Commit graph

691,473 commits

Author SHA1 Message Date
Anton Blanchard
28b549905b powerpc: Check end of stack canary at oops time
Add a check for the stack canary when we oops, similar to x86. This should make
it clear that we overran our stack:

Unable to handle kernel paging request for data at address 0x24652f63700ac689
Faulting instruction address: 0xc000000000063d24
Thread overran stack, or stack corrupted

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-02 14:07:30 +10:00
Anton Blanchard
f89451fbd2 powerpc: Feature nop out reservation clear when stcx checks address
The POWER architecture does not require stcx to check that it is operating
on the same address as the larx. This means it is possible for an
an exception handler to execute a larx, get a reservation, decide
not to do the stcx and then return back with an active reservation. If the
interrupted code was in the middle of a larx/stcx sequence the stcx could
incorrectly succeed.

All recent POWER CPUs check the address before letting the stcx succeed
so we can create a CPU feature and nop it out. As Ben suggested, we can
only do this in our syscall path because there is a remote possibility
some kernel code gets interrupted by an exception that ends up operating
on the same cacheline.

Thanks to Paul Mackerras and Derek Williams for the idea.

To test this I used a very simple null syscall (actually getppid) testcase
at http://ozlabs.org/~anton/junkcode/null_syscall.c

I tested against 2.6.35-git10 with the following changes against the
pseries_defconfig:

CONFIG_VIRT_CPU_ACCOUNTING=n
CONFIG_AUDIT=n
CONFIG_PPC_4K_PAGES=n
CONFIG_PPC_64K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PPC_SUBPAGE_PROT=n
CONFIG_FUNCTION_TRACER=n
CONFIG_FUNCTION_GRAPH_TRACER=n
CONFIG_IRQSOFF_TRACER=n
CONFIG_STACK_TRACER=n

to remove the overhead of virtual CPU accounting, syscall auditing and
the ftrace mcount tracers. 64kB pages were enabled to minimise TLB misses.

POWER6: +8.2%
POWER7: +7.0%

Another suggestion was to use a larx to something in the L1 instead of a stcx.
This was almost as fast as removing the larx on POWER6, but only 3.5% faster
on POWER7. We can use this to speed up the reservation clear in our
exception exit code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-02 14:07:30 +10:00
Anton Blanchard
8c77391475 powerpc: Add 64bit csum_and_copy_to_user
This adds the equivalent of csum_and_copy_from_user for the receive side so we
can copy and checksum in one pass. It is modelled on the generic checksum
routine.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-02 14:07:30 +10:00
Anton Blanchard
fdd374b62c powerpc: Optimise 64bit csum_partial_copy_generic and add csum_and_copy_from_user
We use the same core loop as the new csum_partial, adding in the
stores and exception handling code. To keep things simple we do all the
exception fixup in csum_and_copy_from_user. This wrapper function is
modelled on the generic checksum code and is careful to always calculate
a complete checksum even if we only copied part of the data to userspace.

To test this I forced checksumming on over loopback and ran socklib (a
simple TCP benchmark). On a POWER6 575 throughput improved by 19% with
this patch. If I forced both the sender and receiver onto the same cpu
(with the hope of shifting the benchmark from being cache bandwidth limited
to cpu limited), adding this patch improved performance by 55%

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-02 14:07:30 +10:00
Anton Blanchard
9b83ecb0a3 powerpc: Optimise 64bit csum_partial
The main loop of csum_partial runs very slowly on recent POWER CPUs. After some
analysis on both POWER6 and POWER7 I came up with routine below. First we get
the source aligned to a double word, ignoring any odd alignment to keep things
simple. Then we do 64 bytes at a time, with an entry and exit limb of a further
64 bytes. On both POWER6 and POWER7 this should be as fast as we can go since
we are limited by the latency of the adde instructions.

