Commit graph

691,473 commits

Author SHA1 Message Date
Will Drewry
6d1d8050b4 block, partition: add partition_meta_info to hd_struct
I'm reposting this patch series as v4 since there have been no additional
comments, and I cleaned up one extra bit of unneeded code (in 3/3). The patches
are against Linus's tree: 2bfc96a127
(2.6.36-rc3).

Would this patchset be suitable for inclusion in an mm branch?

This changes adds a partition_meta_info struct which itself contains a
union of structures that provide partition table specific metadata.

This change leaves the union empty. The subsequent patch includes an
implementation for CONFIG_EFI_PARTITION-based metadata.

Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-15 16:13:18 +02:00
Jarkko Nikula
9900daa81b ASoC: tlv320aic3x: Complete the soc-cache conversion
Complete the phasing out of aic3x_read_reg_cache, aic3x_write_reg_cache,
aic3x_read and aic3x_write calls.

This patch uses in aic3x_read the codec->hw_read that points to a function
implemented by soc-cache. Only use for aic3x_read is if wanting to read
volatile bits from those registers that has both read-only and read/write
bits. All other cases should use snd_soc_read.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-15 13:56:15 +01:00
Jarkko Nikula
a84a441ba3 ASoC: tlv320aic3x: Switch to soc-cache helpers
Continue phasing out aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read
and aic3x_write calls.

This patch takes the soc-cache in use and removes aic3x_read_reg_cache and
aic3x_write.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-15 13:56:15 +01:00
Jarkko Nikula
e18eca4303 ASoC: tlv320aic3x: Use snd_soc_read and snd_soc_write
Start phasing out aic3x_read_reg_cache, aic3x_write_reg_cache, aic3x_read and
aic3x_write calls in order to switch to soc-cache helpers.

This patch replaces aic3x_read_reg_cache and aic3x_write with snd_soc_read
and snd_soc_write. This is basically null-op since .read and .write in
soc_codec_dev_aic3x points to aic3x_read_reg_cache and aic3x_write.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-15 13:56:15 +01:00
Namhyung Kim
144177991c block: fix an address space warning in blk-map.c
Change type of 2nd parameter of blk_rq_aligned() into unsigned long
and remove unnecessary casting. Now we can call it with 'uaddr'
instead of 'ubuf' in __blk_rq_map_user() so that it can remove
following warnings from sparse:

 block/blk-map.c:57:31: warning: incorrect type in argument 2 (different address spaces)
 block/blk-map.c:57:31:    expected void *addr
 block/blk-map.c:57:31:    got void [noderef] <asn:1>*ubuf

However blk_rq_map_kern() needs one more local variable to handle it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-15 13:08:27 +02:00
Arnaud Patard (Rtp)
697378972d ASoC: Change my mail address
Like other coworkers, I'm about leave Mandriva/Edge-It so I'm changing
my mail address to use my personal one.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-15 12:03:58 +01:00
Jarkko Nikula
c6d5cca0a0 ASoC: Remove needless codec->bias_level assignment to SND_SOC_BIAS_OFF
This assignment is done by the snd_soc_register_codec so there is no need
to redo it in probe function of a codec driver.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-15 12:03:34 +01:00
Gerrit Renker
37efb03fbd dccp ccid-3: Simplify and consolidate tx_parse_options
This simplifies and consolidates the TX option-parsing code:

 1. The Loss Intervals option is not currently used, so dead code related to
    this option is removed. I am aware of no plans to support the option, but
    if someone wants to implement it (e.g. for inter-op tests), it is better
    to start afresh than having to also update currently unused code.

 2. The Loss Event and Receive Rate options have a lot of code in common (both
    are 32 bit, both have same length etc.), so this is consolidated.

 3. The test against GSR is not necessary, because
    - on first loading CCID3, ccid_new() zeroes out all fields in the socket;
    - ccid3_hc_tx_packet_recv() treats 0 and ~0U equivalently, due to

	pinv = opt_recv->ccid3or_loss_event_rate;
	if (pinv == ~0U || pinv == 0)
		hctx->p = 0;

    - as a result, the sequence number field is removed from opt_recv.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-15 12:36:02 +02:00
Gerrit Renker
d2c726309d dccp ccid-3: remove buggy RTT-sampling history lookup
This removes the RTT-sampling function tfrc_tx_hist_rtt(), since

 1. it suffered from complex passing of return values (the return value both
    indicated successful lookup while the value doubled as RTT sample);

 2. when for some odd reason the sample value equalled 0, this triggered a bug
    warning about "bogus Ack", due to the ambiguity of the return value;

 3. on a passive host which has not sent anything the TX history is empty and
    thus will lead to unwanted "bogus Ack" warnings such as
    ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-28197148
    ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-26641606.

