Commit graph

691,473 commits

Author SHA1 Message Date
Jarkko Nikula
c776357e0a ASoC: tlv320aic3x: Fix null pointer dereference when pdata is not set
Null pointer dereference will occur from *setup = pdata->setup if pdata
is not set. Fix this by moving assignments from pdata inside non-null case.

Thanks to Jiri Slaby <jirislaby@gmail.com> for noticing.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06 11:36:22 +01:00
Mark Brown
ea0d09de13 ASoC: Add event variants of the AIF widgets
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06 11:34:29 +01:00
Axel Lin
8ecee36adc regulator: wm8350-regulator - fix the logic of checking REGULATOR_MODE_STANDBY mode
In wm8350_dcdc_set_mode(), we set DCx_SLEEP bit of WM8350_DCDC_SLEEP_OPTIONS
register for REGULATOR_MODE_STANDBY mode.
( DCx_SLEEP bits: 0: Normal DC-DC operation 1: Select LDO mode )

In wm8350_dcdc_get_mode(), current logic to determinate
REGULATOR_MODE_STANDBY mode is just reverse.
( sleep is set should mean REGULATOR_MODE_STANDBY mode. )

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06 11:14:47 +01:00
Axel Lin
e260999c66 regulator: wm831x-ldo - fix the logic to set REGULATOR_MODE_IDLE and REGULATOR_MODE_STANDBY modes
Problem description in current implementation:
When setting REGULATOR_MODE_IDLE mode, current implementation set
WM831X_LDO1_LP_MODE bit of ctrl_reg (which is wrong, it should clear the bit).
But due to a missing break statement for case REGULATOR_MODE_IDLE, the code
fall through to case REGULATOR_MODE_STANDBY and then clear
WM831X_LDO1_LP_MODE bit. So it still looks OK when checking the status
by wm831x_gp_ldo_get_mode().

When setting REGULATOR_MODE_STANDBY mode, it just does not work.
wm831x_gp_ldo_get_mode() will still return REGULATOR_MODE_IDLE because
the accordingly WM831X_LDO1_LP_MODE bit is clear.

Correct behavior should be:
Clear WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_IDLE mode.
Set WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_STANDBY mode.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06 11:14:47 +01:00
Michal Marek
88d7be031f kbuild: Use a single clean rule for kernel and external modules
The list of patterns for the external modules case was constantly
lagging behind.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-06 12:00:08 +02:00
Rhyland Klein
a7640bfa10 power_supply: Add driver for TI BQ20Z75 gas gauge IC
This driver depends on I2C and uses SMBUS for communication with
the host.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-06 11:35:39 +04:00
Michael S. Tsirkin
615cc2211c vhost: error handling fix
vhost should set worker to NULL on cgroups attach failure,
so that we won't try to destroy the worker again on close.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-06 09:49:39 +03:00
Michael S. Tsirkin
87d6a412bd vhost: fix attach to cgroups regression
Since 2.6.36-rc1, non-root users of vhost-net fail to attach
if they are in any cgroups.

The reason is that when qemu uses vhost, vhost wants to attach
its thread to all cgroups that qemu has.  But we got the API backwards,
so a non-priveledged process (Qemu) tried to control
the priveledged one (vhost), which fails.

Fix this by switching to the new cgroup_attach_task_all,
and running it from the vhost thread.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-06 09:49:31 +03:00
Greg Kroah-Hartman
30cb3e5fb5 Staging: rt2860: Fix brace coding style issue
This fixes a single brace issue in the rt_linux.c file.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 20:55:55 -07:00
Eric Dumazet
adea1ac7ef r8169: fix rx checksum offload
While porting GRO to r8169, I found this driver has a bug in its rx
path.

All skbs given to network stack had their ip_summed set to
CHECKSUM_NONE, while hardware said they had correct TCP/UDP checksums.

The reason is driver sets skb->ip_summed on the original skb before the
copy eventually done by copybreak. The fresh skb gets the ip_summed =
CHECKSUM_NONE value, forcing network stack to recompute checksum, and
preventing my GRO patch to work.