To test this I forced checksumming on over loopback and ran socklib (a
simple TCP benchmark). On a POWER6 575 throughput improved by 11% with
this patch.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-02 14:07:29 +10:00
Alex Deucher
ea39302b87 drm/radeon/kms/evergreen: work around bad data in some i2c tables
The 7th entry in a lot of evergreen i2c gpio tables is partially
zeroed.  Fix the entry.

Should fix the missing ddc entry in:
https://bugs.freedesktop.org/show_bug.cgi?id=29255

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-02 12:45:43 +10:00
Dmitry Torokhov
d4f5f937c3 Input: mrst-touchscreen - move out of staging
The driver is in reasonable shape now so let's move it out of staging.

Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-01 19:43:36 -07:00
Andy Ross
a9cfa2537c Staging: mrst-touchscreen - simplify en/disable of interrupts for NEC
Use 8 bit update commands instead of a 16 bit unaligned read/write
pair which fails after the first few calls; the voodoo in the original
doesn't seem to be required with this mechanism.

Tested-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-01 19:43:30 -07:00
Arjan van de Ven
409d568dc5 Staging: mrst-touchscreen - fix channel allocation
The touch screen driver tries to find a range of free channels (which
are an array of bytes), by scanning for the "end of used channel" marker.
However it tries to be WAAAAY too smart and does 32 bit logic on 8 bit
quantities, and in the process completely gets it wrong
(repeatedly read the same register instead of incrementing in the loop,
assuming that if any of the 4 bytes in the 32 byte quantity is free,
all four are free, returning the channel number divided by 4 rather than
the actual first free channel number)

On the setting side, the same mistakes are made by and large; changed
this to just use the byte SCU write functions....

With these fixes we go from a completely non detected touchscreen to
something that appears to completely get detected.
(after also fixing the ordering issue that Jacobs patch should solve)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-01 19:43:22 -07:00
Alek Du
36466a1b45 Staging: mrst-touchscreen - register platform interface
AC: Reworked to merge with upstream input device work from Dmitry et al.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-01 19:43:15 -07:00
Dmitry Torokhov
95b7127c11 Staging: mrst_touchscreen - more fixes
Changes:

 - switch to use threaded IRQ
 - more __devinit/__devexit annotations
 - rely on input core to remove jitter from events
 - global pointer removed
 - NEC/MAXIM/Freescale handling factored out

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-01 19:43:08 -07:00
Alan Cox
aff4c34361 Staging: mrst_touchscreen - clean up input side
Fix most of the stuff that Dmitry pointed out. This leaves the mutex in IRQ
and misuse of SPI to sort out.

Also fix the build bits so it actually builds in staging - whoops.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-01 19:43:02 -07:00
David S. Miller
3e502e6358 starfire: Temporary kludge to fix powerpc build.
Add a dma_addr_t 64-bit case for powerpc with 64-bit phys addresses.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 19:19:54 -07:00
Eric Dumazet
3d3be4333f gro: fix different skb headrooms
Packets entering GRO might have different headrooms, even for a given
flow (because of implementation details in drivers, like copybreak).
We cant force drivers to deliver packets with a fixed headroom.

1) fix skb_segment()

skb_segment() makes the false assumption headrooms of fragments are same
than the head. When CHECKSUM_PARTIAL is used, this can give csum_start
errors, and crash later in skb_copy_and_csum_dev()

2) allocate a minimal skb for head of frag_list

skb_gro_receive() uses netdev_alloc_skb(headroom + skb_gro_offset(p)) to
allocate a fresh skb. This adds NET_SKB_PAD to a padding already
provided by netdevice, depending on various things, like copybreak.

Use alloc_skb() to allocate an exact padding, to reduce cache line
needs:
NET_SKB_PAD + NET_IP_ALIGN

bugzilla : https://bugzilla.kernel.org/show_bug.cgi?id=16626

Many thanks to Plamen Petrov, testing many debugging patches !
With help of Jarek Poplawski.