The fix is to replace the implicit encoding by performing the steps manually.

Furthermore, the "bogus Ack" warning has been removed, since it can actually be
triggered due to several reasons (network reordering, old packet, (3) above),
hence it is not very useful.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-15 12:36:02 +02:00
Gerrit Renker
20cbd3e120 dccp ccid-3: A lower bound for the inter-packet scheduling algorithm
This fixes a subtle bug in the calculation of the inter-packet gap and shows
that t_delta, as it is currently used, is not needed.

The algorithm from RFC 5348, 8.3 below continually computes a send time t_nom,
which is initialised with the current time t_now; t_gran = 1E6 / HZ specifies
the scheduling granularity, s the packet size, and X the sending rate:

  t_distance = t_nom - t_now;		// in microseconds
  t_delta    = min(t_ipi, t_gran) / 2;	// `delta' parameter in microseconds

  if (t_distance >= t_delta) {
	reschedule after (t_distance / 1000) milliseconds;
  } else {
  	t_ipi  = s / X;			// inter-packet interval in usec
	t_nom += t_ipi;			// compute the next send time
	send packet now;
  }

Problem:
--------
Rescheduling requires a conversion into milliseconds (sk_reset_timer()). The
highest jiffy resolution with HZ=1000 is 1 millisecond, so using a higher
granularity does not make much sense here.

As a consequence, values of t_distance < 1000 are truncated to 0. This issue
has so far been resolved by using instead

  if (t_distance >= t_delta + 1000)
	reschedule after (t_distance / 1000) milliseconds;

This is unnecessarily large, a lower bound is t_delta' = max(t_delta, 1000).
And it implies a further simplification:

 a) when HZ >= 500, then t_delta <= t_gran/2 = 10^6/(2*HZ) <= 1000, so that
    t_delta' = MAX(1000, t_delta) = 1000 (constant value);

 b) when HZ < 500, then t_delta = 1/2*MIN(rtt, t_ipi, t_gran) <= t_gran/2,
    so that 1000 <= t_delta' <= t_gran/2.

The maximum error of using a constant t_delta in (b) is less than half a jiffy.

Fix:
----
The patch replaces t_delta with a constant, whose value depends on CONFIG_HZ,
changing the above algorithm to:

  if (t_distance >= t_delta')
	reschedule after (t_distance / 1000) milliseconds;

where t_delta' = 10^6/(2*HZ) if HZ < 500, and t_delta' = 1000 otherwise.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-09-15 12:36:01 +02:00
Chris Wilson
2f551c8456 drm/i915/sdvo: Mark the status as unknown if attached with EDID
One problem with devices that share the DDC bus between the VGA and
DVI-I connectors is that with two devices attached we cannot know if
there is truly a monitor attached to the DVI connector. In this case, it
is preferrrable to mark the status as unknown, so that the user can
supply the known set of modes and continue to use the output.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-15 10:42:50 +01:00
Chris Wilson
ff482d8317 drm/i915/sdvo: Only create the analog encoder as required
We only need to use the analog encoder for rare devices which share the
DDC between the DVI-I and VGA connectors, so only create as needed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-15 10:40:38 +01:00
Namhyung Kim
635c17c2b2 kprobes: Add sparse context annotations
This removes following warnings when build with C=1

 warning: context imbalance in 'kretprobe_hash_lock' - wrong count at exit
 warning: context imbalance in 'kretprobe_table_lock' - wrong count at exit
 warning: context imbalance in 'kretprobe_hash_unlock' - unexpected unlock
 warning: context imbalance in 'kretprobe_table_unlock' - unexpected unlock

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1284512670-2369-6-git-send-email-namhyung@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:44:02 +02:00
Namhyung Kim
6abded71d7 kprobes: Remove __dummy_buf
Remove __dummy_buf which is needed for kallsyms_lookup only.
use kallsysm_lookup_size_offset instead.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1284512670-2369-5-git-send-email-namhyung@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:44:02 +02:00
Namhyung Kim
6376b22975 kprobes: Make functions static
Make following (internal) functions static to make sparse
happier :-)