Fix is to make the ip_summed setting after skb copy.

Note : rx_copybreak current value is 16383, so all frames are copied...

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-05 20:04:05 -07:00
Bernie Thompson
2685cffa9e staging: udlfb: fix checkpatch and style
Fix warnings detected by tools

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 19:46:14 -07:00
Bernie Thompson
5bea1fbf94 staging: udlfb: fix incorrect fb_defio implementation for multiple framebuffers
Fix fb_defio bug in udlfb for multiple framebuffers

Previously when using fb_defio with multiple DisplayLink attached displays
udlfb incorrectly used a shared datastructure where it needed to have
one per fb_info struct. This was completely broken and caused all kinds of
problems, including rendering to one framebuffer affecting others.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 19:45:59 -07:00
Michael Prokop
d5fa13361b Staging: cxt1e1: Kconfig: SBE_PMCC4_NCOMM can not be compiled as module, adjust help description
The Kconfig description for CONFIG_SBE_PMCC4_NCOMM says:

  If you have purchased this optional support you must say Y or M
  here to allow the driver to operate with the NCOMM product.

This is not correct as it can not be built as module,
this patch updates the description accordingly.

Signed-off-by: Michael Prokop <mika@grml.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:59:56 -07:00
Julia Lawall
d6269644e1 Staging: comedi: Fix unsigned return type
In each case, the function has an unsigned return type, but returns a
negative constant to indicate an error condition.  For move_block_from_dma,
there is only one call and the return value is dropped, so it need not be
unsigned.  For labpc_eeprom_write, there is only one call and the result is
stored in a signed variable, so again the unsigned return type is not
necessary.

A sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@exists@
identifier f;
constant C;
@@

 unsigned f(...)
 { <+...
*  return -C;
 ...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:59:55 -07:00
Vasiliy Kulikov
7b1f6bfb03 staging: westbridge: improve error path
kmalloc() may fail, check for it.
Allocated memory is not freed.
Use IS_ERR() instead of strict checking.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:59:54 -07:00
Vasiliy Kulikov
ec53d6123b staging: ath6kl: check return code of get_user and put_user
Function get_user may fail. Check for it.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:59:53 -07:00
Vasiliy Kulikov
81604d43ad staging: comedi: check return code of put_user
Function put_user may fail. Check for it.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:59:51 -07:00
Vasiliy Kulikov
b04462a143 staging: tidspbridge: check return code of get_user
Function get_user may fail. Check for it.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:59:50 -07:00
Vasiliy Kulikov
2fac6c290f staging: rtl8192u: improve error path
Functions alloc_ieee80211 and register_netdev may fail. Check for it.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:59:50 -07:00
Vasiliy Kulikov
e5a7dc54ee staging: tidspbridge: check return code of kzalloc
Function kzalloc may fail. Check for it.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:59:49 -07:00
Bernie Thompson
d5ed54322e staging: udlfb: add module options for console and fb_defio
Add module options for console and fb_defio

Convert fb_defio on/off switch to module option and add console option.

>From the command line, pass options to modprobe
modprobe udlfb defio=1 console=1

Or for permanent option, create file like /etc/modprobe.d/options with text
options udlfb defio=1 console=1

Accepted options:

fb_defio	Make use of the fb_defio (CONFIG_FB_DEFERRED_IO) kernel
		module to track changed areas of the framebuffer by page faults.
        	Standard fbdev applications that use mmap but that do not
		report damage, may be able to work with this enabled.
		Disabled by default because of overhead and other issues.

console		Allow fbcon to attach to udlfb provided framebuffers. This
		is disabled by default because fbcon will aggressively consume
		the first framebuffer it finds, which isn't usually what the
		user wants in the case of USB displays.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:22 -07:00
Bernie Thompson
8ef8cc4fca staging: udlfb: support for writing backup EDID to sysfs file
Support writing default/backup edid via /sys/class/graphics/fb?/edid