Reported-by: Plamen Petrov <pvp-lsts@fs.uni-ruse.bg>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 19:17:35 -07:00
David S. Miller
87f94b4e91 bridge: Clear INET control block of SKBs passed into ip_fragment().
In a similar vain to commit 17762060c2
("bridge: Clear IPCB before possible entry into IP stack")

Any time we call into the IP stack we have to make sure the state
there is as expected by the ipv4 code.

With help from Eric Dumazet and Herbert Xu.

Reported-by: Bandan Das <bandan.das@stratus.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 19:17:34 -07:00
Alex Deucher
9534787186 drm/radeon/kms: properly set crtc high base on r7xx
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-02 11:29:14 +10:00
Alex Deucher
cf4c12f9a2 drm/radeon/kms: fix tv module parameter
The tv parameter was added to disable the tv-out connector,
however, it caused a crash if it was set to 0 due to
drm_connector_init not getting called.  If tv=0, don't
attempt to add the connector.

Might fix:
https://bugzilla.kernel.org/show_bug.cgi?id=17241

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-02 11:29:04 +10:00
Alex Deucher
0d9958b18e drm/radeon/kms: force legacy pll algo for RV515 LVDS
There has been periodic evidence that LVDS, on at least some
panels, prefers the dividers selected by the legacy pll algo.
This patch forces the use of the legacy pll algo on RV515
LVDS panels.  The old behavior (new pll algo) can be selected
by setting the new_pll module parameter to 1.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-02 11:28:58 +10:00
Alex Deucher
0b3b4fea0a drm/radeon/kms: remove useless clock code
This code was originally for forcing some clocks on certain asics.
However, this code was later moved to asic specific functions
for all of the affected asics.  The only users of the original
code at this point were r600, rv770, and evergreen and the code
was not relevant for those asics.  So, remove it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-02 11:28:52 +10:00
Gerrit Renker
0705c6f0e2 tcp: update also tcp_output with regard to RFC 5681
Thanks to Ilpo Jarvinen, this updates also the initial window
setting for tcp_output with regard to RFC 5681.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 18:15:00 -07:00
stephen hemminger
fa50d64576 net: make rx_queue sysfs_ops const
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 18:12:20 -07:00
Ben Hutchings
24cd804d1d 3c59x: Remove incorrect locking; correct documented lock hierarchy
vortex_ioctl() was grabbing vortex_private::lock around its call to
generic_mii_ioctl().  This is no longer necessary since there are more
specific locks which the mdio_{read,write}() functions will obtain.
Worse, those functions do not save and restore IRQ flags when locking
the MII state, so interrupts will be enabled when generic_mii_ioctl()
returns.

Since there is currently no need for any function to call
mdio_{read,write}() while holding another spinlock, do not change them
to save and restore IRQ flags but remove the specification of ordering
between vortex_private::lock and vortex_private::mii_lock.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 18:01:55 -07:00
Nathan Fontenot
93f68f1ef7 powerpc/pseries: Correct rtas_data_buf locking in dlpar code
The dlpar code can cause a deadlock to occur when making the RTAS
configure-connector call.  This occurs because we make kmalloc calls,
which can block, while parsing the rtas_data_buf and holding the
rtas_data_buf_lock.  This an cause issues if someone else attempts
to grab the rtas_data_bug_lock.

This patch alleviates this issue by copying the contents of the rtas_data_buf
to a local buffer before parsing.  This allows us to only hold the
rtas_data_buf_lock around the RTAS configure-connector calls.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-09-02 10:07:38 +10:00
Erik Gilling
a9d8fb4d09 [ARM] tegra: Add ZRELADDR default for ARCH_TEGRA
fixes the warning:
.config:369:warning: symbol value '' invalid for ZRELADDR

and the prompt for ZRELADDR on make

Signed-off-by: Erik Gilling <konkers@android.com>
2010-09-01 14:58:53 -07:00
stephen hemminger
de6be6c1f7 sky2: don't do GRO on second port
There's something very important I forgot to tell you.
 What?