 * get_optimized_kprobe: only called from static functions
 * kretprobe_table_unlock: _lock function is static
 * kprobes_optinsn_template_holder: never called but holding asm code

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1284512670-2369-4-git-send-email-namhyung@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:44:01 +02:00
Namhyung Kim
05662bdb64 kprobes: Verify jprobe entry point
Verify jprobe's entry point is a function entry point
using kallsyms' offset value.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1284512670-2369-3-git-send-email-namhyung@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:44:01 +02:00
Namhyung Kim
edbaadbe42 kprobes: Remove redundant address check
Remove call to kernel_text_address() in register_jprobes()
because it is called right after in register_kprobe().

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1284512670-2369-2-git-send-email-namhyung@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:44:00 +02:00
Matt Helsley
38a81da220 perf events: Clean up pid passing
The kernel perf event creation path shouldn't use find_task_by_vpid()
because a vpid exists in a specific namespace. find_task_by_vpid() uses
current's pid namespace which isn't always the correct namespace to use
for the vpid in all the places perf_event_create_kernel_counter() (and
thus find_get_context()) is called.

The goal is to clean up pid namespace handling and prevent bugs like:

	https://bugzilla.kernel.org/show_bug.cgi?id=17281

Instead of using pids switch find_get_context() to use task struct
pointers directly. The syscall is responsible for resolving the pid to
a task struct. This moves the pid namespace resolution into the syscall
much like every other syscall that takes pid parameters.

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robin Green <greenrd@greenrd.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <a134e5e392ab0204961fd1a62c84a222bf5874a9.1284407763.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:44:00 +02:00
Matt Helsley
2ebd4ffb6d perf events: Split out task search into helper
Split out the code which searches for non-exiting tasks into its own
helper. Creating this helper not only makes the code slightly more
readable it prepares to move the search out of find_get_context() in
a subsequent commit.

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robin Green <greenrd@greenrd.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <561205417b450b8a4bf7488374541d64b4690431.1284407762.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:44:00 +02:00
Matt Helsley
d958077d00 hw breakpoints: Fix pid namespace bug
Hardware breakpoints can't be registered within pid namespaces
because tsk->pid is passed rather than the pid in the current
namespace.

(See https://bugzilla.kernel.org/show_bug.cgi?id=17281 )

This is a quick fix demonstrating the problem but is not the
best method of solving the problem since passing pids internally
is not the best way to avoid pid namespace bugs. Subsequent patches
will show a better solution.

Much thanks to Frederic Weisbecker <fweisbec@gmail.com> for doing the
bulk of the work finding this bug.

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robin Green <greenrd@greenrd.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
LKML-Reference: <f63454af09fb1915717251570423eb9ddd338340.1284407762.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:43:59 +02:00
Matt Fleming
64a48d9014 perf, sh: Fix patch merge foul-up
3f6da390 ("perf: Rework and fix the arch CPU-hotplug hooks") introduced
this breakage. sh_pmu_setup() is missing an opening curly brace.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100913191729.GA6440@console-pimps.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:43:59 +02:00
Michael Cree
65175c0765 alpha: Fix HW performance counters to be stopped properly
Also fix a few compile errors due to undefined and duplicated
variables.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1284269844-23251-1-git-send-email-mcree@orcon.net.nz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:43:59 +02:00
Stephane Eranian
d9ca07a05c watchdog: Avoid kernel crash when disabling watchdog
In case you boot with the watchdog disabled, i.e., nowatchdog, then,
if you try to disable it via /proc/sys/kernel/watchdog, you get
a kernel crash. The reason is that you are trying to cancel a hrtimer
which has never been initialized.

This patch fixes this by skipping execution of
watchdog_disable_all_cpus() when the watchdog is marked
disabled from boot.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4c8f7a23.cae9d80a.2c11.0bb4@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:43:58 +02:00
Stanislaw Gruszka
e75e863dd5 sched: Fix user time incorrectly accounted as system time on 32-bit
We have 32-bit variable overflow possibility when multiply in
task_times() and thread_group_times() functions. When the
overflow happens then the scaled utime value becomes erroneously
small and the scaled stime becomes i erroneously big.