Writing a backup edid blob to the 'edid' file will cause udlfb to
attempt to re-read the edid from hardware.
If we still don't have a good edid, it will use the backup edid instead.
The intent is to 1) enable user-supplied edid
2) enable udev rules to backup the last known good edid
for a device, and then provide that edid as a backup for all future starts

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:21 -07:00
Bernie Thompson
1572f91cff staging: udlfb: fix big endian rendering error
Fix big endian rendering bug (affects PowerPC)

Thanks to Christian Melki at Ericsson for finding and suggesting patch.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:20 -07:00
Bernie Thompson
18dffdf891 staging: udlfb: enhance EDID and mode handling support
Enhance EDID and mode table handling

* Adds support for lower-end DL chips on higher-end monitors
* Adds support for using fbdev standard EDID parsing and handling
* Adds support for more dynamic reallocation of framebuffer, based on new EDID

Queries EDID from hardware with several retries then
queries DisplayLink chip for max pixel area via vendor descriptor.
Uses existing fbdev mode handling service funcations to build mode list
of common modes between adapter and monitor.
This enables lower-end chips (e.g. DL-125) to successfully pick a compatible
mode on higher end monitors (e.g. whose default mode is over 1280x1024).
Reallocate framebuffer if necessary in response to new max mode.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:19 -07:00
Bernie Thompson
33077b8d30 staging: udlfb: revamp reference handling to insure successful shutdown
Revamp reference handling and synchronization for unload/shutdown

Udlfb is a "virtual" framebuffer device that really exists on
two separate stacks: at the bottom of the framebuffer interface,
and on top of USB.  During unload, there's no guarantee which
one will tear down first. So reference counting must be solid
to handle all possibilities and not access anything once its gone.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:18 -07:00
Bernie Thompson
f11f4bc027 staging: udlfb: remove metrics_misc sysfs attribute
Remove metrics_misc sysfs attribute

Previously returned multiple values, which goes against sysfs guidelines.
Had been used for debugging to figure out which of the multiple
fbdev interfaces an app was using, but log file messages are sufficient.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:17 -07:00
Bernie Thompson
9825f70f5c staging: udlfb: add DPMS support
Add ability to power off monitor with standard blanking interface

Used by X servers and others to manage power of dislpay

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:16 -07:00
Bernie Thompson
d46ecb9f79 staging: udlfb: fbdev character read and write support
Restore fbdev character read and write support

Enables access to the framebuffer from simple reads and writes
to /dev/fb0 (or fb1, ...). Low performance, because of extra copy
and because udlfb must scan every pixel for changes. But very
useful for testing and simple image display, etc.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:15 -07:00
Bernie Thompson
df9be302a2 staging: udlfb: Add intro udlfb documentation
Add documentation for the udlfb framebuffer driver for DisplayLink devices.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-05 16:50:14 -07:00
Henrik Rydberg
f4ccbef288 Input: wacom - add a quirk for low resolution Bamboo devices
The Bamboo Touch reports a sub-screen resolution of 480x320.  The
signal-to-noise ratio is only about 100, so filtering is needed in
order to reduce the jitter to a usable level. However, the low
resolution leads to round-off errors in the EWMA filter, resulting in
extremely jerky pointer motion. This patch explicitly sets a higher
resolution for those devices, and tells this to the completion handler
via a low-resolution quirk.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:58:22 -07:00
Henrik Rydberg
cb734c0368 Input: wacom - add support for the Bamboo Touch trackpad
Add support for the Bamboo Touch trackpad, and make it work with
both the Synaptics X Driver and the Multitouch X Driver. The device
uses MT slots internally, so the choice of protocol is a given.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:58:17 -07:00
Henrik Rydberg
bc73dd39e7 Input: wacom - collect device quirks into single function
Collect device-specific code into a single function, and use quirks to
flag specific behavior instead.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:58:12 -07:00
Ping Cheng
4a88081e73 Input: wacom - parse the Bamboo device family
The Bamboo devices have multiple interfaces which need to be setup
separately. Use the HID parsing mechanism to achieve that.