 Don't cross the GRO streams.
 Why?

 It would be bad.
 I'm fuzzy on the whole good/bad thing. What do you mean, "bad"?

 Try to imagine all the Internet as you know it stopping instantaneously
  and every bit in every packet swapping at the speed of light.
 Total packet reordering.
 Right. That's bad. Okay. All right. Important safety tip. Thanks, Hubert

The simplest way to stop this is just avoid doing GRO on the second port.
Very few Marvell boards support two ports per ring, and GRO is just
an optimization.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 14:49:33 -07:00
Huang Weiyi
6267300e97 pxa168_eth: remove duplicated #include
Remove duplicated #include('s) in
  drivers/net/pxa168_eth.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 14:33:47 -07:00
Nicolas Dichtel
750e9fad8c ipv4: minor fix about RPF in help of Kconfig
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 14:29:36 -07:00
Nicolas Dichtel
928497f020 xfrm_user: avoid a warning with some compiler
Attached is a small patch to remove a warning ("warning: ISO C90 forbids
mixed declarations and code" with gcc 4.3.2).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 14:29:35 -07:00
Michal Soltys
3b2eb6131e net/sched/sch_hfsc.c: initialize parent's cl_cfmin properly in init_vf()
This patch fixes init_vf() function, so on each new backlog period parent's
cl_cfmin is properly updated (including further propgation towards the root),
even if the activated leaf has no upperlimit curve defined.

Signed-off-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 14:29:35 -07:00
Denis Kirjanov
9c01ae58d4 pxa168_eth: fix a mdiobus leak
mdiobus resources must be released on exit

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 14:29:34 -07:00
Jeff Mahoney
0f04cfd098 net sched: fix kernel leak in act_police
While reviewing commit 1c40be12f7, I
 audited other users of tc_action_ops->dump for information leaks.

 That commit covered almost all of them but act_police still had a leak.

 opt.limit and opt.capab aren't zeroed out before the structure is
 passed out.

 This patch uses the C99 initializers to zero everything unused out.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 14:29:34 -07:00
Eric Dumazet
78b620ce9e vhost: stop worker only if created
Its currently illegal to call kthread_stop(NULL)

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 14:26:13 -07:00
Ingo Molnar
b4c69d45c4 Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent 2010-09-01 22:31:07 +02:00
John W. Linville
85f72bc839 mac80211: only cancel software-based scans on suspend
Otherwise the hardware scan handler could access an invalid scan request
structure.  The driver should cancel any pending hardware scans during
the suspend process anyway, so also add a warning if the hardware scan
is still pending when the device resumes.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-01 16:12:28 -04:00
Breno Leitao
aa8a9e25c5 MAINTAINERS: Add ehea driver as Supported
This change just add the IBM eHEA 10Gb network drivers as supported.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 13:10:53 -07:00
Robert Richter
269f45c250 oprofile, x86: fix init_sysfs() function stub
The use of the return value of init_sysfs() with commit

 10f0412 oprofile, x86: fix init_sysfs error handling

discovered the following build error for !CONFIG_PM:

 .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’:
 .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’
 make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1
 make[1]: *** [arch/x86/oprofile] Error 2

This patch fixes this.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-01 21:23:01 +02:00
David S. Miller
a3f86ec002 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-09-01 12:01:05 -07:00
Ian Lartey
2d98dae206 wm831x_power: Remove duplicate chg mask
Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-01 22:35:06 +04:00
Eric Dumazet
6602cebb5b net: skbuff.c cleanup
(skb->data - skb->head) can be changed by skb_headroom(skb)

Remove some uses of NET_SKBUFF_DATA_USES_OFFSET, using
(skb_end_pointer(skb) - skb->head) or
(skb_tail_pointer(skb) - skb->head) : compiler does the right thing,
and this is more readable for us ;)

