fix indenting in drm_modeset_lock.c comment
drm: Protect fb_helper list manipulation with a mutex
...