Signed-off-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:58:03 -07:00
Henrik Rydberg
fed87e655a Input: wacom - add fuzz parameters to features
The signal-to-noise ratio varies between devices, but currently all
devices are treated the same way. Add fuzz parameters to the feature
struct, allowing for tailored treatment of devices.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:57:58 -07:00
Dmitry Torokhov
92944c1c94 Merge branch 'mrst-touchscreen' into next
Conflicts:
	drivers/input/touchscreen/Makefile
2010-09-05 12:20:24 -07:00
Sundar R Iyer
7768651797 Input: add support for PowerOn button on the AB8500 MFD
Add the PowerOn (PonKey) button support to detect power on/off events.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:19:10 -07:00
Dmitry Torokhov
144c0f8833 Input: fix a few typos
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:15:14 -07:00
Eric Millbrandt
eb54ddd4d7 Input: wm97xx-core - add retries to wm97xx_read_aux_adc
Add logic to wm97xx_read_aux_adc() to retry reading the adc if the
sample failed.  This could occur if the previous sample was still in
the return register or the sample timed-out.  Also avoid a pathologic
failure mode by disabling the digitizer and returning -EBUSY after 5
retries.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:14:36 -07:00
Axel Lin
d3622e6f05 Input: wm97xx-core - simplify error path in wm97xx_probe()
Use platform_device_del() instead of platform_device_unregister() in error
handling path.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Mark Brown <broonie@opensoruce.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:12:57 -07:00
Axel Lin
cdd194779b Input: stmpe-ts - return -ENOMEM when memory allocation fails
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:09:12 -07:00
Saurav Kashyap
bcc5b6d323 [SCSI] qla2xxx: AER Support-Return recovered from mmio_enable function for 82XX.
Return recovered from pci_mmio_enabled function if it is 82XX.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:36:28 -03:00
Giridhar Malavali
58548cb51a [SCSI] qla2xxx: Increase SG table size to support large IO size per scsi command.
The sg table size is increased from 128 to 1024 to support multiple sg lists
and number of sg elements per scsi command.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:36:25 -03:00
Giridhar Malavali
3fadb80b0f [SCSI] qla2xxx: Clear local references of rport on device loss timeout notification from FC transport.
The clearing of local references to rport was blocked when abort is
active. This code clears the local references unconditionaly upon
device loss timeout callback from FC transport.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:36:21 -03:00
Madhuranath Iyengar
b1d46989c1 [SCSI] qla2xxx: Handle MPI timeout indicated by AE8002
In case the MPI times out, the FW issues an async event AE8002
to indicate this to every FCoE function. The FC/FCoE driver is
required to handle this, by doing a soft reset and issuing a
Write MPI register mailbox command to reset the MPI.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:35:01 -03:00
Lalit Chandivade
bddd2d65a4 [SCSI] qla2xxx: Update to AER support, do early abort commands.
Currently the IOs are returned back in slot reset, this
could be late and can cause error handler to invoke.
If error handler invokes, eh_abort fails and escalate to
device/bus/host resets causing issues.
The commands need to be returned back to upper layer in
io_error_detected.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:35:00 -03:00
Giridhar Malavali
77e334d240 [SCSI] qla2xxx: Cleanup some dead-code and make some functions static.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:34:58 -03:00
Giridhar Malavali
35e0cbd4b2 [SCSI] qla2xxx: Return proper fabric name based on device state.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:34:56 -03:00
Lalit Chandivade
a5b3632191 [SCSI] qla2xxx: Added AER support for ISP82xx.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:33:07 -03:00
Giridhar Malavali
6dbdda4d59 [SCSI] qla2xxx: Pass first 64 bytes of MBX information when vendor commands fail.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:33:03 -03:00
Giridhar Malavali
c9afb9a24d [SCSI] qla2xxx: Don't issue set or get port param MBC if port is not online.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 15:33:00 -03:00