(struct skb_shared_info *) casts in pskb_expand_head() to help memcpy()
to use aligned moves.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:57:55 -07:00
Eric Dumazet
86cac58b71 skge: add GRO support
- napi_gro_flush() is exported from net/core/dev.c, to avoid
  an irq_save/irq_restore in the packet receive path.
- use napi_gro_receive() instead of netif_receive_skb()
- use napi_gro_flush() before calling __napi_complete()
- turn on NETIF_F_GRO by default
- Tested on a Marvell 88E8001 Gigabit NIC

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:57:55 -07:00
Julia Lawall
aed5029ead drivers/net/can/mscan/mpc5xxx_can.c: Add of_node_put to avoid memory leak
Add a call to of_node_put in the error handling code following a call to
of_find_matching_node.

This patch also moves the existing call to of_node_put after the call to
iounmap in the error handling code, to make it possible to jump to
of_node_put without doing iounmap.  These appear to be disjoint operations,
so the ordering doesn't matter.

This patch furthermore changes the -ENODEV result in the error handling
code for of_find_matching_node to a return of 0, as found in the error
handling code for of_iomap, because the return type of the function is
unsigned.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E,E1,E2;
statement S;
@@

*x =
(of_find_node_by_path
|of_find_node_by_name
|of_find_node_by_phandle
|of_get_parent
|of_get_next_parent
|of_get_next_child
|of_find_compatible_node
|of_match_node
|of_find_node_by_type
|of_find_node_with_property
|of_find_matching_node
|of_parse_phandle
)(...);
...
if (x == NULL) S
<... when != x = E
*if (...) {
  ... when != of_node_put(x)
      when != if (...) { ... of_node_put(x); ... }
(
  return <+...x...+>;
|
*  return ...;
)
}
...>
(
E2 = x;
|
of_node_put(x);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:57:54 -07:00
Denis Kirjanov
1a9f28c8f9 ns83820: Use helper to disable chip interrupts
Use helper routine to disable chip interrupts.

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:57:54 -07:00
Eric Dumazet
875168a933 net: tunnels should use rcu_dereference
tunnel4_handlers, tunnel64_handlers, tunnel6_handlers and
tunnel46_handlers are protected by RCU, but we dont use appropriate rcu
primitives to scan them. rcu_lock() is already held by caller.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:57:53 -07:00
Yaniv Rosner
0642701326 bnx2x: Update version to 1.52.53-5
Update version to 1.52.53-5

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:44:35 -07:00
Yaniv Rosner
9a8a97e88e bnx2x: Add BCM84823 to the supported PHYs
Add BCM84823 to the supported PHYs

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:44:34 -07:00
Yaniv Rosner
a1e4be39dc bnx2x: Change BCM848xx LED configuration
Change 848xx LED configuration according to the new microcode (Boards
were shipped with only with the new microcode)

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:44:34 -07:00
Yaniv Rosner
6f4ca066bc bnx2x: Remove unneeded setting of XAUI low power to BCM8727
Remove unneeded setting of XAUI low power to BCM8727. This was required
only in older microcode which is not in the field.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:44:33 -07:00
Yaniv Rosner
ac4d944910 bnx2x: Change BCM848xx configuration according to IEEE
Change BCM848xx behavior to fit IEEE such that setting 10Mb/100Mb will
use force speed, and setting 1Gb/10Gb will use auto-negotiation with the
specific speed advertised

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:44:33 -07:00
Yaniv Rosner
54c2fb7859 bnx2x: Reset link before any new link settings
Reset link before any new link settings to avoid potential link issue
caused by previous link settings

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:44:32 -07:00
Yaniv Rosner
eb80ce740a bnx2x: Fix potential link issue In BCM8727 based boards
In BCM8727 based boards, setting default 10G link speed after link was
set to 1G may lead to link down issue. The problem was setting the right
value, but to the wrong registers

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01 10:44:31 -07:00