Reported here:

 https://bugzilla.redhat.com/show_bug.cgi?id=633037
 https://bugzilla.kernel.org/show_bug.cgi?id=16559

Reported-by: Michael Chapman <redhat-bugzilla@very.puzzling.org>
Reported-by: Ciriaco Garcia de Celis <sysman@etherpilot.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: <stable@kernel.org>  # 2.6.32.19+ (partially) and 2.6.33+
LKML-Reference: <20100914143513.GB8415@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:41:36 +02:00
Ingo Molnar
3aabae7d9d Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2010-09-15 10:27:31 +02:00
Jaroslav Kysela
1446c5fba7 ALSA: snd-aloop - fix the "PCM Playback Channels" kcontrol
Obvious copy-and-paste error.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-09-15 08:05:03 +02:00
David S. Miller
6dcbc12290 net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS
You cannot invoke __smp_call_function_single() unless the
architecture sets this symbol.

Reported-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 21:42:22 -07:00
andrew hendry
21a4591794 X.25 remove bkl in connect
Connect already has socket locking.

Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:39:09 -07:00
Andrew Hendry
141646ce56 X.25 remove bkl in accept
Accept already has socket locking.

[ Extend socket locking over TCP_LISTEN state test. -DaveM ]

Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:38:54 -07:00
andrew hendry
90c27297a9 X.25 remove bkl in bind
Accept updates socket values in 3 lines so wrapped with lock_sock.

Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:34:52 -07:00
andrew hendry
25aa4efe4f X.25 remove bkl in listen
Listen updates socket values and needs lock_sock.

Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:34:52 -07:00
Joe Perches
55b1804c67 net/irda: Use static const char * const where possible
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:22:05 -07:00
Joe Perches
030bda0d41 drivers/net/wireless: Use static const char * const where possible
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:22:04 -07:00
Joe Perches
99101d3d89 drivers/net/pcmcia: Use static const char * const where possible
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:22:03 -07:00
Joe Perches
6fa59c9da8 drivers/net: Use static const char * const where possible
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:22:03 -07:00
Joe Perches
6f68ad7fbb drivers/isdn: Use static const char * const where possible
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14 20:22:02 -07:00
Steven Rostedt
79e406d7b0 tracing: Remove leftover FTRACE_ENABLE/DISABLE_MCOUNT enums
The enums for FTRACE_ENABLE_MCOUNT and FTRACE_DISABLE_MCOUNT were
used as commands to ftrace_run_update_code(). But these commands
were used by the old nasty ftrace daemon that has long been slain.

This is a clean up patch to remove the references to these enums
and simplify the code a little.

Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 22:19:46 -04:00
Alex Deucher
fe725d4f22 drm/radeon/kms: only warn on mipmap size checks in r600 cs checker (v2)
The texture base address registers are in units of 256 bytes.
The original CS checker treated these offsets as bytes, so the
original check was wrong.  I fixed the units in a patch during
the 2.6.36 cycle, but this ended up breaking some existing
userspace (probably due to a bug in either userspace texture allocation
or the drm texture mipmap checker).  So for now, until we come
up with a better fix, just warn if the mipmap size it too large.
This will keep existing userspace working and it should be just
as safe as before when we were checking the wrong units.  These
are GPU MC addresses, so if they fall outside of the VRAM or
GART apertures, they end up at the GPU default page, so this should
be safe from a security perspective.

v2: Just disable the warning.  It just spams the log and there's
nothing the user can do about it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-15 11:13:09 +10:00
Steven Rostedt
b304d0441a tracing: Do not trace in irq when funcgraph-irq option is zero
When the function graph tracer funcgraph-irq option is zero, disable
tracing in IRQs. This makes the option have two effects.

1) When reading the trace file, do not display the functions that
   happen in interrupt context (when detected)

2) [*new*] When recording a trace, skip those that are detected
   to be in interrupt by the 'in_irq()' function

Note, in_irq() is updated at irq_enter() and irq_exit(). There are
still functions that are recorded by the function graph tracer that
is in interrupt context but outside the irq_enter/exit() routines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 20:18:07 -04:00
Jiri Olsa
2bd16212b8 tracing: Add funcgraph-irq option for function graph tracer.
It's handy to be able to disable the irq related output
and not to have to jump over each irq related code, when
you have no interrest in it.

The option is by default enabled, so there's no change to
current behaviour. It affects only the final output, so all
the irq related data stay in the ring buffer.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100907145344.GC1912@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 20:18:07 -04:00
Linus Torvalds
9c03f1622a Merge ssh://master.kernel.org/home/hpa/tree/sec
* ssh://master.kernel.org/home/hpa/tree/sec:
  x86-64, compat: Retruncate rax after ia32 syscall entry tracing
  x86-64, compat: Test %rax for the syscall number, not %eax
  compat: Make compat_alloc_user_space() incorporate the access_ok()
2010-09-14 17:07:51 -07:00
David Howells
a4128b03ff MN10300: Fix up the IRQ names for the on-chip serial ports
Fix up the IRQ names for the MN10300 on-chip serial ports in the driver as
request_interrupt() no longer allows names containing slashes, giving a warning
like the following if one is encountered:

	------------[ cut here ]------------
	WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0x62/0x7c()
	name 'ttySM0/Rx'

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-14 17:06:28 -07:00
Linus Torvalds
65e0b598bd Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not defined
  mtd: mxc_nand: configure pages per block for v2 controller
  mtd: OneNAND: Fix loop hang when DMA error at Samsung SoCs
  mtd: OneNAND: Fix 2KiB pagesize handling at Samsung SoCs
  mtd: Blackfin NFC: fix invalid free in remove()
  mtd: Blackfin NFC: fix build error after nand_scan_ident() change
  mxc_nand: Do not do byte accesses to the NFC buffer.
2010-09-14 17:05:39 -07:00
Linus Torvalds
d7a4b63b51 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix hiddev's use of usb_find_interface
  HID: fixup blacklist entry for Asus T91MT
  HID: add device ID for new Asus Multitouch Controller
  HID: add no-get quirk for eGalax touch controller
  HID: Add quirk for eGalax touch controler.
  HID: add support for another BTC Emprex remote control
  HID: Set Report ID properly for Output reports on the Control endpoint.
  HID: Kanvus Note A5 tablet needs HID_QUIRK_MULTI_INPUT
  HID: Add support for chicony multitouch screens.
2010-09-14 17:05:09 -07:00
Linus Torvalds
de8d4f5d75 Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  SUNRPC: Fix the NFSv4 and RPCSEC_GSS Kconfig dependencies
  statfs() gives ESTALE error
  NFS: Fix a typo in nfs_sockaddr_match_ipaddr6
  sunrpc: increase MAX_HASHTABLE_BITS to 14
  gss:spkm3 miss returning error to caller when import security context
  gss:krb5 miss returning error to caller when import security context
  Remove incorrect do_vfs_lock message
  SUNRPC: cleanup state-machine ordering
  SUNRPC: Fix a race in rpc_info_open
  SUNRPC: Fix race corrupting rpc upcall
  Fix null dereference in call_allocate
2010-09-14 17:04:48 -07:00
Jeff Moyer
75e1c70fc3 aio: check for multiplication overflow in do_io_submit
Tavis Ormandy pointed out that do_io_submit does not do proper bounds
checking on the passed-in iocb array:

       if (unlikely(nr < 0))
               return -EINVAL;

       if (unlikely(!access_ok(VERIFY_READ, iocbpp, (nr*sizeof(iocbpp)))))
               return -EFAULT;                      ^^^^^^^^^^^^^^^^^^

The attached patch checks for overflow, and if it is detected, the
number of iocbs submitted is scaled down to a number that will fit in
the long.  This is an ok thing to do, as sys_io_submit is documented as
returning the number of iocbs submitted, so callers should handle a
return value of less than the 'nr' argument passed in.

Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-14 17:02:37 -07:00
David Cross
ef6c3c6e53 staging: west bridge: pnand hal fixes
This patch includes changing some defines, necessary for compilation
with the linux-next tree.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 16:52:47 -07:00
David Cross
4c404487aa staging: west bridge: cyasgadget, remove file system / vfs calls
This patch remove file system specific (fat_get_block) and vfs calls
from the cyasgadget driver. The current implementation expects user
space to write the file (open, seek to end, 1 byte write), followed by a
call to clear the dirty pages from the the page cache.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 16:52:47 -07:00
David Cross
72bbd9bce4 Staging: west bridge: block driver api fix
This patch contains an update for cyasblkdev_queue.c which is needed for
the kernel update from 2.6.35 to 2.6.36.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 16:52:46 -07:00
David Cross
4ecea3c51b Staging: west bridge: Kconfig fix
This patch fixes the currently broken Kconfig for west bridge by
introducing a dependency on a valid HAL Layer for the driver build.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 16:52:46 -07:00